I have a VPS running on centos-5-x86 and mysql server went down two days ago this is my mysql server log
110602 18:28:09 mysqld started
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
110602 18:28:14 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
[Code]...
for some reason, which I have exhausted all my thoughts upon..
I have mysql 5.0.77
I just made an amendment to the auto_increment_increment variable.. from 10 to 1
Gone to restart mysqld (im on redhat FYI) and get the error:
'Timeout error occurred trying to start MySQL Daemon.'
It fails to stop, and obviously fails to start.
I have included below my 'my.cnf' file but I cant see any issues with it, and can't for the life of me think why there is something wrong.
If I ever come across an issue, I don't tend to ask but instead try and figure it out (usually with success) but this time.. I just cannot get my head around it..
I am trying to set my root password for my mysql database. After I enter /etc/init.d/mysqld start
[code]...
Timeout error occurred trying to start MySQL Daemon. Then when I try to set the password for my root account I get
[code]...
I have fedora version 8 with mysql 5.0.45 installed. I have also installed drupal. Recently drupal gave me an error "error code 28". When i checked it out it seemed to be with the db. When i tried to created a db (for testing purposes) in root...i wasn't able to. so then i tried to restart mysql ...it stopped but unfortunately i have not been able to get mysql back up...i get a message saying
"Timeout error occurred trying to start MySql Daemon".
I have Centos 5.1 and im a total newbie. I have managed to get it running with Apache and PHP but after I install mysql it fails to start with the above error. I have removed it as well using YUM and reinstalled it but it still will not start.
View 4 Replies View RelatedI'm trying to install ispCP and i need to start mysqld but it won't seem to start. I'm somewhat of a nooblet to linux (have a year of VPS 'experience', but nothing too fance) so bear with me.
When i run "service mysqld start" it fails with the error: "MySQL Daemon failed to start."
I ran: "tail -n 30 /var/log/mysqld.log" and this is the output;
[root@dragon575 mysql]# tail -n 30 /var/log/mysqld.log
110726 16:03:10 InnoDB: Completed initialization of buffer pool
110726 16:03:10 InnoDB: highest supported file format is Barracuda.
110726 16:03:10 InnoDB: 1.1.8 started; log sequence number 1588761
110726 16:03:10 [ERROR] Aborting
[Code].....
When I want to start nfs services ,I get this error, Starting NFS daemon: [FAILED]
View 1 Replies View RelatedOne person using our DNS servers reported a very curios problem. When he tries to access [url] he gets a timeout error. I tried loading the site using chrome, firefox and ie8 and I get the same results.
Here is what dig gives me:
If I use google DNS I get the correct response:
I using Fedora 12. When I am going to start MySQL server then error is come
MySQL Daemon failed to start.
Starting MySQL: [FAILED]
MySQL Details :
mysql-5.1.42-2.fc12.i686
I have MySQL 5.1.34 and PHP 5.1.6 installed on my system, how do I install php-mysql? Each time I try, it says
mysql-5.0.45-7.el5.i386 from base has depsolving problems
-- > mysql conflicts with mysql-server-community
error: mysql conflicts with mysql-server-community
I just configured a complete Cent OS 5.2 system for use as a web server. I can configure Apache and PHP but MySQl seems to be causing some issues -
[mysqld]
datadir=/var/lib/mysql
socket = /var/lib/mysql/mysql.sock
user=mysql
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
[Code]...
I am not able to start mysql server...when i type command sevice mysqld start it saysMySQL Daemon failed to start.Starting mysqld: [FAILED]so how to solve this problem ?
View 10 Replies View RelatedI'm trying to get mySQL Daemon to start when the machine starts up (and it requires root privileges to run). The command to startup would be
Code:
sudo /etc/init.d/mysql start however that would prompt for a password, and that would not be very well possible now would it? Now, if i try to start it up without being root, it will not start. So this is my problem, maybe someone out there would know a bit more about this than me.
On a newly installed centos I updated mysql-* & php-* files using RPM repository, and I installed phpmyadmin. After that i tried restarting mysql and it just said: failed
Code:
service mysqld start
MySQL Daemon failed to start.
Starting mysqld: [FAILED]
[Code].....
I am trying to install Koha on centos5.5. Afte installing myqsl it starts normally. But when i add following lines into my.cnf and trying to restart mysql again it says that restart is failed.
here is the lines that i add into [mysqld] section
default-character-set = utf8
character-set-server = utf8
skip-character-set-client-handshake
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
[Code]...
