CentOS 5 Server :: Setup FTP Access To Server?
Aug 20, 2009i try slicehost out with CentOS5, What is the right direction to setup FTP access to my server?
View 1 Replies
ADVERTISEMENT
CentOS 5 Server :: MySQL Server Setup For Remote Access
May 4, 2009I have just installed CentOS 5. I have set mysql database to access from remote machines. But now the problem is it is not connecting from the local machine now.
View 5 Replies View RelatedServer :: Setup VSFTPD On Centos 5 To Access /var/www/ Directly
Sep 26, 2010Trying to set up VSFTPD on the CentOS 5 box at work, which is an internal web development server. I'm leaving soon, and all knowledge of or desire to learn SSH is going with me so the other employees will need to be able to access the web root using FTP clients.
Essentially there is no need for special user accounts or privileges, it's an internal server in a tiny company. I've got the LocalRoot set to /var/www/ which I can log in to and read all files via FTP, however despite setting everything to 777 in /var/www/ and below, I still can't get any write privileges on the FTP server.
Server :: Setup RAID 1 On CentOS 5 Server For A Zimbra Email Server
Feb 7, 2011I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies View RelatedServer :: Unable To Setup A NIS Server Setup On CentOS System
Jan 19, 2010We are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
General :: Setup Remote Access Server On Red Hat Enterprise Server Release 5.1?
Aug 30, 2009how i have a machine installed Red Hat Enterprise Linux Server release 5.1 with 2 modem (usb & com port) still i want to configure RAS server so some pple able to connect my server and send me some files.
View 4 Replies View RelatedServer :: Setup An Incoming And Outgoing Mail Server On Centos?
Feb 22, 2010What is the easiest way to setup an incoming and outgoing mail server on centos? Without using a control panel, such was webmin.
View 2 Replies View RelatedSoftware :: Get An X Window Server Setup On My CentOS 5.3 Server Rack?
Jan 5, 2010I am trying to get an X window server setup on my CentOS 5.3 server rack. I have gotten as far as to doing:
yum groupinstall "X Window Sever" "GNOME Desktop Environment"
EDIT-Forgot to mention that I did Xorg -configure before testing the config. Only errors I got were:
(EE) LoadModule: Module ati_r500 does not have a ati_r500ModuleData data object.
(EE) Failed to load module "ati_r500" (invalid module, 0)
[Code]...
Linuxquestions--I posted this over on the CentOS forums, which are not as booming. Then I remembered these forums for when I had my VPS way back when and you guys were pretty helpful, of course expected me to mostly do my own reading which I dont mind its just having a hard time understanding some of the things in what I was reading. I even believe I came here with this problem before but abandoned the issue because my VPS was not powerful enough or something of the sort, but this was many years ago also on CentOS using apt. Now using yum which I like much better.
CentOS 5 Server :: Email Server Setup Using Sendmail And Dovecot?
Apr 24, 2009I am trying to set up a mail server on centos5 using sendmail and dovecot, and eventually spamassassin and some antivirus filter as well. I'd also like to get the proper secure auth mechanism set up at some point too. But for starters, I've been having a lot of difficulty trying to even connect to the mail server from a client computer in the local network. I installed Eudora on the client and after some tweaking in dovecot I was able to connect to the mail server, but then when I try to send an email I get a "connection refused" error, with nothing being logged on the server that I can see.
The last time I set up a mail server was Fedora Core 2, so the configuration files have changed a bit to say the least, and I can't really refer back to those to set up this new server. Does anybody know of a good step-by-step doc on getting the mail server going? I've read the man pages and other various readme's, but these really only list out the available options with no really good explanation of what needs to be done to get the mail server going. If there isn't a full write-up on how to do this, I'll put something together when I'm finished so others can use it in the future.
CentOS 5 :: Easiest Way To Mirror Existing Server Setup On A New Server?
