CentOS 5 :: Atheros AR5007 Set Failed On Wireless Device
Feb 20, 2011
My HP laptop has a wireless network device, Atheros AR5007 802.11 b/g Wifi adaptor. I was previously running Vista on this machine, and today loaded CentOS 5.5. In system-config-network, this device shows up properly in Hardware and in Devices. Hardware device shows the right mac address. In General, I set Activate device when computer starts, Automatically obtain IP address setting with dhcp, and Automatically obtain DNS information from provider. I've left the DNS and Hosts page blank.When I try to Activate the device, I get
"Error for wireless request "Set Mode" (8B06):
SET failed on device wlan0; Invalid argument
Determining IP information for wlan... failed."
I have tried nfs restart, to no avail. (When I do this restart, I get the usual OK on seven of the messages but Shutting Down NFS services " shows FAILED.) I know the wireless router is working because I am connecting to it from another machine.
Ubuntu recognize my wifi adapter which is Atheros AR5007, but when i open context menu to connect to wireless network it just simply shows me that wireless is disabled and even when i checked "Enable wireless" option nothing happened. Here is information from terminal:
Code: $ ifconfig ..... There is no any wireless device, only my wired network.
Code: $ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Wlan0 exists but Power Management is off.
Code: $ iwlist wlan0 scan wlan0 Failed to read scan data : Network is down
Code: $ sudo iwconfig wlan0 power on
Error for wireless request "Set Power Management" (8B2C) : SET failed on device wlan0 ; Operation not supported. Also I tried to install windows drivers with ndiswrapper but no any luck.
My system is up-to-date Ubuntu 11.04 Code: $ uname -a Linux linux 2.6.38-10-generic #46-Ubuntu SMP Tue Jun 28 15:05:41 UTC 2011 i686 athlon i386 GNU/Linux
installing my wireless card Atheros AR9285.I have tried to get it working with both compat wireless - Ath9k driver but I dont know exactly how to do.I have also tried to get it to work with ndiswrapper, but it is really tricky because nothing is available in centos like precompiled ndiswrapper.I used to work with Arch Linux so everything in Centos is totally new to me and I don�t understand a thing:I need to get it to work as soon as possible.What I have read the should go to just "activate" the ath9k driver with my card and it would work,
I have CentOS 5.5 and I can't install the driver for the Atheros AR5006X Wireless.The current state of my CentOS is:
*) If I run lspci, I get 03:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) (wrong model) *) If I go to System->Administration->Network, I see the wlan0 device with xlan0 name, but if I tried to active I get: (and the same when the system is rebooting)
Error for wireless request "Set Mode" (8B06):SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0...
I'm trying to find a driver for my wireless card (Atheros AR928X) and I think it's ath9k what I need. As far as I know there isn't a linux driver for it, so I installed ndiswrapper to use a windows driver instead. The problem is that when I type modprobe ndiswrapper I get "bash: modprobe: command not found" (even as root). I know I'm missing something about modprobe, but I can't find any help on google. Anyway, I installed ndisgtk next, because I thought it would be easier, but when I go to System> Administration> Windows Wireless Drivers I get a message "Unknown error".Do you have any ideas on how I'll make ndiswrapper work?
I have been working on this for a while now and am absolutely stumped. Basically, what i am attempting to do is make my ubuntu box into a gateway for my network. I have everything working thru hard wire, but I simply cant get the wireless to work. No matter what I do, I cannot get my wireless card to transmit an essid and allow nodes to connect. I have tried assigning it in the interfaces file (shown below), and I have also tried manually modifying it using the iwconfig command. Here is the topology:
eth1: internet WAN eth2: ethernet out to LAN ra0: wireless out to LAN Here is a copy of my /etc/network/interfaces file: [CODE] auto lo
I have a Acer Revo R3610 nettop on which I installed oS11.3. It has an Atheros AR5001 wireless network adaptor.I'm getting very bad latency and throughput on with this card. In comparison my Thinkpad with Intel card achieves at least 10 times the throughput from the same location. Also when I boot my wifi will come up authenticate and then a few seconds later disconnect and reconnect. I've tried updating the kernel to 2.6.35 as one of the fixes was to improve the performance of the ath5k driver. I'm using wpa2 authentication.
Is there anything else I paste that will help determine the cause of the bad throughput. Browsing the web or copying files across the network is bordering unusable.
I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
I have a desktop that has a d-link DWL-520 wireless card, which was working under Windoze. Today I installed Centos 5.4 on the system , which went cleanly. I then used Network Configuration to set up the wireless card. I specified to use DHCP, set the SSID and authentication password. When I tried to activate the card I get these error messages
Error for wireless request "Set Mode" (8B06): SET failed on device wlan0 ; Operation not supported. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0.
