Debian Configuration :: WiFi Connection Stuck At (Setting Network Address)

Oct 9, 2015

I have Debian 8.2 with KDE 4.14 and everything runs perfect, except for the internet connection. This problem happens randomly when I turn on my machine. Sometimes when the desktop loads, the connection is already settled.

But sometimes when the desktop loads, the wifi icon is still loading and keeps stuck at "setting network address". Since this problem happens randomly I really don't know what is happening here. My wifi chip is this:

Code: Select all01:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34)

This is the problem:

I installed Debian with non-free firmware because of this chip.

View 6 Replies


ADVERTISEMENT

General :: Connection Error While Setting Up A Wifi Adhoc Network On Debian?

Mar 7, 2011

root@debian:/etc/network# ifup wlan0
SIOCSIFFLAGS: Unknown error 132
SIOCSIFFLAGS: Unknown error 132

[code]...

View 1 Replies View Related

OpenSUSE Wireless :: Network Manager Stuck On 'setting Network Address' Then Continuously Prompts For Hex Or ASCII Key

May 28, 2011

When I attempt to connect to a wireless network, the network manager asks me for the network's password, then says 'setting network address' for 20 or so seconds, then asks me for some random Hex or ASCII key in the same type of window I put the password in (Secrets for Noel -- KDE Daemon). Since a key is already typed into the window, I press OK, which then causes the network manager to go back to 'setting network address', then the window pops up again and keeps repeating itself.

I'm running Opensuse 11.4 with KDE, and my driver is ath9k. I don't know much about linux so please don't tell me to 'recompile this' or 'change this setting' without explaining how to do it. Please help, I've been unable to connect to wireless in OpenSUSE for 2 weeks now.

View 9 Replies View Related

Debian Configuration :: WiFi Connection Which Then Is Sent To A Wired Connection

Sep 22, 2015

The situation: The office has a WiFi network on one DSL line, which is used for our VoIP call center, and a wired network for our internal network and the majority of web surfing/traffic . Part of the office must be temperature controlled/monitored - we have a rather nice digital thermometer which is WiFi enabled.I have a Debian Wheezy box with a WiFi card and ethernet connection

What I'm trying to accomplish:Connect wifi enabled thermometer to WiFi network so it can automatically send temp updates (currently I have to do it manually via USB)Have the Wheezy box accept the downloaded file then send it to a back up server in the wired network

Side things that may be useful : Prefer to use wired connection for internet and apt and suchWiFi connection will really just be used for connecting to the thermometer

This [URL] .... topic got me thinking that there might be a way to bring the two networks together, but I don't know if that will wreak havoc on things. I know, the Windows and Mac OS don't like having ethernet and wifi at the same time, might Linux be better for this?

v&n had this to offer in the prior thread [URL] .... which I'll be doing more research on.

View 2 Replies View Related

Debian Multimedia :: WIFI Connection Setting Under Window Maker?

Mar 25, 2011

I have Squeeze running gnome well.It connect to my WFI AP automatically.I installed window maker yesterday .After I enter the window maker desktop, I found no internet connection.I run a network tool shortcut in th eapplication menu.This program is the same of my gnome desktop.I change the setting to make it automatically connect to my AP but in vain.

View 12 Replies View Related

Debian :: Wired Network Connection Stuck On Connecting

Nov 3, 2015

As a random thought I purged the firmware-realtek package and rebooted. Ethernet works fine now??

Fresh Jessie installed this morning with KDE. Wired worked fine during installation and initial boot. Reboot after package installation and only wireless is working right now. I did install the realtek firmware as part of my normal package list.

This is /var/log/syslog when it stopped working, and hasn't reconnected since. Cable is fine as it was working perfectly with a live Ubuntu shortly before I installed the system with Debian.

Code: Select alllspci | grep Ethernet
03:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)

Code: Select alldmesg | grep eth0
[    0.882603] r8169 0000:03:00.1 eth0: RTL8411 at 0xffffc90000c7e000, e0:db:55:b8:d6:a0, XID 1c800880 IRQ 56
[    0.882605] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.958631] r8169 0000:03:00.1 eth0: link down
[    2.958658] r8169 0000:03:00.1 eth0: link down
[    2.958686] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[Code] ....

View 2 Replies View Related

Debian Configuration :: WiFi Connection Isn't Working After Install?

Mar 27, 2016

I just installed the lastest stable Debian (gnome) today and what I was most afraid just happened: my laptop's wifi isn't working properly, it isn't turning on. This had already hapened on livecd.

In the laptop's chassis leds, the wifi led apears as green. When I click to turn on the wifi, as shown on the picture the button, quickly disappears and appears again not seeming to have any effect at all at turning on the wifi but not showing any error either!

Picture :

What's interesting about the wifi not working is that in the installation process I was able to connect to a wifi hotspot and it connected to the internet fine!

Now after installation was complete and my system did the reboot, I was no longer able to connect to the internet using wifi.

My wireless card is Atheros AR9565 and my LAN card is also Atheros.

Here is an output of lspci and lsmod which may have some leads about the problem.

lspci

Code: Select allquant@debian:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)

[Code] ....

Noticed:

1. I installed WiFi radar and I ran this on the terminal:

# sudo ifconfig wlan0 up

View 10 Replies View Related

Debian Configuration :: 8.0 With GNOME 32bit - WiFi Connection With WPA2

Apr 12, 2016

I'm using Debian 8 with GNOME 32bit. I installed a driver with ndiswrapper for my old D-Link DWL-G650M.

If i using the default network manager to connect with a Free wifi the connection works fine. But if the wifi have the password the connection doesn't work.

I. using my phone Android to create the Router-Wifi like this:

SSID: AndroidAP5
Password: BillyBob
Encryption(the one allowed): WPA2 PSK

With network manager gnome is impossible to connect. I changed in setting the password type with WPA2 but the system doesn't connect.

I tried to connect manually and i updated the file /etc/network/interfaces as the follow:

Code: Select allauto wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-ssid AndroidAP5
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk 18[...]

After this I tried to execute the follow command :

Code: Select all/etc/init.d/networking restart

And the system returns:

Code: Select all[  ok  ] Restarting networking (via systemctl): networking.service

but nothing else happens. The internet connection doesn't work. The Android phone not detect PC connection IN.

View 3 Replies View Related

Debian Configuration :: IPTables Logging Rules Dropping WiFi Connection

Dec 1, 2015

I'm trying to use these cookie cutter rules that I found. But every time I use them, after a few seconds my wifi connection goes dead. The exception was the first time I used then. Which lasted me a couple of minutes.

By dead I mean I can no longer open a webpage or ping google.

iptables -N LOGGING
iptables -A INPUT -j LOGGING
iptables -A OUTPUT -j LOGGING
iptables -A LOGGING -m limit --limit 2/min -j LOG --log-prefix "IPTables-Dropped: " --log-level 4
iptables -A LOGGING -j DROP

View 9 Replies View Related

Debian Configuration :: Connection WPA Personal Says Connected To Wl Network But No Internet Connection

Apr 15, 2011

1 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:

[code]....

I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.

View 4 Replies View Related

Debian Configuration :: How To Get /etc/network/interfaces To See Usb Wifi

Jun 16, 2010

I have a netgear wg111t that is running with ndiswrapper. It has an atheros chipset, but calling it ath0 didn't work.

Heres /etc/network/interface :

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface auto lo

iface lo inet loopback

View 6 Replies View Related

Debian Configuration :: Setting Up A Network Bridge?

Apr 9, 2011

I have two ethernet NIC's on my debian server. One built-in Realtek [eth0] (attached to internet), and a PCI Nvidia ethernet card [eth1] (attached to my Win7 netbook). I used this guide to setup the bridge: url. It worked when I was behind a router. But when I moved the computer in front of the router, to direct connect to the internet, the internet stopped functioning on any device that I plug into my Nvidia NIC. The name of my bridge is 'br0'. Does anyone know how to fix it, so I can route the internet to my second NIC?

My Win7 netbook displays this at an 'ipconfig' command:
Windows IP Configuration

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix:
Link-local IPv6 Address.....: fe80::143e:4cab:f802:8611%12
Autoconfiguration IPv4 Address..: 169.254.134.17
Subnet Mask.......:255.255.0.0
Default Gateway......:

My Debian interfaces file:

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo br0
iface lo inet loopback
# Set up interfaces manually, avoiding conflicts with, e.g., network manager
iface eth0 inet manual
iface eth1 inet manual
# Bridge setup
iface br0 inet dhcp
bridge_ports eth0 eth1

View 10 Replies View Related

Debian Configuration :: Setting Up / Adding To Network

Jun 22, 2011

I just installed Debian 6 squeeze on a P3, 632 MB RAM, 20 GB HD, and am trying to get it on-line. Ran lspci and lsusb on it (advice from another forum). Got the following results:

[Code]....

Exactly what I am trying to do: Existing network is as follows: Comcast internet to cable modem to Belkin N Wireless Router Model F5D 8236-4 v3. That router is wired to one desktop (running Windows XP)and has 4 wifi notebooks (two running Windows 7 and two running Mint 9 Isadora) and two Wii consoles running off of it. I am seeking to add another desktop to the network in another room without having to drill some holes and run about 40 feet of cable. Seems like it shouldn't take much to get the two routers to "talk" to each other so I can do this. The router I am trying to hook to it is either a Belkin F5D 9230-4 wireless router or a NetGear N150 WNR1000 v2 Wireless router.

View 6 Replies View Related

Debian Configuration :: WiFi Rt73 Won't Connect To Network?

May 20, 2011

I bought a USB wireless adapter for my desktop. I finally got it to partially work using firmware-ralink as described [URL]sing network manager it will pick up my wireless network. However it will not connect to it.

The output of iwconfig is
wlan0IEEE 802.11bg ESSID:"familyfarm"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1C:DF:B6:EA:B9

[code]...

View 5 Replies View Related

Debian Configuration :: Setting Up A Server Network For A School?

Nov 26, 2010

I am putting together a server and computer lab at my school for Standardized testing, and am planning on using debian for it. But first, i must prove to the school board that this is a possible and viable option, so right now it is one pc with 1 gig ram (Going to be the server for this experiment), and two others with around 512 mb ram.the problem with all this is, the computers in the lab cannot have hard drives, as there is some sort of licencing issue. So I need to be able to have these two testing computers boot from the server's hard drive.

View 14 Replies View Related

Networking :: Using Ethernet To Power WiFi Network And Setting Up WiFi?

Aug 23, 2009

I have an old PowerBook G4 that I would like to use as a 'dummy' computer for learning wireless penetration (WEP/WPA attacks) more effectively. I had been using a wireless router, but I gave it away I can use Mac OS X to share an ethernet connection over wifi, but this is _very_ un-configurable. You get two options only, WEP and a key-length. So, I would like to install someway to make this wireless connection more configurable.

View 2 Replies View Related

Debian Configuration :: Wheezy - Detect Printer On One WiFi Network But Not Other

Sep 21, 2015

I use a 'wifi hotspot' provided by my mobile (android) phone for internet/email and to connect to my wifi capable HP p1102w printer. Installation and use of the printer worked perfectly until I bought a new phone, again android with 'wifi hotspot' capability. The wifi connection on my new phone works fine for internet and email but it totally fails to detect my printer.

I have tried to detect and connect to the printer using system-config-printer and using the HP utility hp-setup. Both fail to detect the printer on the 'new' wifi network.

The old network connection which detects the printer as expected gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

The new (problematic) network connection which fails to detect the printer gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

View 4 Replies View Related

Debian Configuration :: Broadcom BCM4328 Cannot Find Wifi Network

Feb 7, 2010

I'm installing Squeeze on on a Dell Latitude D830 laptop with a Broadcom BCM4328 wireless network card, and I'm stuck on getting wireless internet to work. I have the 2.6.32-trunk-686-bigmem kernel. I run KDE and I have knetworkmanager installed to sort the network connections out. Unfortunately, knetworkmanager cannot find any wireless networks for eth2 (the wireless adapter). There is a wireless network, as other equipment can still connect to it.

I've installed the broadcom-sta drivers according to http://wiki.debian.org/wl. When I run iwconfig, I receive the following output: eth2 IEEEE 802.11abgn ESSID:"" Mode:Managed Frequency: 2.412 GHz Access Point: Not-Associated Bit Rate: 14 Mb/s Tx-Power:off Retry min limit: 7 RTS thr:off Fragment thr:off Power ManagementMode: All packages received Link Quality=5/5 Signal level=0 dBm Noise Level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 missed beacon:0

[Code]...

View 5 Replies View Related

Debian Configuration :: WiFi Settings - System Network Services Are Not Compatible

Nov 4, 2015

I got this message when I tried to get in WifiSettings.

"The system network services are not compatible with this version"

What should I do?

View 1 Replies View Related

Debian Configuration :: Setting Up A CUPS/Samba Shared Network Printer?

Aug 19, 2010

how to get clients connecting to an office printer. during a migration from windows server to debian/samba.

We have:

5 windows XP machines one Windows Server 2003 machine, PDC of the old domain One debian Samba PDC (of TEST domain)/print server (with CUPS installeD) running in a virtual machine hosted by the windows server One Toshiba eStudio 3511 printer

Using the CUPS control panel, I've been able to autodetect and add the printer, and it appears as an available share in SWAT for samba. However, the driver isn't perfect. CUPS could only supply drivers for the 3510c, not the 3511.

However, clients on the TEST domain are unable to access it. Doing so gives an error about a local policy preventing a connection to the print queue. I've tried googling this error and the fix that comes up in every result about changing a point and print policy setting, does not work.

however, I've been able to work around the issue. by first logging in as local administrator, navigating to the domain server, then inputting the domain root account credentials at the prompt. That allows me to attempt to connect to printers, but with a different error

"The server for the printer does not have the correct driver installed...."

I very strongly suspect that the 3510 driver actually will work, but it's just not being shared properly. The printer driver share folder is /var/lib/samba/printers, and that directory contains only a few empty subfolders. CUPS did not place the driver there as I would expect, and that is where clients are looking for it.

The thing is, I have no idea where CUPS DID put the driver.

On the old domain, the printer uses drivers for es4511, and looking on the toshiba site, this seems to be what they provide. The Toshiba Site provides a huge variety of drivers, including several windows ones, a universal driver, and a CUPS PPD. Cups asks for an optional PPD during install and I tried supplying that. It said installed successfully, but didn't change anything.

I've tried pasting the windows drivers into /var/lib/samba/printers/W32X86 too, and likewise with other drivers from toshiba's site. but this doesn't change anything either, so I'm at a bit of a loss.

how to install/setup drivers on a samba PDC, for windows machines?

Also relevant, my smb.conf:
anyone see any possible causes of problems?
# Samba config file created using SWAT
# from UNKNOWN ()
# Date: 2010/08/19 13:03:07

[code]....

View 12 Replies View Related

Debian Configuration :: Automatic Connection To A 802.1x Network?

Mar 9, 2010

I have configured a RaLink wireless card to connecto to an 802.1x network. I connect by selecting the network, and the i give the credentials(username/password). How do i configure Debian to automatically connect to this network when a session begins?

View 2 Replies View Related

Debian Configuration :: Network Connection Has Been Disconnected

Jul 5, 2011

How to enable wifi? I downloaded and installed Debian 6.00 and as I couldn't get online with my Tenda USB Wireless Adapter. I downloaded Debian 6.00 again, this time the CD Net Install version with Firmware included. However, the added firmware version of Debian does not find my wireless either. My wireless adopter is shown as Bus 001 Device 003: ID 148f:3072 Ralink Technology, Corp. RT3072 Wireless Adapter. There is a Network Icon in the Panel which when clicked shows "Create New Wireless Network". I have put in my ISP related network and my password and rebooted, but all I get is the message on my desktop:

"The Network Connection has been disconnected."

That isn't very polite, is it? Who has disconnected it and why remains a mystery to everyone except the culprit(s). I think I must have missed a basic step in the Wifi Enabling process. I checked the Use Permissions and everything is fine there, as User I have permissions to use modems and do networking and so forth. Also I should like to try "modprobe" but I see the package isn't in Synaptic Package Manager.

View 7 Replies View Related

General :: Serve Ssh Connection To Wifi Devices While Connected To A Wifi Network

Jul 21, 2010

I was wondering if there's any way for a laptop to be both simultaneously connected to a wireless network, while at the same time acting as an ad-hoc network with local access to serve as a wifi connection for my mobile device, which would be ssh-ing into the laptop and using local resources.

View 1 Replies View Related

OpenSUSE Network :: Wireless - Got Stuck On The Obtaining IP Address Part

Jan 7, 2010

I just installed openSUSE dual-boot with windows. Wireless works fine on windows. Only ethernet works on openSUSE. At first, it couldn't even find my wireless network. With my friend's help we experimented and tried everything to find the driver for my broadcam4312 driver.

Later, my friend some update from the official openSUSE peeps... Then, the wireless could my network. I entered in my password and then hoped for the best but then it got stuck on the Obtaining IP Adress part. I know I got the rite password.

View 9 Replies View Related

Debian Configuration :: 7.4 64bit Network Connection Is Dropping On Server

Oct 16, 2015

We are having an issue where our network connection is dropping on our server. Everything was working for about a month without issues then suddenly we experienced a network outage. Here is what I found in our logs. Rebooting the machine was the only way to have everything come up.

Oct 16 09:20:59 server2 kernel: [2612816.936085] ------------[ cut here ]------------
Oct 16 09:20:59 server2 kernel: [2612816.936101] WARNING: at /build/linux-FpPMO6/linux-3.2.54/net/sched/sch_generic.c:256 dev_watchdog+0xf2/0x151()
Oct 16 09:20:59 server2 kernel: [2612816.936106] Hardware name: ProLiant DL380p Gen8
Oct 16 09:20:59 server2 kernel: [2612816.936110] NETDEV WATCHDOG: eth0 (tg3): transmit queue 0 timed out

[Code] ....

We have the same exact server, running the same exact debian version for over a year with no issues.

View 0 Replies View Related

Ubuntu :: Gigabit Network Connection Stuck At 100 Mb/s?

Aug 12, 2011

I have a machine with an MSI motherboard and gigabit ethernet. However, it only reports being connected at 100Mb/s. I have tried using ethtool to force the speed to gigabit but it doesn't seem to have any effect. I'm using Ubuntu 11.04. Does anyone know a way other than ethtool to set the network speed?

View 9 Replies View Related

OpenSUSE Network :: Setting Static Local IP Address?

Feb 18, 2010

how I can define a local static IP address (so that I can run a web server off of the same IP, rather than letting my router DHCP it)?I've tried doing the YaST->Network Devices->Network Settings->Traditional Method with ifup->Set NIC to desired IP->Set Default Gateway to router address method, and afterwards I can't even get into my router anymore (not even responding to ping).

View 8 Replies View Related

Debian :: Ssh Connection Is Getting Stuck?

Aug 8, 2010

I am finding the following problem. Just wanted to know anyone else has experienced these types of issues.My laptop is debian squeeze x86 with custom 2.6.34.1 hand compiled kernel whereas the desktop where I am doing ssh is a dual boot system with debian squeeze x86_64 with custom 2.6.34.1 kernel and ubuntu 10.04 x86_64. Whenever the desktop is running ubuntu, there is no problem with ssh. But when it is running squeeze many times ssh hangs, just after issuing the command. Sometimes it asks for password and then do nothing, otherwise it just remains at the ssh line itself Even the escape (~.) does not have any effect on that. Only thing possible is to kill the ssh process. There used to be no problem last week, but I think after an upgrade either on laptop or desktop, things went this way.

View 3 Replies View Related

OpenSUSE Network :: Having IP Address Via DHCP But No Connection?

Apr 9, 2010

I've just installed opensuse 11.2 with the network installation iso. During the installation, it has got the IP via DHCP without any problem, and I has downloaded all the needed packets without problems... But when the installation finish.I have no network connection It's strange, because I have IP address, I get the IP from the DHCP server, and I can see the IP addreess if I do "ifconfig", the default route and even the DNS servers in the resolv.conf file; but I cannot ping my gateway (that is the DHCP server as well!!), I cannot ping anything in my network and either anything in internet. I see a network error at the start, but it finally gets the ip address. In the dmesg, the last message repeats over and over. The machine is a Hyper-V virtual machine, but as I said... I worked very well during the installation, I don't know what is going on. I've tried to reinstall, but it doesn't make any difference

View 2 Replies View Related

Debian Configuration :: Xen Boot Stuck At Initramfs

Dec 16, 2015

Been trying to follow this tutorial [URL] ..... and when I reboot and select the entry with Xen GRUB hangs at loading initial ramdisk ....

View 0 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved