CentOS 5 Hardware :: System Dont Boot Without A Graphic Card
Sep 7, 2010
I have an cent os system,that i installed on my server. I have installed it with a graphical installation.(with graphic card) Now the system doesnt boot without a graphic card. I want use my server without a graphic card.
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
so i have motherboard with a integrate graphic card and, i want to to install a new graphic card ( geforce 6200A)when i boot my PC on new graphic card , i have a panic kernel and when i remove the new graphic card and boot with the old card => it works can i configure centos for the new graphic ? and where , what's folder ?
ATI Radeon HD 4350 256MB DDR2 Product id: 11142-08-20R
After struggling for days with trying to install with GUI - did not work Tried installing with "linux text" - installation went through - but I get no Centos GUI logon/desktop Tried installing with network installation - installation went through - but I get no Centos GUI logon/desktop Even tried making CentOS - USB pens, installing from, and booting from.... without luck. ...then finally, I got some "smileys"...
Solution:
I downloaded the ATI package for the card;
[URL]
I installed this;
sh ati-driver-installer-10-10-x86.x86_64.run
...and then I rebooted.After boot, I only got terminal (tty1) and I did:
"startx"
NOW - i finally got GUI But the whole problem seems to driver support for new graphic cards.So what I did was actually find an old card, Radeon 7000, installed this.. I got the Centos installation - GUI, installed gnome and ...
So I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
i justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
I have recently installed Centos. During the installation, I noticed that only sound was being tested during the installation. Once everything has been installed successfully. I can run Centos with no problem. However, when I tried to switch from one window (browser) to another. The display was slow. Thus, I suspected the driver for the graphic card of my PC is not being installed successfully. When I type /sbin/lspci | grep VGA in the terminal, I get the following output:
Then, I went to the dell support & driver site to download the driver. In the readme file, it is suggested to install dkms first before installing the graphics driver by typing rpm -ivh dkms-2.1.0.1-1.noarch.rpm
I managed to install the dkms without any error.However, when I use rpm to install the graphics driver as suggested by the readme file: rpm -ivh dell-nvidia-190.42-1dkms_rhel5.3.x86_64.rpm
I get the following errors: error: Failed dependencies: libX11.so.6()(64bit) is needed by dell-nvidia-190.42-1dkms_rhel5.3.x86_64 libXext.so.6()(64bit) is needed by dell-nvidia-190.42-1dkms_rhel5.3.x86_64[code]....
Since the above errors may be related to the missing packages then I use yum provides and install to find the missing packages. Even I try to install all the matched packages, i still cant install the driver for my graphic card. To be honest, i am not very sure whether I am doing the right things or not. how to solve this slow display problem when switching from one application to another.
My desktop pc was messing up bad and i had too take out the hard drive and put it in my other desktop it works great but theres one thing it dont see my video card how can i get it too look for it? it was a nVidia and now Video adapter Intel Graphics Media Accelerator 950.
I am a newbie in rpm files, I am testing Fedora 15 (gnome3),nd I liked it, congratulations to Fedora Team, I was using Linux mint9, and I have a certainly experience with .deb files and APT, but .rpm and YUM, I am a little lost...I have a HP Pavilion dv2-1110us laptop with a Broadcom BCM 4322 wireless card; the netwokmannager said "wireless firmware missing"How can I install it?There is in the Fedora repositories?
I installed ubuntu but when I first tried to login with my correct passwords it goes in a loop and prompt me to log in again. I went to recovery mode and selected safe mode then I was able to log in without any further prompts. As a result of what happened, I unlocked the login screen and changed the setup to allow me to log in automatically and in safe mode only. I am now stuck to login in safe mode only. I tried to unlock the login screen to change to default but no chance. If there is no graphic card in the PC would that have an effect on memory or login?
I've already got two installs without much problems.. one on my laptop and another fedora13 install on an older comp just to test it a bit before installing it on my main comp. But now I've got a problem. Both those install went without problems but when I started installation on my main comp first I've noticed some graphic problems when there is installation started and there is mouse and fedora 13 welcome installation screen. there are some like glitches or something no idea how to describe them.. like bad pixels in small upper part of the screen. But ignoring that everything went OK up to the part where I can choose a standard discs or non starts like sans and stuff..
