Applications :: Firefox Slower Compiling Data Than In Vista
Oct 2, 2010
I've been trying to make Linux my only OS and have run into another snag - this time with Firefox. I realize I could try Opera or Chrome but for this thread I'm concerned with Firefox.I still dual-boot and while I've always notice that Firefox doesn't scroll as smoothly as it does in Vista, this latest issue is a concern:
I'm on the BOD for a different club forum (hobby) and need to print a list of the new registrants for various reasons. Firefox initially presents the list in portrait mode but I need it to be in landscape. Generating the initial "print preview" then changing the "print preview" from portrait to landscape takes substantially longer than in Vista on the same box...it's 30-40 seconds in Vista and nearly 2 minutes in Linux - that's a huge difference!!
As I mentioned it's a dual boot so the hardware is the same and it shouldn't involve the HPLIP service as it's a preview.I don't know if this is an openSuse issue, Kernel issue or something else.
View 1 Replies
ADVERTISEMENT
Jan 9, 2010
I have a 100MBit connection and previously when I used vista I had no problem downloading files at 100Mbit with my vpn provider. Hower the PPTP vpn connecion I'm using on ubuntu seems to be capped to 10 MBit.
View 1 Replies
View Related
Nov 25, 2010
I have a FC13 box that has both Gnome and KDE sessions installed.
I have noticed on the KDE session that data transfer rates are slower than when I use Gnome.
In Gnome, I can transfer files between my FC13 machine and my Ubuntu 10.04 pc at a rate of 6.5 MB/s (52 Mb/s if my maths is correct), but in KDE the rate is only 3.5 MB/s (28 Mb/s).
"ethtool eth0" shows my NIC speed as 100 Mb/s. Obviously I am not hitting anywhere near that speed in either session, (a separate article may be happen in the future to address that), but I am curious as to why KDE is that much slower for file transfer.
View 3 Replies
View Related
Jul 1, 2010
ANyone here tried firefox 3.7a5 and/or 4beta? I'd be interested in finding out everyone's experience because I found that when I ran the below web test, 3.7 got 60fps and 4b got about 22 fps! Flying Images You can find 4 here: Index of /pub/mozilla.org/firefox/nightly/latest-trunk And 3.7 here: Index of /pub/mozilla.org/firefox/nightly/3.7a5-candidates/build1
View 1 Replies
View Related
Jun 17, 2011
Just installed the latest 11.04 64bit ubuntu, using std cd install alongside windows7, ticking the "add all extras" option, to ensure I got all the latest drivers etc.. The pc is brand new
Acer emachines E644 - AMD 2 Core C-50
3Gb DDR3 mem
500 Gb hard drive
Pre-installed: 64bit Win 7 home premium I've literally changed nothing in win7 other than using wubi to install ubuntu 1st time around (ubuntu appears as a win program - and was un-installed as such). Note: It is too late to now check, but......... under wubi/win7 I had no sense that the browser firefox was running slow - i didn't do a speedtest.net cos of other priorities (and it seemed fine). On advice, I started again (new partitions etc). The Problem: Ubuntu is now 25% slower (broadband) than Win7! Actually, it feels worse than that - more like it was on my previous lap top that had 512Mb ram running xp. Here are the results after switching os's a couple of times.
[Code]....
