General :: Boot / Loading - Lenovo S20 Workstation Allergic - Get A Blank Screen
Apr 25, 2011
I got a new Lenovo S20 and I am having trouble loading Linux. I've loaded these variants with no success:
Ubuntu desktop
Ubuntu server
Linux Mint
CentOS
vmWare esxi
The live CD's run, and very nicely at that. But once I install to the workstation they won't boot. I just get a blank screen. I've tried different bootloaders.. I've toyed with different BIOS settings.. I've even installed to different drives (a hard disk and an SSD). Maybe a hint: BSD installs and runs with no problem at all. I have PC-BSD running at the moment. It's nice, maybe I'll keep it. But I'd rather have Linux.
My amateur computer science mind sees this as not a boot loader issue (recovery mode shows Linux seems to be loading to a point.. but I can't see the script line just before the lockup) not graphics related; UB Server and vmWare are text-only and they won't load either probably not a bios issue (liveCDs run and other people run Linux on S20s) not hardware (Windows and BSD run on this one)
View 1 Replies
ADVERTISEMENT
May 14, 2010
i have installed ubuntu 10.4 on my compaq 615 system successfully but when i restart the system it freezes, jus giving me a blank screen... i already have windows 7 home premium on the system then i partitioned sum space for the ubuntu but it still dosent work...
View 4 Replies
View Related
Jan 1, 2011
I've made a Live CD of version 10.04 on a machine running 10.04 (amd64). The disk boots fine on a 2nd machine but does not boot on the machine that created it. The CD/DVD is new and works for other things so I don't think it is this. The Live CD gets to the ISOLINUX screen but instead of "Loading" the screen goes blank and the system shuts down. I've tried everything I can think of (the disk works fine on another machine).
View 3 Replies
View Related
Dec 26, 2010
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies
View Related
Apr 15, 2011
like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
View 1 Replies
View Related
Jan 22, 2010
I am new to ubuntu and I would really like to try it out, however I cant do the demo it freezes, I cant boot it either. I got rid of the quiet splash and watched it load. The last thing I saw before it went to just a blank screen was the ubuntu logo and it said loading apparmor then ok, went back to the previous command line screen and said done. Then it was just blank. No mouse, no blinking cursor, nothing.
View 2 Replies
View Related
Jun 30, 2010
I'm attempting to install Ubuntu Netbook remix (however I have tried others) on a 32 bit laptop but after it goes through that ubuntu loading thing, it goes blank after that and I've determined that it's not the cd and it's something to do with the hardware after looking at other posts with similar issues. I do not have an operating system on this laptop.
View 3 Replies
View Related
Sep 5, 2010
ive downloaded the Ubuntu CD from the official website and burned it twice, once one a dvd and the other on a normal 700MB CD-RW.in both, the screen went blank after the loading part before the main menu (installation, try it blah blah..)what should i do?btw i use a windows XP and here is my hardware details...sapphire hd 5770 1gb, 4 gb of ram,Intel Core i5- P55 .5 ghz, i think that its enough for the minimum of the ubuntu isnt it?
View 4 Replies
View Related
Jan 21, 2011
Try to load my system today and nothing come up, only the terminal window. Whatever I type in is working, like now I type in the terminal firefox and it is how I ended up here. Try to type thunderbird in the terminal and my mail server started no problem. But nothing on my screen, don't no where to go from here.
View 9 Replies
View Related
Sep 26, 2010
I want to change the Boot sequence in Ubuntu 10.04.
In the past I have used
Quote:
But with 10.04 this returns a blank screen. I assume something has changed.
View 3 Replies
View Related
May 26, 2011
I made my HP DV6000 into a single boot system. Red Hat Enterprise Linux 5, 64bit. I have been trying every cure I can find on the internet. I can seem to find the problem. My monitor show's everything on the screen as it's booting but then, when it's done, it goes blank and no keys/buttons work. I have it on the GNU GRUB screen right now. (The monitor is working fine (on this screen)
View 1 Replies
View Related
Apr 9, 2009
I'm trying to build a dual boot ubuntu 8.10 and fedora 10.I have ubuntu sucessfully installed. with a free partition ready for fedora.I cant seem to get fedora past the beginning of the install. Once it says its loading anaconda, my screen either goes blank, or the anaconda fails and the install exits, telling me to reboot my system.I have downloaded the DVD twice. once from the website, and i think when I bruned it it didn't burn right, I then downloaded it from torrent just to be safe and reburned at the slowest speed. It passes the media test.
