Red Hat / Fedora :: Dual Monitor - Graphic Not A "spanning" Desktop
Apr 6, 2010
have an Nvidia 8400GS installated (one VGA one DVi) and I have two Acer monitors (same size different model) one is attached VGA otehr DVI. The dual graphic seems to work; however, it is MIRRORED! It is not a "spanning" desktop that I would prefer. I tried to install the drive from nvidia but once I try to restart X it won't load and I have to revert back to my backup config which mirrors the desktop on both screens. (I can see myself typing on both screens.
[Code]....
View 1 Replies
ADVERTISEMENT
Sep 23, 2010
Ever since upgrading from F11 to F13, wallpaper spanning has been driving me nuts. No matter what the size of the wallpaper, I cannot get it to span two desktops correctly anymore. Most styles (zoom, scale, etc...) cause the image to be duplicated on both screens and the "span" style centers the image between the screens and appears to scale down the image leaving large gaps on either side. It's like the background program doesn't recognize the "virtual resolution".
View 8 Replies
View Related
May 3, 2010
I found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.
View 1 Replies
View Related
May 19, 2011
I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine.
But since a while it doesn't work properly anymore:
At home it *still* works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. Does anyone have any idea for fixing it? I've uninstalled and reinstalled the ATI restricted drivers and that seemed to make it work initially, but it still works just sometimes. This is my xorg.conf currently:
Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[6]-0" 0 0
Screen "amdcccle-Screen[6]-1" 1280 0
EndSection
[Code]...
View 1 Replies
View Related
Jan 27, 2011
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
View 5 Replies
View Related
Mar 9, 2010
I am trying to set up dual monitors for lenny but nosuccess for the moment.
They were working fine for the same setup on ubuntu.
Using xrandr I get:
I read that virtual screen size could be the maximum part which is of no use in comparison to the current size.
So setting a virtual part in my xorg does not help much. If the above is right.
I have:
How to get the external monitor work in the extened screen mode.
View 2 Replies
View Related
Feb 21, 2010
I have 2 monitors. I'm using the Nvidia driver in Twinview Mode on the right side. I can move the cursor from one monitor to the next and I can drag applications between the two. I have multiple activities. And the second monitor selected one of those other activities as the background. I'm not sure how this was chosen, or if I have a choice. Anyone know? Do activities affect what is displayed in a dual monitor setting? As I toggle through the activities, the two monitors change, but never to the same one.
When I open an application, it's a guessing game which monitor it appears on. Can I control that?
I know if one clicks the top left corner of an application they can send it "To Desktop" ("all", "Desktop 1", "Desktop 2", etc). If I could assign "Desktop 1" to monitor 1, and "Desktop 2" to monitor 2, I could then use the "To Desktop".
At a minimum, how does one control where applications open in a dual monitor setting?
View 1 Replies
View Related
Jul 7, 2011
I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW).I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine.
But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either:
[code]....
View 1 Replies
View Related
Jan 20, 2011
Im running a wee Aspire One, 1024*600 with an external monitor 1024*768 (maverick desktop edition- 10.10) I have them set up independently, the external is to the right, and above my aspire. I have set this up in the monitors options. But it seems the desktop environment (although not the backgrounds) extend off to the right of my aspire (under the external) and to the left of my external- (above my aspire).
I know that it may be nit-picking, but it is a right pain when I 'loose' stuff on this phantom desktop space. For example- when i move my cursor into one of these spaces- and have to wiggle it about till it pops onto one of the screens. Also- i'd like my screensaver to pop up on both screens, and span them both- not just be repeated on both...
View 9 Replies
View Related
Jul 20, 2010
I was wondering what is the best package for a desktop computer 64bit, ATI Radeon HD videocard with dual monitor compatibility?Also, I would like to know specs such as an extense forum discussion of the distro and easy dependencies installation such as the yum command.
View 2 Replies
View Related
Feb 3, 2010
On a galactic scale, I have a very, very minuscule problem, but it is irksome nonetheless. I have a machine running Fedora 12. I have two monitors attached--both 19" flat panels at 1280 x 1024 each. At some point I created a desktop background image that was 2560 x 1024. I guess I'm sort of used to Mac OS X where one can set separate images on each screen (so I'm used to having a right image and a left image).