Firefox managed one spurious result of 5.89, but the graph (on the speedtest display) was absolutely all over the shop (like it's overall results). Compare that to iExplorer - total stability, and in fact, more like 30% faster + a much better ping. Anyway, I guess you know all this, I've seen that plenty of others have noticed this speed drop in the past, so:
View 9 Replies
View Related
Aug 28, 2010
Just read a post on this page (scroll down about half way) and it seems like all mozilla based browsers are still slower in linux vs wine and/or windows! [URL]...I thought after almost two years this would've been fixed (there's been earlier reports besides the link I gave above). Heck I thought it would be a problem with a specific version release and/or releases? I think this is a bit ridiculous after this long and I'm almost wondering if it's been around longer than 2 years when anyone even cared to take notice! Oh and did I already mention that compiling it doesn't make a difference? You probly knew that already. I'm running bleeding edge Gentoo with window maker (march=prescott sse sse2 sse3 mmx mmxext blah use flags and cflags) and Slackware 13.1 (alot of stuff compiled and/or recompiled from source-optimized with same flags as gentoo and even more flags (and less package features) when things are stable and ok. Yes compiling is pain on a overclocked Celeron D lol. Well not too painful
Thanks to google-chromium and/or chrome we don't have to worry about speed issues but come-on this is almost sick! Firefox windows via wine way faster than a native linux build? WTF... That's like almost embarrassing. Has anyone found anything to resolve this issue. Perhaps it's a simple yet overlooked setting that no one bothers with?
To that link above one of the posters mentioned it's the DNS cache setting that fixes the speed issue, but then others posted back saying it doesn't resolve this issue so obviously that's not the case. There's definately a flaw with the mozilla code under linux since even epiphany (which is very lightweight in comparison to regular firefox) suffers performance issues as well as others.
It's a bit upsetting I.M.O. (in my opinion! lolz) that this issue isn't resolved yet after all this time? I mean common. What about people who have no choice but to use Firefox. I have to use firefox by force when I play QuakeLive! (the plugin is not made for any other linux browser).
Even besides that point. Mozilla was made in the first place to be light weight, fast and secure vs internet explorer. It has severely changed since then (remember when it was the only tabbed browser available? It was sweet back then!). Now it just seems bloated and awful. Thankfully not terribly awful on Windows but compared to Google-Chrome (especially Safari which is MacOS only but still) it gets smoked in terms of speed, memory use and simplicity. At least not as bad as Internet Explorer (lol @ internet explorer. OMG the slowzyynessz and heeuuchggeneesszz).
So yeah being an open source browser and running terribly on an open source O.S. vs a closed source one. What's gonna' happen? Has this already been mentioned and fixed somewhere that I never looked or is it completely hopeless and just better not to use it for those of us that are bothered by it.
View 4 Replies
View Related
Sep 22, 2010
OpenSuse 11.2
LXDE (Latest version)
It used to have a lightening speed. But now every application is taking few seconds to start, even on Konsole, the commands take some seconds to get typed ! (I literally have to wait for cursor to move and commands to get typed on Konsole). Folders are taking some seconds to get opened !
I rebooted the computer but that proved to be useless.
Here the ps output:
Code:
anisha@linux-uitj:~> pstree -Apuh `id -anisha`
id: invalid option -- 'i'
Try `id --help' for more information.
init(1)-+-acpid(1054)
[Code].....
View 1 Replies
View Related
Nov 16, 2009
Recently I have installed Fedora 10. It comes with firefox 3.xx by default. Now I was wondering if there is any way through which i can update it to 3.5 version though yum. I have tried yum update firefox but it did not work and returns following messages Loaded plugins: refresh-packagekit Setting up Update Process No Packages marked for Update I know that one way to update is download the latest Tar package and use it, but I want to totally remove my previous installation and use solely one package i.e. firefox 3.5.
View 6 Replies
View Related
Jan 18, 2010
I use CloneZilla to image partitions and Grub 0.97 in the MBR to boot the os restored in /sda1.
Although it works fine with XP, I can't get Vista or Windows7 to boot. For instance, Vista fails with error 0xc00000e and is unable to load WINLOAD.EXE.
I don't know if it's something in Windows or maybe Grub needs something else besides the following in menu.lst to be able to load Vista and W7?
Code: parttype (hd0,0) 0x7
rootnoverify (hd0,0)
makeactive
chainloader +1
View 5 Replies
View Related
Aug 7, 2010
Im experiencing a strange problem with 10.04. When it first boots up its reasonably quick (as snappy as Gnome ever has been) but after its been running for a day or two it gets ununsably slow and has to be rebooted.
