I'm trying to install ispCP and i need to start mysqld but it won't seem to start. I'm somewhat of a nooblet to linux (have a year of VPS 'experience', but nothing too fance) so bear with me.
When i run "service mysqld start" it fails with the error: "MySQL Daemon failed to start."
I ran: "tail -n 30 /var/log/mysqld.log" and this is the output;
[root@dragon575 mysql]# tail -n 30 /var/log/mysqld.log 110726 16:03:10 InnoDB: Completed initialization of buffer pool 110726 16:03:10 InnoDB: highest supported file format is Barracuda. 110726 16:03:10 InnoDB: 1.1.8 started; log sequence number 1588761 110726 16:03:10 [ERROR] Aborting
I have Centos 5.1 and im a total newbie. I have managed to get it running with Apache and PHP but after I install mysql it fails to start with the above error. I have removed it as well using YUM and reinstalled it but it still will not start.
I have problems setting up a (2 server) cluster. I get the following messages in syslog:
Oct 14 13:02:21 korzel ccsd[7823]: Starting ccsd 2.0.115: Oct 14 13:02:21 korzel ccsd[7823]: Built: Sep 3 2009 23:26:21 Oct 14 13:02:21 korzel ccsd[7823]: Copyright (C) Red Hat, Inc. 2004 All rights reserved. Oct 14 13:02:21 korzel ccsd[7823]: cluster.conf (cluster name = cl_vpanel, version = 1) found.
[code]....
Tried with the "basic" hosts file as well, eg with only the localhost lines in it. Both server run centos 5.3, up-to-date.There is no real error anywhere which might explain WHY aisexec daemon won't start. When i start openais manually (/etc/init.d/openais start) it starts without any errors.
I have a VPS running on centos-5-x86 and mysql server went down two days ago this is my mysql server log
110602 18:28:09 mysqld started InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 110602 18:28:14 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery.
I have installed ddclient for use with dyndns.org.
I can manually run it from the prompt with /etc/rc.d/init.d/ddclient start and can verify that it works by checking that my IP has succesfully been changed at dyndns.
When I reboot though, during the startup, I get the following: Starting ddclient: /bin/bash: ddclient: command not found [FAILED]
I am very new to Linux, so I am not sure what or where I should be looking to solve the problem. It seems to me that it must be looking in the wrong spot for ddclient, but I don't know what to check or change to point it at the right place.
I just did a yum upgrade (5.3 to 5.4) on one node of my three node cluster (RHCS), which did:
Rebooted to the new kernel, but cman failed to start. Rebooted back to the previous kernel, but no change, so it doesn't appear to be the kernel.... Some errors are:
On the upgraded node, the following processes are running:
Whereas on the non-upgraded node, the following processes are running:
I have a Toshiba A205 S5804 laptop that had Vista Home Premium installed. Tried to install Centos 5 (2.6.18-8-el5) and when I went through the install process, X Server failed to start so I had to go thorough the command line install. Once the install completed, it only booted to console.
The default resolution for this laptop is 1280X800 but I dont know if that is why or not. if anyone has a clue about my issue, please let me know.. I really dont want to install windows.
My hp does not want to start X for some reason. I have so many errors. I made an account to just see this problem be fixed. Now when I type "startx" I get back, "bash: /usr/bin/startx no such file in directory". I have to use GRUB due to the fact I forgot my login. Although, I do remember my password.
my Sabayon desktop won't boot into runlevel 5 anymore:
Code: ERROR: avahi-daemon failed to start Also can't start avahi manually, verbose mode gives no extra information, debug says: (...) Code: * Starting avahi-daemon ... + /usr/sbin/avahi-daemon -D + eend 1 + exit 1 * ERROR: avahi-daemon failed to start (sic)
I suspect this to be related to the hplip drivers I installed before the last reboot, all I did was select the package in sulfur, and as it worked right out of the box, I changed nothing else.
If I try to open Cinelerra from the GUI, it does nothing. If I try from the terminal I get this:
Code: cinelerra: error while loading shared libraries: libfaad.so.0: cannot open shared object file: No such file or directory I've been looking around all over the place and can't find a way past this. I really want to get it going again, can anyone help?