Jan 13, 2011We have two CentOS 5 servers in production (web and database). We are setting up a single staging server that will mirror the configurations of these servers as closely as possible. What is the easiest way to ensure the exact same software and configs as the production servers are setup on the new staging server. Our contracted data center provider has already informed us that they do not perform images and NO we do not have physical access to the machines. It is undetermined whether we will be virtualizing the staging server into two virtual servers yet, so for the purposes of this post lets assume we are not. I'm seeking a faster/more precise method than doing this by eye and hand.
Some information on our web server code...
Server :: Centos Virtual Server Mail Setup ?
Nov 3, 2010I just recently purchased a vs from a company and i am trying to set up a web site on it with kloxo and set up the mail for it upon setting up the mail settings it says:
"It is very essential that you set the my name to a properly resolvable hostname, since otherwise, many public mailservers like hotmail will reject mails from your server"
Now this is my first time setting up a vs before i have set up linux vm's to get email access but that was about a year ago.
CentOS 5 Server :: Mysql-server How To Setup Password
Aug 30, 2009i try to install mysql-server how do i create a password for it
yum install mysql mysql-server
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.optus.net
* updates: mirror.optus.net
[Code]...
Server :: CentOS Ldap Server Setup
Jul 11, 2011I am currently involved in setting up an openldap server on a CentOS platform. I am having some issues with getting it set up to the point that I can remotely manage the server via phpldapadmin in a web browser. I am running into an issue when starting the slapd daemon.
See the output below to better understand:
Server :: Nagios Server Setup In Centos 5.3
Aug 13, 2010I have installed the nagios by FAN 2.0 CD. In this distro all the required softwares are bundled. Now i do not know where to start. How can i monitor my other server on the network. I have google on the internet but it is not giving the clear idea. Is there any document on the net or how to which can show that how to configure nagios with centreon or originally from changing nagios files.
View 6 Replies View RelatedServer :: Using CentOs On A Remote Server But Can't Access PhpmyAdmin
Oct 25, 2010Im using CentOs on a remote server. I've recently installed phpmyadmin but cant access from [URL] I checked the files and found only 3 folders in /var/lib/phpmyadmin -config / save / upload - all of them empty. Whenever I try intstall phpmyadmin again it just says its already installed and up to day.
View 2 Replies View RelatedCentOS 5 Server :: Ftp Server With Folder Access Restrictions
Dec 10, 2010'm a bit familiar with Centos as I have set up few website on this environment but I have never actually installed, and especially, configure ftp server. Now I need to do this. Simply I need to be able to create an access account for a user and then restrict access to only one folder within the website (idea is to allow this user to upload images via ftp). I did google for ftp servers and read about vsftpd but I couldn't find any tutorial on how exactly make it work with folders and specific users.
View 3 Replies View RelatedCentOS 5 Server :: Cannot Access Web Server From Outside Server
Apr 1, 2010I know am going to sound silly but got to ask the following.I have been using Ubuntu for several years successfully & want to switch my five servers to Centos 5.4.I have installed a working version but I seemed to be missing something & cannot find anything on the net.
Background -
a) Running Vmware 2.0
b) installed Centos 5.4 on a virtual server with 1024 meg memory and 40Gig oh HD
c) I can use printer on nework
d) I see folders on network
e) I can ping other devices/websites from Centos server and I can ping Centos server from other devices, share folders, etc
d) Installed Webmin successfully, I think.
e) I have several domain names registered and 5 static public IP addresses
Issue -
a) I cannot access web server from outside the server, in other words, much like in Ubuntu after all configuration has been done, I can go to any computer on network and type in http://192.168.1.100 and I'll return a test page that says IT WORKS!. is this done differently in Centos.
B) when I tried https:192.168.1.100:10000 to access webmin, again I get time out error.
Questions -
a) are there any settings am missing? obviously!
b) am I missing software? I hear you can install a Cpanel type software.
c) Is there a guide that can walk me through process to setup host names, domain name, IP addresses, etc
d) If you can give me steps to follow I can have something to do some research.
