I wanted to know how to save the dual monitor using Nvidia X server Manager. I googled how to and it said to delete the "xorg.conf" However I dont have the Permission to delete this file so I would also need to know how to gain full admin access to my Ubuntu Account.
View 4 RepliesI have dual monitors running successfully with my BFG GeForce 8400GS and NVIDIA X server settings. The only problem is every time I restart, the settings go back to default, so I have to setup the dual monitors again.
View 5 Replies View Relatedjust setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
I've managed to get dual monitor support working, but it seems a little sub-standard.
- I can't find how to alter the relative y offsets of each screen
- I can't drag windows from one side to the other
I have a dual head setup with NVidia drivers. Is it possible to run gnome - screensaver (or xscreensaver) only in one head / monitor?
View 1 Replies View RelatedHow can i be able to enable dynamically my second monitor and use Unity at the same time?Summary system:HP Compaq 8710p laptop, Nvidia Quadra 320M, Natty 64bit, with attached 2nd 19" monitorDescription steps taken this far:By default ubuntu ships with the following xorg.conf conform the new minimalist trend:
Code:
Section "Device"
Identifier "Default Device"
Option "NoLogo" "True"
EndSection
I use the nvidia-current binary drivers. In this configuration:Unity works Xrandr sees 1 screen (so no configuration of second screen possible)Standard monitor configuration tool in Ubuntu shows 1 screen With [URL]
Code:
disper -d auto -e
my second monitor comes alive. My laptopscreen becomes dark (with moving mouse cursor). Unity / Ubuntu classic (no effects) go into scrambled mode. Mouse is moving, objects are
[code]...
I've just installed Ubuntu on my laptop. My laptop has an nVidia card so I'm forced to use the nVidia configuration tools. What I'd like to happen is for it to automatically start using my monitors if they're detected. OR, make a simple script that will enable the monitors without needing to restart X.
View 1 Replies View RelatedI have recently installed FC15 on my system. Dual monitor support seems to be broken with my setup. I am using the latest NVIDIA binary blob driver (270.41.19). I compiled my own kernel for it, version 2.6.39.
When gnome3 starts it almost manages to boot up, but then it crashes and gives me the option of logging out. I have my system booting into target 'multi-user.target' since I was doing some other stuff and I use `startx' to start gnome3. I tried running having X use xinerama and not use xinerama, both cause gnome3 to crash, albeit in different ways. Other than that I am running a stock install as far as I know.
If there are some logs I should be looking at for gnome3.
I have an NVIDIA 9800 GTX. I have 2 DELL monitors connect to this card, one is a 24" and the other is 21".
I am unable to use Xinerama mode with Unity, because for some reason after logging in, I get no desktop interface, only background wallpaper, and I have to force reboot.
How can I setup dual monitors in Ubuntu using Unity properly? Note that I do NOT want to use TwinView, since this results in dead space around the smaller monitor.
I am trying to install nVidia drivers on CentOS 5.4 and it is requiring kernel-source
# lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
For the installation of kernel source, I have followed the steps on [URL]. I followed the steps under 2.1 and they worked for me. Now what can be done for the installation of the kernel-source package. When I am trying to install nVidia drivers, I am getting error, following are lines from installation log of Driver.
-> Tagging shared libraries with chcon -t textrel_shlib_t.
-> License accepted.
-> Installing NVIDIA driver version 185.18.31.
-> No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]? (Answer: Yes)
-> No matching precompiled kernel interface was found on the NVIDIA ftp site; this means that the installer will need to compile a kernel interface for your kernel.
-> Performing CC sanity check with CC="cc".
-> Performing CC version check with CC="cc".
ERROR: Unable to find the kernel source tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL]. I want to install driver.
# rpm -q kernel-
kernel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-devel
kernel-devel-2.6.18-92.el5
kernel-devel-2.6.18-164.15.1.el5.centos.plus
kernel-devel-2.6.18-194.3.1.el5
kernel-devel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-source
package kernel-source is not installed
The nVidia Driver I am installing is:
NVIDIA-Linux-x86-185.18.31-pkg1.run
# uname -a
Linux harvey 2.6.18-194.3.1.el5PAE #1 SMP Thu May 13 13:48:44 EDT 2010 i686 i686 i386 GNU/Linux
Only reason to install the proper driver is to use dual monitor.
