OpenSUSE :: How To Change Font Settings For Other Languages
Jul 17, 2010
I just installed openSUSE 11.3 (Gnome). I am using Korean language, but I don't want to make Korean language as my default language. So I installed Korean lang as secondary language. It works well.But the problem is Korean font. Actually BEFORE installing the language, the font look much nicer. But as soon as I installed the language, the font became ugly.Even if I uninstal the language, the font still remains the same (ugly).
Where is the font setting for other languages stored? It would be nice if I can set default fonts for Korean language manually.
View 2 Replies
ADVERTISEMENT
Jan 14, 2011
Whenever I set some font settings in these two web browsers, and apply them; they revert back to other fonts. The reason for this behavior is not known to me. How to set the required fonts and not allow these two browsers to change them on their own.
View 9 Replies
View Related
Apr 29, 2011
When I increase the font size from Konqueror settings the web browser fonts change but the file manager fonts stay the same. Is there another way of setting them?
View 4 Replies
View Related
May 17, 2010
Directory names and certain filenames appear in a bold font that gets cut off on the right side of each string of text. This issue only arose after upgrading to 10.04 LTS. I can not figure out why the upgrade would change the terminal font settings in such a way.
View 4 Replies
View Related
Aug 16, 2010
I can't change fonts in Firefox preferences (Content).
My OS is openSUSE 11.3, KDE 4.4.4. release 8.
Any type and size of font I use, nothing happens. It's still same font which I choose for the first time I've started Firefox afer installing openSUSE 11.3.
View 4 Replies
View Related
Jan 2, 2011
Whenever I open a Konsole via the control panel widget the font in the console window is Monospace 8. Increasing the font via settings remains in place only for the time the window is active. When opening Konsole again the font is set to tiny Monospace 8 again. I have checked the settings in the *.profile files in ~ /.kde4/share/apps/konsole. They all contain my preferred font. Still, Monospace 8 comes up. Where else should I look. I have checked all *.rc files too, that are related to konsole.
View 1 Replies
View Related
Oct 21, 2010
First I give a short description what we tried, then I put our questions. Problem: How to get to run the languages using a live system without a hard disc? We use Kubuntu live 10.04, because it is said to support many languages. What we did:
First we got a burner programm and the isoimages 10.04 for CD and DVD on a hard disc of a windows system and burnt a CD and a DVD. Then we tried both CD and DVD to set in the KDE different system languages and keyboard layout languages and to write languages. In both cases we got a message that the languages are not completely in the isoimage and we started the download of the missing packages. The CD version interrupted the download with an error message. It does not work. We continued with the DVD and could successfully complete the doemload. We could write different languges, but not Korean, Japanese and Chinese. We could change the system language to Korean, but the setting of the keyboard layout didn't give any Hangul/ Korean Characters, only Latin. We tried many things and ask somebody knowing quite well without any success. We tried to toggle/change/switch between Eenglish and Korean using right alt key and tab key, but a friend told us, that an input into a Korean web site typing on the keyboard as it would be a Korean keyboard, was accepted by the web site as the correct Korean input, but the letters that appeared on the screen as the echo of what was typed on the keyboard, was still Latin/English.Therefore we think it is not a problem how to switch between English and Korean. We are stuck with the Korean and didn't try everything for the Japanese and Chinese, we got some Kana but no Chinese characters. But wenn we tried to select a fifth languge keyboard layout, we got a limit and had to remove another one. That is very disappointing!
1) How to get an Korean keyboard echo, that means that the characters which are typed on the keyboard, appear on the screen as Korean characters?
2) How to increase the limit of four selected keyboard layouts.In Windows we can select more than a dozen. Why it is not possible to select any number of keyboardlayouts?
[Code]..
View 9 Replies
View Related
Nov 16, 2009
I'm running OpenSUSE 11.2 on my Acer Aspire One with a 9 inch LCD. I have configured the monitor in Sax2 to reflect the size and 1024x600 resolution, and as a result the desktop fonts are all sized correctly.
However, the fonts on the KDM log-in screen are too large, and I'd like to reduce them if possible. Looking in the KDE Control Center, I tried using the Login Manager utility to adjust the KDM theme, but any changes I made seemed to have no effect i.e. changing the font size, or even the overall theme itself, still resulted in KDM using the default green OpenSUSE theme with large fonts.
Does anyone know, therefore, how to adjust the KDM font size or DPI in OpenSUSE 11.2?
View 9 Replies
View Related
Jun 4, 2010
Virgin has decided to change its email settings, but doesn't support Evolution, so I am not clear on how to implement some of the changes.This is what it asks us to do:Sending mail (SMTP)
SMTP server name
smtp.virgin.net
SMTP SSL
[code]....
