Networking :: TL-WN821N "Atheros" Revert To Ubuntu Driver?
Jun 20, 2010
I need some help, my wirless usb card which is a TP-Link TL-WN821N card was working fine, except that it would drop the connection once in a while.I got the windows XP driver and used the graphical ndiswrapper tool to install it, and "Hardware Present = Yes" showed up next to the driver.So I followed the guide and edited my blacklist.conf to add the the atheros and any other conflicting drivers.After that, I rebooted, but iwconfig and ifconfig doesn't show my wireless card anymore.
lsusb shows that the card is detected,I can also tell cause the activity light is constantly on instead of it blinking.I decided to uninstall the windows wireless driver from the graphical tool, and hash out the blacklist entries and reboot the pc. But still my wireless card is not working.I just want to revert to ubuntu's own driver, how do I do that now?
View 4 Replies
ADVERTISEMENT
Mar 19, 2010
I just downloaded Ubuntu Studio on my laptop and I can't get the wireless to work. I think it's because I need a driver; the Atheros AR928x. Whatever the driver is, it works with the pretty unpopular Musix distribution, because wireless worked instantly when I got that. I switched because it was old and slow.
View 3 Replies
View Related
Nov 12, 2010
I've been trying to install the network adapter for the ar9285 driver using compat-wireless-2.6.32.16.tar.bz2 found at [URL] The commands I run after extracting are:
cd ~/Desktop
cd compat-wireless*
scripts/driver-select ath9k
Then after typing scripts/driver-select ath9k. This happens:
Processing new driver-select request...
Backing up makefile: Makefile.bk
Backing up makefile: drivers/net/wireless/Makefile.bk
scripts/driver-select: line 73: perl: command not found
[code]...
View 1 Replies
View Related
Jun 29, 2011
I am using ubuntu 9.10. Kernel version is 2.6.31-14-generic. I couldnt find driver for Atheros wireless card which shows in 'lspci' 0c:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
View 9 Replies
View Related
Feb 9, 2011
I have CentOS 5.5 and I can't install the driver for the Atheros AR5006X Wireless.The current state of my CentOS is:
*) If I run lspci, I get 03:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) (wrong model)
*) If I go to System->Administration->Network, I see the wlan0 device with xlan0 name, but if I tried to active I get: (and the same when the system is rebooting)
Error for wireless request "Set Mode" (8B06):SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0...
View 7 Replies
View Related
Jan 5, 2010
I'm trying to find a driver for my wireless card (Atheros AR928X) and I think it's ath9k what I need. As far as I know there isn't a linux driver for it, so I installed ndiswrapper to use a windows driver instead. The problem is that when I type modprobe ndiswrapper I get "bash: modprobe: command not found" (even as root). I know I'm missing something about modprobe, but I can't find any help on google. Anyway, I installed ndisgtk next, because I thought it would be easier, but when I go to System> Administration> Windows Wireless Drivers I get a message "Unknown error".Do you have any ideas on how I'll make ndiswrapper work?
View 3 Replies
View Related
Feb 26, 2010
I recently switched from Windows XP to a clean install Ubuntu Karmic Koala 9.10 but it seems to be quite a problem to get the wifi up and running. In Windows the nearby network all appeared in network connections but the same section in Ubuntu is empty. So I decided to go with the ndiswrapper guide to solve the problem with an unclaimed driver. After an entire day messing with my computer I'm still not close... Below follows excerpts taken from the Ndiswrapper guide with posted results from my computer. "ndiswrapper won't work until it thinks that your Windows drivers have been properly installed and that they are the appropriate ones for your wireless card. You can run the command: ndiswrapper -l"
result:
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
net5211 : driver installed
device (168C:0013) present (alternate driver: ath5k)
So I've posted the result the name of my wireless card below: lspci -nn
Result:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:0259]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:1259]
[code]...
It seems like the network is disabled or unclaimed or both. What to do? I'm stuck after spending an entire day trying to install the wifi. I had no problems in Windows XP but it seems to be quite impossible in Ubuntu.
