I will install CentOS as Fileserver and XEN as Dom0 on a 4GB SD Card. The SD Cart is in a SD to IDE adapter(?). All other files (for example the Xen hosts) come on my 6TB Raid. I need only the basic system, samba an xen on the SD Card. How can i do this? Whats is the best partition table? How can i mount the Raid first on start up(for access the needet files to start Centos and services)?
View 1 RepliesI have a dvr card that is a Softlogic 6x10 line of MPEG-4 codec card that uses mpeg 4. This is the driver that they recommend that I use but it is for ubuntu. Is there a Centos 5.5 equivalent? [URL]. This is the card: [URL].
This is what appears in lspci:
PHP Code:
03:06.0 Multimedia video controller: Unknown device 9413:6010
I found this on the net: [URL] and installed
PHP Code:
kmod-video4linux-PAE-0.0-7.20100410.2.el5.elrepo.i686.rpmkernel-ml-PAE-2.6.37-0.3.el5.elrepo.i686.rpm
I get this error when I run a modprobe budget_av:
PHP Code:
modprobe budget_avWARNING: Error inserting videobuf_dma_sg
(/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/videobuf-dma-sg.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting v4l1_compat (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/v4l1-compat.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting videodev (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/videodev.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting saa7146_vv (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/saa7146_vv.ko):
Unknown symbol in module, or unknown parameter (see dmesg)FATAL:
Error inserting budget_av (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/budget-av.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
I am looking for a gigabit network card for my centos 5.4 server. I am looking for something known to work well with linux. I have been on the bestbuy site and I found a DLink (DGE-530T) card with support for linux from the vendor but after reading feedback from users with that card I am not so sure it is linux friendly. I am now thinking of buying online.
View 2 Replies View RelatedI need to use the PCI slot to deliver SVGA video for testing purposes. I am assembling 20 units for a test station. All the PCI video cards I have tried leave artifacts (isolated pixel clusters of different colors or vertical lines), and cannot be set to SVGA (1024 x 768) resolution. PCI card that I can still purchase that will provide clean video? Are there video settings I am missing that need to be changed?Is there a primer on video cards with CentOS 5.4 available for the uninitiated?
View 1 Replies View RelatedI'm setting up my laptop with Lubuntu LTS (10.10 causes trouble on this machine). I have an SIIG CompactFlash card adapter for the PC-Card bay, which is handy for saving files now and then. The usual story: it works great in Windows but *buntu doesn't recognize it--whether it's in the drive on bootup or whether I insert it later. It just never shows in Thunar or PCManFM (it has a 1GB CF card inserted). Is there something I should be doing that I haven't been? lspci (with the CF adapter inserted prior to bootup) gives me:
Code:
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:05.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
[code]...
I have a CentOS box set up as a small home server right now. It is running a Apache Server. A SVN server and is going be a file server for all my friends. The problem is that it I need to add more SATA ports. RAID is not a big deal to me so the card can be a simple add in card. I am limited to PCI because the board does not have any pci expres slots. I am also interested in what hard drives that card would work with. I am hoping to keep them to 500 Gigs min. The motherboard has two built in SATA prots but I don't use them have had bad luck with them in the past
System:
AMD Athlon 64 3400+ cpu
MSI K8N Neo Series motherboard
3 IDE Hard Drives
1 CD Drive
CentOS 5
so i have motherboard with a integrate graphic card and, i want to to install a new graphic card ( geforce 6200A)when i boot my PC on new graphic card , i have a panic kernel and when i remove the new graphic card and boot with the old card => it works can i configure centos for the new graphic ? and where , what's folder ?
configution : centos 5.3
I want to use my CentOS-Server for logging incoming phone calls using an AVM Fritz-Card.It should also be possible to notify clients (Linux and Windows) on incoming calls, or there should at least be a web-frontend.Is there any software like that in the CentOS-Repository available?Or is there another software like that, that is easy to install? I already asked google (an i will go on), but I couldn't exactly find what I want.
View 1 Replies View RelatedAnybody know how to get pictures off of one? I've got a computer with XP, but the software doesn't want to work. I've tried setting it up in a VM, but VirtualBox won't patch the camera through for some reason. The SD card adapter it came with stopped working, so that's a no-go.
View 2 Replies View RelatedI'm trying to use an adapter for a SDmicro to a normal SD card on my laptop. I get a notification tath something has been plugged in, but it doesn't appear to be recognized. It doesn't show in Nautilus or Gparted. The light next to the SD card reader blinks when the card is inserted instead of being solid. If left in the computer for a few minutes, the light eventually turns off.