I have an Acer 1200X with an Nvidia 8200 graphics GPU integrated on the motherboard. I have an HDMI and VGA output. I have downloaded the Nvidia graphics driver using envyNG and the old fashioned way. I have tried configuring the monitors 15 ways from Sunday in the configuration and I cannot for the life of me get dual monitors to work.
When I go into configuration with the Nvidia wizzard it blanks like its going to work then just stays black with the mouse cursor. I also cannot save as I get a "parsing" error. I am using Ubuntu 9.10 and have even tried using envyNG to get the monitors to work on twinview... NOTHING Hope someone can help!
My dad who is a Linux nut came over to help and he left 3 hours later because were tempted to chuck the computer out the window...I need to figure this out as this is going to be my work computer and I need dual screens.
I have the nVidia GeForce 8500 GT 512MB graphics card, I put it in my system to get a speed boost and for a dual monitor setup, I don't have the proprietary drivers installed I tried installing them, and when I did it asked for reboot, so I did, and when it came back up only one monitor was in use, and it was running very very sluggish, so I opened up the Monitors from the settings and it said to use nVidia's thing, so when I did, I enabled the second monitor, and hit apply, and it asked for a restart of Xorg, doing that came back telling me that no monitors were find, and a reboot brings me straight to tty1... I tried both the recent version and the older one, both did the same thing, I really wanna get my Compiz effects back. is there a way to get this working? I will do anything you ask if it solves the problem...
View 2 Replies View RelatedI used preupgrade to upgrade from F11 to F12. In F11, I used the proprietary nVidia drivers from rpmfusion, and they worked well. I have refrained from installing the nVidia drivers in F12, because of the problems reported for users of KDE. I removed my old xorg.conf, which has references to the nVidia driver and to "TwinView," the proprietary method of managing two screens, so as to let X discover both monitors.
Now, however, my second monitor stays black, even though xrandr and KDE RandR show both monitors correctly. Xorg.0.log shows the nouveau driver is loaded. (I also tried to create a new xorg.conf following guidelines from the web, but many of the guidelines are from before xrandr, and I'm not confident I have it right yet.) It seems that X believes I have two monitors, because I can drag a window off into the blackness (and it's never heard from again!) I know that the hardware is working, because I just booted into Windows 7, and I could see the desktop on both windows.
How do I convince X and KDE to display on both monitors?
I run opensuse 11.3/kde desktop.
- updated to KDE:Factory
- X11 repository (V1.9.3)
- proprietary nvidia drivers (260.19.36)
Video card is a Quadro NVS 290. A dual head configuration using twinview is run.
The desktop becomes slow almost immediately (couple of seconds) after logging in (all applications). Turning off desktop effects does not make a difference as well as trying the various recipes on the internet regarding x.org conf-files.
The only action restoring responsiveness is to simply start nvidia-settings. Putting the following pseudo-action into a script-file and mapping it to a key allows to have a workable environment:
nvidia-settings -a PixmapCache=0 && nvidia-settings -a PixmapCache=1
It is very annoying having to press a key every minute or so. Instead of creating a cronjob I would like to solve this issue. This behavior has been consistent across kde/x-org/nvidia/kernel updates for many month now.
I have Ubuntu 9.10 installed on my computer. I also have Galaxy (Nvidia) 9500 GT PCI-E card installed on it. I can get both monitors (Acer X223w) to work but every time I shut off the computer and turn it back on the second monitor is shut off. I just need to turn it back on using Nvidia X Server Settings. I have tried to save my X configuratin file but I keep getting an error of:" Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'. I have a feeling this is because I am not signed in as root. Is this correct? If this is the case is there a way to get to sign in as root not using the command lines? Otherwise they need to remove this button. I can manually create a backup (copy paste into a text file). I think. Getting back to my Xorg.conf file, I think I need to modify it to have two screens. I have also got some information on my video card using the lspci command. I think I need some information from this. I have written below (towards the bottom) what I think the file should be. Now before I do this, does anybody know of an easy way to back up my whole computer? With my luck I am about to screw something up big time. I think I can just get away with the text file that I copied from the Xorg. Worst case scenario I will just manually replace the file.