The hardware manager seems to have correctly identified the card and chipset, (Intersil Prism 2.5) and installed driver hostap_pci which came with the distro. This web site seems to suggest that this is the correct driver: [URL] searching forums I've found a few references to these errors, but they were from several years ago, and for different distros and cards. I did find a reference to using Network Manager to configure the card instead of Network Configuration. I started the NM service and configured a connection using it instead, but still no luck.
I have setup a dual boot machine which has OS of Windows Vista (32 Bit) / RHEL 5. The LAN Card details are - Atheros L2 Fast Ethernet 10/100 Base T - Controller. The said Network Card works fine with the ADSL Connection in Windows OS, but does not seem to initialise in Linux. When I run "ifconfig" in terminal window it gives away the prompt - "eth0 no such device exists".Although it shoes the loopback adapter (lo) device working fine. I forgot to mention over here, I have just started with Linux. So, I request "the" Linux Gurus to help me out with this one.
I have installed CentOS 5.3 on my PC which has an Atheros AR8121/8113/8114 Gigabit Ethernet. Unfortunately 5.3 has no drivers for this LAN Card. I searched the Google for drivers but was unable to find any. Does the 5.4 has them? If yes then how can i upgrade it to 5.4 without Network connectivity?
i have a centos 5 and i cant access to the LAN or Internet because , i cant create a network connection , i try to say My Ethernet dont appears,and i cant add any connections.i id thisTerminal:Quote:sudo iwconfig
I am using asus p5ld2-x/1333 motherboard,I installed the centos ,Centos saw other drivers but didn't see ethernet card.I am not connection the internet.
I just installed Centos 5.4 on the 2nd partion of my hard drive. I have an ethernet card in my machine (a 3Com Corporation 3c905 100BaseTX [Boomerang] card), but I need to be able to use my wireless USB device I bought from my local phone company (Qwest)...because I will not always have the luxury of plugging in to a hard-wired connection. The USB wireless device works fine in Windows, but I need to be able to use it on my newly installed Centos 5.4 partition.
I have a Dell Inspiron E4300 provided to me by my employer. I have installed CentOS 5 without much of a problem. The only issue is the wifi isn't working (doh!). I've had much experience with this kind of thing in the past (FreeBSD/ndiswrapper) with successes. Here are some details:
[Code]...
The device does not appear in dmesg :(I have installed ndiswrapper (dkms-ndiswrapper and ndisgtk from RPMForge) and provided it with the correct Windows XP driver. It has installed the driver and ndisgtk tells me that the hardware is present.
It worked on install but quit after the first system update. The "Enable Wireless" checkbox will not stay checked. I've attempted to manually install the madwifi driver to no avail.
Although Win7 is not bad either, I'm really happy using new Ubuntu Maverick Meerkat on my notebook. Since I've been using Linux (SimplyMepis, then Arch) on my desktop, I'm really happy that I found a Linux distro which suits me the best. BTW, I have a Toshiba T130-10g which I love for its long battery life. However, I would like to solve some issues/dilemmas/questions (and I searched for s the solutions of some of them on Google so please don't tell me to use it...)
1) How do I turn off Wifi completely in a comfortable way? I tried sudo iwconfig wlan0 txpower off but it threw: Error for wireless request "Set Tx Power" (8B26): SET failed on device wlan0 ; Operation not supported. I even edited something in interfaces configuration file, but it did nothing. Oh, I forgot, my notebook doesn't have a hardware switch to turn off wifi.
2) Setting brightness doesnt work for my laptop. I can set it by udo setpci -s 00:02.0 F4.B=25 but I'm looking for a more comfortable solution. BTW, editing one GRUB configuration file didn't help and ended in booting into command line (it was something with adding backlight=vendor or something like that...)
3) My touchpad is sometimes too sensitive and clicks somewhere sometimes when I don't want to it. How to make clicks less sensitive? I tried to play with some mouse settings but it didn't help much but perhaps I'm setting a bad parameter.
4) I remember that back in KDE 3.5 times a network manager icon had a setting to switch on net statistics so I could very easily see how much I downloaded every day. But, since KDE 3.5 is not supported anymore, I stopped using it in refusal to update to KDE 4.XX and switched to GNOME. Since for some months I'll have a limited download connection, is there something esay in GNOME to watch my net statistics that wouldn't be deleted after reboot/shutdown?...
I'm new to the linux community -started using Slax as of this morning. I'm having trouble getting wireless set up for my Atheros AR9287, I found that Compat Wireless should get the thing to start working.