Anyway, I set the image as my desktop background, and it spanned both screens as expected. I can't tell you for the life of me what setting I had it on (scaled, tiled, etc.). But for some reason, after running a set of updates, my image no longer spans both screens. Instead it is cropped from 2560 x 1024 to 1280 x 1024 and appears the same on BOTH screens. I've tried all five settings in the "Appearance" panel (gnome-appearance-properties). "Scaled" has the image shrunk down to 1280 x 512, and appears on both screens, with bars above and below it.
"Tiled," "Zoom," and "Centered" all have the image as explained earlier--cropped to 1280 x 1024 and appearing the same on both screens."Fill Screen" smushes the image so that it is half as wide but every bit as tall, and displays that on both monitors. Again, I realize this is silly to be considered a "problem," but it USED to appear normally and now I can't get it to anymore. Anyone else experience this or know what the deal is?
View 5 Replies
View Related
Apr 23, 2011
I am attempting to use dual monitors in Fedora 14 using an AMD ATI Radeon HD 5700 Series graphics card (not that I think that has anything to do with anything, but who knows), and want it to where my second monitor is its own virtual workspace so that I can switch between my other workspaces on my original monitor without switching the workspace on the second monitor. This way, I can watch movies or what-not on my TV (2nd monitor) while working on my original monitor.The only thing I found that was even close was setting the 2nd monitor up on it's on x server, which I don't want to do. Also, as it is now, I have my panel on my original monitor, but the windows do not see it when I have it aligned on the right (the windows don't adjust their size to account for the fact that it is there). I know a way I can do a work-around for this, but I would like to know if there is a "correct" way to do this. I know I can tell the movie player to show on all workspaces and have it on the 2nd monitor.
View 1 Replies
View Related
Jan 7, 2011
how do i configure a designated monitor to be my main desktop when running dual monitors in separate x windows?i cant use twin view, as full screen issues and refresh rates are different.
View 1 Replies
View Related
Jan 30, 2010
I want to buy a laptop with gma 4500hd WHAT I WANT IS
1. 2D AND 3D full support eg compiz, full functional kde4+effects (not to be slow)
2. full hd support
3. oss driver
4. ability for dual head monitor setup
searching in google find out that as fa as it concern the dual head setup there is a limitation on virtual desktop for older gma cards
View 1 Replies
View Related
Jun 16, 2011
is there any way to activate the graphic cards without a monitor?It seems in xorg.conf, a "Device" had to be referenced by a "Screen" to have it activated.
I wonder is there any other way to activate a graphic cards without monitor connected to it?
View 1 Replies
View Related
Apr 19, 2011
Is there a graphic tool that can monitor the traffic over a USB port?
ie like system monitor for network traffic but over a specific port?
View 1 Replies
View Related
Nov 19, 2009
Long time reader, first time poster to the forums. I have installed Fedora 12 onto a desktop here. Fresh install and fully updated as of today. In this system there is a radeon 7000 graphics card that Fedora set up dual display for me. This is working fine but unfortunately im seeing a problem with the top and bottom of one of the displays.
Please see the problem here: [URL]... The mouse will go underneath or above the areas i have pointed to. Any ideas what is wrong? In fedora 9, 10, 11 this was all working fine but i did have to use xrandr manually to get dual display working. Edit: Update:
I dd not mention that i kept my home directory. On futher inspection it seems that the issue is because of a .folder in my home directory that was backed up and restored on the fresh install. To check this i added a new user to the system and logged in with a fresh home directory. Does anyone know which folder or file this setting this is stored? I tried logging out, moving .gconf .gconfd .gnome2 .gnome2_private and the .gtk folders to another location then logged in to no avail.
View 1 Replies
View Related
Jul 20, 2010
Using a nvidia graphic card with multi monitor with two monitors. Can I have one with xbmc and other with normal KDE (firefox, xchat, ...).
Can I do this in linux (Slackware)?