I dont see how it can be anything to do with my hardware as it runs OK when first started. Ive monitored RAM usage and it doesnt seem to differ much. There's always the same amount unused.
View 2 Replies
View Related
Apr 14, 2010
I have installed also Vista on my PC, but "Documents and Settings" f.e. is void if I mount the Vista partition. In this case its not very important. But a week ago i'd run a XP-Laptop with 9.04 live-CD for backup. That worked fine (The XP was very damaged). I put the 40GB data on my PC through the WLAN during one night without any aid else. All the XP files are well accessible. And I put it back later on a fresh XP.But what would have happen with a Vista-Laptop? Anyone an idea how to reach all Vista or 7 files with a live CD? Or at least from my installed 8.04 to installed Vista.
I think it works alternatively from Win7 running using a USB hard drive adapter if you change the rights on Vista or 7 on the connected hard drive. Not tested.
View 2 Replies
View Related
Apr 25, 2010
I am trying to transfer files from a SATA hard drive with Windows Vista (Home Premium) installed on it. Some files I can easily copy over, others just say Access Denied.
I'm sure permissions is part of the issue, unofrtunately Windows is unable to boot at all (surpise surprise) so I can't adjust anything from within in. I know with XP drives I can easily copy and paste onto my Ubuntu machine. I'm using a SATA to USB converter that let's me plug it in and my desktop reads it like an external hard drive.
I've gone into the properties and under permissions it shows my account as having access to Create and delete files under folder access amd "---" under File access. My group and others show None and --- for Folder and File access. I can post a link to a screenshot tomorrow. I've tried to also select Read and Write for File access but it goes back to the dashes before I can apply it.
I am running 64 bit Ubuntu 9.10 and do not have the sharing aspect installed. Any questions please feel free to ask me.
View 6 Replies
View Related
Jun 8, 2010
I've installed wubi on my D: partition of a vista os. Vista is installed on the C: I can see the vista partition if I mount it but can only see the wubi 10.04 system files on the data partition (D: ). No option to mount it either. Also curious to know if its possible to automatically mount the c: on startup.
View 3 Replies
View Related
May 27, 2011
I'm trying to help out a Windows Vista user by rescuing their data from a failing hard disk. When their laptop stopped booting, I immediately pulled the disk to get as much as I could off of it using another Windows box, but the process took days and ultimately choked on multiple bad sectors and stopped responding. I then hooked it up to my Ubuntu box via a USB disk dock and ran a ddrescue on the Windows partition. The operation took a week, then seemed to get stuck for another week on the "splitting failed blocks" phase. So I have an dd image and a log to go back to, but when I resume that process it still seems to use the disk and I don't see much progress.
I then tried a plain `dd` on the disk with `conv=noerror,sync` options, and that has been running for a few days now, but with input/ouput error messages every few seconds and seemingly no records going in or out. I think that's a bad sign.What's the best, and fastest, way to get the most data off the disk as possible and into an image file, and then perform any necessary operations on the image file so that the disk is no longer needed (since it seems to be just about dead)? Er, just realized I'd put "Windows 7" in the post title, but this is a Vista partition, and I can't change the title. They're pretty similar, with one OS being much less useful than the other, but I thought I'd better acknowledge my mistake.
View 14 Replies
View Related
Apr 20, 2011
1. Maverick Meerkat 10.10
2. Vista Ultimate
I'm successfully connecting to my Vista desktop via my laptop running MM;I can view my shares but not all my data. All top level shares seem to be visible, it's when I go deeper that I notice not everything is showing up. The folders are accessible if I type the full path, and then again I have the same issue once I'm inside that folder where not all data is visible.