I have been reading around it may be cause of my video card?My computer is the following.AMD Athlon +2400 XPXFX Nvidia Geforce 6800 GT or something close.80 gig hard drive1.5 gigs of DDR ram.MSI Motherboard not sure of model off top of my head.I really wanna get this dual boot working, As I feel fedora may have advantages over ubuntu. I was going to try to get ahold of another video card, and maybe try that. What do you think I should do
View 14 Replies
View Related
Jan 14, 2011
I fixed this issue on 10.04, but just recently (1 hour ago) upgraded to 10.10 and am having the same issue. Machine boots fine, but the screen is blank for most of the boot, and plymouth is up for about a half second before I get to the login screen.I've tried searching the threads, but for the life of me I can't find the solution and can't remember what I did to fix it on Lucid.
View 4 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Nov 13, 2010
Just upgraded from Karmic to Lucid.. Everything was running smoothly except compositing so I enabled the Open Source Edge repos and downloaded the latest driver my card (a ati radeon x1650). I rebooted to a bios splash and then nothing.. blank screen. After about 4 seconds of nothing the monitor flicks on showing the kubuntu bootsplash for a split second then blank again.ctrl + alt + f$ isn't displaying a tty for meI'm not getting the usual grub menu on startup (esc isnt bringing it up)(it's a usb keyboard enabled in the bios)
View 3 Replies
View Related
Jul 8, 2011
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
View 2 Replies
View Related
Sep 11, 2015
I have an system that d8.2 appears to install correctly. On first (or subsequent) boot, I get the DB8 load screen, then a quick fsck, then nothing. I appear to have some sort of environment running as I can move a mouse pointer, but nothing else.
CTRL-ALT-F2 results in the mouse pointer vanishing, but nothing else. I expected to end up at the CLI.
I have tried different installs and options, always the same result. This machine ran an earlier version with issues.
View 7 Replies
View Related
Jun 18, 2015
I have this machine (motherboard ITX Jetaway NF94-270-LF based on CPU Atom N270, full specs here) as a server for some time now (about 4 years). Debian 8.1 is installed on it.
Two days ago, after a power failure, the machine was not able to complete the boot process. I attached a keyboard and a monitor (on VGA port, the motherboard also as a DVI one, but I don't have a suitable monitor) to be able to see what's happening and interact with the machine. Unluckily, at a certain point during the booting sequence the screen goes blank and the monitor goes in standby mode; apart from that, the boot process continues in the background.
As far as I can recall, this behaviour existed for at least a couple of years (if not from the beginning) and the boot process was always completed successfully until two days ago.
The screen goes blank after the setup of the keyboard mapping. I tried everything to avoid the screen going blank: in the Grub menu I set the "vga" parameter, the "nomodeset" parameter, the grub_gfxmode parameter, I removed the "quiet" option, I removed the "load_video" line, I forced the BIOS to only use the VGA port for the video and so on, in order to disable or configure differently the video and the framebuffer. All these stuff had no effect at all: the screen keeps going blank at the same point during the boot process.
The only way I was able to use a fully booted system through keyboard and monitor was via the rescue mode of the Debian 8.1 netinst image. But that way, of course, I wasn't able to observe the normal boot process. So, I checked the boot parameters of the rescue mode and I found that the only usefull parameter was "vga", which I already used and was ineffective.
View 4 Replies
View Related
Aug 23, 2013
I have some problem with Debian 7. Just installed Debian 7 wheezy.
Motherboard Intel D2500CC, graphics - Intel GMA 3600. Monitor (BenQ V2200 Eco) connected via VGA cable. No X server installed.
After GRUB boot as soon as modesetting kicks in, the monitor loses the signal and goes black. Keyboard does appear to be active, as Ctl-Alt-Del will cause a reboot.
I tried nomodeset, vga=791, 771 etc kernel parameters, but this won't work.
View 10 Replies
View Related
Nov 13, 2010
A surprising thing has happened! I have been happily using open suse 11.3 on an HP probook 4320s laptop. On reboot this morning, the screen starts out fine, but progressively fades into white and the boot does not seem to happen (at least there is no sound, since I cannot see anything). I am left with a completely white screen. Things are fine with the failsafe mode.
View 9 Replies
View Related
Apr 7, 2010
Last night I upgraded from 9.04 to 9.10 in search of faster internet (which I got by the way), but now whenever I try to boot it goes to a blank screen for about 10 minutes befor going to the desktop. Its completely blank and has no cursor or anything. It's a huge problem and I could really use some help. 9.04 never did this.
View 9 Replies
View Related
Oct 16, 2010
I have a blank screen on boot up. Has happened since 10.04.It's this problem[URL]I tired their three solutions did not work however clicking F6 and slecting nomodeset before booting got farther then ever and then saidI have tried different images, betas RCS full versions, netbook, derivatives and its all the same.hats going on? Can it be fixed and is this always going to happen now or is it just a two cycle bug?
