CentOS 5 Hardware :: Debug My New ATOM Motherboard ?
Feb 3, 2009
I did a couple searches for my Chipset and my Motherboard but I didn't get any results, I am building a Router/PBX to replace my current one and CentOS based distros are my distros of choice (Trixbox/PBX in a Flash). My new motherboard is the Jetway NC91-230-LF which has the INTEL 945GC Northbridge and an Intel ICH7 Southbridge. Which I have seen has a few known issues. When I attempt to boot the CentOS 5.2 installation or any other CentOS based OS I get the following error message:
I have also chronicalled the project at my blog.
View 11 Replies
ADVERTISEMENT
Jan 1, 2010
I'm running CentOS 5.4 on an Atom 230-based MSI MS-7418 motherboard. I'd like to monitor this host' CPU temperature as well as the HD's temperature, but can't get lm_sensors to work:
Code:
# uname -a
Linux msi.workgroup 2.6.18-164.9.1.el5 #1 SMP Tue Dec 15 21:04:57 EST 2009 i686 i686 i386 GNU/Linux
[code]....
View 6 Replies
View Related
Aug 2, 2010
I have decided to do away with windows for the obvious reasons. I have carried out a new instal of Ubuntu 10.04. on a formatted HDD in a Gigabyte GA-510UD atom mother board and have found that I can't install the M/B drivers from the indtall disk.
View 5 Replies
View Related
Jan 7, 2010
is it possible to run xen on intel atom or celeron for learning purposes, as when i start the virt-manager it doesn't give me the new option the file menu and when i try to do xm create domain1 it gives error like try running it with config file
if atom/celeorn can't run xen why does it gets installed on the system.
View 2 Replies
View Related
Aug 24, 2010
I'm trying to do a fresh CentOS 5.5 installation on a baby server with a Foxconn D51S based barebones system. BIOS is P04, the latest on their website.
When I have one 2GB memory installed, I am able to install the system and run it through some very vigorous testing without any issues. I have two DIMMs and both work just fine one at a time.
When I install two 2GB memory, it starts to crash hard during memory intensive operations, like mkfs or fsck.
I tested a 2.6.35 based kernel just in case it was an issue of old kernel + new hardware but the error persisted.
Google hasn't been helpful, and Foxconn support basically says "It runs windows, so that's good, right?").
What I've noticed is the system, when booted with one DIMM correctly reports that it has 2GB of ram (minus 8 megs for video, etc), but when I boot with both installed it seems to detect 4864MB of ram instead of the expected 4096.
View 3 Replies
View Related
Mar 3, 2009
Using the onboard gigabit ethernet interface on an Asus M2N-CM DVI motherboard (nVidia chipset) with CentOS 5.2 the ethtool utility recognises that the NIC is capable of gigabit:
# ethtool eth0
Settings for eth0:
Supported ports: [ MII ]
Supported link modes: 10baseT/Half 10baseT/Full
[code]....
View 8 Replies
View Related
Jul 24, 2009
I need to put a pc together for home use to act as my server. I need recommendations for a asus motherboard. I need it to support 5.3 and looking at asus website I cannot for the life of me figure out what I need. I also want to use a amd cpu. It has been years since I built my own pc and never for linux
View 3 Replies
View Related
Feb 24, 2010
I cannot get sound from a machine that has the M4A785-M motherboard, and a Radeon HD 4670..
My details are at: [URL]
View 7 Replies
View Related
Mar 24, 2010
I have a new setup, computer has only been running a couple days. The sound card is onboard, on a P7P55-M mobo. Kernel version is currently 2.6.18-128. There is no sound at all coming from the speakers.
Here are my ALSA drivers:
ALSA Driver verion: 1.0.14rc3
ALSA Lib package: alsa-lib-1.0.17-1.el5
ALSA Utils package: alsa-utils-1.0.17-1.el5
lspci:
00:1b.0 Audio device: Intel Corporation Ibex Peak High Definition Audio (rev 05) code...
View 1 Replies
View Related
Nov 17, 2010
The OS installed smoothly, however when I got to the desktop and wanted to go on firefox, I didn't realize I had no connection to the internet. Then I found out from the web and through the network configurations that said my NIC's driver is not installed. After many hours of researching, I could see people had similar problems with me and I tried to take those solutions and see if it'll work for me. Unfortunately it did not.
Here is my ethernet controller:
/sbin/lspci -v
02:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114
PCI-E Ethernet Controller (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-CM Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 11
[Code]....
View 5 Replies
View Related
Aug 17, 2010
I am trying to run yum update on my CentOS 5.3 server, 32-bit, but it responds with the following:
Quote:Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
memcached is needed by (installed) memcached-selinux-1.2.8-1.el5.i386
Complete (1, [u'Please report this error in [URL]...