In Nautilus setting: Edit>Pref>Preview Tab.I set preview for all files under 4GB which is the upper limit I can set.This made more files visible but not everything.I attempted to divide the directories in order to halve the size of the folders, this helped but not completely. The directories contain movie and picture files. The picture files are easier to divide more equitably between folders, but the movies being so large, managing folders sizes in that way doesn't help. I really don't want to divide my files according to this problem anyway. Sorting does not affect which folders and files are shown. Nothing is hidden, options to show hidden files on amd off, no help.
View 5 Replies
View Related
Feb 7, 2009
I just started using linux (newb) on a dual boot with windows VISTA. I need to disable data prevention execution whenever I do boot Vista through GRUB but I don't know what command to use nor exactly where to put the command.On a single boot windows machine, all you would do is type the following at the command prompt and reboot: bcdedit.exe /set {current} nx AlwaysOffAlso, GRUB lists my VISTA boot option simply as "other." Is there a way to change that?
View 3 Replies
View Related
Jan 22, 2011
I just downloaded Eclipse, and it is packaged as a compressed file. Within is a folder with the application plus configuration and any plugins et cetera. Should I simply put this in my /usr/bin folder? Is the bin path recursive, so that it will execute eclipse/eclipse when I simply write eclipse? All other files in there are simply that - single binaries, and no config-files or such.
Another possibility that occured to me is place the application in a separate folder, create a bash script that simply starts the application in the bin folder. But what folder would be good? I don't really want to contaminate my home folder with machine-wide applications...You might call me pedantic, but that is because I am. I just want to know what the "convention" is so to speak.
View 2 Replies
View Related
May 3, 2010
I have written an application which has more than 6 threads.Two threads share a common linked list. Out of two threads one thread reads the linked list node and other thread writes to linked list node.I am using pthread_mutex_lock() API to achieve synchronisation between having access to common linked list. The problem is the first thread which reads the linked list accesses the mutex faster making other thread to starve.
I want both the thread to have an access to mutex. It should not happen that always first thread locks, releases and relocks it. The first thread almost require to access the link list every 5 msec which is causing second thread not to gain the mutex.How should I fix this? For information, I am running this application on PXA270 ARM platform.
View 4 Replies
View Related
Feb 7, 2011
What I want to do is force my DVD burner to use full writing power on the entire surface of a DVD. This should be able to invisibly damage the contained data, and should work on CDs, DVDs and BRDs too (in theory). I don't want to write data over it, so it's not a matter of having a RW disc or a R one. The result I want to obtain is simply an unreadable disc that does not look damaged. Do you know if there's a program able to ignore a disc being already full and perform this task?
View 2 Replies
View Related
Oct 12, 2010
I have searched and searched for answers to this question, but I can't find what I'm searching for anywhere. At least with the search terms I'm using.So, my question is, is there a backup software for Linux that backs up not only a user's home folder, etc, but also the user's applications, and its associated data.
I am about to upgrade my mother's computer to Lucid, but I don't want to do that until I can find a backup solution that will ensure she doesn't lose any of her application data. She has a lot of apps on her netbook, so just finding out where each individual app stores its data and backing it up is kind of out of the question. Unless every app that the end-user uses (that isn't run as root, obviously) stores its data in the home folder, then it would be easier.Honestly, I use a Mac and I guess I'm just used to the simplicity of Time Machine, which certainly backs up applications, application data, user data, and even extra executables in all the /bin folders (which Macs don't typically use to store most applications). I've heard TimeVault is like Time Machine, but when I tried to use it on her computer, it wouldn't work because it wasn't compatible with the version of Ubuntu that was (and still is) on her computer.
View 6 Replies
View Related
Oct 5, 2010
I can not run GWT applications in Firefox; it say me that GWT plugin is needed; I download and install the plugin through Firefox plugin manager, but when it restart, ask me for pluging, again. What i can do?
