My host is blocking port 3960 which I need to use for an SVN server, they are telling me that I will have to install my own firewall. I've not done this before and am not sure of what to do or whether anything I can install will be enough protection.
View 2 RepliesIf I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies View RelatedI have setup sshd_config for port 3210! I have difficult setup the iptables firewall to allow ssh on port 3210! i always enter this:
iptables -A INPUT -p tcp --dport 3210 -j ACCEPT
iptables -A OUTPUT -p tcp --sport 3210 -j ACCEPT
but after i restart ssh, the system do not allow port 3210... why? do i forget something?
I have a computer which has a public IP.My ISP has allowed only port 22 for my machine to be accessed outside from internet.I want rest of my computers which are connected to this machine be accessible via SSH on internet.I can configure IPTABLES to route different ports to internal machines but since ISP has given only one port for the gateway how can I go for it any guesses. I came across some thing reverse SSH tunneling but that has to keep the connection alive all the time at gateway I want my trusted people to be directly able to access the machines on LAN to which they have account to login in this scenario.
View 3 Replies View Relatedtell me the command for iptable rule to add in Chain RH-Firewall-1 to block ftp port & the ftp server was configured in public ip address,i searched in google but i did'nt get the exact command for iptables rule in Chain RH-Firewall-1.
View 3 Replies View RelatedI'm using CentOS 5.3, and I want to allow my samba server from selinux. I disabled my selinux and it works fine, but I want to keep my seline firewall on and want to allow other workstation to access my samba server.
View 8 Replies View Relatedi am not able to port 8080 on my CentOS VPS server.I have followed all the instuctions as mentioned on iptables wiki page.Also I am able to telnet my ip address and port number, But can not access from browser.
View 6 Replies View Relatedi have to deal with reverse proxy issue and want to access few LAN devices having port 5900 and 9999, what exact steps i have to follow to allow this port in fedora firewall.
View 3 Replies View RelatedI have a problem sending of file attachment using Instant Messengeri have a firewall using firestarter, if i used outside firewall they can able to recieve my file in instant meesenger but if i used firestarter it always cancelled my sending of file attachment....
View 3 Replies View RelatedI want to open port 2700 on my firewall but I don't know how I try with Code:iptables -A INPUT -i eth0 -p tcp --sport 2700 -m state --state ESTABLISHED -j ACCEPT But the port is not open I see the firewall configuration with the command setup . I use CentOS 5.3 here a screen of my configuration :http://upbg.net/out.php/i3537_sshot3.pngCurrently my firewall is off because I don't know how to turn on 2700 when the port is open I will turn on firewall .If I write 2700 in other ports field will 2700 be open ? Before 1 month I try but the port was not open . I have only 1 last question will firewall reduce the load of the my server now mysql use many CPU % and I just don't know why
View 14 Replies View RelatedI want to change my ssh port from the default 22 to something else. I did the following: vi /etc/ssh/sshd_config; uncommented Port 22 and changed it to the desired port number. After that I run service sshd restart for the change to take an effect. Now, when I want to login into the new port I receive this message - Network error:Unable to route to host. When I change the port back to 22, I will be able to login again.
View 6 Replies View RelatedI want to open the port 18680 on my remote Fedora 14 machine. I didsudo iptables -I INPUT -p tcp --dport 18680 -m state --state NEW,ESTABLISHED -j ACCEPTsudo iptables -I OUTPUT -p tcp --sport 18680 -m state --state ESTABLISHED -j ACCEPTsudo service iptables saveThe status returned is OK.I have also opened the port on my security group on Amazon. Also, I rebooted the machine.When I use the browser to view the application running at port 18680 the browser cannot connect.
View 1 Replies View Relatednmap is showing a port as closed. I have the firewall stopped on both hosts.It shows as closed on localhost as well.The process that's listening to that port is not started from xinetd so i doubt hosts.allow/deny is the issue.I can't help but feel that I'm forgetting some other access control mechanism.Both hosts are RHEl5.4
View 3 Replies View RelatedI just installed Mandriva 2010 and set up the interactive firewall via the MLCC. I set it up not to allow any services to connect (didn't check any boxes). However, when I check my system using a port scanner (shields up at www.grc.com) it says that port 23 is open. Does anyone know why this would be and how I can close it When I look at the daemons running I notice that iptables and ip6tables are 'stopped' although shorewall is running - is this correct? I (perhaps wrongly) thought that iptables needed to be running in order for the firewall to work properly.
View 2 Replies View RelatedJst to tryout ufw I tried to close port 80 on my pc. I'm using Ubunutu 9.04. I sudo ufw enable sudo ufw deny 80. But nmap localhost shows port 80 open why? How can I close it? I will need to control some ports on my next server.
View 2 Replies View Relatedcurrently i want to configure sendmail port number 25 im using these port numberalready how can i chage my senmdail port no.
View 2 Replies View RelatedI have written simple application in cpp which listens on port 8080. But when I start the application and check the port it is listening on (using netstat -nap), I can see that the application is listening on port which is > 30000.
