CentOS 5 :: Installing Fuppes Media Server Onto CentOS
Jun 4, 2009
I've been trying to install the Fuppes media server onto CentOS and have had a few difficulties. I had to do a build from the source (svn build 578), then configure, make and make install. So far so good.Once I try to run fuppes, I get the error:[ERROR] Failed to bind socket to : 8.15.7.107:0.The documentation I've searched so far suggests that there is a config file that needs to be set with the appropriate ip address, but the file doesn't exist as the program hasn't started up yet!
View 1 Replies
ADVERTISEMENT
Apr 10, 2011
First step is installing and enabling the epel repository. (This is done here: [URL] Next step is to do the actual install " yum install media tomb" Next you have two choices to setup priorities with the repositories, or you can go to /etc/yum.repos.d/epel.conf edit using vim or your flavor of text editor find all instances in this repository of enabled=1 and set them to enabled=0
Or set up priorities in the repos. Next is to edit the config for mediatomb by going to /etc/mediatomb.conf ## Network interface on which the server will run, you need to edit this! MT_INTERFACE="NOTSET" and change the "NOTSET" to the interface you are going to use to. To start media tomb as sudo " service mediatomb start"
View 2 Replies
View Related
Dec 4, 2009
I am a start level person in linux with switching between linux and windows projects. I am trying to install vlc media player. But as observed through net, it requires rpmfusion first, it has some links about finding requisite tools and installing them.
1) First step: installing rpm fusion:
TRY1:
I went to "www.rpmfusion.org/configuration" and used the following command:
*********************************************
# su -c 'rpm -Uvh http://download1.rpmfusion.org/free/el/updates/testing/5/i386/rpmfusion-free-release-5-0.1.noarch.rpm http://download1.rpmfusion.org/nonfree/el/updates/testing/5/i386/rpmfusion-nonfree-release-5-0.1.noarch.rpm'
*********************************************
But I got the following result:
*********************************************
Retrieving http://download1.rpmfusion.org/free/el/updates/testing/5/i386/rpmfusion-free-release-5-0.1.noarch.rpm
error: skipping http://download1.rpmfusion.org/free/el/updates/testing/5/i386/rpmfusion-free-release-5-0.1.noarch.rpm - transfer failed - Unknown or unexpected error
[code].....
View 2 Replies
View Related
Apr 7, 2010
Since RHEL is similar to CentOS posting it here.
Upon booting from DVD, i get the below error: "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
I have IDE Sony DVD RW AW-G170.
BIOS Setting:
Downloaded the CentOS-5.4-i386-bin-DVD image from centos.org from DVD.torrent using bittorrent file.
When booting from the DVD, it gives me the boot prompt:
Upon pressing enter, the log messages of the boot detect the media drive as: hdc: Sony DVD RW AW-G170 IDE ATAPI CD.
The below steps occur:
1) Select the keyboard type: selected us
2) Select the Language : selected us
3) Select the image:
- Local CDROM
- Hard Drive
- NFS Image
...
...
selected Local CDROM
Then the above error "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
The booting steps does not ask the for media check step.
The below methods have been tried to solve the problem:
- Burnt the image in another 2 DVDs but the same error "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
- Upon burning the DVD image , selected the DVD read speed: 8x. Upon burning the DVD selected 18x for burning. and then tried to boot with that DVD
- At the boot prompt entered : linux hdc=cdrom replaced hdc=hdb but the error remains.
View 1 Replies
View Related
Jun 14, 2010
I'm using CentOS 5.5 as a media server to stream media content over my local network. Currently i'm having problem while installing last.fm scrobbler.
Here is a sample output:
yum localinstall xmms-scrobbler-0.4.0-7.fc11.i586.rpm
Loaded plugins: fastestmirror, priorities
Setting up Local Package Process
Examining xmms-scrobbler-0.4.0-7.fc11.i586.rpm: xmms-scrobbler-0.4.0-7.fc11.i586
Marking xmms-scrobbler-0.4.0-7.fc11.i586.rpm to be installed
Loading mirror speeds from cached hostfile .....
The program package-cleanup is found in the yum-utils package.