View 2 Replies
View Related
Sep 6, 2010
Is anyone else having problems with Firefox Ver 3.6.8? Lately for no particular reason it just stops, goes all gray and when I look at the process Firefox-bin is running at 100% or more. Occasionally it only lasts a few seconds but often and can even bring the whole machine down requiring a reset to recover. Sometimes it opens, starts loading Gmail and locks up so it's not a particular site causing the problem. I tried the "report a problem" but it was so frustratingly slow that I gave up. I'm running Ubuntu 10.04 kernel 2.6.32-24 GNOME 2.30.2 on a Core2 with 2G RAM.This is only a recent occurrence but it has forced me to use Chrome till I can fix it.
View 5 Replies
View Related
Jan 19, 2010
I need to install firefox 3 in my RHEL5. But i am not finding it anywhere in the website.
View 3 Replies
View Related
Feb 5, 2010
Firefox 3.6 won't print with cups.
I'v found on this ore other forum a sollution But is there a better one.
I must add the line
But hen i can only print to the default printer.
Then i have to do lpoptions -d printername to set the other printer default.
it is good for now but looking fort better solution.
View 5 Replies
View Related
Oct 3, 2010
Ever since I first installed OpenSuSE 11.2 on my pc firefox has been randomly redirecting me to weird web pages. It doesn't matter what website I try to visit whether it be this one or ..... or even my clan website, often times I will somehow randomly get redirected, sometimes before the page even fully loads. If I try to click the back button it just redirects me again and the only way I found to make it stop is to either X off the tab and then bring up a new one or go to another website and then go back to the one i wanted.
The majority of times it redirects me to what is likely either the worst advertisement for an antivirus program I have ever seen in my life, or the worst attempt at trying to convince people to download a virus I have ever seen in my life. In the tab it will come up with what is supposed to be the my computer folder and starts scanning various directories and detecting viruses (I wouldn't fall for this even If i was using windows). I don't know what happens after that I usually X it off.If anyone has any ideas about what could possibly causing this, or needs more information I would be grateful and happy to oblige.One last thing, firefox seems to be crashing ALL the time, not sure if this might be linked but it is really annoying.
View 9 Replies
View Related
Jul 14, 2010
I am using Firefox/3.6.3 ,My firefox crashes frequently , I use to reinstall evertime.
Proble.
When I start firefox brower it won't start ,when I start using command line then it will show below message, Can anyone suggest me wat is the causing firefox and how to rectify it. code...
View 7 Replies
View Related
Aug 28, 2010
Linux - Ubuntu 10.4 LTS
Firefox 3.6.8 Canonical v1.0
First off, I have been having disk error problems with Ubuntu, and I think that a file that involves the bookmarks was corrupted. I did remove and reinstall the latest firefox package with Synaptic and apt-get (they do the same thing right?) But I still have this problem: I can not add or modify my bookmarks in the toolbar. I can go to the window to organize my bookmarks but its like nothing is there on the left main view box or the right that shows the bookmarks. If I try to import or restore, it does nothing.
View 1 Replies
View Related
Dec 21, 2010
how to create or modify Ff themes for Linux. From what i gather you just have to edit CSS or HTML files.I have searched Mozilla and they have next to nothing.
View 3 Replies
View Related
Feb 7, 2011
i hv installed firefox 3.6 in fedora 14. From 2 days i m not be able to open some of the sites in firefox like warez-bb, addon.firefox, etc.
View 1 Replies
View Related
Aug 7, 2010
I'm running dual boot with Vista and Ubuntu Lucid Lynx. for few days i was running Ubuntu only, downloaded some files and created some directories. few minutes ago, i switched to Vista to see something and i wanted to burn some of the files i downloaded using Ubuntu but couldn't find those folders.
i thought maybe its related to different file system or something so i switched back to Ubuntu and surprise! my folders are not there, instead i got a file, of unknown type with the same name as the folder had! in another folder case it's was an image (some print screen of my browser screen - Mozilla) and again with the name of what was the folder! first - what the hall had happened? second - can i recover my data somehow?
View 7 Replies
View Related
