Fedora :: Ssh Local Users Could Not Open Session Error
Nov 1, 2009
I have some typical issue while trying to connect to my root or other users from my terminal.
like su - asking for password and after that it displyed a message like $su -
Password: could not open session
I tried connect using ssh then I am getting the following $ssh root@localhost Last login: Sun Nov 1 14:13:45 2009 from localhost Connection to localhost closed.
Background: Before this happended, I was tryied modify sshd_config in /etc/ssh/ folder to allow passwords less than 2 words.
View 1 Replies
ADVERTISEMENT
Jun 6, 2011
When i try to create a virtual machine using the Windows 7 Enterprise Evaluation iso file, everything goes as planned untill i click on the start button. when i click on it i get two error messages. the first: Failed to open a session for the virtual machine Windows 7. The virtual machine 'Windows 7' has terminated unexpectedly during startup with exit code 1. Kernel driver not installed (rc=-1908). The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. i have installed the DKMS package, but when i try to run the command stated in the error message, i get another error message in the terminal:
[code]...
i have to install the driver that is specified (vboxdrv) but i do not know where to find it.
View 3 Replies
View Related
Feb 17, 2010
I have one Linux PC installed with Suse 11.1. In this I have created three users to get access.
Users able access their login from Windows PC via some utilities.
1. Putty
2. Xming
Users able login using both. With Putty there is no GUI. But with Xmings XLaunch they are able to get similar session as Linux Host PC. At this point of time the host linux PC will become too slow in perfarmance.
How to retrict the users not to open similar session by enablin/disabling some setting in Linux PC?
View 2 Replies
View Related
Jun 7, 2010
Is it possible to map a remote user to a local user in SSH? The object is to avoid using $ssh user@server and instead just do $ssh server instead.
View 4 Replies
View Related
Apr 11, 2010
The following message comes up when I boot up: Logging in user Warning: Cannot open ConsoleKit session: Unable to open session: Launch helper exited with unknown return code 0. When I press OK, the system completes the start up and everything looks normal. But when I try to connect to internet, I get the following message:
KNetworkManager cannot start because the installation is misconfigured. System DBUS policy does not allow it to provide user settings; contact your system administrator or distribution. KNetworkManager will not start automatically in future. If I reboot the system, I logg in successfully. So far the problem has appeared approximately upon every second time I boot up. Rebooting the system seems to take care of it.
Don't know what info is of interest. I'm using
Opensuse 11.2
KDE 4.4.2 (Factory)
After upgrade from 4.4.1 to 4.4.2 it worked fine for a week or so.
View 9 Replies
View Related
May 13, 2010
I do a clean install of slackware64 13.1 beta1 with KDE and switch default runlevel to 4 in /etc/inittab.
I try to login in kdm, I always come back to the login....
I try this with default runlevel 3 and an .xinitrc with "ck-launch-session startkde" .. works without problems, so I switch back to default runlevel 4, now i can login and only get the error "Cannot open ConsoleKit session: Unable to open session..."
Here are some logs
syslog
Code:
Code:
View 2 Replies
View Related
Mar 20, 2010
I am using Fedora 12 and i have enable XDMCP i have boot client with dhcp all is going well but when remote user logout than remote client display XDMCP: fatal error: Session declined Maximum number of open sessions. and after that i have reboot Fedora 12 server than it will work but after logout it will again create same problem.
View 1 Replies
View Related
Dec 31, 2010
My server (CentOS 5.5) is a ldap client authenticate to LDAP server (Successfully authenticate) I use pam for ssh. I can ssh successfully with any users on system. But I cannot su - from ssh. It display the error: Could not open session. I look to log file and it shows: # tail -f /var/log/secure
View 5 Replies
View Related
Jan 3, 2009
Has anybody been able to get NX (Nomachine) running on Fedora 10 configured using a shadow session of the local desktop (X11-local). I am experiencing some kind or cookie creation error, perhaps privilege related?
FYI. Normal unix-kde sessions work fine (e.g. Giant on Box) and shadow sessions of an existing unix-kde session works fine too. A shadow session of the local display is a bust.
Here's the error log:
Code:
NX> 203 NXSSH running with pid: 4076
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
[Code]....