View 7 Replies
View Related
Apr 21, 2011
I have an ASUS P5Q PRO motherboard with an integrated Atheros AR8121/AR8113 PCI-E Gigabit Ethernet Adapter.I installed Ubuntu 10.04 "Lucid" 64bit Kernel version 2.6.32.21 I have read that the driver isn't in the kernel, but there's a strange thing :
First if I try to run lspci from command line it doesn't reports Atheros Ethernet Controller.
Second If I try to run lshw -C network from command line it doesn't reports Atheros Ethernet Controller.
Third if I run ifconfig it only returns my loopback address.
Can I suppose that my Ethernet Intel Gigabit Controller is broken or that Atheros driver is missing?
View 4 Replies
View Related
Jun 26, 2011
I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.
I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.
I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.
NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7
When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .
View 4 Replies
View Related
Jul 7, 2011
I have installed CentOS. I have two ethernet card (one onboard and one PCI). I am able to set ip for realtek ethernet card and my atheros(on board) is not shown in network ifconfig shows only one ethernet card (PCI) hen i gave the command lspci i got the following output
01:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
03:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
View 4 Replies
View Related
Mar 3, 2011
I got a TP-LINK USB wireless module - TL-WN821N, using Ubuntu 10.4 (same problems were also seen in 10.10).
From everything I've read online, the usb should work just fine, since the Atheros ar9170 is built into the kernel. However, when I plug it in, it is detected as a USB device, but there is no wlan associated with it, and basically - nothing happens. Am I doing something wrong? what should I do so that the Atheros driver is associated with this device?
btw, on Windows it works fine (with the drivers).
Some logs:
Code:
$ uname -mr
2.6.32-28-generic i686
$ lsb_release -d
Description:Ubuntu 10.04.2 LTS
[Code]...
View 2 Replies
View Related
Sep 6, 2010
get this working all of the time instead of the constant dropping that I experience -- i've read a lot of the posts and think i have the right driver installed but there never seems to be a major improvement.Running a p4 2.8 ghz system on lucid and have the most recent kernel installed.Thought I'd give it a last attempt with help before chucking it and getting an adapter that's more compatible
View 2 Replies
View Related
Apr 17, 2011
WiFi adapter TP LINK WN821N is not working in 10.10, WN821N is notworking.
[Code]....
View 3 Replies
View Related
May 31, 2010
I made the error of installing FGLRX on lucid. After the install, Plymouth resolution sucks and my laptop will not come out of suspend/hibernate. When I use jockey-gtk to disable FGLRX, it will not allow me to use compiz for 3d graphics. However, out of the box, I was able to run compiz no problem.How can I revert lucid back to factory form, where it was able to perform 3d acceleration without the use of FGLRX?
View 3 Replies
View Related
Dec 26, 2009
My GMA500 (poulsbo) driver is not working any more because of the latest update I made using Software Update.
The update was a new kernel:
[omass@omass ~]$ uname -a
Linux omass 2.6.30.10-105.fc11.i586 #1 SMP Thu Dec 24 16:26:26 UTC 2009 i686 i686 i386 GNU/Linux
Now, after this update, when I reboot I get the following error code...
View 3 Replies
View Related
Mar 23, 2010
where to find atheros ar8131 driver for suse linux 9.1
View 14 Replies
View Related
Apr 9, 2010
I have a PCCHIPS P47G motherboard, with a Atheros AR8112 ethernet interface (took me a while to even find that out!). I can not find a driver for that interface! I've Googled around for drivers and come up with nothing.
View 1 Replies
View Related
Jun 10, 2010
install my atheros 9285 wireless card driver in backtrack 4 in vmware i am pretty new to linux and have been playing with various linux commands to see if i can get more familiar with linux. I have downloaded a linux driver for atheros card but dont seem to be able to install it could some one please advize on where to download the correct driver for my card and how to install it any help will be very much appreciated ps i have been following various guides and downloaded a driver but cant get it into the root directory of linux in vmware or inst airmon-ng comes back with no interface still
View 1 Replies
View Related
Sep 22, 2010
I tried to compile Atheros AR8152 PCI-E Fast Ethernet Controller driver for fedora 13 64 bit kernel version is 2.6.34.7-56.fc13.x86_64. I have installed kernel source , kernel header and necessary all things to compile it. (linux-firmware-20100806-4.fc13.noarch also installed). I tried AR81Family-linux-v1.0.1.13 source from Atheros web site.
