CentOS 5 Hardware :: TV Card To Use With 5.4
Jan 21, 2010
I would like to add a PCI TV card to my CentOS box. My internet provider has given me a TV box (TV over ADSL) and even though I don't have / need a "real" TV set I would still like to be able watch TV on my desktop PC.
Could you recommend any cards/chipsets working well in CentOS? The card should have a tuner (one will do, there will be only one source, not a "real" antenna), and video/audio coming from the TV box (output from it has a SCART connector, but I can get an adapter for converting that into pretty much any other video output). Ideally it would have a DVB-T tuner as well as analog, but that's not strictly necessary since the TV is received by the ADSL box. I am thinking about Hauppage WinTV HDR-1100 [url] has anybody made that card work in CentOS?
On another note, there seem to be quite a few USB-stick like TV cards. Would that work in CentOS? I imagine that there isn't a great deal of hardware inside of these, and I don't want to upgrade the CPU because the machine needs to use a SW decoder.
View 1 Replies
ADVERTISEMENT
Mar 30, 2009
very much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies
View Related
Jun 15, 2010
If i run lspci it shows lan card model, but lan card is not working. How do i check my lan card driver is installed or not?
Is there any way to list all installed drivers with hardware information like we have device manager in windows.
View 4 Replies
View Related
May 1, 2009
I just have CentOS installed and cannot get the Agere et131x network card to work.I have tried the following:Reboot the computer and still did not see the network hardware.
Fai
lspci
Quote:
[code]....
View 7 Replies
View Related
Sep 13, 2010
I've installed from the CD the Centos version 5.5. When I try to connect to Internet I can't because I received some errors. I've the Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller also a wireless slot (I've the wireless card DWL-G650+) When I turn on the pc and I go to "Ethernet Device", I see set: peth0 (Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) ETHERNET CONTROLLER) and also set "Bind to MAC address": fe:ff:ff:ff:ff:ff I've set manually the IP address (I'm under router). Status is "Active" but can't go on the Net. When I change to "eth0 (Intel EtherExpress/100 driver)...sometimes become "Active" an other times said that the MAC address is different or to check the cable because can't find the IP. What can I do?
View 5 Replies
View Related
May 4, 2009
I am using asus p5ld2-x/1333 motherboard,I installed the centos ,Centos saw other drivers but didn't see ethernet card.I am not connection the internet.
View 2 Replies
View Related
Aug 25, 2010
I just upgraded from Ubuntu 9.04 64-bit, to CentOS 5.5 64-bit and my RT-73 USB network card doesn't seem to want to function. It always worked fine in Ubuntu by default (plug and play). Is there some setting I need to make to get this working?Even BT-3 (which is quite old) recognizes the RT-73.
View 19 Replies
View Related
Jul 4, 2010
i like to use my DVB-C Card KNC-One on Centos 5.5 x86_64. But i cant get it to work. on a 32 Bit Centos this is working like a charm. I tryed several different kernels together with the video4linux-kmdl
At the moment i am using this kernel: 2.6.18-194.3.1.el5.centos.plus
[Code]....
View 8 Replies
View Related
Apr 13, 2009
I installed CentOS 5.3 on my Shuttle SS-31T with SiS 190 network adapter. While booting the message "Bringing up eth 0 [ OK ]" appears. After booting it isn't possible to surf to an internet location (p.a. www.google.com). It's also impossible to ping other machines in the network. After typing ifconfig everything seems to be ok.
ipv6 is turned off
IP : 192.168.0.3
Subnet : 255.255.255.0
Gateway : 192.168.0.1
View 9 Replies
View Related
Nov 20, 2010
I have a Centos 5 server on my LAN for testing the websites that i develop.It worked perfectly until this morning , after cold start -up, it seems that my network card is not enabled . Everything works normal:gui and terminal but no internet access. I'll run some commands on my Linux box and write the results , by hand , to this forum .
* uname -r : Linux Server 2.6.18-194.26.1.el5 i686 i386
* ifconfig eht0 : eth0 : error fetching interface information
* ifconfig -a : I get only results for loopback (lo)
* less /etc/modprobe.conf : alias eth0 sis900
* lspci |grep -i eth : 00:04.0 Ethernet controller :Silicon Integrated Systems [SiS] sis900 PCI Fast Ethernet (rev 90)
[Code]...
