Debian Installation :: Fresh Jessie Install - Cinnamon Can't Start
Sep 17, 2014
I recently have started playing with various distros (Mostly just Zorin and Debian) and have been trying to find a GUI I can actually comfortably use without wanting to punch my screen. This lead me to cinnamon which looks like something I could actually use.
I performed a fresh installation of Debian Jessie without the desktop environment and print server (System Utilities or whatever that option is called was left checked) and after the system installed and booted I proceeded to login as the root and install cinnamon. Unfortunately afterwards my system would be nothing but a black screen with a box saying that cinnamon had crashed and was running in fallback mode.
However if I let a fresh installation install the default GUI of xfce and then perform the cinnamon installation, cinnamon will install and run. My question is why doesn't a clean install with cinnamon work but installing cinnamon after another gui does? I don't get any apparent error messages beyond cinnamon crashing and I'm still fairly new to Linux.
View 11 Replies
ADVERTISEMENT
Mar 5, 2016
I am having a problem with my new Toshiba Satellite Laptop... I had installed debian for some time but last week suddenly stopped working.
- the computer stopped working at all... nor bios access.
- I did a new bootable installation in USB drive and downloaded the latest debian iso from official website and created the bootable device via dd as usual.
- I installed the new debian but after I removed the usb drive in order to boot into my new system. I was taken to a screen saying "Start PXE over IPv6 -- Start PXE over IPv4 ..." I followed several links looking for a fix, and all of them lead me to disable network boot option in BIOS setup...
- I disabled but after that it appears a new message "No Bootable device -- Press restart system" and nothing happens from there.
- I have found info in Internet regarding this issue, but all I find is "windows related"
- Someone recommended me this: "The BIOS can no longer recognize the hard drive as a bootable device. This could be for a number of reasons. Your best bet, if it is still under warranty, is going to be to bring it back to where you purchased it"
- But instead, what I did was to create a new bootable device, this time containing XUBUNTU and installed it to the machine, I had the good news that the installation proceed without any problem, so I could figured out that my machine it is still alive...
- Back to my issue and hoping that something unexpected happened that fixed the machine, I got back and did a new Debian bootable device, also hoping that the latest was corrupted or something, but after reboot to my new system... the problem persisted again.
- I chose to have 1 partition in full disk.
Now I don't know what else to do... I don't like ubuntu, I have used debian for some years and I want to keep using it and I would not like to be forced to move to ubuntu or xubuntu for this.
View 14 Replies
View Related
Dec 8, 2015
I installed Jessie day before yesterday on a freshly formatted partition. After a random time, it hangs. If I am playing music at the time, the music continues for a few more seconds _after_ the mouse and keyboard become unresponsive, if that is useful.
Sine I did not understand how to pick the desktop during the installation, I installed Gnome. Afterwards, I installed KDE. Now I have a lot of Gnome stuff around I don't really need. But they are in principle compatible, right?
This morning, the hang was almost immediate after logging on. Only Iceweasl and Amarok and a Konsole were running. I attempted to start Icedove, when everything hung.
Here is the relevant part of the syslog.
Dec 8 07:41:38 jon-desktop rsyslogd:
[origin software="rsyslogd" swVersion="8.4.2" x-pid="775" x-info="http://www.rsyslog.com"]
rsyslogd was HUPed
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^
[Code] .....
My clock said 07:41 at the time of the hang.
View 7 Replies
View Related
Aug 15, 2015
I have a fresh install of Jessie, and am having issues with debconf.
I have been trying to change to mdm from the default lightdm display manager. I have downloaded and installed mdm (apt-get install mdm) but when I run dpkg-reconfigure mdm nothing happens. As I understand it, I should get a menu that lets me choose which display manager to use.
I also installed lirc so I could get my IR remote working again, but when I run dpkg-reconfigure lirc nothing happens. I am supposed to get a menu with various options to choose from.
I have tried dpkg-reconfigure debconf and this gives me the menu with different options to choose, like it should when trying dpkg-reconfigure lirc or dpkg-reconfigure mdm. I tried using dpkg-reconfigure debconf to choose different settings, such as gnome, or editor, but they don't work either.
