Fedora :: Virtualbox Error 'Failed To Open Session For Virtual Machine Windows 7'
Jun 6, 2011
When i try to create a virtual machine using the Windows 7 Enterprise Evaluation iso file, everything goes as planned untill i click on the start button. when i click on it i get two error messages. the first: Failed to open a session for the virtual machine Windows 7. The virtual machine 'Windows 7' has terminated unexpectedly during startup with exit code 1. Kernel driver not installed (rc=-1908). The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. i have installed the DKMS package, but when i try to run the command stated in the error message, i get another error message in the terminal:
[code]...
i have to install the driver that is specified (vboxdrv) but i do not know where to find it.
So, i've rebuilded all VirtualBox dependencies with safe flags, then i've recompiled most of the sys-* packages also with safe flags. However VirtualBox still doesn't work.
UPD: virtualbox-bin-3.1.4
UPD2: 3.1.6 and ose-versions crashes with same errors
I have installed virtualbox on opensuse 11.2 64bit.
When I go to open a machine it says
"Failed to open a session for the virtual machine Windows XP. The virtual machine 'Windows XP' has terminated unexpectedly during startup with exit code 1."
" Result Code: NS_ERROR_FAILURE (0x80004005) Component: Machine Interface:
[Code].....
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary."
after upgrading VirtualBox from 3.0.x to VirtualBox-OSE-3.1.2-1.fc12.x86_64 VBox fails to start any virtual machine with error: Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
I get FATAL: Error inserting vboxnetflt (/lib/modules/2.6.31.12-174.2.19.fc12.x86_64/extra/VirtualBox-OSE/vboxnetflt.ko): Invalid module format FATAL: Error inserting vboxnetadp (/lib/modules/2.6.31.12-174.2.19.fc12.x86_64/extra/VirtualBox-OSE/vboxnetadp.ko): Invalid module format Kernel is (obviously) kernel-2.6.31.12-174.2.19.fc12.x86_64, but same thing happens with any installed kernel, IE kernel-rt-2.6.31.12-1.rt20.1.fc12.ccrma.x86_64
I reinstalled VBox and kmods got rebuilt but the problem persists.
My goal is to install Windows 7 on a virtual machine running on Ubuntu. The Lenovo machine came with Windows 7 installed, but did not come with a boot disk. What are my options? Should I ask Lenovo for a disk? Will I need to purchase Windows just for the virtual machine?
Every time I try to start a virtual machine in VirtualBox I get this error:
Code: Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup' as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. So I run '/etc/init.d/vboxdrv setup' in the terminal as root and I get this:
Running Fedora 10, I installed CentOS 5 in Virtualbox, but I can't ping the Virtual Machine...
From within CentOS, I can ping my laptop [known as the host?] but from the laptop I can't ping the CentOS Virtual Machine. I tried turning off the firewall on both too... CentOS was able to access the internet through my laptop right away without any configurations too.
Unless someone has an idea to resolve the above, I am also wondering about something else VirtualBox-related:
To see if it was possible to get around the above issue, I was going to install another CentOS virtual machine to see if I can get them to communicate both ways [if at all], but to do so, I think I have to install CentOS AGAIN on another allocated amount of hard disk space. This will take some time, so I was wondering if anyone knew if it was possible to just create a quick duplicate of the previous installation, if you wanted 2 different virtual installations of the same OS.
My laptop is running Linux Mint 9 and I am trying to install Fedora 13 in a virtual machine within Virtualbox. However, it's not working. It takes forever to get past the initial white/blue loading bar when it first boots and then it just goes white, so I can't see anything. I've already tried modifying the bootline parameter of the live CD to include noprobe, noacpi, noapic, nousb, and nofirewire. However, the result is the same. Am I missing something? Is it possible to install this?
My fedora 14 has OpenSSH_5.5p1, OpenSSL 1.0.0a-fips 1 Jun 2010 running. I am able to use putty to ssh to my fedora. I installed NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.3.0) but when i used nxclient to connect to the server i always got 'session x' failed.
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
I recently installed VirtualBox 3.1.8 r61349 from the deb file virtualbox- .1_3.1.8-61349~Ubuntu~lucid_amd64.deb onto a recent clean install of Lucid Lynx on my HP p6210f (6144 MB RAM, AMD Athlon II X4 620 CPU). I then imported a friend's VM and tried to boot it. The VM consistently hangs with the following showing on the console (this is the last 3 lines, for context):
NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2
I thought initially it was a problem with my friend's VM, so I decided to create a new VM from scratch, and boot from a CentOS-5.4-i386-DVD instead, which I have done before with previous versions of VirtualBox. When I do that, I'm able to select my installation method (so I know it's booting from the CentOS ISO), and then it hangs at exactly the same point. I couldn't find any other mention of this problem, but it's a pretty recent release of VirtualBox - I think just days old.
The VM: OS Type=RedHat (presumed 32-bit), 1 processor, 1024 MB RAM
I want to run 64bit windows in a virtual machine on my fedora 14 64bit. using virtual machines and want to know what is recommended for fedora 14 and if 64bit vm's are supported yet.