Ubuntu :: Can't Access Internet On Server Setup
Jul 8, 2011First off - I'm running 11.04 as a VPS on an OpenVZ.
I've set up a very basic environment of LAMP + mail server. Installing apache, php, mysql and proftpd all went fine, but whenever I install iRedMail (which is postfix + dovecot + clamav and few more packages) I lose the internet connection.
Although the server is easily reachable by ssh and http, I can't connect anywhere from the server. At first I thought it only had issues with resolving domain names, but now I see it doesn't even ping IPs as well.
Code:
# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
[Code]....
Server :: Setup Permissions For SSH Access To Apache?
Feb 23, 2010I am looking for the best way to set up permissions in the following situation. I have a web server set up on debian. I have different web sites in /var/www. Each web has a group of developers who each have system users and ssh access to the server. For example i have a web site in /var/www/example.com and a group of developers in group exampledev. I need all the users in exampledev plus the apache user (www-data) to have read write and execute permissions on all the content of the web site. I can give the group exampledev these permissions without a problem. The problem is that when they modify or create new files (they either connect via ssh o sftp which is the same right?) they are created with their user and group rather than exampledev. Am i going down the wrong path? This must be a common situation but i haven't found the solution.
View 5 Replies View RelatedCentOS 5 Server :: Named And Access Rights / SELinux - Access Denied
Aug 24, 2010I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies View RelatedCentOS 5 :: Setup The Centos Directory Server Without An Internet Connection?
Apr 20, 2010Is there any way to setup the Centos Directory Server without an internet connection?? i tried using the command: yum install centos-ds
but this just tries to connect to the internet to to download the packages. Is there a site where i can find the package so that i can copy it to my server and install it or is there some other way to do this?
Ubuntu Networking :: Setup Server As A Wireless Access Point?
Apr 2, 2011I'm trying to setup my ubuntu server as an access point but am running into some issues.
The server has an Atheros wireless card (AR5008 chipset) and I have used the following link to set it up in master mode using madwifi drivers: [URL]
I then used this link to set it upas an access point using hostapd. [URL]
But inspite of following the above steps, other wireless clients in my LAN are unable to see the ssid "Linuxmaster"
Although iwconfig shows that the card is in master mode.
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wifi0 no wireless extensions.
ath0 IEEE 802.11g ESSID:"Linuxmaster"
[Code].....
General :: Setup A Proxy Server To Block Access To Some Websites?
May 22, 2011i was tasked to setup a proxy server to block access to some websites. i'm using centOS 5 and Squid 7:2.6 STABLE21-6.e15...i appended the following and tested the configuration with the supposed server i am using and the it does seem to work but now i'm wondering how i can test it with a client computer..i have 2 LAN cards and i just connected the other to one PC (can a direct connection work or does it need to pass thru a switch or hub)...i just can't figure out how it should be... how do i configure the 2nd LAN card to use this computer as its proxy server?
View 8 Replies View RelatedCentOS 5 Server :: Cannot Access VMware Via Infrastructure Web Access
May 9, 2011I've recently installed CentOS 5, because I needed a good OS to run VMware Server. Just a heads up, I'm not very familiar with RH/CentOS distros, I usually use Arch Linux. My VMware install went fine, config is standard settings. Now I'm trying to access the VMware Infrastructure Web Access using port 8222 (http) and 8333 (https), but it's a no go. I'm connecting from another machine on the LAN, as the CentOS box is headless. I restarted the vmware services, and they seem to be launching fine. I don't know much about VMware though. I verified with netstat and ports 8222 and 8333 are listening.
View 3 Replies View RelatedServer :: Squid Access / Setup Automatically Get The Proxy Setting As Dhcp?