View 3 Replies
View Related
May 4, 2015
I recently finished a mini-itx machine and everything was working great with a fresh Jessie install. I put in a PCIe wifi card and now the computer won't boot. The power LED is on, the PSU fan is spinning, but I get no display output at all and I don't know how far into the boot process the thing even got. I removed the card and the machine boots fine again.
I only have one PCIe slot so it is my only option, I don't have another PCIe card to try, nor do I have another machine to test the wifi card in. The card is brand new, for what it's worth.
WiFi card: [URL] ....
motherboard: [URL] .....
View 1 Replies
View Related
Jul 31, 2009
I just downloaded the F11 x64 DVD iso, and I when I try to install it, after the media check screen, Anaconda starts it load, but it says "X failed to start, falling back to text mode" (or something like that).
The install goes through (in text mode), and all that gets installed is the basic environment.
My specs:
- AMD X2 Phenom II 550 Callisto
- 4gb DDR2 800 memory
- 1tb Samsung SATA / 100gb Western Digital SATA
- 2x XFX Geforce 9600gt 1gb
- ASRock K10N780SLIX3-WIFI motherboard
I've tried Ubuntu x86 on the same system, but I was having issues with it, so I decided to try FC11 instead.
View 7 Replies
View Related
Dec 4, 2014
I have been building a debian jessie system reasonably successfully but have come unstuck with libpam-mount. On a previous Ubuntu saucy system I simply installed it, created the appropriate pam_mount.conf.xml file and mounts would happen when users logged on and dismount on logoff. With jessie I can see that there is a libpam-mount package in main but when I try apt-get install it fails. If this package has been obsoleted (as one of the messages indicates might be the issue) what is the jessie way of handling this?
Here is my sources.list
Code: Select alldeb http://mirror.aarnet.edu.au/debian/ jessie main non-free contrib
deb-src http://mirror.aarnet.edu.au/debian/ jessie main non-free contrib
[code]....
View 3 Replies
View Related
Mar 7, 2015
I installed Jessie with the RC1. URL...A2) The network install images for testing (jessie) can be found at URL...However, unless you want to test the installer for testing the better choice is to use the stable installer to install a minimal stable system and then upgrade to testing by changing your /etc/apt/sources.list file.
View 8 Replies
View Related
Jul 20, 2015
Somehow got it partly to work. I have a new installation and I am using the 4.1 kernel now. I can switch on the Radeon chip which is great, but still have some trouble when trying to turn it completely off.
I have an Acer Aspire 4820TG Laptop with:
Core: i7-640M
integrated graphics: Intel
discrete graphics: Radeon Mobility 5650HD
I have installed Debian Jessie. After installing the non-free firmware for my ATI chip (following [URL] .....) so I could use vgaswitcheroo, the system broke.
The problem looks as follows: When I start the system the graphical login screen gets stuck and the console tells me first:
Code: Select allradeon 0000:01:00.0: Userspace still has active objects!
then a lot of numbers, then
Code: Select allradeon 0000:01:00.0: ring 5 stalled for more than 10000 msec
[drm:uvd_v1_0_ib_test] *ERROR* radeon: fence wait failed (-35).
[drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on ring 5 (-35).
and this repeats once (or twice?) until several new messages arrive.
Those pause at
Code: Select allFixing recursive faul but reboot is needed !
Then again lots of more error messages until the everything freezes, with the last message
Code: Select all---[ end trace 13dfd971ff8e0aed]---
(Might contain typos. I don't know how to get the whole messages since the system dies a minute after booting and I only have a few seconds after the error messages start)
Even when I prevented the xserver from starting at boot I still got the same problems.
I would very much like to be able to switch between my chips, because I can only use external monitors when the ATI chip is active, but I would also like to be able to use the battery saving internal chip option.
I also tried to install the proprietary driver (though I would prefer if I didn't have to do that), but I couldn't get the xserver to work while it was installed.
lscpi output:
Code: Select all00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
[Code] ....
View 5 Replies
View Related
Jan 25, 2016
Musescore 2.0 is available but only for Sid, I have just installed Jessie since I wanted the stable version. I was wondering if it was possible to install that packaged only from the sid distribution on jessie. How should I proceed?
