CentOS 5 Hardware :: Dell Latitude E4300 & Broadcom 4322 Wireless Device Does Not Appear In Dmesg
Jun 11, 2009
I have a Dell Inspiron E4300 provided to me by my employer. I have installed CentOS 5 without much of a problem. The only issue is the wifi isn't working (doh!). I've had much experience with this kind of thing in the past (FreeBSD/ndiswrapper) with successes.
Here are some details:
[Code]...
The device does not appear in dmesg :(I have installed ndiswrapper (dkms-ndiswrapper and ndisgtk from RPMForge) and provided it with the correct Windows XP driver. It has installed the driver and ndisgtk tells me that the hardware is present.
[Code]....
View 4 Replies
ADVERTISEMENT
Jun 13, 2010
I was praying a standard install of Ubuntu 10.04 would work out of the gate and I was wrong:- Looks like everything is working except for my wireless adapter, Dell E4300
@nix-laptop:~$ lspci | grep "Wireless"
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
@nix-laptop:~$ lsusb | grep "Wireless"
@nix-laptop:~$ lspci -nn | grep "Wireless"
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01)
[Code]...
View 3 Replies
View Related
Feb 7, 2010
I have just installed Slackware 13 on my Dell but the BT LED is not lighted when I start machine.
I run:
# hciconfig -a
But no result returns
I search many times about this problem but seem not find any solution.
View 14 Replies
View Related
Aug 6, 2011
I am a newbie in rpm files, I am testing Fedora 15 (gnome3),nd I liked it, congratulations to Fedora Team, I was using Linux mint9, and I have a certainly experience with .deb files and APT, but .rpm and YUM, I am a little lost...I have a HP Pavilion dv2-1110us laptop with a Broadcom BCM 4322 wireless card; the netwokmannager said "wireless firmware missing"How can I install it?There is in the Fedora repositories?
View 5 Replies
View Related
May 8, 2011
I have a broadcom 4322 and haven't successfully got it working yet. the hard drive failed in this laptop and i took it out. i am using a bootable flash drive with ubuntu on it installed. not the live edition. i am trying to find out if somehow since the hard drive is not in the laptop, if that could have anything to do with runnin off the usb flash drive it boots? i have a wired connection using the 8gb flash drive. since there are drivers for usb wifi devices which i know are different, is it possible that the wifi card is looking somewhere else instead of the usb port?
lsusb (i know i have a flash drive not a wifi usb card but this commands still shows this and ndiswrapper -l doesn't show nothing but blank next line to type on. i have tried alot of stuff
network DISABLED
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
[Code]...
View 6 Replies
View Related
Jan 11, 2010
I have recently installed Ubuntu 9.10 but am unable to connect to any of the wireless networks. Network manager does not shows any of the available wireless networks and upon clicking the network connection icon, under Wireless networks category it shows "Device not ready".Following are the results of some of the commands :
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
[code]....
View 8 Replies
View Related
Mar 23, 2011
I've recently partitioned off a section of my hard drive to run Ubuntu from and I'm having trouble with the network connections. In my device manager of Windows 7, it lists that my network adapters are
1. DW1520 Wireless-N WLAN Half-Mini Card
2. Intel(R) 82577LM Gigabit Network Connection
Is there something I'm not doing right in order to allow me to connect to a wireless connection? Are these devices even enabled in Linux systems?
View 6 Replies
View Related
Jan 26, 2011
I am running the latest version of arch linux on a Dell Latitude D420. So far everything has worked perfectly except the wireless. It seems that Arch does not even detect the wireless because ifconfig -a only gives me the loopback and eth0. I installed ndiswrapper as well as the drivers. lsmod | grep ndiswrapper shows that ndiswrapper is being loaded on boot. I tried to install the iwp3945 drivers, but they have become obsolete so pacman was unable to find them. I also tried installing the iwl3945 drivers as explained here [URL] but still no luck.
View 14 Replies
View Related
Mar 18, 2011
I have a 10 year old Dell Latitude CPx that has no ethernet or modem ports, and the only way to connect to the internet is the Dynex Wireless G DX-BNBC PCMCIA card. It came with Windows 98, and I put Xubuntu on it for a while. I believe it was Xubuntu 8 or 9. Back then I had no clue what to do whatsoever, so after a couple weeks removed it and put Windows 2000 on it. It worked, I used it for a while, but it was slow and 2000 took up a lot of space on the 12gb hard drive after all the updates. I left it forgotten and gathering dust for the past year.
Then a few days ago I discovered Lubuntu 10.10, and from what I've seen so far it is definitely a lot more compact and faster than 2000. However, the wireless card still won't work. It's somewhat recognized, because whenever I unplug it and plug it in a bubble pops up saying "you've been disconnected from the network"... which is odd, since it never says I'm connected, and says that the firmware is missing for this card. Anyway, I discovered something this time. By running "lspci -nn | grep -i 14e4":
[Code]....
