I'm trying to get the NVIDIA drivers to work with xen but i still get it bombing out although I export IGNORE_XEN_PRESENCE=1. the error relates to some variables in nv.c nor being declared. I compiling against 2.6.18-164.el5xen with the NVIDIA-Linux-x86-185.18.36-pkg1.run driver.
View 2 RepliesSo I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
Today I finally could install Fedora 15 i686 in my now aging (2005) desktop computer (although I will always think of it as my "new machine", as long as I don't assemble a new one for me):
AMD Sempron 3100+ (1.8GHz)
1GB DDR400
120GB HDD
NVIDIA GeForce FX5200 (128MB)
After I installed F15 my initialpression was that it worked really good on that hardware: everything went fine with GNOME 3 for example,except for some lags in graphics rendering, which I thought would be solved after the graphics card's full power were unleashed with the proprietary NVIDIA driver.For starters I am not sure which Nvidia driver is right for my card (Nvidia 173.X or the regularvidia).I managed to get "working" the 173.X driver but the desktop is even less responsive to begin with, and there appears to be a lot of activity on the hard disk side.So, my question is, which could be causing the performance loss?
A. The "small" RAM.
B. The vintage graphics card.
C. Some problem in the hard drive.
D. A known bug.
I have Ubuntu 10.04 installed. Everything works fine until I enable the Nvidia drivers. When I enable the drivers and reboot the top and bottom panel stop displaying. If I issue command 'pkill gnome-panel' it all comes up and works correctly.
lspci output shows:
VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti 4400] (rev a2)
I am at a loss here as I am somewhat new to Ubuntu. Where to start looking for the problem? I've thought about setting up a startup script to run 'pkill gnome-panel' after I login, but that doesn't really fix the core of the problem.
After using Arch Linux for a while, I tried Ubuntu 11.04 again. Most of it was a pleasant surprise, except for the nvidia drivers. I currently have the nouveau drivers, but when I activate the nvidia drivers and reboot, it's installed but not in use. I figured I should run nvidia-xconfig (as suggested by nvidia-settings) but that makes my computer boot into a tty. Removing the /etc/X11/xorg.conf file makes it boot in nouveau again.
How do I install the Nvidia drivers? Ive tried the drivers from nvidia.com too, with the same results. I really want to be able to play my games, and nouveau just isnt going to cut it.
I am running kernel 2.6.32-23-generic-pae and since updating nvidia drivers do not work. I go into hardware drivers and activate but I get dropping to low resolution desktop or VGA not supported.
View 2 Replies View RelatedI have installed:
yum list installed kernel*
Loaded plugins: fastestmirror, kernel-module, kmod, priorities Installed Packages
kernel.i686 2.6.18-92.1.18.el5 installed
kernel.i686 2.6.18-92.1.22.el5 installed
kernel.i686 2.6.18-128.1.6.el5 installed
[code]....
The PC is a Toshiba laptop model# x205-s9359 running 11.2, KDE 4.3.5. Its video card is an nVidia 8700 GT. For two years now I've been plagued by random flashes, flickers and even missing scan lines on my screen when I use the nVidia drivers (up to and including 195.36.15), so lately I've been using the nv drivers. I miss the effects, etc. but I can live with that. At least I can get my work done, even if the display isn't as fancy as I'd like.
- When I run the nv drivers I can't suspend the PC to RAM or Disk. This means a lot of wasted time waiting for the machine to shut down and reboot every time I leave my desk for any length of time. If I try to suspend to RAM the only thing that happens is that the network connection disconnects then reconnects immediately. Here's the log file....
- If I try to suspend to Disk the PC appears to suspend as expected, but when it resumes it hangs before restarting X, and there's no keyboard or power button response. I have to use alt-prtsc-reisub to reboot. When the reboot is complete the screen shows all the windows, etc that were present before the suspend. Here's that log file....
-When I run the nVidia drivers the suspend/resume functions work perfectly, but I have to put up with all the problems described above. Here's the log file for Suspend to RAM with nVidia, and here's the one for Suspend to Disk.