When I choose standard disc installation just freeze there. No idea what is happening. Only this that came across my mind is that there is a problem with raid maybe? There are 2x640Gb HDD in raid0, there is win7 installed, and another 1Tb HDD, non-raid member disk, where I would like to install Fedora and have a dual boot. Still got programs that I need win for I'm afraid. Installation went smooth on laptop and another comp but there is no raid so I'm guessing that could be a problem. This comp where installation froze is in short:
I've tried for months, to install a version Fedora where there could not exist any glitch with the graphic card, but without a solution. I recently have taken the path of linux systems, so I'm kinda new with this problem and don't know what to do ! The glitch make some horizontal lines dancing in screen, or can't even read anything. Here you have the spec : [URL]
I've got a problem to use intel graphic card and kde. When I enable opengl support it seems threa re refresh problems, botton now are visible, now not, it seems a blinking effect and when I move the pointer it seems kde try to re-draw the object but the object get invisible, so a relay mess. Xrender instead work but it's slow. Whit opensuse 11.2 all was ok. glxgears however shows me pretty good performance so I don't understand where is the problem.
I wonder if there is any chance to one day be able to code a graphic card (i.e NVedia and CUDA) with GNU software (i.e gfortran) like PGI dos with its fortran compiler.
I just installed Debian 5 in my pc. I have made all the updates but my screen is a bit bright and the resolution isn't very good. I think that i need to install the graphic card driver but all the solution i find in google didn't work . My laptop is Toshiba satellite pro u400 and my card is Intel GMA 4500 MHD.
I just installed a fresh Debian testing on my laptop with a VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09). Although X is running seems like it's rather slow. As there’s no xorg.conf
How the graphic card could be configured using the appropriate driver.
I try to boot up Ubuntu.It seems like everything goes on as normal (I can tell from sounds), but the screen becomes just a jumble of randomly colored lines (see photos; I couldn't get screenshots for obvious reasons).I also included some info about my computer (see pic), but I don't know anything about my graphics card, how do I find that?
P.S. I just installed a fresh version of 10.04 Lucid (dual-boot with WinXP), and as far as I remember, I haven't changed any settings or even installed any software yet!
I am trying to install lucid lynx on this laptop [URL] and I am getting the blank screen problem at installation. I tried nomodeset, vga=771, xforcevesa and a couple more and nothing seems to work. I have a livecd I burned a couple months ago. If I delete the quiet splash line at the livecd I get some repeating text too fast to see and after a couple of mins the laptop shuts off by itself. what can I do to get lucid lynx working on this pc?
im running ubuntu 11.4 im trying to install amd catalyst 11.4 for my x1300 ati graphic card but when i installed it my system couldn't start and i had to start in recovery mode for removing tha package. i think i have done something wrong with the packages how to install ati catalyst 11.4 on my x1300 graphic card
I belive there is a problem with my graphics card, because when I start a VMware vm with accellerated graphics, i get this message: Code: Cannot open file "/home/joe/.vmware/dndlogs/ * dndlog.conf": No such file or directory. 3D graphics acceleration will be disabled. This computer does not have a 3D graphics system supported by VMware Workstation. My laptop model is the ASUS U52F-BBL9 btw.
I wish to implement some part of my codes to use the GPU of my graphic card but I have no idea whether GNU as already implemented it (as for OpenMP). I mean, there are PGI Fortran compiler which embedded CUDA but I figure it's not free. I also wonder if that works only with ATI graphic cards or if for instance I can use my Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller.
In ubuntu I noticed that some apps (vlc, tweetdeck, iplayer) dont allow transparency in the system menu. This isn't a massive issue, although I'd like to know if it is possible to enable transparency, and keep the uniform look.I've tried changing the icons within the application, however it often refuses to open afterwards
I have recently set up a CENTOS server using the kernel 2.6.18-164.el5xen (x64 5.4 Install I believe). Originally I set it up with Xen to becasue I was goig to create the odd VM on it, however I no longer need to do this.Further, I believe I am having networking issues due to the installation of Xen. The machine cannot seem to locate any network addresses (eg websites) unless I put in a hosts entry for them. I believe this networking issue would be easier to rectify if the virtual networking interfaces for Xen were not installed but to do this requires a Kernel replacement. Im not experienced with doing this and the machine is located remotely to me and I dont have the original install CD available.How would I go about replacing the kernel to the non Xen version if I dont have the install CDs?