View 14 Replies
View Related
Jun 25, 2010
After finally getting libptp2 to compile I find that ptpcam does not work. This has worked perfectly fine before with the same camera using Slackware 12.0, I am now using Slackware 13.1 and ptpcam will simply not work. The error is as follows:
Code:
x86_1# ptpcam -l
Listing devices...
bus/dev vendorID/prodID device model
ERROR: Could not open session!
Try to reset the camera.
I have tried to reset with "ptpcam -r", I have also tried to disconnect and reconnect the camera to the USB system, I have tried to reboot the computer, I have tried to use different versions of libptp2 -- all to no avail. The strace shows the issue is apparently a failed ioctl(), although I have no idea why it fails:
Code:
open("/dev/bus/usb/002/004", O_RDWR) = 6
write(4, "1"..., 1) = 1
read(3, "1"..., 1) = 1
[code]....
I have verified that the camera is working in Windows 7 on the same physical computer and I can see the camera from lsusb and dmesg output when I connect it to the USB system. This system is Slackware 13.1, Linux x86_1 2.6.33.4-smp #2 SMP Wed May 12 22:47:36 CDT 2010 i686 Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz GenuineIntel GNU/Linux.
View 1 Replies
View Related
Jul 26, 2011
I have a postfix mail server on ubuntu 10.04 lts behind a router. so all local users are fetching/sending mails through ms outlook using local IP. Sometimes when internet goes down and any mail send then it bounced back immediately saying domain not found. Can u please tell me how i configure to hold all mails in postfix server rather than bounce when internet fails and will pass through when restored the internet around 15-30 minutes?
View 2 Replies
View Related
Apr 8, 2010
This one made me scratch my head for a very long time
I want to give access to the sound device to all local users.
Currently only the user currently using the X11 system and root are able to use the sound hardware.
So it appears it's a problem of permissions but I couldn't figure where ...
View 2 Replies
View Related
May 27, 2011
how to map all domain users form group Domain Users to local group users (and maybe some more)? Im using Ubuntu 10.04 x32. Its connected to my domain using Samba and Winbind, I can login using my domain credentials, automatically map user folder form DFS server, but I think that domain users have too much priviledges in the system and want to restrict them as much as possible
View 2 Replies
View Related
Feb 1, 2010
Just installed Fedora 12 on a P4 IBM. Everything installed fine. Then, I rebooted, installed updates, and installed a few simple programs (emacs, ssh server). I rebooted since some kernel updates had been made. I can't login anymore. I get a brief message at GDM that says "unable to open session" after I enter my password. Root also doesn't work, but I figured out that root logins are disabled. I found something that recommended disabling selinux, so I reboot with selinux=0 parameter. That still didn't fix the problem, but did initiate selinux to re-label everything on the next boot.
My next thought was that maybe my password got corrupted, so I went into single usermode. I ran passwd justin, so I know that my password is correct. I still can't login via GDM or on a tty.
EDIT: I was also thinking I might need to uninstall something that I did; however, networking is disabled in single usermode, and if I init 3, then I get a login prompt that I can't open. Is there a way that I can enable root login? That might be a starting point to see if it's my user account or a general login problem.
View 4 Replies
View Related
Oct 31, 2010
My Fedora 12 box got that error after some updates on it.
I can login but it's prompting that error and everything will be a black space.
But still no good.
According to the log messages, the ConsoleKit session isn't initializing. I can't paste the logs here coz it's on another laptop.
I could think of just upgrading it to Fedora 13 but there's no way I can backup all of my files on it. Is it just safe to upgrade it?
View 1 Replies
View Related
Apr 21, 2010
I found 2 previous posts, one from 2005 and one from 2006. The 2005 post was not very helpful and the 2006 threads are not exactly what I was expecting. So I wanted to ask the question to be sure. I have already stood up the new fedora 12 server. The old server is also fedora 12. I need to migrate local users and sendmail mailboxes. In the past couple of years the environment was small enough to create a copy of the users and then have the users mail themselves, but I want to start migrating users/mailboxes properly.
On a unix level I am a jr admin, but I have extensive senior level experience as a windows engineer and network engineer. I do feel comfortable with using the unix command line, but usually operate the unix systems thru webmin because I am not familular with more complex commands. Ideally a software solution to migrate users and/or mailboxes from one server to another is what I am looking for, but in leiu of a software solution I still need to migrate user accounts and their mailboxes. LDAP is not in place, but if the process becomes easier with LDAP I am willing to do what is needed to set up LDAP. (I have no previous experience setting up LDAP)
I do not want to change my mail server from sendmail to different software. At least right now. Both systems are up and running. They can connect to each other via public ipv4 address' only. The new server has already been installed and configured with all the software to match the old server. How do I migrate users and sendmail mailboxes from one fedora 12 server to another fedora 12 server?