View 9 Replies
View Related
Feb 26, 2010
I want to change DNS settings. How do I make it from yast?
View 1 Replies
View Related
Apr 30, 2011
When I try to change some settings of my printer using HPLIP it tells me to add myself to the lp an sys group. Is that safe ? What are those groups used for ?
View 9 Replies
View Related
May 15, 2011
how to disable the power settings for my monitor so that it always stays on.
View 2 Replies
View Related
Jul 5, 2009
I'm on openSUSE 11.1 KDE 4.3 RC, and I'm using the kde-branding-openSUSE with KDM from the factory KDE repo, and factory community repo - everything is up-to-date.For some reason my KDM login settings screen is ALL grayed out, so I can't change the theme/settings. I know that you can change it by going to yast and editing the /etc/sysconfig thinghich I actually tried doing, and failing, which is odd because I changed it once a ltime ago to glassified, but can't manage to do now...) I don't want to use a theme, though, but actually use my current wallpaper and set the settings in the login manager to something of my preference.
View 9 Replies
View Related
Sep 4, 2010
I'm having the following problem with SUSE 11.3 and my Nvidia Geoforce 7300 GT. I have the driver installed but am unable to change the resolution in the Nvidia configuration X-Server. It seems it is limited to the following 640x480 and 320x200. fix this as it looks awful and I know that I should have greater resolutions.
Please find my xorg.conf listed below
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder97.nvidia.com) Fri Aug 27 20:55:22 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
[Code]...
View 9 Replies
View Related
Dec 22, 2010
If you cannot connect with Skype, don't change your settings. The problem comes from Skype. Google for Skype outage.
View 4 Replies
View Related
Jan 30, 2010
I'm using OpenSUSE as a guest OS in VMware. Display settings are 1400x1050@60Hz but I want to change them for 1440x900. Using root account I go to Configure Desktop -> Display -> 1440x900. The first problem is that I can't choose 60Hz, only "Auto" or "0.0". I click Apply and the resolution changes, but if I reboot the computer or just logoff... resolution goes back to 1400x1050. My card and monitor properties: [URL]. Another strange thing is that if I click Ok on the Card and Monitor properties (changing from one resolution to another), I can choose to "Test" it, and xfine2 appears but... it ALWAYS says "1400x1050". An screenshoot of xfine2: [URL].
View 2 Replies
View Related
Jul 25, 2010
I'm trying to figure out how to change the default settings for my printer under Firefox. I'm mainly interested in changing the default print resolution and the pages-per-side layout setting I can change the settings for all KDE applications through [URL], but I can't seem to be able to find the respective dialog for Firefox / GTK applications.
Firefox itself doesn't seem to have a dialog for the printer default settings; I've looked into about:config but all the value names are rather confusing.
My system environment:
openSUSE 11.3
KDE 4.4.4
Printer: Brother MFC-7420
View 8 Replies
View Related
Aug 6, 2011
i have LXDE 0.5.0.4 installed on top of GNOME under deb squeez, i notice slightly different shape and font hinting/rendering quality in both of them.i'm not sure if what im doing is right or wrong but since i cannot find the way to configure font settings in LXDE i try reconfiguring with sudo dpkg-reconfigure fontconfig-config still font rendering quality and shape under LXDE is different with one in GNOME, take a look at two screenshots below, both are using same font and size:
GNOME
LXDE
View 7 Replies
View Related
Jul 19, 2011
I changed font settings in appearance utility today. But now desktop appearance and firefox fonts are too bad and I need to set it to default setting. How can I do that?
View 4 Replies
View Related
Jan 15, 2011
I have recently played around with Mac4lin a program to change the interface to one that resembles a Mac computer. I did not like the settings then decided to uninstall the program. It reverted to a really ugly looking gnome desktop rather than my previous settings. One thing that I don't like is that I have a foot icon on my gnome traditional menu button on the panel rather than the green ball type icon I used to have. I know it's not the end of the world that my icons do not look like it previously did, everything else is running smoothly, though I'm just more annoyed than anything else.
View 2 Replies
View Related
Jul 15, 2010
In testing that all my bits of hardware work I have come to my 3Dconnexion SpaceNavigator. The hardware is virtually new and works absolutely fine in XP (that is what I am trying to escape from).
When the spacenavigator is plugged in it works absolutely fine so long as I move the thing with a soft feather. It is so sensitive that it is un-useable.My problem is that although the system has recognised it and has it in the hardware scan in YaST but nowhere can I find any way to change the sensitivity settings and button functions.