This port number keeps on changing if I re-run the application.Please let us know if I have to do any kind of a seeting so that application starts listening on 8080 port.I am using CentOS 5.5 (I tried same on CentOs 5.2)
I have a CentOS server running at [a link which has been moderator deleted] (a text-based game I'm building) which is displaying the default welcome page. I'll quote some of the things that page says:
Quote: "Apache 2 Test Page powered by CentOS This page is used to test the proper operation of the Apache HTTP server after it has been installed. If you can read this page it means that the Apache HTTP server installed at this site is working properly."
"If you are the website administrator: You may now add content to the directory /var/www/html/. Note that until you do so, people visiting your website will see this page and not your content. To prevent this page from ever being used, follow the instructions in the file /etc/httpd/conf.d/welcome.conf. You are free to use the images below on Apache and CentOS Linux powered HTTP servers.
I have a mail server i need it to send message via port 587 not port 25, i make some changes to my postfix server which i use and it is already successed making a telnet to 587 port like it :
[Code]....
I have properly configured my router to open a port for Transmission and Vuze. The OpenSuSE firewall settings are somewhat confusing, however. How do I add a port specifically for the BT protocol? I know it's the firewall causing issues, because when I shut it down, my BT apps roar to life, and die with a whimper when I turn it back on. In Ubuntu, opening a port in the router is automatically configured in the firewall; that is apparently not the case with this distro.
So, when I go to Yast Firewall, I see "allowed services" under the tabs available. When I hit that tab, I see a dropdown menu that contains services such as NetBios Server and Samba Server. Am I choosing one of those available and adding a port to it? Am I adding a custom service via the Advanced settings, and if so, why isn't there a way to label the service so that it shows up under allowed services?
I used to have Opensuse 11.0 and Vuze 4.0.2 and both were working great. Recently I upgraded to OpenSuse 11.3 and installed Vuze 4.5.10. I did not change any configuration in the ADSL router but now I could not get the smiley icon to go green. I followed all the steps given here: A Quick Bittorrent Guide (with screenshots). It doesn't work. so I modified FW_ROUTE and FW_MASQUERADE to yes in /etc/sysconfig/SuSefirewall2. That also does not work. What did I miss here? My ADSL router is DSL-2640T.
View 3 Replies View RelatedIs there a firewall I can install that will only let certain MAC addresses through on a certain port?
View 2 Replies View RelatedI can't port forward to ftp behind my firewall, I tried several attempts but none worked.
Can anyone help me solve this?
I am trying to make a vnc connection from pc #2 to pc #1. Pc #1 is a debian pc behind a zyxel router (P-2602HW-D1A). Pc #2 is a windows xp pc another place at the internet.I have configured the zyxel router to forward incomming trafic on port 5902 to the local ip-adress of the debian box. The debian box is running a vnc server, listening on port 5902.But i dosn?t work.I have tryed to scan the zyxel routers ipadress on port 5902 from the internet, but the scanner says that the port is closed.The vnc server on pc #1 is working fine on the local network. I can connect to the server from a pc on the same side of the zyxel router.Is it deffenitly a router problem, or could it have something to do with debians own firewall?
View 2 Replies View Relatedi need to change ssh port on the servers including centos and ubuntu when i make changes to /etc/ssh/sshd.config and change the port to something else restart sshd then i can determine that port 22 is not working but ssh does not connect to new port it says "no route to the host"
View 9 Replies View RelatedI want to change my MySQL default port(3306) as 80 how can i do this on centOS 5.2? I tired to add
[client]
port=80
to /etc/my.cnf and different command in this file. But mysql didn't start. How can do this? I'll use server only as mysql and ftp server.
I have a fresh installation of CentOS 5 I'm using for a server, and I'm having issues with port configuration. I have iptables running, and it started with no /etc/sysconfig/iptables file. I added a few basic rules (port 53, port 10000 for webmin), saved the file, and restarted the service. I tried connecting to webmin, scanned ports, and traffic was blocked. I set iptables to allow all traffic and restarted the service, and it still showed basically every port as being blocked. It seems port 80 and port 22 work for some reason, even when I tell iptables to block all ports.
I'm not sure what's going on here. Iptables is reading the /etc/sysconfig/iptables file, and if I use lynx localhost:someport it responds as it should according to the file. However, if I try connecting by IP, it's like there's some other firewall or something running that does whatever it's configured to do.....
A lot of activity is happening on our local server and I want to know which port is getting the most used and which daemon is using the port. I think it will be some modification of netstat command.
View 1 Replies View Relatedis possible to configure NTP server to transmit time with COM (RS232) port ????
View 1 Replies View RelatedI've been trying to install the Fuppes media server onto CentOS and have had a few difficulties. I had to do a build from the source (svn build 578), then configure, make and make install. So far so good.Once I try to run fuppes, I get the error:[ERROR] Failed to bind socket to : 8.15.7.107:0.The documentation I've searched so far suggests that there is a config file that needs to be set with the appropriate ip address, but the file doesn't exist as the program hasn't started up yet!
View 1 Replies View Related