Debian Hardware :: Fresh Jessie Install - Machine Doesn't Boot With PCIe WiFi

May 4, 2015

I recently finished a mini-itx machine and everything was working great with a fresh Jessie install. I put in a PCIe wifi card and now the computer won't boot. The power LED is on, the PSU fan is spinning, but I get no display output at all and I don't know how far into the boot process the thing even got. I removed the card and the machine boots fine again.

I only have one PCIe slot so it is my only option, I don't have another PCIe card to try, nor do I have another machine to test the wifi card in. The card is brand new, for what it's worth.

WiFi card: [URL] ....
motherboard: [URL] .....

View 1 Replies


ADVERTISEMENT

Ubuntu Networking :: PCIe-WiFi Module Doesn't Work?

Jul 9, 2010

Got notebook HP 6530b with Intel 5100AGN PCIe WiFi module in and desktop ubuntu 10.04 from [URL].

Can i make this one works any way exclude ndiswrapper.

lshw -c network
http://img695.imageshack.us/img695/1...eenshot2th.jpg
lspci
http://img819.imageshack.us/img819/1...reenshothy.jpg
uname -r
2.6.32-23-generic

View 1 Replies View Related

Debian :: Jessie Hangs / Freezes After Fresh Install

Dec 8, 2015

I installed Jessie day before yesterday on a freshly formatted partition. After a random time, it hangs. If I am playing music at the time, the music continues for a few more seconds _after_ the mouse and keyboard become unresponsive, if that is useful.

Sine I did not understand how to pick the desktop during the installation, I installed Gnome. Afterwards, I installed KDE. Now I have a lot of Gnome stuff around I don't really need. But they are in principle compatible, right?

This morning, the hang was almost immediate after logging on. Only Iceweasl and Amarok and a Konsole were running. I attempted to start Icedove, when everything hung.

Here is the relevant part of the syslog.

Dec 8 07:41:38 jon-desktop rsyslogd:
[origin software="rsyslogd" swVersion="8.4.2" x-pid="775" x-info="http://www.rsyslog.com"]
rsyslogd was HUPed
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^

[Code] .....

My clock said 07:41 at the time of the hang.

View 7 Replies View Related

Debian :: Debconf (dpkg - Reconfigure) On Fresh Jessie Install

Aug 15, 2015

I have a fresh install of Jessie, and am having issues with debconf.

I have been trying to change to mdm from the default lightdm display manager. I have downloaded and installed mdm (apt-get install mdm) but when I run dpkg-reconfigure mdm nothing happens. As I understand it, I should get a menu that lets me choose which display manager to use.

I also installed lirc so I could get my IR remote working again, but when I run dpkg-reconfigure lirc nothing happens. I am supposed to get a menu with various options to choose from.

I have tried dpkg-reconfigure debconf and this gives me the menu with different options to choose, like it should when trying dpkg-reconfigure lirc or dpkg-reconfigure mdm. I tried using dpkg-reconfigure debconf to choose different settings, such as gnome, or editor, but they don't work either.

View 3 Replies View Related

Debian Installation :: Fresh Jessie Install - Cinnamon Can't Start

Sep 17, 2014

I recently have started playing with various distros (Mostly just Zorin and Debian) and have been trying to find a GUI I can actually comfortably use without wanting to punch my screen. This lead me to cinnamon which looks like something I could actually use.

I performed a fresh installation of Debian Jessie without the desktop environment and print server (System Utilities or whatever that option is called was left checked) and after the system installed and booted I proceeded to login as the root and install cinnamon. Unfortunately afterwards my system would be nothing but a black screen with a box saying that cinnamon had crashed and was running in fallback mode.

However if I let a fresh installation install the default GUI of xfce and then perform the cinnamon installation, cinnamon will install and run. My question is why doesn't a clean install with cinnamon work but installing cinnamon after another gui does? I don't get any apparent error messages beyond cinnamon crashing and I'm still fairly new to Linux.