But when I try to make it it give following error.
Code: Makefile:173: *** *** Aborting the build. ***
This driver is not supported on kernel versions older than 2.4.0. Stop. It is not compiling issue because I compiled and installed broadcom wireless driver.
Makefile is attached here (renamed as Makefile.txt -> Makefile)
View 5 Replies
View Related
Apr 8, 2010
I am trying to clone a working Centos 5.4 system onto a new box with a ASUS P5KPL-CM motherboard. I have done so by plugging in a Realtec lan card - but can't get the motherboard lan working. Googling tells me the motherboard has a Atheros L1E lan chip - but I have installed several kmod drivers from ELREPO - but still can't get the on-board lan working. So far I have installed:
kmod-atl1e
kmod-atl1
I have just installed these with yum - but no new hardware appears in the network gui dialogue. Am I missing some step here - or is there another driver I should be looking for.
View 5 Replies
View Related
Aug 17, 2010
I installed Firefox 4.0 beta on Ubuntu and it made Firefox into Namoroka. Now I want to revert back to the stable Firefox but I am unable to do it. I have tried uninstalling and reinstalling but none of this works.
View 9 Replies
View Related
Jul 25, 2011
I'm running Kernel 3.0 and i cannot use my TP-Link TL-WN821N v2. # lsusb Bus 001 Device 003: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 [Atheros AR9001U-(2)NG]
[Code]....
ifconfig wlan0 up doesn't work. With kernel 2.6.39 I can use it.
View 3 Replies
View Related
May 22, 2010
my mate "polish dave" came round and hooked his laptop to my network 02wireless with WEP enc, using backtrack he had my password within 15mins.. now i want to copy him and see just how easy it is my 'acer aspire one' comes with a built in atheros ar5b95 wireless (useless) that i cant get backtrack to find.. i bought a tplink usb and now i cant get that to show up either.
View 4 Replies
View Related
Jan 11, 2010
I spent days trying to figure out how to get my atheros AR928x 802.11n wireless card to work in Ubuntu. The card worked perfect in Windows 7 but the connection kept dropping in Ubuntu. It would find my router and connect with 60% signal for about 5 seconds, then fall down to about 25% signal and then cut out altogether. After searching for days to find a solution, I finally figured it out and figured Id post it here to let everyone else in the same boat have a working wireless too!
I found this solution from:[URL].. This solution is for JAUNTY (Ubuntu 9.04), so if you are running Jaunty, you can just follow that post. If you are using Karmic (Ubuntu 9.1), you can follow this tutorial I'm posting. It's pretty simple: First, make sure you got all your files up to date. Type in a terminal:
sudo apt-get update Let that run, and once its done, type into terminal:
sudo apt-get upgrade
Once that finished, restart your computer. Again open up terminal and type:
sudo apt-get install linux-backports-modules-karmic
If you are using Jaunty, instead of karmic type in jaunty, if you use another version of ubuntu, you can find a list of versions and their names here:[URL].. Restart your computer one more time, and you should be good to go! This has been tested and confirmed to work on: -Ubuntu 9.1(karmic) with an Atheros 928x 802.11n wireless card, using the Ubuntu installed network software, in a Gateway NV53 laptop connected to a belkin 802.11n wireless router.-HP base station / 802.11g airport express
This has been tested and does not work/has issues with:
-airport extreme I hope this works for you too, and if it does, please let me know with your hardware and Ubuntu version so I can post here what other setups have been confirmed to let this work.
View 9 Replies
View Related
Apr 20, 2010
Just rebuilt my file/print server using an ECS 945GCD-M Atom motherboard. Running it under 9.10 (2.6.31-20) using the same cable and port on my Netgear switch that my old server connected to at 1GB/s without issue (old server's NIC was Intel-based).