Upon searching my hard disk this is what i get:
find / -mount -name libcurl*
/usr/share/man/man3/libcurl-easy.3.gz
/usr/share/man/man3/libcurl-tutorial.3.gz
/usr/share/man/man3/libcurl-share.3.gz
/usr/share/man/man3/libcurl-errors.3.gz
/usr/share/man/man3/libcurl-multi.3.gz
/usr/share/man/man3/libcurl.3.gz
/usr/lib/libcurl.so.3
/usr/lib/libcurl.a
/usr/lib/libcurl.so.3.0.0
/usr/lib/pkgconfig/libcurl.pc
/usr/lib/libcurl.so
So it tells me that I need libcurl.so.4, but I couldn't find any suitable rpm binaries for it. The only rpm that i found was for Suse and Mandrake. How to set this up, so that i can get a fully functional media server.
View 5 Replies
View Related
Feb 15, 2009
The installer can't see my raid controller (I assume) as I'm getting the following error:"Error opening /dev/mapper/isw_jbhgjgjj_Vol0: No such device or address"It just sees them as 4 individual drives: sda, sdb, sdc and sdd.Please note that I have set up the RAID 5 in the controller bios interface and the image name is Vol0, which it seems that it tries to load but for some particular reason it can't.I have also tried different bios settings and nothing worked.
View 3 Replies
View Related
Jan 13, 2010
My problem is that I'm trying to install CentOS 5.4 x86_64 DVD ISO on Supermicro X7SBI server with installed Adaptec RAID 3405 controller.
I created RAID 5 array and is working fine (adaptec status says Optimal) but I can't install CentOS to that array (1.5TB size).
Whenever I try to install with: linux dd
I'm asked for a driver, which I have downloaded from Adaptec site and extracted contents to USB drive (in installation found as /sba1) which has now a lot of IMG and some ISO files on it.
I try to load (I simplified names) RHEL5.img, CENTOS.img... with x64 names (one exact name: aacraid driverdisk-CentOS-x86_64.img) and I always get the error message: "No devices of the appropriate type were found on this driver disk"
This is going on for a week now and I can't find the right driver or something I'm doing wrong to get install done.
View 16 Replies
View Related
Dec 9, 2009
I am trying to install CentOS-DS on version 5.4 x86_64. I cannot get to the Extras repo due to lack of wired Internet access. I have wireless (except to server) and I have big UFD drives.
View 1 Replies
View Related
May 7, 2009
I need your help urgently. I will shortly install Centos 5 on a HP DL380R05 E5420 Server with two HP 146GB 10k 2.5 SAS HP SP hard disks running hardware RAID-1. I am a newbie on CentOS, please advise me:
1. Do I need a Centos RAID device driver for hardware RAID-1 on the HP DL380R05 E5420 Server?
2. Should I use Centos i386 or Centos x86_64 in this case? Which one: CentOS 5.2 or CentOS 5.3?
3. Does Centos support Embedded NC373i Multifunction Gigabit network cards?
The following is my server's hardware configuration:
HP DL380R05 E5420 2GB Base AP Server(1) Quad-Core Intel Xeon Processor E5420 Two Embedded NC373i Multifunction Gigabit / 2 GB (2 x 1 GB) PC2-5300 Fully Buffered DIMMs (DDR2-667)/HP Smart Array P400/256MB Controller /Rack (2U)/Hot Plug Fully Redundant Fans Standard Two HP 146GB 10k 2.5 SAS HP SP HDD HP 1000W IEC C14 Cord RPS Kit
View 19 Replies
View Related
Jun 7, 2009
I want to install CentOS from netinstall CD, but it doesn't work for wireless connection, because it just looks up for eth0 connection. Well, I connected server to wired USB connection and it's named eth1. I want to use netinstall CD but using eth1 connection. Is there any way for doing it?
View 2 Replies
View Related
Nov 10, 2009
I am having new hardware and IDE driver for that hardware as drive disk image (it8213_centos53.img). CentOS 5.3 installation is working fine with drive disk image at USB and CentOS 5.3 at DVD. Our application uses CentOS 5.3 and we build a custom kick-start ISO for installations. Using that ISO client is going to install on all hardware boxes.
Note while installing :
a) No network connection is avalible.
b) No USB isavalible.
c) No floppy is avalible.
d) Only single CD-ROM is avalible.