View 11 Replies View Related

Debian Installation :: No Bootable Device Jessie Fresh Install

Mar 5, 2016

I am having a problem with my new Toshiba Satellite Laptop... I had installed debian for some time but last week suddenly stopped working.

- the computer stopped working at all... nor bios access.
- I did a new bootable installation in USB drive and downloaded the latest debian iso from official website and created the bootable device via dd as usual.
- I installed the new debian but after I removed the usb drive in order to boot into my new system. I was taken to a screen saying "Start PXE over IPv6 -- Start PXE over IPv4 ..." I followed several links looking for a fix, and all of them lead me to disable network boot option in BIOS setup...
- I disabled but after that it appears a new message "No Bootable device -- Press restart system" and nothing happens from there.
- I have found info in Internet regarding this issue, but all I find is "windows related"
- Someone recommended me this: "The BIOS can no longer recognize the hard drive as a bootable device. This could be for a number of reasons. Your best bet, if it is still under warranty, is going to be to bring it back to where you purchased it"
- But instead, what I did was to create a new bootable device, this time containing XUBUNTU and installed it to the machine, I had the good news that the installation proceed without any problem, so I could figured out that my machine it is still alive...
- Back to my issue and hoping that something unexpected happened that fixed the machine, I got back and did a new Debian bootable device, also hoping that the latest was corrupted or something, but after reboot to my new system... the problem persisted again.
- I chose to have 1 partition in full disk.

Now I don't know what else to do... I don't like ubuntu, I have used debian for some years and I want to keep using it and I would not like to be forced to move to ubuntu or xubuntu for this.

View 14 Replies View Related

Debian Multimedia :: Can Put PCIE X16 Card In PCIE X1 Slot?

Jun 28, 2010

I have fairly new requirement for a second monitor. My main display is running fine using nvidia proprietary drivers.I do have a pcie (probably x16) video card sitting around, but my motherboard only has 1 x16 slot (used by my main display), 2 x1 slots and a few pci slots. From memory, the second video card is an ATI card.Questions:

1. Can I put a PCIE x16 card in a PCIE x1 slot?

2. Would using 1 Nvidia card and 1 ATI cause trouble?

View 5 Replies View Related

Debian Installation :: Cannot Boot Into Windows XP After Dual Jessie Install

Sep 4, 2015

I have a Dell laptop (inspiron 1150) which was dual booting Windows XP and Ubuntu 9.04. I have successfully installed Debian Jessie Standard over the Ubuntu. I pre-partitioned using gparted-live to make a separate single partition for the Debian install. Guided partitioning was then carried out by the installer producing separate /, /home, and swap partitions. After installation, the grub menu shows an entry for Debian and Windows XP. I can boot Debian, but not Windows XP. The symptoms are the same as reported in other forums: A terminal is displayed, vanishes and the system reboots defaulting to the Debian boot.

The grub.cfg file for the Jessie system has an other-os entry:

Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
   set root=(hostdisk//dev/sda, msdos2)
   search --no-floppy --fs-uuid --set=root cc0ce0ab0ce091ae
   drivemap -s (hd0) ${root}
   chainloader +1
}

The original Windows entry for the Ubuntu install was:

Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
   insmod ntfs
   set root=(hd0,2)
   search --no-floppy --fs-uuid --set cc0ce0ab0ce091ae
   drivemap -s (hd0) ${root}
   chainloader +1
}

The partitions produced by partman look OK (during the pre-partitioning I did not touch sda1, sda2, or sda3):

Code: Select all~ # fdisk -l
Disk /dev/sda: 37.3 GiB, 40007761920 bytes, 78140160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

[Code] .....

Partition table entries are not in disk order.

The os-prober found XP:

Code: Select all~ # os-prober
/dev/sda2:Microsoft Windows XP Home Edition:Windows:chain

So it seems that everything is in place, but there are perhaps important differences in the grub.cfg files. Are the two "set root" commands equivalent for example?