Found the driver is an AR813x, & downloaded & installed the latest driver from here (1.0.1.9). sudo lshw -C network now shows that it's using the new driver, but still sitting at 100MB/s:
Code:
*-network
description: Ethernet interface
product: Attansic Technology Corp.
[Code].....
I can't seem to get it to come up at the full 1GB/s. I also tried ethtool -s eth0 speed 1000 without success. why networking restart ignores eth0?
View 1 Replies
View Related
Dec 30, 2010
I got a used computer (Toshiba Satellite A215-S5829) for Christmas, and it was running Vista *shudder* so I decided to wipe the hard drive, and install the latest Ubuntu. This is my first real foray into linux, and I've loved the system, but the only problem I've had with is so far is I can't get the wireless to work. I believe the card it has is Atheros AR5001, and I've tried installing the "madwifi" drivers, but I can't get them to register. I've been following the suggestions of dozens of different forum posts and answers I've found scattered around the internet, but I haven't been able to get anything to work correctly.
When I view the "Additional Drivers" in System > Administration, it says "Alternate Atheros "madwifi" driver: This driver is activated but in use," but when I click on the internet icon in the top panel, it only gives me the wired connection. It used to also give me the wireless option, just without ever successfully finding any wireless networks to which it could connect. Like I said, I've done about a half-dozen different things without any success.
View 3 Replies
View Related
Feb 25, 2011
I'm trying to get bluetooth working. I have an ASUS USB-BT211 USB 2.0 Mini Bluetooth Dongle. Where do I find the driver and how do I install it? (Currently when I plug the dongle in, it is ignored.)
lshw shows me this:
Code:
Bus 008 Device 003: ID 0cf3:3002 Atheros Communications, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
[Code].....
View 1 Replies
View Related
May 2, 2011
I realise there are a few threads of issues with the AR8152 chipset and Ubuntu 11.04, however, my issue does not appear to be the same as others, nor does there appear to be a consistent solution yet. My ethernet worked fine in Ubuntu 10.10, but after upgrading to 11.04, I experience the errors I am about to explain. I also experience these when booting off a Ubuntu 11.04 Live CD, so it's not just the upgrade the caused the issues. The issue is, if I turn on my system without the ethernet cable plugged in, and then plug the ethernet cable in once I've logged into Ubuntu, the system will not detect it, at all. No amount of network manager of dhclient eth0 will get it to function, however, the device itself still appears in the system. If I turn the system on with the ethernet plugged in, however, it will get an IP address and function correctly. I tried to download the drivers from Atheros and build them, but for whatever reason it complained about me not having autoconf.h or automake.h (can't remember which), despite having build-essentials and linux-headers-generic installed.
View 1 Replies
View Related
Sep 1, 2011
My old Winbook laptop had good wifi connection under Ubuntu 9.10 but shows 'disabled' under Ubuntu 10.04 and 10.10. At least under 10.10 it came up with working video (had to mess with GRUB on 10.04 before video would work). I have an onboard wi-fi card that has never worked well with any Linux as far as I know but the Atheros PCMCIA card worked solid under Karmic (9.10). Here is some diag. info.
sudo lshw -c network
*-network:0 DISABLED
description: Wireless interface
product: PRO/Wireless 2200BG [Calexico2] Network Connection
[Code].....
View 4 Replies
View Related
Jan 12, 2010
I've got a little netbook, and all works fine, except for one small thing. I'm able to connect to a wireless network with my Atheros AR5001 just fine. However, if I right click on the network icon, and disable network or wireless and enable it again, wireless won't work anymore. I can't see and connect to any network at all. Except when using airodump-ng from the famous aircrack-ng tool set. When using airodump I'm able to see any network and their specs just fine. I don't even have to be in monitor mode to do airodump-ng (the wireless must be off in the network manager though). Is there any way of getting my wireless back when I turn it on again?
View 9 Replies
View Related