View 1 Replies
View Related
Mar 18, 2010
I have centos 5.4 with kernel 2.6.18-164.el5, i want know what card for 100mbit or better connection is good solution, some hints for network card? What do u think about this cards?Intel Gigabit CT Desktop bulk - EXPI9301CTBLK or something different for game server?
View 3 Replies
View Related
May 9, 2010
I'm using the latest Centos on an older IBM server which only has USB1.1 ports, it works great and is very reliable. I would really like to add a USB2.0 card to the system. Can anyone recommend a reliable PCI card which will work with Centos, preferably one which does not require any special drivers to be loaded.
View 1 Replies
View Related
Dec 18, 2010
I have loded centos 5 on vertual machine, my host machine is windows xp and has two NIC cards working perfectly well
1) realtek RTL 8139 family PCI fast eathernet NIC
2) realtek 8169/8110 family gigabite ethernet NIC ( ONBOARD)
but both of them are not getting detected by CENTOS
View 1 Replies
View Related
Feb 12, 2011
I have a dvr card that is a Softlogic 6x10 line of MPEG-4 codec card that uses mpeg 4. This is the driver that they recommend that I use but it is for ubuntu. Is there a Centos 5.5 equivalent? [URL]. This is the card: [URL].
This is what appears in lspci:
PHP Code:
03:06.0 Multimedia video controller: Unknown device 9413:6010
I found this on the net: [URL] and installed
PHP Code:
kmod-video4linux-PAE-0.0-7.20100410.2.el5.elrepo.i686.rpmkernel-ml-PAE-2.6.37-0.3.el5.elrepo.i686.rpm
I get this error when I run a modprobe budget_av:
PHP Code:
modprobe budget_avWARNING: Error inserting videobuf_dma_sg
(/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/videobuf-dma-sg.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting v4l1_compat (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/v4l1-compat.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting videodev (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/videodev.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting saa7146_vv (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/saa7146_vv.ko):
Unknown symbol in module, or unknown parameter (see dmesg)FATAL:
Error inserting budget_av (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/budget-av.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
View 5 Replies
View Related
Feb 13, 2009
Can anyone please tell me the files that a network card needs to use - know it needs a file called ifcfg-eth0 in etc/sysconfig/network-scripts
What other files has information relating to eth0
View 1 Replies
View Related
May 19, 2009
i did configure as it was advised on [URL]... but it didn't work. for eg I added eth0:1 and eth0:2 on /etc/sysconfig/network-scripts/ when i do ifconfig i can see only eth0:1, i cannot see eth0:2, eventhough i configured as it was on the tutorial
View 4 Replies
View Related
Jun 5, 2009
i have installed centos 5.1 but it won't recognize 2nd nic card (eth1). i was unable to install the driver supplied by the cd. i am using intellinet gigabite pci network card. the network card recognize by centos 5.3 but i need to use centos 5.1. i also tried another intel gigabite adopter but it also won't recognize by centos 5.1.
View 2 Replies
View Related
Jul 31, 2009
so i have motherboard with a integrate graphic card and, i want to to install a new graphic card ( geforce 6200A)when i boot my PC on new graphic card , i have a panic kernel and when i remove the new graphic card and boot with the old card => it works can i configure centos for the new graphic ? and where , what's folder ?
configution : centos 5.3
View 4 Replies
View Related
Nov 16, 2009
I'm install CentoS 5.3 but I've not a GUI... when I swith , screen is black... maybe problem in Video Card... I'm download this driver, but I don't know how to install ... Driver is NVIDIA-Linux-x86-190.42-pkg1.run - how CentoS 5.3 work in 256 mb card...
View 1 Replies
View Related
Dec 11, 2009
I need to change my lan card orderI have 3 lan cards eth0, eth1, eth2and I need my current eth2 as my primary lan card
View 4 Replies
View Related
Feb 9, 2010
I am attempting to install centos5 x86_64 on to an HP Compaq 6820s laptop.It appears the installation has gone ok but I have a big problem in that the centos installation knows nothing about the hardware on the laptop. i.e. it does not recognise the eth0 ethernet card.this means that I have no way of assigning an IP address to the laptop which means that it cannot join the network or the internet.how do you go about getting the correct drivers for the hardware that you are using?