View 5 Replies View Related

Debian Installation :: New Jessie Install Black Screen On Boot (AMD Video)

May 14, 2015

I installed jessie amd64 lxde to a thumb drive to use with a laptop. Vanilla install using the amd64 lxde live cd. Upon booting the usb system, I am presented with a black screen with blinking cursor. No grub screen, no ability to type any commands and no ability to switch to another terminal. I tried booting into the live cd and I could get into the intro splash screen. Booting to the live system from there would also hang at a black screen.

However, using the kernel parameter "nomodeset" from the splash screen did allow the live system to boot to the desktop. I booted the live system, mounted the usb system and chrooted into it. I edited /etc/default/grub to include "nomodeset" in the GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX variables and then ran update-grub.

Upon reboot to the usb system the problem still occurred. The video card in question is a amd firepro 5800m which has an lspci line of mobile radeon 5000 series. This card was supported in wheezy and apparently works with the live system.

View 5 Replies View Related

Debian Installation :: Boot Hangs After Successful Fresh Install

Nov 24, 2015

System is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.

This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).

My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.

Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.

View 6 Replies View Related

Debian Installation :: After Jessie Upgrade No WiFi / IP Address

Feb 7, 2016

I upgraded my laptop from Debian Wheezy to Jessie the other day, and just as before my wifi auto-connects to my router, and I can "ping http://www.google.com" just fine, but only for like a minute. Then the Internet access dies, but I'm still connected fine to my router, and I can ping its IP address. If I connect to the router through cable / eth0 everything works just fine, and I have full Internet access.

I assume there is something wonky with how ip address is assigned after the upgrade, how can I fix this, or trouble shoot further?

(I run Gnome desktop, with network manager).

View 10 Replies View Related

Debian Hardware :: WiFi Printer Is Not Working After Upgrade To Jessie

Sep 22, 2014

A couple of days ago I followed a guide online in order to install Adobe Reader and this guide recommended a specific package that needed the jessie repository, I added it (unaware the jessie was the name of the new distribution on testing) and so I found myself upgrading to Jessie, which is fine since is working quite alright, but since then I can't sent any document to my wi-fi printer.

I had no problem with Wheezy, I installed two printers: one connected to the usb interface and the other one to the wifi (but is actually the same). With Jessie when I try to print something and select the wi-fi one nothing happens. If i try to add a new one I can't since debian doesn't find it and I can't even delete the old "malfunctioning" one.

View 1 Replies View Related

Debian Installation :: Ralink WiFi Stopped Working After Jessie Upgrade

Dec 23, 2015

On install my wifi was working, but when I rebooted it stopped working.Since then I've tried numerous things to attempt recovery of wifi. No luck so far.

View 14 Replies View Related

Debian Hardware :: Installed Jessie On Asus T200TA - WiFi Isn't Recognized

Sep 9, 2015

I installed debian jessie on my asus T200TA but wifi isn't recongnized

I nevertheless followed the same steps as for installation on asus T100TA on debian wiki.

[URL] ....

View 14 Replies View Related

OpenSUSE Wireless :: Fresh 11.2 Install - Wifi And Dhcp?

Dec 23, 2009

I just did a fresh install of 11.2 on my Thinkpad (previously running 11.1) and am having trouble with getting wifi to work properly. My wireless will not connect reliably. Sometimes it connects after reboot but then drops and will not reconnect. Below in line 4 of the status query you can see that it says DHCP4 client NOT running.

ifstatus wlan0 wlan0 device: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) DHCP4 client NOT running wlan0 is up 5: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:13:02:4e:66:38 brd ff:ff:ff:ff:ff:ff
Configured IPv4 routes for interface wlan0:
default 192.168.1.1 - -

[Code]...

View 9 Replies View Related

Ubuntu :: WiFi Not Working On Fresh Install Of 11.04 (32bit)

Sep 1, 2011

I just got done with a fresh install of 11.04. So far I like the new update and face lift. The only thing I do not like is that I can not use my laptops WiFi I have a Compaq Presario V5101US. Below info is from doing lspci command in the terminal...