I've checked in synaptic and I have libfaad2 2.7-4
I'm creating a script that I want to run every time any user logs in (not only on the GUI, but also via SSH or via text terminal). The script will check if a daemon program is running (one per user or per session, haven't decided yet) and, if it isn't, will start it. I want this to be system-wide, not per-user. I thought about using /etc/profile (or creating a file in /etc/profile.d/) for CLI logins and /etc/X11/Xsession (same remark, Xsession.d) for GUI logins. My problem is that if the user uses a non-Bourne shell (e.g. TCSH) this won't work. Is there any initialization script that is run no matter what shell the user has?
I want to start a daemon as another user, but it doesn't seem to work. What I'm trying to do is run svnserve (subversion server) as the apache user.
The following works, but it's run as the root user in this case
Code: svnserve -d -r /var/www/svn --pid-file /var/run/svnserve.pid Trying to run as apache user doesn't work Code: su apache -c "svnserve -d -r /var/www/svn --pid-file /var/run/svnserve.pid"
I am overseas at the moment, and the wife has been having issues with my machine. After many hours of trying to to talk her through doing things, one of my geeks suggested installing Teamviewer and doing it myself.
I have SSH and WinSCP from work. I am using amd64 so the first attempt to install failed due to unmet dependencies. Then I read the MultiArch bit, installed ai32-libs and the install seemed to work. When my wife tried to start TV, it stated that the daemon was not running. When I try to restart the daemon, I get this.....
I've been trying to get my internal microphone to work in F12, and as part of the things I've tried I had the seemingly bad idea of reinstalling pulseaudio. The problem now is that pulseaudio fails to start... The following is from /var/log/messages, and is repeated several times:Code:Nov 24 08:51:20 localhost pulseaudio[6300]: main.c: Daemon startup without any loaded modules, refusing to work.
I have fedora 12 32 bits installed on a Macbook pro (intel core duo) I did "yum update" this morning, I have restarted the system and got the following message:Starting abrt daemon: abrtd: Failed to start: got sig 2 FAILEDI have browsed in the web but I cannot find useful information. Then I typed:$rpm -qa | grep abrt
I have installed version of ntop 4.0.3 by guide.But I can't start ntop daemon/service. I didn't find a service file for starting.During the installation there was no problem only want to RRDTool so I installed that. Now there is no necessary package required.
I recently built the following items of cdemu from the svn repository: libmirage, vhba-module, the daemon, and the client. I have the library installed, the kernel module loading on boot-up of my system, but aside from that, I can't seem to figure out how to use the client.
I have tried manually starting the daemon a couple of times, but can never get past that part. I can't remember the exact error offhand (away from home comp right now) but it was something to the effect of not being able to create the virtual device "0" in /dev.
I have a backtrack distro on a usb stick. I wish to do the following :- (a) Partition the usb stick to have a ext3 filesystem, so that the instln may be persistent for the changes. But the fdisk utility creates partitions as dev/sdb1p1 and /dev/sdb1p2. These however, could not be accessed by mkfs utility. How to overcome this problem. (b) Next , I downloaded the nessus .lzm file and put it in the /base/module dir. But unable to start the nessus daemon. It suggests an error regarding unable to create /opt/nessus and /etc/nessus/nessusd.conf. I think starting nessus as root would help but the problem persists!
Ive been searching half the internet for a solution for a strange problem im having with a server (CentOS 5.2 Final). For no apparent reason, the server will just be powered off.I've looked in the dmesg log and /var/log/messages file, but that doesnt show anything, except the "syslogd 1.4.1: restart." message after booting it up again, and hours in advance of the crash a "suhosin" alert message.
Am running the latest CentOS5 with Bind. Bind will run for a period(time period unknown) the shutsdoown. We need to every day start the service. When the service starts there are no errors given.
I am using Centos 5.3, and when I try to copy a batch of files, it just slows down and stops, the files are not that big, few megs. first I realized it when I used secure ftp, I thought maybe my internet is slow, but now it does even from an external USB drive,.
I just got the problem while starting the dhcp daemon. Its showing failed. I need to start it for my clients to be autoinstalled. I am having CentOS 5.2 linux. I've installed all optional packages also while installing CentOS. How to start the dhcp daemon? I've tried the /etc/init.d/dhcpd start also. But it didnt work. Showing Failed.
I am not able to start mysql server...when i type command sevice mysqld start it saysMySQL Daemon failed to start.Starting mysqld: [FAILED]so how to solve this problem ?