I tried to install php from source file on centos server and i got the error as # ./configure --with-apxs2=/usr/local/packages/apache/bin/apxs --with-mysql --prefix=/usr/local/packages/apache/php --enable-force-cgi-redirect --disable-cgi --with-zlib --with-gettext --with-gdbm
checking for specified location of the MySQL UNIX socket... no checking for MySQL UNIX socket location... /var/lib/mysql/mysql.sock checking for mysql_close in -lmysqlclient... no checking for mysql_error in -lmysqlclient... no configure: error: mysql configure failed. Please check config.log for more information.
When i run the command:
It shows output as:
I follow instruction on how to install ISPConfig2 in CentOS 5.3. CentOS 5.3 ISPConfig 2 At part 10. MySQL(5.0), I stuck with an error. Said that "Host is not allowed to connect to this MySQL server. What is the problem? Why not allowed?
View 1 Replies View RelatedI have installed vnc-server on my CentOS 5.6 virtual machine. I can connect to it with a java web browser so it seems to be working. However, I get the following error message when I start, stop or restart the vnc-server process. Quote: Starting VNC server: 1:ken xauth: timeout in locking authority file /root/.xauthkk661q
View 5 Replies View RelatedI think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
I'm using Ubuntu 10.04 LTS - the Lucid Lynx.
I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".
But its giving error message at the end of installation when its trying to start the server.
The error message is as follows.
When i tried to start the server after the installation, i get this error message
Note : The file "/etc/mysql/my.cnf" is empty.
i am currently trying to install vsFTP onto my new linux server and btw i just started using linux today this is my first time using linux so i got the ftp installed good it got downloaded and everything then i went to open a port for my server for vsFTP i used this comand to open it "-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT" then i closed it by pressing ESC then :wq! and it brought me back to my comand line again so now when i try to start the ip table thing with the comand "service iptables start" then when i execute that comand putty respondes with this "Applying iptables firewall rules: iptables-restore: line 1 failed [FAILED]"
The install Guide im using: [URL]
When I reboot my laptop compaq nc4400, HAL daemon fails to start.
what should I do?
Is this the reason why there's No Network devices available on my top right hand corner of my machine?
I have problems setting up a (2 server) cluster. I get the following messages in syslog:
Oct 14 13:02:21 korzel ccsd[7823]: Starting ccsd 2.0.115:
Oct 14 13:02:21 korzel ccsd[7823]: Built: Sep 3 2009 23:26:21
Oct 14 13:02:21 korzel ccsd[7823]: Copyright (C) Red Hat, Inc. 2004 All rights reserved.
Oct 14 13:02:21 korzel ccsd[7823]: cluster.conf (cluster name = cl_vpanel, version = 1) found.
[code]....
Tried with the "basic" hosts file as well, eg with only the localhost lines in it. Both server run centos 5.3, up-to-date.There is no real error anywhere which might explain WHY aisexec daemon won't start. When i start openais manually (/etc/init.d/openais start) it starts without any errors.
when i want to install centos 5.5 i take this error:
An error occurred - no valid devices werefound on which to crate new file systems.
my hardware specification is:
motherboard: gigabyte p55a-ud3
ram: ddr3 crucial 4gb
cpu: corei5 750
hdd: 2X1TB wd black edition raid1
i was able to connect the first time following the instructions here: [URL]
1. first time i was able to connect i used the nx client for Mac OS X. I logged off.
2. then i decided to test this using Windows nx client and i got:
NX> 203 NXSSH running with pid: 604
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
[Code]...
I'm using with success NX server and client on Ubuntu 11.04 on both side. Yesterday the server crashed and now the client can't connect to it. The client works well because if I try to connect to an other server it works well and if I try to connect to this server with an other user it works well. So I think that there is a problem with my user. I have tried to solve the problem as explained in the details of the error. Unfortunately there is no file /var/log/messages so I can't search the code of the exception.
Code:
NX> 203 NXSSH running with pid: 3877
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: 10.1.0.60 on port: 22
NX> 202 Authenticating user: nx
[Code]...
My problem now is that lsyncd does not automatically start if the server reboots. I need lsyncd to start automatically also using the --delay 5 option.
I've had trouble finding any info on this other that some Japanese sites (I cant read japanese) using chkconfig, although it didn't work as I think chkconfig is depreciated anyway.
I installed LAMPP a couple of weeks ago and was working fine. Today when I try to start lampp, it will only start MySql and ProFTPD. It says "XAMPP: Another web server daemon is already running." How can I find out where this other server is located and stop it?
View 2 Replies View Related