View 9 Replies
View Related
Mar 19, 2016
I have noticed that when installing Jessie, the graphical installer downloads updates to packages while installing if connected via Ethernet to the Internet. Remaining disconnected solves this problem. Is there any way to avoid this and install without downloading files other than apt lists?
View 3 Replies
View Related
Feb 26, 2010
I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies
View Related
Sep 4, 2015
I have a Dell laptop (inspiron 1150) which was dual booting Windows XP and Ubuntu 9.04. I have successfully installed Debian Jessie Standard over the Ubuntu. I pre-partitioned using gparted-live to make a separate single partition for the Debian install. Guided partitioning was then carried out by the installer producing separate /, /home, and swap partitions. After installation, the grub menu shows an entry for Debian and Windows XP. I can boot Debian, but not Windows XP. The symptoms are the same as reported in other forums: A terminal is displayed, vanishes and the system reboots defaulting to the Debian boot.
The grub.cfg file for the Jessie system has an other-os entry:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
set root=(hostdisk//dev/sda, msdos2)
search --no-floppy --fs-uuid --set=root cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The original Windows entry for the Ubuntu install was:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
insmod ntfs
set root=(hd0,2)
search --no-floppy --fs-uuid --set cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The partitions produced by partman look OK (during the pre-partitioning I did not touch sda1, sda2, or sda3):
Code: Select all~ # fdisk -l
Disk /dev/sda: 37.3 GiB, 40007761920 bytes, 78140160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code] .....
Partition table entries are not in disk order.
The os-prober found XP:
Code: Select all~ # os-prober
/dev/sda2:Microsoft Windows XP Home Edition:Windows:chain
So it seems that everything is in place, but there are perhaps important differences in the grub.cfg files. Are the two "set root" commands equivalent for example?
View 5 Replies
View Related
May 1, 2010
I have a new hard-drive and have installed squeeze using CD 1. As my mobile broadband is the only way I can connect to the internet, how do I get it working on a fresh install?
View 5 Replies
View Related
Aug 27, 2010
I just downloaded the Debian (Squeeze) businesscard 'netinst' ISO and every time I attempted to run an install, I keep getting the following error:http://yfrog.com/ngdeberrorp
View 3 Replies
View Related
May 14, 2015
I installed jessie amd64 lxde to a thumb drive to use with a laptop. Vanilla install using the amd64 lxde live cd. Upon booting the usb system, I am presented with a black screen with blinking cursor. No grub screen, no ability to type any commands and no ability to switch to another terminal. I tried booting into the live cd and I could get into the intro splash screen. Booting to the live system from there would also hang at a black screen.
However, using the kernel parameter "nomodeset" from the splash screen did allow the live system to boot to the desktop. I booted the live system, mounted the usb system and chrooted into it. I edited /etc/default/grub to include "nomodeset" in the GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX variables and then ran update-grub.
Upon reboot to the usb system the problem still occurred. The video card in question is a amd firepro 5800m which has an lspci line of mobile radeon 5000 series. This card was supported in wheezy and apparently works with the live system.
View 5 Replies
View Related
Nov 24, 2015
System is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.
This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).
My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.
Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.
View 6 Replies
View Related
Dec 31, 2010
I've installed a fresh Debian amd64 DVD version on my small HP Compaq 6537s / AMD Athlon X2 / 64. Everything went fine, I rebooted, the graphical login screen appeared, so I thought I will be able at last to run Debian on a computer ...
But then after login, the login Window disappeared, the "Debian" logo too, and... that's all folks! A nice blank screen. But the mouse is still perfectly drawn, so it's kind of weird.
Here's what tells me "uname -a" :
Linux olivierdebian 2.6.26-2-amd64 #1 SMP Sun Nov 21 09:17:22 UTC 2010 x86_64 GNU/Linux
If I go to CTRL-ALT-F1, i login as root and I do a "/etc/init.d/gdm restart", I have the login screen back and this is once again the same scenario: login => ok => blank screen with mouse properly drawn and the Debian background color still there.