View 1 Replies
View Related
Apr 1, 2010
I recently upgraded my MBP motherboard which evidentially has an advanced graphics architecture that employs both the NVIDIA GeForce 9400M integrated and NVIDIA GeForce 9600M GT discrete graphics processors. I had no problems powering my external monitor until the MB upgrade. Now I get an xorg.conf conflict where
[root@cloudstation X11]# lspci
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:01.3 RAM memory: nVidia Corporation Unknown device 0a8d (rev a1)
[code]....
View 1 Replies
View Related
Jun 7, 2011
How to monitor hardware temperature (CPU , Motherboard , HDD etc) in CentOS/RHEL ?
View 3 Replies
View Related
Jan 17, 2010
I have a newly installed CentOS 5.4 on Gigabyte G31M-ES2C, I had to change the motherboard since it has some problems. Unfortunately the new motherboard is a rev 2.x board, which has a different onboard NIC (old one is RTL 8102E, new one is AR8132), so now my ethernet connection doesn't work anymore (no eth0 device), I assume I need to install a new driver for the AR8132? If so, what's the steps to do so?lspci shows Ethernet controller as: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
View 3 Replies
View Related
Apr 8, 2010
I am trying to clone a working Centos 5.4 system onto a new box with a ASUS P5KPL-CM motherboard. I have done so by plugging in a Realtec lan card - but can't get the motherboard lan working. Googling tells me the motherboard has a Atheros L1E lan chip - but I have installed several kmod drivers from ELREPO - but still can't get the on-board lan working. So far I have installed:
kmod-atl1e
kmod-atl1
I have just installed these with yum - but no new hardware appears in the network gui dialogue. Am I missing some step here - or is there another driver I should be looking for.
View 5 Replies
View Related
Jun 8, 2010
First time I am having issues with Centos.
I bought a Intel DQ45CB LGA Q45 Micro ATX Motherboard and I am installing the 64 bit version of centos.
The install of Centos goes just fine. However when I first try to boot up, after post is done, I get a blank screen. I do not even get on the Grub screen. No access to any of the ttys. No access to anything, files, folders. I only get a blkinking cursor, no command prompt, nothing.
This happened with Centos 5.2 and 5.3
Just for the hell of it, I installed XEN Xitrix and I have no issues like that.
View 2 Replies
View Related
May 19, 2011
I've a e-machine netbook with the atom n450 processor.
Even with a non-stressing use (only browser ad music player) the cpu gets too hot.
Today with lm-sensors i detected a 58°C temperature.
It's not a sensor problem because if i touch it i feel it really hot.
With Windows xp i haven't this problem.
The frequency scaling works (i don't know if well) because with conky i see it change.
What should i do or try?
On the system all the packages I've installed comes from the repository, all but volume icon.
View 1 Replies
View Related
Apr 3, 2011
I want to make a x86 based router using a mini-ITX board and I found 2 options, Asrock AMD-E350M1(~$140) and Intel Atom D525MW(~$94).
1. AMD-E350:
Pro:
It's slightly faster than atom D525.
It has AMD-V(virtualization support)
It can be used as HTPC(1080p)
It can be used for GPGPU
Uses ~max 25W for CPU+(capable)GPU
Con:
Single Channel Memory
PCI-e slot is bad for router( I found 4-port PCI NIC at $25. 2-port PCI-e cards are $60 and 4-port PCI-e cards are $150 )
2. Intel Atom D525:
Pro:
PCI slot(see above)
Dual Channel Memory
Cheaper than AMD E-350
Passive Cooling
Con:
Uses SODIMMs
It cannot be used as HTPC(doesn't play 1080p, not even 720p)
It cannot be used for GPGPU
I plan to use the mini-ITX board with 4GB RAM:
AMD E-350 with 4GB ram(1x$51)=$191 -> cpubenchmark.net score is 744. Regarding the CPU the value is 3.8952/$
Intel Atom D525 with 4GB(2x$29)=$152 -> cpubenchmark.net score is 714. Regarding the CPU the value is 4.6973/$
I would like to have a mini-ITX board that is capable of having one VM runing the router OS and 2nd VM runing pyrit on the GPU.
If it is possible to run pyrit on the APUs GPU I would choose AMD E-350 because I can put in PCI-e NIC to run the router OS. If not, I have to stick with Intel Atom D525, 4GB RAM would be a waste, but also I would waste a lot of CPU time.
View 10 Replies
View Related
May 16, 2010
Can you run Linux on this? [url] And will the WIFI work with Linux? I have been looking for something like this for a long time. I want to run Centos 5.5 on it.