Code:
Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

View 9 Replies View Related

Debian Hardware :: Intel AC 7260 WiFi Not Work In Jessie LXDE With Wicd

Feb 5, 2015

My wifi does not work in the actual debian testing jessie lxde amd64 with wicd version (fresh install). What I've done:

0. Fresh testing jessie install (offline and ignored the question for adding iwlwifi)

1. Adding following sources:
deb http://ftp.de.debian.org/debian/ jessie main contrib non-free
deb-src http://ftp.de.debian.org/debian/ jessie main contrib non-free
deb http://security.debian.org/ jessie/updates main contrib non-free
deb-src http://security.debian.org/ jessie/updates main contrib non-free

2. apt-get update

3. apt-get install firmware-iwlwifi

4. modprobe -r iwlwifi ; modprobe iwlwifi

So searching the web just brings up the wheezy way solution (backport new kernel and iwlwifi).

But in this case, actual jessie testing kernel is already installed by default and so the actual 43 firmware-iwlwifi

Some information:
Code: Select all# dpkg -l |grep -i iwlwifi
ii  firmware-iwlwifi                      0.43                              all          Binary firmware for Intel Wireless cards

Code: Select all# dmesg | grep wifi
[    7.890216] iwlwifi 0000:02:00.0: irq 107 for MSI/MSI-X
[    8.478878] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7260-9.ucode
[    8.479867] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[    8.553105] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[    8.553193] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled

[Code] ....

I must add: lxde Debian uses Wicd, so network-manager is not installed !

Wicd seems to be the problem. After changing to network-manager, everthing is ok.

Next install with the official Jessie release, i will look, why wicd not work out of the box.

View 5 Replies View Related

Fedora Networking :: Broadcom BCM4310 - No Wifi After Fresh Install

Jun 27, 2009

I have had a search around, any cannot find any thing I can make sense of as to how I go about getting the above card to work with Fedora 11. Just done a fresh install (need Linux for some development) but have no wifi. My chipset is this Broadcom BCM4310. There seems to be a whole load of options, and I don't know which works and which don't:

kmod-wl
broadcom-wl
ndiswrapper

I can sit with an Ethernet cable to install/update as necessary, but really could do with wireless.

View 3 Replies View Related

Ubuntu Installation :: WiFi Is Not Working On A Fresh Install Of 11.04 (32bit)?

Sep 1, 2011

I just got done with a fresh install of 11.04So far I like the new update and face lift. The only thing I do not like is that I can not use my laptops WiFi I have a Compaq Presario V5101USBelow info is from doing lspci command in the terminal.Code:Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

View 2 Replies View Related

Debian Multimedia :: VNC Doesn't Work Well With Many Jessie DEs

Dec 29, 2014

I'm trying out a Jessie install and have noticed VNC doesn't work as well as it used to. I often install a desktop environment on a headless machine, disable *dm, and use vnc4server to create a desktop session if I want to use a GUI. When I try to do the same on Jessie, I run into problems.

Using Gnome, all I get is the generic "Oops something went wrong" error. Looking at .xsession-errors, there are some errors that hint at the problem.

Code: Select allXsession: X session started for ryan at Mon Dec 29 06:07:30 CST 2014
X Error of failed request:  BadValue (integer parameter out of range for operation)
  Major opcode of failed request:  109 (X_ChangeHosts)
  Value in failed request:  0x5
  Serial number of failed request:  6
  Current serial number in output stream:  8

[Code] ....

Some possibly related bugs: [URL] ...

The same thing seems to happen with Cinnamon. Since I doubt a fix for the above issue will make it into Jessie, I tried XFCE. However, that doesn't work correctly either. When running XFCE via VNC something is misreporting the version of xrandr as 1.1 instead of 1.4. Since xfsettingsd appears to want version 1.2+, many things are broken.

This post on the Ubuntu forums suggests the issue might be fixed in xfsettingsd version 4.11: [URL] .....

Is there a better way of getting a remote desktop in Jessie that I'm overlooking?

View 0 Replies View Related

Hardware :: Intel D945GCPE Doesn't Boot Fresh Installation?