Information on my computer:
OS: Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia)
Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM
Ram: 4 GB (I think, its been awhile since I built this thing)
DVD Burner: LG
Here is a copy of my xorg.conf file: (I don't think it matters but I have both monitors turned on right now).
from the lspci | grep VGA:
I think I need the 01:00 information for my Bus ID. The only thing that I am confuse on is that I was expecting to see two of them.
Okay, this is what I think I need to do: I tried to add color to make it easier to find the changes I made but for some reason I cannot. I will add **** on the end (right side) so my additions and questions will be easier to find.
Do I need to add another Device for the video? Doesn't make sense to me since I only have one video card. I was told it should be based on the # of chips on the card. So I guess I should have two of them since I have two outputs.
I have repeatedly installed CentOS 5.5 64-bit on a Dell T3500 with an nVidia Quadro FX 580, in an attempt to get dual monitor support to work to no avail. Everything works fine when just one monitor is plugged in and I do not try to enable or plug in a second monitor. I have installed the Dell DKMS, and the Dell recommended drivers (from Dell site) on one installation, I installed the nVidia drivers (from nVidia site) on another, and have tried with what CentOS loads by default on another. The results are the same every time: When I reboot as directed I get a black screen. I can recover by hard shutdown and unplugging one of the monitors, but that doesn't solve my problem. Has anyone had a similar experience, or have any helpful guidance? I am not very Linux savvy. This is for multiple machines in a corporate environment.
Information for general problems.
== BEGIN uname -rmi ==
2.6.18-194.26.1.el5 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==
[Code]...
I have activated dual screen monitors using the Nvidia driver GUI as Sax2 would not correctly configure it. Now at every boot I get the message "undefined video mode 31a, press [enter] for a list of video modes or [space] to continue. After pressing space the system boots to my liking, how can I get rid of the message at every boot up?
I am using Suse 11.2 and KDE4.3.1 My video card is an Nvidia Geforce 7100 GS I thought I was using the Nvidia drivers as I have a GUI from Nvidia in my launch menu if I search "Nvidia" and I have completed the one-click installation. Although when I go into "My Computer" it says driver unknown.
I have 2 monitors, a 22 inch samsung as my main and an acer as my alt. I am trying to get the samsung monitor to display, but is is disabled. So I enable it as a separate x display, then save, but when I restart x, the settings didn't save. I save the config under under /etc/X11/xorg.conf. What am I doing wrong?
View 4 Replies View RelatedI have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
trying to enable the nvidia drivers because i wanted to use Gnome 3 and had zero luck. So once i read that suse was a better bet i installed that. the nvidia drivers have installed fine and i can get my required resolution of 1440x900 if i use an old saved xorg.conf file i managed to randomly cobble together a few years ago .. this is it ..
Code:
File generated by XFdrake (rev 247269)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************
[code]....
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies View RelatedI need to find out a command to enable and disable a secondary monitor using the Nvidia X Server. I've got a monitor attached to my laptop that I don't use all the time and would like to just have a launcher to switch between "twinview" and "disabled" quickly rather than having to go through the menus. It's physical position is vertically above the primary monitor so I have to put in a custom position every time I enable it.
View 8 Replies View RelatedCurrently I have two 1920x1080 screens running in Twinview on my Geforce 275 graphics card. Want I want to do is a quick simple way of disabling my secondary monitor when playing video games or using xbmc to watch movies, etc. I've tried a few applets but they require the xandr function which I think Nvidia doesn't support.
Is there a way to disable this quickly other than loading up nvidia-settings and disabling the monitor everytime. I don't really want to use two seperate x sessions and xinerama due to the fact you can't use compositing.
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies View RelatedIs there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
View 2 Replies View RelatedThis is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
I am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.
Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.
I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.
Here are my specs:
CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
I have an external monitor at work, but not at home. I take my laptop home and when I come back the settings are off. My monitor is above my laptop, so I have to rearrage displays and save every time its plugged in. Isn't there a system file or something somewhere that I can write to and save the current state as the default?
View 5 Replies View RelatedI found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.
View 1 Replies View Related