So, is it possible to build single custom kick-start CentOS 5.3 ISO which contains dirve disk image and entire installation will be done using that image. If so please let me know the steps to build it.
View 2 Replies
View Related
Sep 23, 2011
Error installing mod_ssl on centos 5.7. Do not install the mod_ssl module says there is a package conflict, some way to fix it?. is a 64-bit
[Code]...
View 5 Replies
View Related
Dec 9, 2010
i have a server with four hard disk and RAID5 config , i want to install Centos5.5 on this server . while installing it asks me following :
1-use free space
2-remove all linux partition & create default
3-remove all patition and create default
i just wont to know which option i should choose.
View 2 Replies
View Related
Apr 12, 2009
I intend to setup a Linux Virtual Server cluster behind a firewall. I have two machines which will run Centos 5.3 and act as the routers. I have two other boxes for now, also running Centos 5.3 which will run the server applications. All these machines are connect on my local network behind a firewall. I will ask for the two LVS router machines to be granted access through the firewall for web access (port 80) and ssh access (port 22). These two ports should be sufficient for me to receive my web application requests, as I will use NAT translation on the LVS machines to redirect to the applications on the real servers.
I've read the documentation for the LVS but I would be grateful if someone could give me some guidance on the whether I will have any problem with the firewall and the LVS routers machines, as I have described it above. Do I need to ask for anything other than access through the firewall for these two machines. They will get DHCP IP's I guess. Also, its not quite clear to me where the LVS router machines LAN cards get connected. Do all of the NIC cards connect to my local network, or do I need an independent hub to connect the second NIC of the LVS router machines, and as such use static IP address for them on this private network.
View 2 Replies
View Related
Nov 18, 2009
I've Got one Problem with My Computer soon after success installation of when the boot-loader ask me to choose OS at CENTOS 5.4, multi boot boot-loader if i choose windows then computer tries to boot windows but fail and give the error message that there is a problem on reading the hard disk, But when i restart it and start with LINUX then computer start successful with no error message, now i do not know what to do cause i need to use Windows and all my programs are in windows..
View 1 Replies
View Related
Oct 24, 2010
I'm trying to install CentOS 5.5 on an old Pentium 4 desktop PC I have, which is not being used for much other than being a MTA, and I want to migrate this functionality onto the CentOS platform for stability (Windows is a perpetual nightmare. I partitioned a spare 20GB to experiment with, and I want to install CentOS into here to play around with first so I can move my files around between Windows and CentOS, until I'm happy all of the stuff is gone, then I can scrub the Windows partition and claim the space for CentOS.
So, I've downloaded and burned the DVD and tried to install. I start the install with no args from the main install menu, and the process goes through some probing and then comes up with the "Welcome to CentOS" menu. I go through this, and then it tries to start X Server. It fails, and falls back to text mode. I get the "Welcome to CentOS" screen again, and then proceed through it. I set my keyboard layout to UK, then this message comes up at the bottom of the screen:
"_X11TransSocketINETConnect() can't get address for localhost:6001: Temporary failure in name resolution"
then on the next line: "Cannot open display :1" If I force the install to text, by typing "linux text" at the first menu, I get about the same way through, but the install just hangs doing nothing, and no disc access to the install disc.
View 19 Replies
View Related
Aug 31, 2010
I have purchased an IBM x336 server. The IBM website says that the server supports Linux. After doing some research, I decided to install CentOS 5.5 on this server. The goal is to use it as a internal web server for testing. My problem lies with the installation process, for some reason Linux does not see my hard drives. The server is equipped with two 36GB hot-swappable SCSI drives. When I get to the screen to choose where to install Linux, it only gives me options to install over a network, which I cannot do, because no hard drives are shown in the list. I have looked through the BIOS but I do not see any settings that would prevent the hard drives from showing. I have been able to boot to CentOS 5.5 using a LiveCD, but even then I still cannot access my hot-swappable SCSI drives.
View 4 Replies
View Related
Mar 1, 2009
how to work with linux (centos 5.2 64bit) but i am having a hard time to get this screen install. I was going to try this but i was not sure as i have reinstall the os many times because i do something wrong.
apt-get install screen
View 1 Replies
View Related
Nov 4, 2009
I have a remote CentOS server (5.4 Final) to which I need to add remote access to a GUI front end. I have SSH access to this box (no physical access, I rent it and it is housed in a DC) and I think I have managed to install Gnome correctly:
[root@box ~]# yum grouplist
[snip]
Installed Groups:
[snip]
[Code]....