Jun 15, 2011I my office I have configure dhcp in my centos sever
eth0 for adsl-setup
eth1 for lan 172.16.0.4
I am using squid proxy server for internet access,
in my office all are using laptop through wifi , so i need to configure the browser proxy setting for accessing internet.
is there any way to setup automatically get the proxy setting as dhcp. I have tried transparent proxy but no success.
CentOS 5 Server :: How To Setup A Backup
Jun 27, 2011on my server I have atMail and a intranet site being hosted using mySQL for the database locally, and obviously backing it up would be a good thing. I got the backup package from the list if you use the add/remove software called dump-0.4.etc.. can't seem to find much on how to use it, set it up, nothing. Granted I could be looking for the wrong thing which I'm sure is the case. As of now it's looking like a USB drive is going to be my only option, that will change in the future as this "project" goes further (we are a windows shop trying out Linux, and the next step is going to be adding another server that's a file server at that point we'll probably go to NAS for the backup and then transer that to a USB for offsite/secondary backup).
View 2 Replies View RelatedServer :: Setup A CentOS 5.5 With IPSConfig?
Nov 2, 2010Have setup a CentOS 5.5 with IPSConfig that has been running for maybe 6 months, it was only intended to be a web server for multiple domains. Issue now is that a web developer has created a form that he is trying to email from the site, I did not have anything configured for mail and he does not care to write a script that would not require the mail service to be on the web server.
Have configured/reconfigured main.cf multiple times but no success.
Postfix appears to send the outbound email to the queue but never goes out. Have setup mail service for the domain "land***.com" in ISPConfig and tested with a single user created for the domain from the server.
What did I miss in the configuration to get "connection refused"?
Nov 2 11:27:19 WC01 postfix/cleanup[6711]: E4DFA1190011: message-id=<20101102162712.E4DFA1190011@WC01.nors***.com>
Nov 2 11:27:19 WC01 postfix/qmgr[6665]: E4DFA1190011: from=<admin@land***.com>, size=377, nrcpt=1 (queue active)
[Code].....
should I remove the domain from mail services and would postfix work on its own on a server with ISPConfig?
Server :: OpenGTS Setup In Centos 5.3
Dec 20, 2010I am trying to build a Vehicle Tracking System in Centos 5.3 with project OpenGTS [URL]. Here a very simple guide to setup guide. But according to the guide things are not working. The components of OpenGTS:
(1) Apache Ant
(2) Apache Tomcat
(3) Java
(4) Mysql
(5) Java Mail
(6) OpenGTS
In this whole project java installation is creating problem.
Server :: Setup An OpenVPN Using CentOS 5?
Dec 7, 2010I am trying to setup an OpenVPN server using CentOS 5. I ahve installed everything, configs are good, server starts fine. I have generated my certificates using the easy-rsa 2.0 included with OpenVPN. I have downloaded all the certificates to my machine and setup my client to connect. I am having that typical problem everyone seems to have where my client says certificate verify failed. However I can use openssl on the server to verify and it is ok. What am I doing wrong here?
Code:
[root@GSFOVPNxxx01 openvpn]# openssl verify -CAfile ca.crt gg-jbloomer.crt
gg-jbloomer.crt: OK
[root@GSFOVPNxxx01 openvpn]#
client output
Code:
2010-12-07 08:44:33 MANAGEMENT: CMD 'hold release'
[Code]...
I just dont get it, I have racked my brain and google until my eyes bleed and can not figure this one out.I am sure it is something simple that I am missing.
Server :: Setup Password-less Ssh On Two CentOS 5.5?
Apr 11, 2011I was able to setup password-less ssh on two CentOS 5.5 servers, I don't encounter any problem on root account but when I try on another user it fails and ask for a password
This what I've done.
centostest1 = Source
centostest2 = Destination
On Source Server (centostest1)
1. ssh-keygen
2. ssh-copy-id -i id_rsa root@centostest2
ssh-copy-id -i id_rsa user@centostest2
3. Now to test
ssh root@centostest2 <--- no problem, no password needed
ssh user@centostest2 <--- problem, it asked the password for user