View 11 Replies
View Related
Jul 28, 2010
I will install CentOS as Fileserver and XEN as Dom0 on a 4GB SD Card. The SD Cart is in a SD to IDE adapter(?). All other files (for example the Xen hosts) come on my 6TB Raid. I need only the basic system, samba an xen on the SD Card. How can i do this? Whats is the best partition table? How can i mount the Raid first on start up(for access the needet files to start Centos and services)?
View 1 Replies
View Related
Dec 25, 2010
Looking for some of the known compatible graphics card with Centos? A list of 20 - 30 cards would be nice. Ofcourse i'll need them to be new enough to find easily in any store.
View 6 Replies
View Related
May 4, 2011
I have an old PCMCIA card and I would like to use in a newly installed centos5.6. I want to use, but I do not know how. ifconfig-a does not return the card details. I can see the pci devices both the controller and the PCMCIA card as well. I read, I have to load the kernel module yenta to use the pcimcia card, but I couldn't. The /sbin/modprobe -l | grep "yenta" does not return anything, and do not have either of these modules in library
(find /lib/modules/`uname -r`/kernel/ | grep yenta)
How I can move forward welcome, or where should I start to search or indeed whether the card can support? How to config PCMCIA Card at CentOS5 now?
# lspci -vvv
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
Subsystem: Dell Device 0233
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- ...
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8039 (rev 10)
Subsystem: Surecom Technology Device 0428
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- ...
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
# lspci -nn
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. Device [10ec:8039] (rev 10)
# yum list | grep pcmciautils
pcmciautils.x86_64 014-5 installed
# uname -a
Linux localhost.localdomain 2.6.18-238.el5 #1 SMP Thu Jan 13 15:51:15 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
View 2 Replies
View Related
Aug 16, 2011
I have a ESXi 4.1 build 433742 server with a CentOS 5.4 virtual machine.I installed VMware Tools.I added a vmxnet3 network card on virtual machine for 10GbpsBut my problem, the card doesn't UP ! the resultat of my commands :
[root@centos1 ~]# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
[code]....
View 1 Replies
View Related
Feb 11, 2010
I am looking for a gigabit network card for my centos 5.4 server. I am looking for something known to work well with linux. I have been on the bestbuy site and I found a DLink (DGE-530T) card with support for linux from the vendor but after reading feedback from users with that card I am not so sure it is linux friendly. I am now thinking of buying online.
View 2 Replies
View Related
Feb 9, 2009
I have a problem to configure my wifi card, a dwa-110 from D-Link, it is not recognized when I launch System / network device control (only ethernet connections appear), and it is the same thing in Administration / network / network configuration. But if I launch administration / hardware / system devices, the last line is "Ralink 802.11 bg WLAN"... When I try to add in the window "network configuration" (from above) some new stuff, I specifying the kind of hardware (wireless) and when I have to enter the name of the card I don't see my card. On other OSes, I used ndiswrapper, but I wasn't able to install it on CentOS (dependencies required and it's hard with only a USB key to install the stuff...) How to see if the card is recognized, if I have to use ndiswrapper and so on. I have an internal PCI network card also, maybe it is this card which is recognized.
View 2 Replies
View Related
Apr 28, 2009
I have a desktop PC with CentOS 5 installed, and a wireless card that's working well via NetworkManager.
How would I configure the wireless card statically, e. g. by editing /etc/sysconfig/network-scripts/ifcfg-wlan0?
This would be something like :
DEVICE=wlan0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.1.252
NETMASK=255.255.255.0
ESSID=my_essid
CHANNEL=3
But I don't know how to define the WEP key here.
View 2 Replies
View Related
May 15, 2009
My digital card stop Centos 5.2 from start , when i remove it feom my compyetr it start , how i can install it ans stop centos from recognize it (ignore it ) i have winxp for it
View 1 Replies
View Related
May 16, 2009
I have a Linux box with a Biostar TA690G Mobo and a Nvidia 9600GSO graphics card. Everything was working fine until I tried to boost the RAM from 2 to 4 Gb. With the 4b RAM the Nvidia card stopped working. There is only a blank screen. If I remove the additional 2Gb everything goes back to normal.
View 5 Replies
View Related