View 1 Replies
View Related
Nov 9, 2010
I have a Dell Latitude E6500 running Opensuse 11.3. As far as I can tell the module for my wireless card is loaded correctly and it's working:
Code:
sudo lspci | grep -i wifi
0c:00.0 Network controller: Intel Corporation WiFi Link 5100
Code:
[ 556.642557] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 556.642560] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[Code].....
The funny thing is that it works fine in a Fedora installation, which has an older kernel and older drivers, on the same laptop. The fact that the indicator light doesn't come in when the physical switch is turned on suggests it's something to do with that switch.
View 6 Replies
View Related
Jun 9, 2009
I just installed CentOS 5.2 on a Dell Studio XPS 435 MT, which is a fairly new machine (Intel Core i7) and I'm having trouble getting networking working. The word "network" doesn't appear anywhere in the dmesg output, so I can't even tell what hardware my machine has, or what drivers are missing. How do I tackle this?
View 4 Replies
View Related
Jan 20, 2010
Broadcom BCM4306KFB will not connect to internet.how do I download the firmware? I entered the following on the terminal:sudo/usr/sbin/install_bcm43xx_firmware...File does not exist....any ideas?I am running openSuSe 11.1
View 3 Replies
View Related
Jan 2, 2011
I have a DEll Mini 9 - it has worked fine even though it has a limited memory. But Husband only uses to have a surf. It now wont connect to net. The Broadcom4312 Wireless Card is not working on Obunto. It has a Dell 802.11b/g Wireless LAN Mini card installed and Obunto Edition Version 8.04 Have phoned Dell and after several calls on Hold for over 15 mins each time and getting nowhere fast i am coming to you guys/girls. I am not a very good comp person, but i do get by and i am trying, so be gentle with me. in simplistic terms.
View 2 Replies
View Related
Mar 31, 2011
I just got a new laptop...Dell Vostro 3500. Took off Win put on Ubuntu...all went fine. I did all updates and app downloads using my WIRED NETWORK as wireless wasnt working. However I was more interested in setting up the new computer. Anyway so after all is installed up pops "Broadcom STA Wireless driver" Proprietary driver do you want to install. Obviously I said yes...
Well now My wireless is working great but for some reason my Wired (auto eth0) no longer works. It just says disconnected and its grayed in. I'm pretty much a newbie but did try a few things like:
apt-get update
apt-get "something" essential (thats not a command just from memory it was something like that)
However I've had no luck. This Broadcom driver seems to have knocked out my wired network.
View 4 Replies
View Related
Dec 25, 2009
My wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:
[Code]...
I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.
View 7 Replies
View Related
Jan 20, 2011
I have installed CentOS 5 just downloaded yesterday on a Dell D620. Everything but the wireless card works. So I found this article:
http://wiki.centos.org/HowTos/Laptops/Wireless/Broadcom
and followed it step by step and was able to complete all of the tasks. The problem is that obviously it still won't start. It is not even recognized as an adapter but when I run lspci -v it is there sure enough. When I look under the networking GUI it is listed there but it has no MAC assigned to it. Please let me know what command output you need to see and I'll get here asap. I have searched this forum and other sites and nothing so far has worked.
View 1 Replies
View Related
Jul 16, 2010
Im having problems making my wireless card "Broadcom 4312" work on centos 5.4 X64 , i have installed and built the driver from their official site and inserted its module successfully, but whenever i try to avtivate the interface "called eth1" i get the following
Error for wireless request "Set Encode" (8B2A) :
SET failed on device eth1 ; Invalid argument.
Error for wireless request "Set Encode" (8B2A) :
SET failed on device eth1 ; Invalid argument.
View 2 Replies
View Related
Jun 10, 2010
I recently installed Ubuntu x64 on my dell studio 1535 using the windows installer (wubi).
All seems to be working fine apart from the built in wireless card, the proprietary driver (found in hardware drivers) installs and activates successfully and works perfectly. Until I shut down or restart the system. On the next boot the wireless card is 'disabled' and no longer works.
The card I have is a Broadcom Corporation BCM4312 802.11b/g
I am going to try a proper install on a second partition rather than using wubi later on but wondered if this was a commonly occuring problem?
The wireless card works as soon as the driver installs, however I am shown a "restart to activate driver" message and after restarting it's dead.
View 5 Replies
View Related
Nov 13, 2009
Newbie here, but I'll attempt to display all the information requested in lwfinger's sticky:
/sbin/lspci yields:
Code:
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN
[code]...
View 9 Replies
View Related
Nov 12, 2009
I'd really like to start using Linux, but I don't know much about it. I tried installing Mandriva One 2010, but it apparently isn't compatible with my laptop. Does anybody know what would be a good distribution to use with an old Dell Latitude CPx? I'd like to get a free bootable CD one for starters, if possible. I mainly would like to use it for surfing the Web.