View 3 Replies
View Related
Mar 2, 2010
I am in trouble on installing CentOs 5.4 to my old server ml370 G3. My Boss brought me a old server ML 370 G3 to install linux OS The server has only one scsi disk I downloaded CentOS 5.4 And I tried to install but Server hangs when it comes to load cciss driver I googled but i failed to find a soltuion to get over. I think it must be smartArray controller problem. i tried to make Driver Diskette for HP ProLiant Smart Array Controller but i don't have any desktop machine which have a flopy driver :( I don't know what i can do any more. is it possible to load dirver from cd media? If So , how to make driver CD Or way to install without driver diskette. It's my first time to install linux OS into server machine . I usally installed my desktop there was no problem to install to desktop machine
View 1 Replies
View Related
Aug 19, 2010
i installed squid 2.6 proxy server on centos 5.4,squid performs services very nice but after reboot the system.it shows a just black screen written with " GRUB_ " and held the boot process,tell me what should i do ?
View 1 Replies
View Related
Apr 27, 2011
I've done the following:
But when I connect via, VNC I get a minimalist screen and console.
I ran "startx" and got this:
I need to get a real desktop environment running on this box.
Centos 5.5.
View 3 Replies
View Related
Apr 19, 2010
installing `yum` in my VPS Centos 5.3 (Final release) I need `yum` because I want to install Japanese fonts in my sever. What is the command for installing Japanese fonts in my VPS Centos 5.3 server
View 2 Replies
View Related
Mar 6, 2009
how to install freeradius with dialup admin support on CentOS 5. .
View 1 Replies
View Related
Sep 15, 2009
I have a VPS server installed with centos 5.3. The server has directadmin. Probably that when directadmin was installed, the httpd server of choice was apache 2.2.13.
My problem is that i whant to install mod_dav_svn trough yum but without updating the latest version of apache form yum repository. If i exclude the httpd package when doing yum install mod_dav mod_dav_svn i get a dependency error witch say that i nedd httpd-mmn installed. So, my question is, how can i use yum to install mod_dav_svn without updating the httpd.
View 3 Replies
View Related
Sep 1, 2010
My host is blocking port 3960 which I need to use for an SVN server, they are telling me that I will have to install my own firewall. I've not done this before and am not sure of what to do or whether anything I can install will be enough protection.
View 2 Replies
View Related
Dec 28, 2009
I've noticed this happen with every CentOS installation I've done in the past and it's confusing me. On the software template screen select, I always select "Server" and leave the extras option unchecked, I also check "Customise now". The only things I choose are the editors (to get vi), Web server and server configuration tools (and this time also Java). I didn't select any GUI programs, yet it still installs things like X, GNOME components and also samba. Why does it do that? There no way they're needed for dependencies. Is there something I'm missing when selecting the software components? Why does it still install samba when I didn't select it from under "Servers" components? Or have I misunderstood what software selection does and it installs all those components regardless but doesn't automatically turn the services on?
View 5 Replies
View Related
Feb 23, 2011
I am very new to this site. Is there a good tutorial on installing CentOS X86_64 on VMware Server Console?
View 2 Replies
View Related
Jan 16, 2011
I'm trying to install RubyOnRails, I'm at the point of installing the gem modules mongrel, mysql and passenger Running gem install mongrel Returns
Code:
Building native extensions. This could take a while...
ERROR: Error installing mongrel:
ERROR: Failed to build gem native extension.
/usr/local/bin/ruby extconf.rb
[Code]....
View 6 Replies
View Related
Jun 1, 2009
I have a problem with compiling of mod_ruby-1.3.0 After a succesfull configure i get a error in the make, it say "make: *** [apachelib.o] error 1" . Here below you can find the results of de configuring and the make.I was following the roles in Howtoforge " The perfect server - Centos 5.3" everything goes perfect till mod_ruby-1.3.0
./configure.rb --with-apr-includes=/usr/include/apr-1
checking for a BSD compatible install... /usr/bin/install -c
checking whether we are using gcc... yes
[code]....
View 7 Replies
View Related