View 3 Replies
View Related
Nov 1, 2010
I have a HP EliteBook 2730p. lspci reports this for my graphic card:
Code:
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 30eb
Flags: bus master, fast devsel, latency 0, IRQ 30
[Code]....
I updated from Lucid to Maverick. When I boot with the new 2.6.35-22 kernel the screen stays blank after grub. When I boot the old 2.6.32-25 Kernel everything works fine. I tried to boot 2.6.35-22 in Recovery Mode. When I do this I see some kernel messages in text mode and then the screen goes blank again.
View 1 Replies
View Related
Nov 15, 2010
I upgraded 10.10 from 10.04 from the update button from within the update manager. It seemed to upgrade ok but after I shut down and turned it back on it goes to a blank screen. If I then hold the power button to turn it off and back on it then loads to a boot screen where about 6 options with recovery option are listed. The top 2 options do not work as they just go to a blank screen but the bottom 2 give me some other choice including seeming to boot up to a normal Ubuntu environment. How can I fix it so that it boots to a normal Ubuntu 10.10.
View 8 Replies
View Related
Nov 18, 2010
I have always had Ubuntu installed along with Win 7 but rarely use it, i only use it if i am flashing firmware to my phone or something similar.
I uninstalled my older version of Ubuntu because it was becoming sluggish and have tried to install the 10.10 version a few times today, but every time i boot into Ubuntu, i get a blank purple screen and nothing else.
My mouse curser is the only thing that is working but there is nothing to click on and nothing shows if i right click.
View 4 Replies
View Related
Mar 22, 2011
I have a toshiba satelite pro laptop (can't think of the exact model at the moment) with 4gb ram + 320gb hard drive. i have been dual booting ubuntu for roughly a year, and throughout all that time windows has become less and less used, therefore last night i took the plunge, and went about installing ubuntu(10.10) as my main operating system and removing windows, i did this via a usb, using Unetbootin.
I used one of the .ISO's from the official ubuntu site, and went through the installation processall went well, no errors within the installation process, hard drives were partitioned fine etc, however when i've come to turn my computer on for the first time this morning i get a black screen with a blinking underscore straight after the toshiba logo flashes up and i get the choice to go to bios options.
If i do go to bios options my hard drive is listed fine, and if i try to boot from my usb again, it doesnt work, and attempts to verify dhcp and eventually tells me it couldnt find a boot file, my laptop however is plugged in via an ethernet cable. it doesnt work with or without the ethernet cable. i have tried leaving it for about half an hour and nothing has changed, i also can't boot to GRUB.
View 2 Replies
View Related
Jun 25, 2011
I just finished installing 10.4 on my Dell Latitude X300, and it will only run in low-graphics mode. I will try to boot like normal, but then a blank screen. I have to boot in Recovery Mode and use the Failsafe graphics option.
View 4 Replies
View Related
Jul 9, 2011
so I had a black screen when I was starting up my PC instead of the normal Ubuntu with the dots underneath. I have Ubuntu 11.04 on a dual-boot with Windows Vista. It would still boot normally and work fine but I wanted it with the Ubuntu and dots etc.
After looking at many sites to try and fix it that didn't work I found this: [URL]. That didn't work so I found this next: [URL]
I did what it said by removing
Code:
vt.handoff=7
Then when rebooted I got the Ubuntu with the purple background and dots but the boot would hang (always when all 5 dots were orange). I booted into recovery mode and I chose "File System Check" on reboot and it would get to the bit with 5 orange dots then it would check disk for errors and go to login screen then work fine.
If I added vt.handoff=7 it would boot normally with a black screen again.
RESULTS.txt is from when I had vt.handoff=7 removed and I was in Recovery mode>resume normal boot>"sudo bash ~/Desktop/boot_info_script.sh".
RESULTS1.txt is from when I booted up with the disk check and was in Terminal.
EDIT: Also just recently I'm getting a lot of boot hangs, freezes (where everything on screen will freeze and if I was playing music in Banshee it repeats the last 3 seconds until I hold down button on PC), and it will sometimes just restart randomly. Not sure if that related or not...
View 9 Replies
View Related
Dec 26, 2009
Testing a Laptop with a live CD proved the gfxboot menu and loading screen during loading. After installing, I am seeing the "behind the scenes" of linux loading and showing done in green.
How do I get the graphical system loading screen shown?
View 9 Replies
View Related
Aug 3, 2011
really wish to customize my GDM for ubuntu 11.4 but failed to do so.....therefore i decided to use alt. such as SLiM.....I could install it properly in virtualbox but when i went to do it on my real ubuntu 11.4 ......the screen stops at plymouth theme or goes blank after loading plymouth theme......then i read further more blogs and made changes and now even if i configure SLim the GDM starts no matter what i do .........
PS : I am new to ubuntu and dont have any knowledge about scripting programming and stuff....
View 5 Replies
View Related