View 9 Replies
View Related
Mar 10, 2010
New to GNU/Linux community. Have Dell Latitude C800 I picked up for $5.00 @ garage sale. Windows XP currently installed works fine, but looking for optimal Linux OS for this unit. Tried installing SUSE 11.2, Gentoo, Freespire, Debian, Vector, Knoppix & Ubuntu w/o satisfactory results. Any suggestions from you good folks w/experience? I understand Slackware might do the trick, but remember I'm a newbie. :-)
View 5 Replies
View Related
Jun 2, 2010
After someone messed up the computer by putting XP half ass on it, it was built for windows 98 se. Now that i am working with an unformated hard drive. It doesn't like Ubuntu, Kubuntu, Windows NT, so I need to start somewhere and I need the answer fast, so i need to know what is the best linux distro for it. it is a Dell Latitide CPT c.
View 8 Replies
View Related
Jul 29, 2010
I just received my brand new E6410 laptop, which have i5 processor and wish to install ubuntu 10.04 on it.
I am wondering which should I choose: 32-bit or 64-bit?
View 4 Replies
View Related
Jun 19, 2011
I resued a Dell Latitude CPi D300XT that was getting tossed and have XP on it running a little slow but decent for basic web surfing. I saw a ..... video of someone that had Ubuntu Minimal with LXDE running on it. I could not find that but tryed Puppy Linux, Damn Small Linux, and Ubuntu 9 to 11.04 CD's in it and could not get them to to boot into the CD. I even just set the Dell to only boot from CD/DVD and would not boot any of them.
Does anyone know which Ubuntu or Linux distro I could try on a Dell Latitude CPi D300XT? The specs are Intel Pentium II 300 MHz, 256MB of RAM and 20 Gig Hard Drive.
View 5 Replies
View Related
Jul 5, 2010
refer to this and let me know if I can get this working
[URL}
View 2 Replies
View Related
Oct 8, 2010
I would like recommendations for a USB wireless device to get Internet on a Dell Dimension 2400. It is an old computer but, Ubuntu 10.4 is running like a really fast steam train - like nothing will stop it. Hooray for Ubuntu - XP has been dumped from this machine when I inherited it as it was becoming bloated and inevitably slow (not that I wanted to keep it any way). So I only need a good easy to install wireless USB device for Internet connection. I bought a Realtek RT2070 chipset device without reading into the dos and don'ts. My own fault really as I have been spoilt with everything 'just working' with my laptop and Ultimate Edition Linux.
I have tried a few different driver versions for this thing and it simply won't see the device properly. I can get a @Connection Established' message with a couple of the drivers but, I never actually get connected. I have tried the Windows Wireless Drivers and although they all install I get the 'No Hardware Detected' next to the driver name every time. Something definitely not working somewhere.
So I am giving up with this one and hoping I can find one that people know works well and easily installed. Preferrably with a .deb file (asking a bit much I know but, in this day and age I expect it). After all the other Operating Systems have their own executables that work for all installations of everything. Oh, how I wish I had the time and know-how to do this for all peripherals for Linux. It would be like being in seventh heaven for everyone. No more compiling, or make commands just download and install...
I was amazed to see four simultaneous video feeds running in VideoLan the other day through Ultimate Edition on a Dell Studio 1537. I think I could have just kept opening and running the videos. They had no dropped frames at all - amazing when I considered the same day what crap Windows 7 was to stutter trying to play a CD with music.
View 5 Replies
View Related
Oct 22, 2010
we have a laptop (dell latitude xt) on our company, and we would like to install ubuntu on it. windows 7 works fine out of the box, so the hardware is fine.since this laptop has a touchscreen we just installed ubuntu 10.10 netbook edition 32x.But, we do not manage to enable the touchscreen, neither the vga graphic drivers.
View 1 Replies
View Related
Feb 23, 2010
this is my first post sorry if im not clear OK i downloaded Ubuntu 9.1 32bit burned it to a CD and popped it in my dell latitude c600 i was going to set it up to dual boot with xp i already have 2 partions so every thing was ready
i hit install and saw a Ubuntu symbol fading in and out after that i got a whole heap of i/o errors ranging from 350 to 500 for the first number, then a bit later it loaded up the busy cursor for Ubuntu on a black screen it then changed to a cross outline and no matter how long i let i go for i do not change at all off that the disc isn't the problem because it works on my desk top live and install
View 2 Replies
View Related
Apr 22, 2010
I have recently installed Ubuntu 9.10 in my Dell Latitude E6400. Everything works great except that I cannot disable the built in microphone. I have even disabled from the BIOS but the mic continues working, this is really annoying as I do lots of calling from this computer for my work.
I have played around with the alsamixer and the sound preferences but I haven't been able to disable it or at least lower its volume.
My headset is plugged in to the mic jack and it works fine. The problem is that both the headset and the internal mic are working at the same time.
View 3 Replies
View Related
Aug 13, 2010
The disc is fine I have installed using the CD on an Acer Laptop without any trouble what so ever. However now I need to install it on a Dell Latitude D505.It was detected and started the disc and show Ubuntu with the five dots loading screen. And then it goes black, with the laptop on. The menu with options like Install, defect test etc. can't be seen.In response to this I installed it inside Windows and that seemed to be ok, so I restarted the laptop and selected Ubuntu from the boot menu and does the dot loading screen and then black.I have searched Google and it is just threads that end up dead.
View 9 Replies
View Related