View 2 Replies
View Related
Aug 22, 2015
X won't start (awesome WM) after upgrading to jessie. It seems to startup up, then just stops. I'm running startx from the command line after logging in. The xorg log (bottom) looks good and I see an exit code of zero.
I do see this in sysout:
Code: Select alldebian xf86TokenToOptinfo: table is NULL
Googled around but I can't find anything specific on this one.
I'm not using any xorg.conf, as booting into a linux rescue cd everything works ok
Code: Select all[ 2275.960]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 2275.960] X Protocol Version 11, Revision 0
[ 2275.960] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 2275.960] Current Operating System: Linux jj 3.14.25 #1 SMP Fri Dec 5 10:17:33 EST 2014 x86_64
[Code] .....
View 2 Replies
View Related
Sep 8, 2015
I'm trying to upgrade my Win8/Wheezy 64-bit machine to Jessie 8.1 by installing from the amd64-bit netinstall iso image on a USB flash drive. I had done the previous, Wheezy, install on a disk partition that was whole-partition LUKS/LVM drive, with separate logical partitions for swap, root, and home.
Before doing the upgrade, I booted to the BIOS to ensure that my UEFI system had the correct, CSM and Legacy modes enabled in it, so that installer would boot using the non-efi BIOS mode.
Step one of the upgrade was to boot the netinstall and enter the rescue mode so that I could manually do the cryptsetup/LVM business. When I returned to the installer, I mounted the now-recognized logical partitions normally, choosing to format only the swap and / partitions.
During the entire process, I had to go into rescue mode one more time to manually mount the unencrypted /boot partition, along with my /home partition. I copied a backup of my old /etc/crypttab from the latter, and after returning to the installer, finished the install. That finish included installing grub on my hard drive's main boot partition.
Everything seemed to finish with no problems. However, when I try to boot the debian bootloader, I get tossed to grub rescue with the message that '/grub/x86_64-efi/normal.mod' doesn't exist. At this point I returned to the installer, mounted the /boot partition, and saw that there grub-install didn't create that an x86_64-efi directory at all. Instead, it had created an i386 directory. The exact name escapes me at the moment.
I *think* that my install was clean other than the last bit that was related to installing the bootloader. How to reinstall the bootloader in such a way as to make all of this work.
View 2 Replies
View Related
Jul 25, 2014
I am currently trying out Debian in VMware Player and I installed it using the following method.
Image Used: Debian-7.6.0-amd64-netinst
In the check list where it lets you select Debian Desktop, Print Server, and System Utilities I think it was? I deselected everything.
After Debian installed and rebooted I logged in, elevated myself to su, and entered the following commands.
apt-get update
apt-get install kdm kde-plasma-desktop --no-install-recommends
reboot
startkde
and I get the error '$DISPLAY is not set or cannot connect to the X server.'
View 8 Replies
View Related
Jul 26, 2014
I have a VIA Epia M 5000 system with 2 western digital 1TB NAS SATA drives connected through SATA<->IDE adapter. Everything installs and writes as expected except... grub. It never boots, after a message 'Grub loading' I always get 'error: no such disk'. I've tried numerous times and has been attemping to fix the issue for the past 2 days.
/dev/sda
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect, logical partition
/dev/sdb exactly the same
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect
/dev/md0
RAID1 of /dev/sda1 and /dev/sdb1
marked as ext4, boot point /
/dev/md1
RAID1 of /dev/sda5 and /dev/sdb5
marked as swap
update-grub2 in rescue mode generates grub.cfg with SET root=/mduuid/UUID_OF_SDA1
then after that there's search --no-floppy etc --set root=/mduuid/UUID_OF_MD0
I'm writing this from memory but simply the two uuids are different. Is this correct? I get those UUIDs to compare from blkid. All partitions are marked as bootable. grub-install /dev/sda and grub-install /dev/sdb produces no errors. grub-install /dev/md0 does not work, complains about superblocks or something similar.
Grub.cfg file contains insmod raid mdraid1x and similar lines, so that should be ok. Grub drops to rescue mode with message error: no such disk. Not device, but disk. Google finds many results for 'no such device' error, but I am not getting that error. 'ls' produces
(hd0) (hd0,msdos1) (hd1) (hd1,msdos1) ls ANY_VALID_PATH produces empty newline being printed, nothing more.
setting prefixes manually does not work, with error message 'error: file not found'. ls (hd0,msdos1)/boot/grub also produces empty line being printed. Rescue CD and auto-assemble of md0 and md1 works, the files are there, everything okay, except grub.
View 3 Replies
View Related
Apr 27, 2015
I initially installed Debian 8 onto my iMac G5 (with KDE), and it would boot to a black screen. I then tried again, and reformatted+reinstalled with only "Standard system utilities", "Print server", and "SSH server".The boot hangs before I get to a log-in prompt. Please see the attached log files I pulled off by booting from the rescue CD option. (I got an error when attaching the log files, so I used tinyupload to upload the files.URL....
Here's some of "syslog"
Code: Select allApr 27 17:37:45 iMacG5 systemd[1]: Started System Logging Service.
Apr 27 17:37:45 iMacG5 kernel: [ 13.137638] Unable to handle kernel paging request for data at address 0x00000008
Apr 27 17:37:45 iMacG5 kernel: [ 13.137645] Faulting instruction address: 0xd000000002314488
Apr 27 17:37:45 iMacG5 kernel: [ 13.137654] Oops: Kernel access of bad area, sig: 11 [#1]
[code]...
View 1 Replies
View Related
Nov 28, 2015
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
View 7 Replies
View Related
Sep 2, 2010
Every where I look online, people are posting ridiculous non-working ways to upgrade their system from one release to another--they do not work for me and I need a definite expert reply. I am working with a fresh install of Debian Lenny/Stable and wish to upgrade to the frozen Squeeze distribution. Supplementing the word "squeeze" in place of "lenny" in my sources.list file does not work and believe this to be an inappropriate way of upgrading. I have tried upgrading apt, dpkg, and aptitude before beginning the upgrade process, cleaning dpkg cache, rebooting, etc.
After updating the above packages I tried all methods of upgrading: safe-upgrade, full-upgrade, and dist-upgrade. All produce dependency problems and try to remove the gnome-desktop package or upgrade everything else except gnome-desktop. (Other packages are also affected, gnome-desktop is the most important in this instance). As I understand it, when upgrading you can comment out the volatile repositories as well as the security updates, is this correct?--either way I have tried countless combination's off commenting/uncommenting to try to get the needed results. I do not want use sid repos or reinstall.
View 14 Replies
View Related
Jul 25, 2014
I have just did a fresh install debian jessie today in virtualbox, the X window manager is fxce. By default the default runlevel is 5, and I tried to change the /etc/inittab content:
Code: Select allid:3:initdefault:
and reboot, but it didn't effect to the result, the X-window auto loaded again >.<
I need to change it that will boot in to console mode first, and can run startx if necessary, how can I change it permanently?
View 7 Replies
View Related
Jun 29, 2015
How to enable the cairo dock at start up on debian jessie? Apparently there is no way to automatically lauch it at system reboot?
I've been also trying the following solution but with no result [URL] .....
View 2 Replies
View Related
Dec 28, 2015
After doing Debian's apt-get dist-upgrade from Wheezy/oldstable to Jessie/stable, I decided to try Kernel v4.2.0 instead of v3.16.0-4-amd64 to be even more updated. However, X doesn't work. /var/log/Xorg.0.log showed:
Code: Select allX.Org X Server 1.16.4
Release Date: 2014-12-20
[ 453.305] X Protocol Version 11, Revision 0
[ 453.305] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[code]...
View 8 Replies
View Related
May 4, 2015
I have an older computer and I did a fresh install of Jessie
Procesor AMD, Graphic card ATI Radeon 9200 PRO / RV280
After instalation my computer boot into black screen. I have no problems with wheezy.
I installed manually firmware-linux-nonfree (in case) module R200_cp is loading correctly.
When I configure Xorg, my log file says something like that:
-----------------------------------------------------------------------------------
(EE) Segmentation fault at address 0x0
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
--------------------------------------------------------------------------
View 14 Replies
View Related
Sep 1, 2010
Xorg fails to start on fresh install with 2x GTX285
View 3 Replies
View Related