View 3 Replies
View Related
Jun 28, 2010
I know there are a lot of dual monitor threads.I've read them, and I even checked at the nvidia forum.I don't see something similar enough to my problem so I'm thinking maybe it's not a driver issue.I'm running F12, both monitors were working and I configured them properly and they were fine.Yesterday I installed the nvidia drivers as per Leigh's tutorial.Once I got that sorted out and rebooted, my secondary monitor was no longer registering.I checked in display settings and it does not recognize the second monitor.I tried going to system->administration->display but after I authenticate nothing happens.
View 3 Replies
View Related
Jul 4, 2011
I am using lenovo laptop and I have docking system, to extend another monitor on my desk for display.
Laptop 15.6 inch: 1600-900(16:9)
Acer 21 inch : 1920x1080 (16:9)
How to setup in fedora, so I can have both monitor display same screen, with respect of their resolution? When I click "MIrror displays" the resolution gets messed up. I want to use my monitor for the main use and close the lid of the laptop.
View 2 Replies
View Related
Dec 27, 2010
I am running Fedora 13 on a PC I built myself - MSI motherboard 785-E53. It has onboard DVI which my primary monitor is hooked to. I added an older 17" CRT to the onboard analog output and the main desktop with my icons and panels immediately switched to the CRT. Kernel is 2.6.34.7-66.fc13.i686, lspci -v says VGA compatible controller ATI Technologies Inc RS880 (Radeon HD 4200). How can I get flatscreen on the DVI output to be the primary?
View 10 Replies
View Related
Oct 19, 2009
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
View 3 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
Apr 8, 2009
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies
View Related
Jul 4, 2010
I have just upgraded from Fedora 11 to Fedora 13 and now can't get my two monitors working as a single "screen" (it worked under F11). I have a GeForce video card with two monitor outputs
lspci -v
01:05.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GT] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Device 1acc:0846
Flags: 66MHz, medium devsel, IRQ 16
[code]...
I then edit the xorg.conf to change the driver from nouveau to nv and I can start X and the LCD displays the desktop at a resolution of 1680x1050 (good) but the CRT just displays random blocks of colour. At this point I also get a kernel crash - see dmesg output attached, but the system is then OK to use. I have tried editing the xorg.conf to add a second monitor and a virtual screen resolution to match the two monitors (1024x768 + 1680x1050) combined (2704x1050) but still only the LCD monitor works, but with the virtual desktop that can be nudged around with the mouse. I would like to get back to using both monitors with a virtual screen across the two monitors.
View 3 Replies
View Related
Sep 11, 2010
I run a dual-screen setup, and the installation detected both screens without troubleowever I want to change primary screen, so the panels and menus will be located in the biggest monitor.I am not able to do this in the System -> Preferences -> Monitors interface. Where can I do this simple operation
View 2 Replies
View Related
Mar 18, 2011
I was using dual monitor on my Fedora 14. I followed leigh123linux's instruction and I was successful. However I cannot use the dual monitor any more - just see the cloned two monitors... I suspect something happened during update. ATI catalyst control center says I need to run it as superuser, but I do not know how to.
View 4 Replies
View Related
May 25, 2011
I have recently installed FC15 on my system. Dual monitor support seems to be broken with my setup. I am using the latest NVIDIA binary blob driver (270.41.19). I compiled my own kernel for it, version 2.6.39.
When gnome3 starts it almost manages to boot up, but then it crashes and gives me the option of logging out. I have my system booting into target 'multi-user.target' since I was doing some other stuff and I use `startx' to start gnome3. I tried running having X use xinerama and not use xinerama, both cause gnome3 to crash, albeit in different ways. Other than that I am running a stock install as far as I know.
If there are some logs I should be looking at for gnome3.
View 4 Replies
View Related
Dec 12, 2009
I recently upgraded to fedora 12. Before the upgrade I had a desktop background which filled the entire 2 screens. After the upgrade i noticed that the background is displayed on each monitor twice so when displaying the desktop I see the background twice.I tried to change the settings for it like 'center' and 'fill screen' but to no avail. The rest of the dual monitor setup works fine.
View 1 Replies
View Related
Nov 19, 2010
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies
View Related