I tried booting up Windows on the same computer to see if it recognized it. It told me I needed to format it, but when trying it said that it was write protected. I'm really not sure what to do here,
recently I stumbled upon the fact you can buy a Sony Ps2 to Ps3 memory adapter which is a USB device that plugs into your PS3. However what I was wanting to know is there a way to mount the PS2 Memory card under Ubuntu via the USB device. Do I need to install a PC/SC card driver as its flash memory or do I need to use CCID?? Is it usbmount or pmount? I am a little clueless how you would get Ubuntu to read & access a PS2 Flash Card. The memory cards are manufactured by MagicGate and they bear this legend on the back; This device complies with part 15 of the FCC rules & regs and the Canadian ICES-003 operation is covered by the following conditions,
1> This device may not cause harmful interference.
2> This device must accept any interference received. Including interference that may cause undesired operation.
The way I look at it is as follows, if these memory cards are now defunct and no longer supported by Sony as such an 8mb memory card makes for a cheap storage method. Especially when people are throwing them away! The Venom adapter's are available on eBay. Let the hilarity ensue, mail your friend's some files on a 8-MB Ps2 Memory Card, then laugh with evil glee when they cant open it.
$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 004: ID 054c:02ea Sony Corp. <-- ah ha!
installing the PCI wireless card drivers in CentOS linux. I have "Sabrent PCI-G802 PCI Wireless Card - 54Mbps, 802.11g". I tried looking in google and tried multiple ways to install the driver but failed , I have followed the instructions given in the link i.e.
performed the following steps .....
1.# tar xvzf package.tar.gz (or tar xvjf package.tar.bz2)
2.# cd package
3.# ./configure
4.# make
5.# make install
I have the original cd (this cd has linux drivers also) which came with the PCI card but its not a plug and play cd like the MS windows, the cd drive is not reading the disk (But i can open it in windows 7). I copied the installation files from the cd to usb drive on my windows 7 PC and copied them on to the CentOS /home/user directory and performed the above mentioned steps. I was successful in getting till the second step. when i did the step 3 the system is asking some thing about
"Linux kernel source directory [/usr/src/2.6.18-92.el5PAE-i386]: Configure"
I just pressed the enter button and it went to the next message which is
"Linux source tree 'Configure' is incomplete or missing!" Configuration failed
I have onboard Atheros Communications L2 100 Mbit Ethernet Adapter, and I am not able to install the drivers of it. Following is the output of command lspci -v 01:00.0 Ethernet controller: Atheros Communications L2 100 Mbit Ethernet Adapter (rev a0)
Subsystem: Elitegroup Computer Systems Unknown device 2048
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at feac0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at feaa0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
[Code]...
what I need is : 1/ make run the wifi USB card D-Link DWA-110
2/ I saw I had problems with yum: when I launch the "add/remove programs" button in the menu, if the "c5-media" item is checked (and only this one) and the DVD of centOS is in the drive, then I have this message : "cannot retrieve repository metadata (repomd.xml) for repository: c5-media. Please verify its path and try again" I specify I modified the /var/run/yum.pid file (removed the only number which was here)
the main issue for me is the yum failure, because it could be needed for the wifi problem. one thing after the other! the installation is totally new (except that I modified the yum.pid file).
May I put a USB 54Mbps Wireless Network Card Adapter into Ubuntu Studio- 64 bit, does the 64 bit Ubuntu Studio (9.10) support this usb wireless network card adapter? how to let it work in Ubuntu Studio 9.10
View 8 Replies View RelatedDoes Ubunto have a driver for the WPC100 Linksys Adapter wireless card?
View 2 Replies View RelatedBeen using Ubuntu for 1 yr now on my Dell Dimension 8250 but a newbie with my Averatec AV3270-EH1 laptop circa 2005. Ubuntu 10.04 does not detect the Integrated WLAN card/adapter. I've looked at all the forums/posts but none had the issue I have. When I type lspci into the terminal i get this back:
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
[code]....
And when I type in iwconfig:
lo no wireless extensions.
eth0 no wireless extensions.
I have tried to install debian 5.0 and 4.0 without any luck. I have both tried virt-manager and virt-install with both debian-501-i386-netinst.iso, and full dvd. I't always gives me the same error:Starting install.Could not find an installable distribution at '/xen/debian-501-i386-netinst.iso'
[Code]...
I've been trying for the past week to install an icecast server on my centos 5 VPS hosted through phurix.
I've tried compiling it, installing it from RPM. but im getting nowhere. Has anybody had any luck installing it, who wouldn't mind explaining how they went about it?
I've searched google for hours on end and all I can come up with is generic cent os 4 guides that just wont work. Im not the best when in comes to linux. I do a great job of copying and pasting to a shell prompt and can use ftp etc.
if this is any use.. heres the last output from my last attempt and compiling it...