View 2 Replies
View Related
Mar 19, 2011
I found Atom CPU is slow when booting the system, screen shows "Loading Linux ......................", is it because the N270 is running at half speed before the kernel is completely load to memory?
Kernel 2.6.32 is even slow because the kernel image is bigger than lenny. Is there a way to speed up this?
View 2 Replies
View Related
Jul 9, 2010
Im trying to be able to output video to my tv with a low end atom cpu box(link below) running debian lenny. I realize it wont likely be true HD video. I also realize I wont be getting surround sound. My tv is a little bit older so it doesnt have a monitor input or I would have tried that. It does have HDMI and component though and i have a DVI to hdmi adapter and audio cables that will work once I have a video out solution. It does have a PCIE expansion bay but the power supply is only like 150w so i dont know that Ill be able to use a regular video card. I had considered some sort of usb output but dont know if any of that will work on linux. Any suggestions? Im pretty novice with the whole computer on my tv area and dont have alot of money to build a whole new system or i would just do that.
[URL]
View 2 Replies
View Related
Nov 11, 2010
on my new nettop acer veriton n281g ( atom d425) i need a VM with XP . What is the best choise virtualbox or kvm or other ...
View 1 Replies
View Related
Jul 28, 2010
I'm buying a new fanless desktop unit with 2 x 1.66GHz Intel Atom D510 CPUs. The vendor calls these a '64-bit processor'. But the unit has just 4Gb of memory and I don't want the fuss of 64-bit for the basic stuff I do. So I asked them to load Lucid-32.
Will the processors work with 32-bit?
The vendor tells me 32-bit won't make full use of the 4GB, only three and a half, but all else will be fine. So they'll load 32 and I'll try a live DVD of 64 in my own time. But I thought 32 bit was fine up to and including 4GB of memory?
View 2 Replies
View Related
Mar 23, 2011
I get a wrong architecture error when I try to install the .deb .A fully 32 bit enabled install of Ubuntu 10.10 86-64 on a D525 Atom based system does not seem to work at all. It will not install with gdebi or the new Ubuntu software centre.I have the 32 bit required OpenMotif libs installed...and all the other stuff that is i386 arch works perfect. I really want to run the 64 bit os but perhaps I can dual boot it with Fedora 32. There is nothing in the asus bios of the board that says emulate i386 like with AMD 64 chips...I thought that the D525 atom was fine as it will run 32 bit XP or any 32 bit linux.
So what might be the trouble with running 32 bit software on Ubuntu 10.10 64 on this machine? Why does the Ubuntu hacked gdebi software install system insist that i386 software is the wrong arch for this intel atom?This is really maddening as my wife's work demands this citrix client, and the last thing that I want to do is run out and buy an oem of Windows 7.been there done that with 98, XP, and Vista I am looking to ditch her noisy POS vacuum cleaner vista machine..but I cannot do it until I have the linux citrix client installed and working.
View 1 Replies
View Related
Jun 16, 2010
Does anyone have any experience with the Atom processor line? How do they compare single core to single core, dual core to dual core with other Intel and Amd chips? Do they work well with linux, or are there hardware issues?
View 1 Replies
View Related
Jan 19, 2010
Just I need some clarification. Is there any different form compilation is for Intel ATOM processor? Its same like all other intel processors right? Or it has any different type of compilation should be followed for Intel atom processor?
View 5 Replies
View Related
Jan 25, 2010
Is it possible? Its an Acer Aspire One.
View 1 Replies
View Related
Jan 19, 2010
Just i need some clarification. Is there any different form compilation is for Intel ATOM processor? Its same like all other intel processors right? or it has any different type of compilation should be followed for Intel atom processor?
View 1 Replies
View Related
Feb 20, 2010
I want to create my own Atom feed file covering some informational posts on a web page. I will maintain it by hand, so I would prefer it to be as minimalistic a file as possible, yet still a valid Atom file.I found Atom specification documents online, but there was so much information I felt like a rowboat on the Pacific ocean. I did not find a specific section declaring exactly what /had/ to be in a Atom feed file.
View 2 Replies
View Related
May 21, 2011
I've got a netbook
Intel Pinetrail ATOM, 1.66GHz 667MHz FSB
NM 10 Express
Intel GMA3150 до 256 Мб
DDR2 667/800 2 ГБ
SATA 320 gb
and I'm trying to install Slackware 13.37 on it. I can boot from USB cdrom and start installation. On the first step I'm able to choose the kernel (hugesmp.s or huge.s) and no matter what I choose installation freezes and all I see is black screen.
The same story with Slackware 13.1, 13.0, Debian 6
View 9 Replies
View Related