View 5 Replies
View Related
Aug 22, 2010
the solution of my monitor is much to small. So I tried to find out, where I can change the settings of my graphic card and monitor. Unfortunately opensuse only gives me the possibility to change it up to 600x800, which is by far too small. So I thought maybe I need to install a driver... so... there I am ... having question marks around my head and wondering how to install a graphics card driver on my opensuse 11.3.???
And where to find the right ones?
My graphic card is a Matrox Mystique (no 220 or anything else!!). I checked the website of Matrix to find my drivers, but it tells me that there is no driver planned for linux. Matrox Graphics - Support - Latest Matrox drivers for legacy products But I guess I am not the only person in the world who uses this graphic card on linux, so there must be a way to make it work!!
View 9 Replies
View Related
Aug 21, 2011
i have a computer with 3 users on it, and a folder using samba that everyone on the network has access to. Lets say that, the folder is stored in /etc/sharedfolder. What happens is, when user1 puts a folder in it, then logs off, user 2 attempts to modify it and fails, because permission is set to 755, and they are not in the same group. (even if they were, it should still need to be 775) Anyway, my current solution is, every 5 minutes a crontab changes permission like so: chmod 777 -R /etc/sharedfiles && chown useradmin:superadmin -R /etc/sharedfiles Which works, but seeing as there is getting close to a gig in there, this is a bad solution, as it eats up the computers resources. Solutions that i think might work:
1) create a script that only changes permissions that need be changed.
2) change file permission settings to force all documents to inherit parent document settings
View 9 Replies
View Related
Jan 30, 2011
I have been doing some customization to my ubuntu Box related to font settings. Now all the font settings for whole system have been badly scrambled. I am feeling it very hard to reset all the settings too default again.I have been modifying system---> Preference ---> Appearance. if there exists any way to reset my font configuration to default.
View 1 Replies
View Related
May 18, 2010
I upgraded from Karmic to Lucid recently. Before upgrading, I had customized my desktop on Karmic with Compiz, Emerald and new set of fonts. After upgrade (which appears to have gone smoothly, yay!), my desktop retained the previous appearance settings. I want to try the factory default gnome appearance settings for Lucid and still stuck with restoring fonts.
What I have done till now:
0. Enabled Visual Effects from Appearance menu.
1. Theme -> Changed to Human
2. Window Manager -> Still using Compiz
3. Window Decorator -> Switched from Emerald to GTK
4. Font -> Changed first 3 font types in the Font tab to Sans, size 10, 4th to Sans Bold and 5th to Monochrome. Rendering -> subpixel smoothing (LCD)
What I want:
1. Is this the default setting? Have I missed anything in restoring default settings?
2. I have done too many changes to firefox font rendering over time. How do I restore default 10.04 font settings for Firefox? I would ideally love to have an option in Ubuntu which would help me restore factory settings.
View 1 Replies
View Related
Mar 24, 2011
I currently have a Windows XP OS which i want to dual-boot with Ubuntu Linux 10.10 . I put the disk in the drive and chose the option to install Linux through Windows. But it hangs in the middle. I am also unable to change my BIOS settings due to which i can"t change my boot preference. My first Boot is the HDD. I want to change it to CD-ROM. Any suggestion? I also have another PC where i can boot through the CD...I tried installing there by booting from the CD but i get this error message after seeing the purple Linux screen with the loading dots. "(Process:286):Glib warning**:getpwuid:failed due to unknown user id (0)
P.S.- I am not able to see any options while the boot is going on
View 5 Replies
View Related
Feb 19, 2011
I was wondering about a package that can be used to write and compile/run programs in different programming languages. I was also wondering how possible it is to program in Visual Basic 2010 in openSUSE if at all.
View 9 Replies
View Related
Nov 5, 2009
I'm a student in a linux class and we just installed fedora. so far it's nice except that the work we do is in the CLI which I can barely see because it's so small on the screen! I've been squinting at the screen for a little while now but it's just proving to give me more of a headache and hurt my eyes than anything. Anyone know how to change the font size so that I can actually see the work I'm doing?
View 5 Replies
View Related
Jan 27, 2010
Whenever I use lpr on the command-line to print a text file, it uses DejaVu Sans Mono as the font. Is there a way to change this? I'd like to use Terminus as the font instead. I found that CUPS uses Courier as the default font for text files, so somewhere Courier is being aliased to DejaVu Sans Mono, and I have no idea where.
View 2 Replies
View Related
Jun 7, 2011
How can I change the font type and size of the texts below the icons on the F15 desktop?
View 6 Replies
View Related