[root@vps613 icecast-2.3.2]# ./configure --prefix=/usr/local/icecast
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... no
[Code]...
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
View 3 Replies View Related1. D-Link DWA-643 Xtreme N Express Card Adapter The onboard wireless for my HP tx1000z stopped working a long time ago. This wireless adapter is in my express card slot.
2.
Code:
$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
[Code]....
I have been able to load CentOS on my computer. I have the motherboard DG41TY from Intel. It seems that the only problem I have is my network card does not work. On the Intel site there is a link to download the network driver for Linux. I did that. It's an rpm file. realtek-r8169-kmp-default-8.004.00_2.6.16.60_0.21-0.i586.rpm is the name. When i right click and say install it tried to connect to the internet for some thing and fails. of coarse it does there not loaded yet. I added a second nic that cent did recognize and got me online. I want to load the on board driver and remove the add on card. When I try to load now I get missing dependencys.
[Code]....
I have recently installed Centos. During the installation, I noticed that only sound was being tested during the installation. Once everything has been installed successfully. I can run Centos with no problem. However, when I tried to switch from one window (browser) to another. The display was slow. Thus, I suspected the driver for the graphic card of my PC is not being installed successfully. When I type /sbin/lspci | grep VGA in the terminal, I get the following output:
02:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd (rev a1)
03:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd (rev a1)
Then, I went to the dell support & driver site to download the driver. In the readme file, it is suggested to install dkms first before installing the graphics driver by typing rpm -ivh dkms-2.1.0.1-1.noarch.rpm
I managed to install the dkms without any error.However, when I use rpm to install the graphics driver as suggested by the readme file:
rpm -ivh dell-nvidia-190.42-1dkms_rhel5.3.x86_64.rpm
I get the following errors: error: Failed dependencies:
libX11.so.6()(64bit) is needed by dell-nvidia-190.42-1dkms_rhel5.3.x86_64
libXext.so.6()(64bit) is needed by dell-nvidia-190.42-1dkms_rhel5.3.x86_64[code]....
Since the above errors may be related to the missing packages then I use yum provides and install to find the missing packages. Even I try to install all the matched packages, i still cant install the driver for my graphic card. To be honest, i am not very sure whether I am doing the right things or not. how to solve this slow display problem when switching from one application to another.
What i want to be able to do is create a custom kickstart for my centOS 5 server. I want to create a bootable cd that I can pop in my server and basically walk away for 45 minutes and I come back and its fully installed. All the directions I have read so far tell me that I have to create a seperate ks.cfg and then I need my original centos cd to get it booted. Then the cd will ask for where the ks.cfg file is and I have to type the location. I just want to pop the CD in and type in linux_clean or something and have it perform a custom install based on the information and specification in my ks.cfg. How can I go about doing this?
View 1 Replies View Relatedsomebody please tell me whether it would be all right to install xp inside CentOS using VMware or it's better to do vice versa if it is ok to install xp inside centos then at the beginning when i install centos should i allocate all hard disk to this OS and later give some to xp , or initially i should keep some space for xp and install centos in the rest ?
View 1 Replies View Relatedvery much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies View RelatedIf i run lspci it shows lan card model, but lan card is not working. How do i check my lan card driver is installed or not?
Is there any way to list all installed drivers with hardware information like we have device manager in windows.
When you see this topic we are in trouble of installing driver of the raid card on hp server.
Enviorment:
OS: Slackware 13.1
Server Type : HP ProLiant DL160 G6
Raid Card: Smart Array B110i SATA RAID
Disk : SATA 250G * 2
Raid Model: Raid 1
We have setted raid model (raid 1+0) in BIOS and when we finished install Slackware13.1 ,the OS can not recognise the raid disk(also two disk).Is there anybody can help me?Some solution or driver program or other infomation etc.My email is "feng.pan@continental-corporation.com".
I would like to replace default OpenSSH version 4.3 with latest one (5.x). New version do support SFTP chroot, which is something I need.Of course, it can be compiled from source, but it is worst possible option for maintenance, since I do have few servers. Does someone provide RPMs or source RPMs at least ? If yes, what is repository/URL ?
View 3 Replies View RelatedI am having problems seeing SAS drives using Supermicro AOC-SAS2LP-H8IR adapter. The operation system is CentOS 5.6 64bit version. The operation system is installed on a SATA drive and the motherboard is an Intel Board "Classic Series" "Rockfish" G43 - Socket LGA775. From the OS I cannot see the drives. BIOS does see the PCI card and it ends there.
View 17 Replies View Related