Problem is I have no idea what I'm doing setting it up. Can anyone explain this to a total novice? Or have anything else that will get it to work?
i have a dell duo and i am wanting to install ubuntu Q. there is no LAN connection what is the "best" way to get the atheros wireless working.i have looked around for a driver to downlod found several that appear as they would work i just don't know which would be the best or the best way to download and install it?
I spent days trying to figure out how to get my atheros AR928x 802.11n wireless card to work in Ubuntu. The card worked perfect in Windows 7 but the connection kept dropping in Ubuntu. It would find my router and connect with 60% signal for about 5 seconds, then fall down to about 25% signal and then cut out altogether. After searching for days to find a solution, I finally figured it out and figured Id post it here to let everyone else in the same boat have a working wireless too!
I found this solution from:[URL].. This solution is for JAUNTY (Ubuntu 9.04), so if you are running Jaunty, you can just follow that post. If you are using Karmic (Ubuntu 9.1), you can follow this tutorial I'm posting. It's pretty simple: First, make sure you got all your files up to date. Type in a terminal:
sudo apt-get update Let that run, and once its done, type into terminal: sudo apt-get upgrade Once that finished, restart your computer. Again open up terminal and type: sudo apt-get install linux-backports-modules-karmic
If you are using Jaunty, instead of karmic type in jaunty, if you use another version of ubuntu, you can find a list of versions and their names here:[URL].. Restart your computer one more time, and you should be good to go! This has been tested and confirmed to work on: -Ubuntu 9.1(karmic) with an Atheros 928x 802.11n wireless card, using the Ubuntu installed network software, in a Gateway NV53 laptop connected to a belkin 802.11n wireless router.-HP base station / 802.11g airport express
This has been tested and does not work/has issues with:
-airport extreme I hope this works for you too, and if it does, please let me know with your hardware and Ubuntu version so I can post here what other setups have been confirmed to let this work.
I am using Ubuntu 8.04 and when I open up my network settings, It shows my ethernet card and my modem but my wireless card doesn't show up. Under "Hardware Drivers" it says that my driver for my wireless card is a "proprietary driver" and that there is no driver I can get for it for Linux. Is there any way that I can get my wireless card to work? I tried going to the HP website and downloading a driver for it, but all of the drivers only work for Windows....
I'm facing problems with Fedora13 and the AR9285 wifi card... the connection is just too slow, and the wired connection works fine. I just figured out that a lot of VAIO users (so am I) were in the same situation, and solved their problem by downloading ath9k drivers from linuxwireless.org. Fine, I did it! That's what I found :
Quote:
Building and installing cd /path/to/compat-wireless-2.6.32-rc5 ./scripts/driver-select <driver-name> make sudo make install
...but make is looking for source files in /usr/src/kernels/2.6.34-7-61.fc13.x86_64/build/ , which doesn't exist! The /usr/src/kernels/ folder is just empty. I also found something about the fact that Fedora13 didn't came with kernel's source files... So how can I install that driver? (I didn't find the package via yum...)
I'm in the process of switching back to Fedora after years of hiatus, but I can't get my wireless card working. The card itself is an Atheros AR2413, and the problem is that it seems to appear OK in various places, BUT it doesn't detect any networks. I'm on Fedora 14.
I just installed OpenSuSE 11.3 x86_64, and as I'm new to OpenSuSE I can't get my wireless to work. I believe it should work because it worked out of the box in Ubuntu (9.10 and 10.04)
At first I didn't see any network icon in the notification area, but after some googling figured out to enable NetworkManager instead of ifup. Now there is an icon, and clicking it I can see wireless networks, but when I try to connect it tries for a while, then seems to give up.
I can't get my wireless into monitor mode. I;m running ubuntu 9.1 karmic It connects fine to wireless networks. But when i do: sudo iwconfig wlan0 mode monitor. I get: Error for wireless request "Set Mode" (8B06) :SET failed on device wlan0 ; Device or resource busy. I can only see wlan0 (wmaster0, eth0), not ath0 or wifi0 mentioned elsewhere, in wireshark. I only see my own ip and packets coming to and from that. my system tells me i have an atheros ar9285 chipset in place.
I bought this new computer with an Atheros AR9285 wireless adapter, signal dropped out after a couple of minutes, sometimes reconnected, I looked up different posts on [URL] and [URL].
First I installed linux-backports and linux-backports-wireless, still dropped. Then I installed compat-wireless-2.6.33 and it still dropped. Finalley I blacklisted the driver with gksu gedit /etc/modprobe.d/blacklist-ath_pci.conf and it still drops. What should I do, it seems to pick it up again after 30 sec or so, but it a bit frustrating.
P.S.: It seems to be getting much better now that I have the torrent program shut down.