I've spent hours searching for clues in these forums, on the openSUSE.org site in general, at KDE.org and with Google and I'm sorry to say that most of I've found is horribly out of date, and/or it's way over my head. or (worst of all) not even dated, so I've no idea whether it's current info relevant to my situation or so out of date that I might do real harm if I were to trust it. (RANT: Is it too hard to put a date on an article?... end of RANT) I'd be quite content to use the nv drivers if I could solve the power management issues, but I'd be equally happy to solve the flickering etc. with nVidia drivers.
There are currently two options for nVidia drivers in Lucid Lynx, 173, and current. With the video card in my laptop, 9650m GT, the 173 drivers work but Docky is painfully, unusably slow. With the "current" drivers, Docky is fine but I get progressively worse and worse static-type lines across my screen and eventually it the machine restarts itself. I've tried installing drivers manually but they won't compile against the kernel.
Before installing Lucid, I had 9.04 Jaunty installed, and Docky (at the time still merged with gnome-do) worked without a hitch. I ran into this error first when I installed 9.10 and decided to go back to 9.04, hoping that it would be fixed. I can't remember which version of the nVidia drivers I was using in Jaunty, but is there any way to go back to those drivers in Lucid?
With Ubuntu 10.10 I cannot get a proprietary driver to work with the nVidia NV18 GeFroce4MX video on my PC. I worked fine on 10.04 LTS. Numerous posts on Ubunutu forums, but none seem to work for my PC.Only thing that seems to work in part is to use xorg 1.9 driver. However, something is not right as mouse cursor has to be positioned about one line above where you would normally click to get things to work.
View 11 Replies View RelatedI was trying to update the new nvidia drivers since they dont seem to work in the newer kernel, or to try to fix it but now when i run yum update I get a screen like this:
Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.38.3-18.fc15.i686.PAE is needed by (installed) kmod-nvidia-2.6.38.3-18.fc15.i686.PAE-1:270.41.06-1.fc15.i686
[Code]...
I am trying to install nVidia drivers on CentOS 5.4 and it is requiring kernel-source
# lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
For the installation of kernel source, I have followed the steps on [URL]. I followed the steps under 2.1 and they worked for me. Now what can be done for the installation of the kernel-source package. When I am trying to install nVidia drivers, I am getting error, following are lines from installation log of Driver.
-> Tagging shared libraries with chcon -t textrel_shlib_t.
-> License accepted.
-> Installing NVIDIA driver version 185.18.31.
-> No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]? (Answer: Yes)
-> No matching precompiled kernel interface was found on the NVIDIA ftp site; this means that the installer will need to compile a kernel interface for your kernel.
-> Performing CC sanity check with CC="cc".
-> Performing CC version check with CC="cc".
ERROR: Unable to find the kernel source tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL]. I want to install driver.
# rpm -q kernel-
kernel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-devel
kernel-devel-2.6.18-92.el5
kernel-devel-2.6.18-164.15.1.el5.centos.plus
kernel-devel-2.6.18-194.3.1.el5
kernel-devel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-source
package kernel-source is not installed
The nVidia Driver I am installing is:
NVIDIA-Linux-x86-185.18.31-pkg1.run
# uname -a
Linux harvey 2.6.18-194.3.1.el5PAE #1 SMP Thu May 13 13:48:44 EDT 2010 i686 i686 i386 GNU/Linux
Only reason to install the proper driver is to use dual monitor.
i m trying to fix the nvidia drivers and stuff to let Desktop Effects work. I reboot after some changes, and at first I got a kernal error message, and the Fedora froze. So I restart,, and it freezes before I even get the error message. Pop in the live cd, booted up from it so I can talk to my fedora friend, and the reboot to try again. Works, still hasn't froze, and I could get the actual error info.
View 4 Replies View Relatedwhere to find ODBC drivers for CentOS 5.5 to work with Perl 5.x (preferrably free)?
View 2 Replies View Relatedanyone using HP Elitebook 6930P with CentOS5.4 and successfully installed sound drivers?
sound ( ON and MAX volume) but test sound etc does not work.
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
I installed Xubuntu the other night (completely wiped machine) and started doing all the updates on it. After a couple of reboots, I changed from the proprietary drivers, to the regular nVidia drivers. After doing this, the startup logo is displayed at a really low resolution. Is there a simple fix to change this and use the nVidia drivers as well?
View 1 Replies View RelatedI can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.
View 9 Replies View RelatedI had this card on Ubuntu 10.10 and Mint 10 and with the video card driver installed, all movies where playing like I had a video card with 1 MB. When I was using the os generic video card movies played more better than with the video card driver enabled, but with the generic driver I did not had any graphic effects.Will CentOS use proper the nvidia driver or not?The video card is made by Gigabyte but has the nvidia chipset.
View 1 Replies View RelatedI've tried to install nvidia drivers using this commands:
Quote:
yum install kmod-nvidia
yum install akmod-nvidia
yum install nvidia-xconfig
After rdblacklist=nouveau in grub it runs, but I am having several issues and therefore I would like to downgrade to nouveau or whatever I had running with basic fedora 12 installation.
My GPU is nvidia gtx 280:
Quote:
[root@localhost ~]# /sbin/lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 280] (rev a1)
My kernel is:
2.6.32.9-70.fc12.i686
I have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
View 5 Replies View Relatedwhen I boot into Fedora right before the login screen I get a black screen with a command line.How can I uninstall the drivers and get it work again without ATI Drivers? I have switchable graphics and for Fedora have to switch them in the BIOS but with integrated as well as discrete graphics I get the same black screen.I have the LiveDVD ready and only need advice on howto log in in text mode or recover via LiveDVD.
View 1 Replies View RelatedI wanted some input on chronic problems with Ubuntu:
1. Why does wireless almost never work right on Ubuntu?
2. Why, when Ubuntu just decides to turn off my wireless card, can I not just turn it back on?
3. Why do tar balls almost never unpack right?
4. Why are printer drivers so buggy?
5. Why do my MP3 players and digital cameras not work with Ubuntu?
I spent 3 hours last night trying to unpack a tar.bz2 file so I can run my Ralink network card. It worked fine until my son unplugged my computer. Now my card is disconnected and it will not reconnect. When I check forums no one has a simple answer for something as simple as turning a network card back on. On my Apple, it's simple: click my wireless icon and hit "on." tell me an easy way to just turn my wireless card back on, it would renew my faith a little in Linux.
i am planing to buy a new graphics card... I 've knew the problem of ati drivers...And i 've heard that ati made knew drives they fixed the problem?
View 10 Replies View RelatedI work at a computer shop. I have been making ubuntu live cds for a couple years to help test hardware outside of whatever viruses and other crap software people have installed in their os. Generally I use remastersys to create the image. However, it removes all 3d video drivers, for good reasons which I understand.
Does anyone know of a similar program or a way to include the proprietary drivers on a live cd?
If you happen to have any other suggestions for troubleshooting linux live cd's as well I would be happy to hear them. Likewise, I would be happy to share any knowledge I have accumulated. I like to think my live cd is a pretty solid compilation of hardware diagnostics and utilities.
I installed Debian 8 on my new computer 3 days ago. Everything went fine, until I tried to install the nvidia non free drivers version 352.21 (for a GTX 970M).I read a lot about that, figuring out I had to add the experimental repo. Here's my sources.list for reference :
Code: Select all# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie contrib main
# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie main contrib
deb http://ftp.fr.debian.org/debian/ jessie main non-free contrib
deb-src http://ftp.fr.debian.org/debian/ jessie main non-free contrib
[code]....
E: Unable to correct problems, you have held broken packages."but it is not going to be installed" ?I searched on various search engine for this issue with no revelant result..
I have nividea 8400 gs geforce gpu. i need some help about my graphic driver. what driver i need for mu gpu in fedora. i did not find any drivers for fedora linux, all drivers is for windows platform.
View 1 Replies View Relatedwhen i try to install the nvidia drivers with 'yum install kmod-nvidia' its worked before, but now i get this (look at the bottom for where it goes wrong)
[root@localhost Tom]# yum install kmod-nvidia
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
Setting up Install Process
Resolving Dependencies
[Code].....