May 25, 2010

My Intel D945GCPE doesn't boot fresh installation of Linux after "under Warranty Replacement" of it. I have tried to install Fedora 9,10, RHEL 5, Zenwalk on dual boot with windows Xp. i.e. First Win XP then Linux.

The Linux Install perfectly but when i reboot after the installation, BIOS tries to detect PXE boot. I have both custom partitioning scheme and Auto-Partitioning on Free unpartitioned space. I have tried this 5 times with the aforesaid distributions, but failure!

In fact I have done the same number of times even earlier but before Board Replacement. Board works perfectly with Win Xp, and 2008 Server.

System Configuration:

Core2Duo 2.2
2 GB RAM
Intel D945GCPE MotherBoard (Replaced)

View 3 Replies View Related

Debian Configuration :: BCM4313 802.11bgn Doesn't Work In Jessie

Mar 27, 2016

Debian configurating, so I try to use wifi adapter, but it doesn't work. I have installed Debian Jessie from netinst CD. To reach perfect speed no options were selected. After I installed xfce4 and xfce4-goodies.I follow some different instructions and no dice. Wicd show me no avalable wifi connections. used Ubuntu 14, Ubuntu 12, etc. and I didn't have any problems with wi-fi connections. Some outputs of comands...

Code: Select allsatyva@meliorD:~$ cat /etc/debian_version
8.3
Code: Select allsatyva@meliorD:~$ lspci | grep 4313
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)

[code]....

View 4 Replies View Related

Debian Multimedia :: Japanese Input In Jessie Doesn't Seem To Work

Jan 19, 2014

I've tried installing both ibus-anthy and ibus-mozc in Jessie but I still cannot input Japanese.

By contrast, In Wheezy, when using anthy for example, I can see ibus preferences icon where I can configure ibus and anthy. This doesn't show up in Jessie.

View 12 Replies View Related

Debian Multimedia :: 8.0 Jessie - Volume And Fn Keys Doesn't Work

Mar 30, 2015

I recently install a Debian 8.0 Jessie on a Laptop Dell latitude E6540 with gnome 3.14+3. But the problem is that it doesn't recongnize my multimedia buttons, I tried some methods but I didn't get results.

Code:
Code: Select all$showkey --scancodes
volume up   -- 0xe0 0x30 0xe0 0xb0
volume down -- 0xe0 0x2e 0xe0 0xae
volume mute -- 0xe0 0x20 0xe0 0xa0

$showkey --keycodes
volume up   -- 115
volume down -- 114
volume mute -- 113

[Code] ....

When I reassinged the keys on Settings>Keyboard>Shortcuts to F7, F8 and F9 it works, but when use the keys volume up, down and mute It doesn't show anything.

The same happens with Fn + Brightness keys, in this case it worked the first time but then stop to work I don't know why..

View 5 Replies View Related

Debian Multimedia :: Jessie - LXDE Doesn't Shutdown Properly

May 19, 2015

I know the problem has been partly solved in this old thread [URL] .....

Now we have Jessie as stable, yet LXDE doesn't shutdown properly:

On the same computers, Wheezy LXDE shut down very fast

I installed Jessie from the netinstall image.

On a 2007 computer, it's like the old days with a Pentium II running some version of Puppy Linux or Slitaz. The system shuts down after a while but the computer remains on.

On a 2013 laptop, I added the line init=/bin/systemd in the Grub default file as advised on the old thread above. The laptop shuts down after a while, the system first, then the hard disk goes to sleep, then all the leds are off.

If I run the magic command, the computer shutdowns in a breeze, perhaps even quicker than good old Wheezy:

Code: Select all# systemctl poweroff

Now, is this still a systemd bug? Doesn't look like it since the systemctl command works. Is it an LXDE bug? Looks like it in a way - if the LXDE shutdown button enabled the systemctl poweroff command, I suppose the button would work?

Is there a way to make the LXDE shutdown button run the systemctl poweroff command?

I'm glad Wheezy is still with us because I wouldn't install Jessie for newbies — they'd think shutdown (through clicking on a button) is even worse than in Windows.