Currently i have a dual boot on my laptop of fedora and vista. Is there a way that i can use virtualbox to open my windows partion while using fedora? I understand that virtual box makes a "partition" on my fedora partion and runs of that. It would be pretty awesome if i could open my windows partion while using fedora.
I created an archlinux vm guest using virtualbox on my windows desktop at work. I'm planning to use it for django development because there are no unix machines available to use as a workstation at work.
From the vm guest I can ping/ssh to other machines in the network, but not the other way around. It's like even though the guest machine has an ip address on the network and a hostname, neither is recognizable.
i have fedora 11 installed on my laptop. i used to run another linux flavor through virtual machine manager but it is giving error. i have just tried it with different flavors. i tired it with BACKTRACK, UBUNTU AND MINT(live cd) each time it gives error. last time i tried with QEMU type connection as loca installation media(iso). with the MINT iso it gave the error.
i am running now Windows 7 on a virtual machine.the windows of the VM remains small.when i resize the windows,, the desktop window of windows 7 remains the same size.is that normall?i would like to have a reasaneble windows size of the VM
I have some typical issue while trying to connect to my root or other users from my terminal.
like su - asking for password and after that it displyed a message like $su -
Password: could not open session
I tried connect using ssh then I am getting the following $ssh root@localhost Last login: Sun Nov 1 14:13:45 2009 from localhost Connection to localhost closed.
Background: Before this happended, I was tryied modify sshd_config in /etc/ssh/ folder to allow passwords less than 2 words.
I am triying install F14 virtual machine in my Windows XP systems. I have downloaded .iso file from fedoraproject.org: [URL] I create my virtual machine and I continue with all steps to install but when installation process finished and I reboot, process installation starts again. Can you tell me how I can create my F14 virtual machine on Windows?
Can I copy my virtual box VM windows XP virtual-machine files to another Linux computer and run the machine on that computer while I keep on running it on the original computer?
This question is about technical possibilities, not licences.
My company's default OS is Windows 7. I convinced my manager so that I could use Fedora 12, since I am mostly familiar with development environment in Fedora. However there are a few things I need in Windows 7, and I want to stop going back and forth in two OS'es in dual boot-up setting.
I've searched online for easy way to use the existing Windows 7 as guest virtual machine. I first tried VMware's Vcenter Converter Standalone in Windows 7, but it failed with some error code, and searching the particular error code didn't turn up any solution. I also tried to use Sun's VirtualBox, but I get segmentation fault error in Fedora. I tried to see if VMware server has a tool, but installation exists with an error, and searching the web for the error code didn't turn up anything either.... I wonder if I am having this much difficulties because I am using x86_64 version of OS'es.
Anyhow, if anyone has done it successfully - using existing Windows 7 as guest virtual machine in x86_64 version of Fedora 12.
Have you guys had this weird nautilus error? When I su to root and run "nautilus" in terminal, errors popped out:
Code: (nautilus:3979): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported(nautilus:3979): Eel-WARNING **: GConf error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
I have a Lenovo T500 laptop with 4 GB RAM. I have installed Windows 7 64bits OEM on my laptop HD. I also installed Fedora 14 on my USB External Hard Drive which it has it own boot sector. I don't want to have a dual boot. So if I plug in my external HD to my laptop and turns the machine on, it automatically my Fedora comes up, other wise my windows 7. (I set up start-up boot drive , first to USB External HD and then internal HD)
I installed KVM (Virtual Machine Manger) on my Fedora 14 and I am trying to install windows 7 64bits OEM on my Fedora 14 as Virtual Machine. After setting everything and start installing windows form CD, I got BLUE SCREEN right after "WINDOWS FILES LOADING..." finished. it shows me a blue screen and then it will stop
Questions:
1- How can I fix that problem? 2- Is ther way to make a Virtual Machine on my Fedora using my exiting installed windows 7 on my laptop HD?
I got the error: "An unrecoverable processor error has been encountered. The virtual machine will reset now." I have edited the options in installation screen with adding noreplace-paravirt at the end of boot parameters. but still have this error and FC installation does not continue.
I opted to install my Linux Fedora distribution, in a SUN VM (Virtualbox). [URL] I have 2 questions:
My current max res available to select is 1024x768. Can I run at 1920x1200? My display indicated that it is 'Unknown'. I don't know if that is in on the deal, or not...
Second question: When installing VBOXADDITIONS_3.1.2_56127, I am getting the error: Building the VirtualBox Guest Additions kernel modules [FAILED]
If I am displaying the log correctly, it indicates: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop Pictures are located here, in the EVGA Linux forum: [URL] I am new to both Linux, and Fedora.
My mission statement: To run Linux using the Fedora distribution, in a VM window under Windows 7 64bit Ultimate, with the ability for scripting using Bash, with the Perl programming language installed, and use Apache Tomcat to monitor both apps, and various VM installs, on numerous Servers via the internet.
I'm ssh'ed into a machine and logged in as a different user. Is it possible to open a few new windows that will still be ssh'ed into that same machine, still logged in as that user?