View 3 Replies
View Related
Aug 6, 2009
I coundn't log in fedora anymore. Everytime i try, i receive the report "unable to open session".
View 6 Replies
View Related
May 31, 2011
I am trying to install Fedora 14 or 15 into a 2008 R2 Hyper-V environment. I can successfully run the install and log into the system as a user. I need to install the integration components so the mouse works. However, I can't find a way to get a terminal window open so I can mount an .iso with the installers.
View 2 Replies
View Related
Dec 13, 2010
When I open startx it works fine bur I get an "cannot open display" error foe gnome-session. I already tried export DISPLAY=:0. ANY suggestions?
View 4 Replies
View Related
Jan 27, 2010
I have configured a squid proxy; it's running, but there was a problem: it does not provide service to client side.
The error was: "could not connect to session manager" "cannot open the network socket"
View 1 Replies
View Related
Sep 14, 2009
error message when I ran my program that I couldn't open my local file. I have two files first one is called client, second one is called server I am using named pipes to sent a message from client to the other file called server in client I used mknod() to create the two named pipes,one for read,one for write and created new thread in client using fork() spawned a child process that executed the server file both named pipes are opened the client file got the message from the user and sent it through the named pipes to the server file when the server receives the message , it needs to verfify it is correct in the server file, a local file descriptor is created to read and send this verifing message when it is not correct but I am getting an OPEN() error when I tried to open this shared local array buff and attach it to a file descriptor where the message is kept why do I get this error in server file
int main()
{
/*both named pipes are open*/
rfd=open(IFIO1,0);
wfd=open(IFIO2,1);
[code]....
View 1 Replies
View Related
Jul 9, 2011
Error: Cannot open log file '/usr/local/nagios/var/archives/nagios-07-08-2011-00.log' for reading!
View 2 Replies
View Related
Jan 28, 2011
When I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies
View Related
Nov 5, 2009
when I open this it opens up greyed out for a split second then closes.I started it in a console ,it did the same but the following was left in the terminal
Code:
[tytower@localhost ~]$ system-config-users
Traceback (most recent call last):
[code]...
View 2 Replies
View Related
Mar 28, 2011
My fedora 14 has OpenSSH_5.5p1, OpenSSL 1.0.0a-fips 1 Jun 2010 running. I am able to use putty to ssh to my fedora. I installed NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.3.0) but when i used nxclient to connect to the server i always got 'session x' failed.
[code]...
View 1 Replies
View Related
May 13, 2010
We have just installed VNC. It seems to work fine. If we connect to a remote system using VNC, on say DISPLAY 5, it works and we can run our applications. If another person wants to view this session, they can also connect to DISPLAY 5, and it is fine.
However, if you are just sitting at your own system, without using VNC, and someone connects to your system using VNC to DISPLAY 0, so you can show them what you are doing, they do not see your session, they see a plain startup session, not the session in which you are running your applications... How do you let VNC users see your normal non-VNC session? Have I configured something wrongly? We are new to VNC!
View 5 Replies
View Related
Oct 12, 2010
is that possible to have multiple users for one linux session? and how can i do that ? it's possible to creat virtual users for a session ?
View 2 Replies
View Related
Feb 27, 2009
I have installed open office 2.3 on my fedora system . I have also installed skim , m17 , fonts , im-chooser packages to support writing in my local indian language ( kannada is supported ) . But still i am not able to write in my local langauge
View 1 Replies
View Related
Apr 6, 2010
when i start my pc i have an error: Consolekit session error, unknown return code 0 when i click Ok it then starts my session
View 7 Replies
View Related
Dec 31, 2010
I have a slack 64 13.1 box, that I want to be able to control the monitor of from my laptop. Here's the scenario: I can already control the music remotely via X forwarding banshee to my laptop (banshee shows up on the laptop and music comes out on the desktop). Now I want to be able to open a movie on the desktop's display via the laptop.
Now googling this comes up with solutions for X forwarding, but I don't want it to forward X I want it to display on the desktop.
View 3 Replies
View Related