View 2 Replies View Related

Ubuntu Networking :: Wifi Was Working From Fresh Install But Would Drop Out Often And Sometimes Freeze Laptop Resulting In Hard Reset?

Apr 20, 2010

Using karmic on acer aspire 5332.Wifi was working from fresh install but would drop out often and sometimes freeze laptop resulting in hard reset.Installed Ndiswrapper to try wireless drivers unfortunately i can't get them to work. How can i revert back to original ubuntu drivers?

View 1 Replies View Related

Debian :: Jessie 8 Update - Boot Grub Shows Now 2 Kernel Versions To Boot From

May 2, 2015

After some updates Jessie 8 my boot grub shows now 2 kernel versions to boot from.

3.16.0-4-amd64
3.16-3-amd64

- How do I know which one is the newest and if happy with it, how to remove the older one?

View 9 Replies View Related

Debian Multimedia :: Nvidia-settings Doesn't Save Across Reboots - Jessie 64bit

Dec 12, 2015

I had some issues with nvidia drivers, and removed all of the packages using

Code: Select allrm /etc/X11/xorg.conf and Code: Select allapt-get purge nvidia*

Upon reboot, I was back with nouveau drivers and proceeded to reinstall nvidia drivers according to [URL] .....

Code: Select allapt-get install nvidia-driver
apt-get install nvidia-xconfig
I can then change my refresh rate using
Code: Select allnvidia-settings
but when I hit "Save to X configuration file", I get the following output in terminal:
Code: Select allroot@debian:/home/anon# nvidia-settings
Package xorg-server was not found in the pkg-config search path.
Perhaps you should add the directory containing `xorg-server.pc'
to the PKG_CONFIG_PATH environment variable
No package 'xorg-server' found

As a result, my nvidia preferences aren't saved across reboot.

Here are all of my sources:
Code: Select alldeb [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam
deb-src [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam

deb http://ftp.ca.debian.org/debian/ jessie non-free contrib main   
deb-src http://ftp.ca.debian.org/debian/ jessie non-free contrib main 

[Code] ....

System Specs:
Debian GNU/Linux 8 (jessie) 64-bit
Gnome Version 3.14.1
Processor: Intel® Core™ i7-4770K CPU @ 3.50GHz × 8
Graphics: GeForce GTX 780/PCIe/SSE2

View 6 Replies View Related

Debian Hardware :: Brother Label Printer QL 1060N Doesn't Work / Cut Under Jessie

Oct 8, 2015

I am trying to get the QL1060N to print and cut under Jessie.

I used the Ql1060N on wheezy (cups 1.5.3) with the standard Brother driver and the ptouch/foomatic driver of the QL550. They both worked out of the box.

Configuration for Brother QL1060N Driver:
Description:ql1060n
Location:
Driver:Brother QL-1060N CUPS v1.1 (grayscale, 2-sided printing)
Connection:socket://XXX:9100

[Code] ....

On Jessie (cups 1.7.5):
I first tried the standard Brother driver from here: [URL] ....It didn't work at all. When I print, Cups tells me that the job has been completed, even though nothing has been done. Sometimes I also got the error "job canceled, filter failed", but I can't reproduce this error...

The foomatic/ptouch driver for the QL550 prints like it did before, but doesn't cut the lables automatically like it used to in wheezy. (I'm using the same printing file/picture as in wheezy and also the same configuration.)

View 1 Replies View Related

Fedora Installation :: X Doesn't Start On Fresh Install (x64)

Jul 31, 2009

I just downloaded the F11 x64 DVD iso, and I when I try to install it, after the media check screen, Anaconda starts it load, but it says "X failed to start, falling back to text mode" (or something like that).
The install goes through (in text mode), and all that gets installed is the basic environment.

My specs:
- AMD X2 Phenom II 550 Callisto
- 4gb DDR2 800 memory
- 1tb Samsung SATA / 100gb Western Digital SATA
- 2x XFX Geforce 9600gt 1gb
- ASRock K10N780SLIX3-WIFI motherboard

I've tried Ubuntu x86 on the same system, but I was having issues with it, so I decided to try FC11 instead.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved