Debian Configuration :: IPTables Logging Rules Dropping WiFi Connection

Dec 1, 2015

I'm trying to use these cookie cutter rules that I found. But every time I use them, after a few seconds my wifi connection goes dead. The exception was the first time I used then. Which lasted me a couple of minutes.

By dead I mean I can no longer open a webpage or ping google.

iptables -N LOGGING
iptables -A INPUT -j LOGGING
iptables -A OUTPUT -j LOGGING
iptables -A LOGGING -m limit --limit 2/min -j LOG --log-prefix "IPTables-Dropped: " --log-level 4
iptables -A LOGGING -j DROP

View 9 Replies


ADVERTISEMENT

Debian Configuration :: Lenny Not Loading Iptables Rules

Dec 30, 2010

I'm having some trouble with the configuration of the iptables. I want to setup a network server to serve as Fail Over (for my 2 ISPs), DHCP and DNS. I have 3 network cards, 2 connected to ISP's routers and 1 that serves as UPLINK for my switch.

I want to add some Iptables rules so I can achieve what I want to do. The problem is that the rules I try to use, they have to effect.... they don't load, here are the rules I am trying to add:

#iptables --table nat --append POSTROUTING --out-interface eth1 -j MASQUERADE
#iptables --table nat --append POSTROUTING --out-interface eth2 -j MASQUERADE
#iptables --table nat --append POSTROUTING --out-interface eth2 -j SNAT --to EXTIP

When I try to check to see if it loads, with the command:

#iptables -L

It returns empty

View 2 Replies View Related

Debian Configuration :: 7.4 64bit Network Connection Is Dropping On Server

Oct 16, 2015

We are having an issue where our network connection is dropping on our server. Everything was working for about a month without issues then suddenly we experienced a network outage. Here is what I found in our logs. Rebooting the machine was the only way to have everything come up.

Oct 16 09:20:59 server2 kernel: [2612816.936085] ------------[ cut here ]------------
Oct 16 09:20:59 server2 kernel: [2612816.936101] WARNING: at /build/linux-FpPMO6/linux-3.2.54/net/sched/sch_generic.c:256 dev_watchdog+0xf2/0x151()
Oct 16 09:20:59 server2 kernel: [2612816.936106] Hardware name: ProLiant DL380p Gen8
Oct 16 09:20:59 server2 kernel: [2612816.936110] NETDEV WATCHDOG: eth0 (tg3): transmit queue 0 timed out

[Code] ....

We have the same exact server, running the same exact debian version for over a year with no issues.

View 0 Replies View Related

Debian Configuration :: WiFi Connection Which Then Is Sent To A Wired Connection

Sep 22, 2015

The situation: The office has a WiFi network on one DSL line, which is used for our VoIP call center, and a wired network for our internal network and the majority of web surfing/traffic . Part of the office must be temperature controlled/monitored - we have a rather nice digital thermometer which is WiFi enabled.I have a Debian Wheezy box with a WiFi card and ethernet connection

What I'm trying to accomplish:Connect wifi enabled thermometer to WiFi network so it can automatically send temp updates (currently I have to do it manually via USB)Have the Wheezy box accept the downloaded file then send it to a back up server in the wired network

Side things that may be useful : Prefer to use wired connection for internet and apt and suchWiFi connection will really just be used for connecting to the thermometer

This [URL] .... topic got me thinking that there might be a way to bring the two networks together, but I don't know if that will wreak havoc on things. I know, the Windows and Mac OS don't like having ethernet and wifi at the same time, might Linux be better for this?

v&n had this to offer in the prior thread [URL] .... which I'll be doing more research on.

View 2 Replies View Related

Networking :: IPTables / SSH Connection To .150 - The Packets Are Still Handled By .150 After Adding The Rules

Jul 2, 2010

I two servers set up: 192.168.1.150 and 192.168.1.160 Initially, I want all traffic to be served by server 150. So for this purpose I am leaving the IPTables on .150 empty. At a point in time, I want to forward all incoming traffic to be served by .160 instead. I have accomplished this using these commands (on .150):

iptables -t nat -A PREROUTING -j DNAT --to 192.168.1.160
iptables -t nat -I POSTROUTING -j MASQUERADE

My problem is that if I have an open SSH connection to .150 (prior to adding the rules), the packets are still handled by .150 after adding the rules.. e.g. my SSH session stays active. I want these packets to be forwarded to .160, which would effectively disconnect the SSH session. I do not want the packets flat out dropped, I just want them forwarded on in whatever state they are in. If I try a new SSH session, it is properly forwarded to .160

View 5 Replies View Related

Networking :: IPTables Rules On PPPOE Connection - Forwarding / Routing

Sep 23, 2010

I'm trying to configure Iptables and I just want to block everything but http/https. However, my connection is pppoe, so I have the ppp0 interface. Pretty much every Iptables tutorial that I found don't teach how to deal with this kind of setup. I'm forwarding the ppp0 to eth0 and I could configure the input rules and they're working. After this, I need to configure the output but nothing seems to work.

The current working rules are:
Code:
Chain INPUT (policy ACCEPT 7858 packets, 5792K bytes)
pkts bytes target prot opt in out source destination
299 201K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED
0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:www
0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:https
11 820 DROP all -- any any anywhere anywhere

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- eth0 ppp0 anywhere anywhere
0 0 ACCEPT all -- ppp0 eth0 anywhere anywhere state RELATED,ESTABLISHED
Chain OUTPUT (policy ACCEPT 10791 packets, 1951K bytes)
pkts bytes target prot opt in out source destination

I don't understand what those "state RELATED,ESTABLISHED" rules do. Also, I don't know if this rules are secure, because i'm very confused about the ppp0/eth0 interfaces.

View 1 Replies View Related

Security :: How To Write Iptables Rules To Control Drop All Connection

Feb 23, 2010

I have setup my linux fedora server and i want to restrict access to my server.Basically i control using iptables.I'm not sure how to write an iptables rules to control drop all connection to port 8080 and allow only certain ip can access the instance on port 8080 example ip=10.254.14.16,192.168.1.10.

View 3 Replies View Related

OpenSUSE Wireless :: WiFi Connection Dropping At Irregular Intervals

Jan 5, 2010

In summary, I am using openSUSE 11.2 x64 on an Acer laptop with a wireless AR928X card. I can connect to my WEP-secured network when I boot up. After some time (it might be minutes, it might be hours), I am prompted for my WEP password again. This never works, despite being the one which gets me on-line at start-up!. The only solution is a reboot. The problem is intermittent and doesn't seem to depend on my on-line activity. I have tried the following with the same result:
KNetworkManager
Traditional using IFUP
Enabling / disabling IPv6 support

I tried installing the compat-wireless package through YaST and then managed to get no internet connection at all. Went back to KNetworkManager and things "worked" again until I was prompted for the WEP code. I have openSUSE 11.2 x64 working on my office laptop without problem and can connect to my home network without any problem. My issues are with my personal laptop. I have reached the stage of booting into Windows 7 as my default option so that I can access the internet reliably. What I can do to diagnose and repair the problem - could it be that the card is going into powersave mode? If so, how do I stop that happening? I'd prefer to be on openSUSE but need to be able to rely on the internet.

View 9 Replies View Related

Ubuntu Networking :: EeePC 901 Dropping WiFi Connection - Need New Driver?

Jan 5, 2010

Here's the situation: I've got an eee pc 901 running Ubuntu 9.10 netbook remix. I'm using it to connect to a WPA-encrypted wireless network on a WRT54GL running dd-wrt. It mostly connects and works ok, but sometimes it just stops working for no apparent reason (the netbook still shows itself as connected), but you can't get anywhere until you manually disconnect and reconnect. Other times, it will drop the connection, and then quickly reconnect (or sometimes not). Obviously, this behavior is pretty irritating. At first I thought the problem was with the router, but I checked the logs there and they all seem fine, and other computers on the same router don't have this problem. Looking at "dmesg | tail" on my netbook, I see a lot of instances of the following error, which I'm thinking is probably the problem:

Code:
[11137.762233] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[11142.872797] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 440
[11152.883274] ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 556
[11152.883529] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[11163.952056] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!

I searched for that error message and I found this Ubuntu bug report: [URL] that describes symptoms that match mine. In that report, a poster mentions that he compiled and installed a new version of the wireless driver from the Ralink website, and it fixed his problem. Do you think installing a new driver would be good? Or has that updated driver already been added to the kernel since that bug report was filed? I've never compiled a kernel module before.

One other thing, I also see repeated instances of these lines (or similar ones) in dmesg, which look like they could be related.
Code:
[44096.275923] RX DESC f30ca000 size = 2048
[44096.276885] <-- RTMPAllocTxRxRingMemory, Status=0
[44096.281404] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[44096.281424] 1. Phy Mode = 0
[44096.281435] 2. Phy Mode = 0
[44096.309841] 3. Phy Mode = 0
[44096.314533] MCS Set = 00 00 00 00 00
[44096.316196] <==== RTMPInitialize, Status=0
[44096.316280] 0x1300 = 000a4260
[44096.401269] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44096.472502] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 116
[44096.472977] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44106.768056] ra0: no IPv6 routers present

View 1 Replies View Related

Red Hat / Fedora :: Logging Connection Attempts With Iptables

Mar 8, 2010

I'm having a lot of problems getting NIS set up with our firewall. I've looked online and no one seems to have any answers. When the firewall is off, NIS works. When it's on, it doesn't.I would like to know which ports NIS needs by logging connection attempts on the server, since I would swear the right ports seem open already. Right now I'm using this to generate the log entries:

iptables -I INPUT -m state --state NEW -j LOG --log-prefix "New Connection: "
iptables -I OUTPUT -m state --state NEW -j LOG --log-prefix "New Connection: "

However, I think it must only work for successful connections, because I'm not seeing any new entries when I try running the NIS client on another machine (ypbind).

View 5 Replies View Related

Security :: Logging Connection Bytes For Iptables?

Mar 28, 2011

I am wondering if it's possible to log the number of bytes a connection transfered when the connection is complete with iptables. I know I've seen this sort of information in Cisco FWSM logs, where the "Teardown" entry of the logs has the bytes transferred for that connection. Is it possible to have something similar to that with iptables? Where the initial connection attempt is logged (i.e. NEW, which I have logging fine) AND an entry for that connection that includes the bytes transferred?

View 6 Replies View Related

Ubuntu :: Replaced Windows 7 Starter But Want To Change Back As It Keeps Dropping Wifi Connection?

Jul 1, 2011

I installed ubuntu 11.04 on my dell inspiron mini 10. I replaced windows 7 starter but i want to change back as it keeps dropping my wifi connection.

View 9 Replies View Related

Debian Configuration :: WiFi Connection Isn't Working After Install?

Mar 27, 2016

I just installed the lastest stable Debian (gnome) today and what I was most afraid just happened: my laptop's wifi isn't working properly, it isn't turning on. This had already hapened on livecd.

In the laptop's chassis leds, the wifi led apears as green. When I click to turn on the wifi, as shown on the picture the button, quickly disappears and appears again not seeming to have any effect at all at turning on the wifi but not showing any error either!

Picture :

What's interesting about the wifi not working is that in the installation process I was able to connect to a wifi hotspot and it connected to the internet fine!

Now after installation was complete and my system did the reboot, I was no longer able to connect to the internet using wifi.

My wireless card is Atheros AR9565 and my LAN card is also Atheros.

Here is an output of lspci and lsmod which may have some leads about the problem.

lspci

Code: Select allquant@debian:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)

[Code] ....

Noticed:

1. I installed WiFi radar and I ran this on the terminal:

# sudo ifconfig wlan0 up

View 10 Replies View Related

Debian Configuration :: 8.0 With GNOME 32bit - WiFi Connection With WPA2

Apr 12, 2016

I'm using Debian 8 with GNOME 32bit. I installed a driver with ndiswrapper for my old D-Link DWL-G650M.

If i using the default network manager to connect with a Free wifi the connection works fine. But if the wifi have the password the connection doesn't work.

I. using my phone Android to create the Router-Wifi like this:

SSID: AndroidAP5
Password: BillyBob
Encryption(the one allowed): WPA2 PSK

With network manager gnome is impossible to connect. I changed in setting the password type with WPA2 but the system doesn't connect.

I tried to connect manually and i updated the file /etc/network/interfaces as the follow:

Code: Select allauto wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-ssid AndroidAP5
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk 18[...]

After this I tried to execute the follow command :

Code: Select all/etc/init.d/networking restart

And the system returns:

Code: Select all[  ok  ] Restarting networking (via systemctl): networking.service

but nothing else happens. The internet connection doesn't work. The Android phone not detect PC connection IN.

View 3 Replies View Related

Ubuntu Networking :: WiFi Dropping And Dropping Speed

Feb 25, 2010

As soon as i'm starting to copy a large file enough file (>700Mb) to my ubuntu box (connected to an Asus router via wifi) from a Windows 7 client (connected to router via ethernet cable) i get a dramatic drop in speed. upload starts at 1,0Mb/sec with a ping to ubuntu box at <1ms, and in 2 minutes it drops to 200kb/sec with a ping of over 1000ms! The ping increases with every second in a linear progression.

To exlude router as a possible problem copying to a windows 7 notebook connected to router via wifi results in an average of 2,7Mb/sec with an average ping of 150ms.

MB Model: Asus P5B Deluxe wifi
OS: Ubuntu Server 9.10 + desktop installed
Wifi configured via GUI

2. lsusb

3. wlan0

4. lsmod

View 2 Replies View Related

Debian Configuration :: WiFi Connection Stuck At (Setting Network Address)

Oct 9, 2015

I have Debian 8.2 with KDE 4.14 and everything runs perfect, except for the internet connection. This problem happens randomly when I turn on my machine. Sometimes when the desktop loads, the connection is already settled.

But sometimes when the desktop loads, the wifi icon is still loading and keeps stuck at "setting network address". Since this problem happens randomly I really don't know what is happening here. My wifi chip is this:

Code: Select all01:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34)

This is the problem:

I installed Debian with non-free firmware because of this chip.

View 6 Replies View Related

Debian Hardware :: Intel 3160 - WiFi Dropping Association Regularly

May 12, 2015

I have three Toshiba S55 laptops running debian 8 or ubuntu 14.04 with Intel 3160 internal wifi cards.

In a heavily congested WIFI environment all these machines will regularly lose their associations with an ASUS RT-AC68U 802.11AC AP whether running ubuntu 14.04 or debian 8. The AP is 5 feet away.

I have upgraded the 3160 /lib/firmware to the latest available on the Intel website.

The association will generally be lost within 1 to 10 minutes. The behavior is very repeatable.

I have removed all networking tools except for wicd. However, the same behavior is observed using network manager.

If I plug in an rtl8812au based 802.11ac dongle the connection in identical situations lasts forever.

logfile around the problem time:

*** OpenVPN is often the first to notice the link is down

2015-05-11T12:30:07.105004-07:00 s55t ovpn-hitnet[9781]: TLS Error: TLS handshake failed
2015-05-11T12:30:07.105174-07:00 s55t ovpn-hitnet[9781]: SIGUSR1[soft,tls-error] received, process restarting

*** This always follows the failure reported by OpenVPN

2015-05-11T12:30:07.233906-07:00 s55t kernel: [30897.194045] cfg80211: Calling CRDA to update world regulatory domain
2015-05-11T12:30:07.233918-07:00 s55t kernel: [30897.195689] cfg80211: World regulatory domain updated:
2015-05-11T12:30:07.233918-07:00 s55t kernel: [30897.195691] cfg80211: DFS Master region: unset

[Code]....

View 14 Replies View Related

Fedora :: IPtables Creates An Error During Startup - Applying Firewall Rules: Iptables-restore: Line 21 Failed

Jul 17, 2010

IPtables creates an error during startup as well as when I try to restart it: Here's the output of:

[Code]....

View 11 Replies View Related

Ubuntu Servers :: Setup Iptables Rules In /etc/if-up.d/iptables?

Apr 16, 2011

I am running Ubuntu server 10.10 and trying to setup iptables rules in /etc/if-up.d/iptables

Quote:
root@host# cat /etc/network/if-up.d/iptables
#!/bin/sh -e
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

Problem is that iptables doesn't get updated and I don't see them when iptables -L is executed after reboot.

View 2 Replies View Related

Debian :: Wireless Connection Dropping Out Constantly Or Failing Authentication?

Mar 12, 2011

Using Wicd and it keeps dropping out or telling me "bad password" when the password is in fact correct. I even know it works because the first couple of times it worked, but the connection wasn't sustained for more than a few seconds each time. My reasoning is my wireless is functional in Ubuntu, there's no reason it shouldn't be in Debian. Wireless network card is ASUS PCE-N13. Ralink driver is installed. WPA-supplicant is installed. Gnome Network Manager is also present, though I've heard that it doesn't support my particular situation.

View 5 Replies View Related

Debian Configuration :: Build A Package - Debian / Rules Error?

Apr 2, 2011

I recently tossed Ubuntu for Debian Unstable for my personal machines and I'm having trouble building Emerald into a package. I've already configured and installed the package (using the usual ./configure, make, make install) but I wanted to make a deb for future use (for myself and for others). However every time I try to run dpkg-build I get the following error message.

dh_install -pemerald  --sourcedir=debian/tmp
dh_install: emerald missing files (usr/bin/*), aborting
make: *** [binary-install/emerald] Error 2
dpkg-buildpackage: error: debian/rules binary gave error exit status 2

[Code]...

View 2 Replies View Related

Debian Configuration :: Rules With Ipset After Restart

Mar 8, 2016

I'm using Debian 8 and I have ipset v6.23 and iptables v1.4.21. I put a rule with ipset in rules.v4 file and then I restart the iptables with netfilter-persistent service. When I reboot the iptables list is empty. But if in the file I don't put a rule with ipset, after reboot the iptables list is correct.

View 4 Replies View Related

Debian Configuration :: Available Variables /rules Script

Sep 2, 2010

I may not searched deeply enough but is somewhere desribed what variables are available in debian/rules package build script generated by dh_make ? I know about CURDIR f.E. but what about package Version (defined in debian/control) ?

View 2 Replies View Related

CentOS 5 Server :: Port Configuration - Being Blocked - Iptables And Connection

Jul 4, 2009

I have a fresh installation of CentOS 5 I'm using for a server, and I'm having issues with port configuration. I have iptables running, and it started with no /etc/sysconfig/iptables file. I added a few basic rules (port 53, port 10000 for webmin), saved the file, and restarted the service. I tried connecting to webmin, scanned ports, and traffic was blocked. I set iptables to allow all traffic and restarted the service, and it still showed basically every port as being blocked. It seems port 80 and port 22 work for some reason, even when I tell iptables to block all ports.

I'm not sure what's going on here. Iptables is reading the /etc/sysconfig/iptables file, and if I use lynx localhost:someport it responds as it should according to the file. However, if I try connecting by IP, it's like there's some other firewall or something running that does whatever it's configured to do.....

View 2 Replies View Related

Debian Configuration :: Udev / Systemd Change Some Rules In 8.0

Apr 18, 2016

I have SSD drives without SCT support, because of this I want to tune /sys/block/device-name/device/timeout in order to force mdadm put these drives offline. So, I can see my drive like this:

/dev/disk/by-id/ata-OCZ-SABER1000_A22MJ061512000074.

Where can I tune /sys/block/device-name/device/timeout from 30 to 7 sec only for these drive? I don't want to use rc.local.

Can I create right udev rules for it in /etc/udev/rules.d?

I want to avoid any conflict with /lib/udev/rules.d.

Code: Select all# udevadm monitor --environment --udev
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing

UDEV  [9302.549485] add      /devices/pci0000:00/0000:00:01.2/0000:03:00.0/host0/target0:0:0 (scsi)
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:01.2/0000:03:00.0/host0/target0:0:0
DEVTYPE=scsi_target
SEQNUM=5210
SUBSYSTEM=scsi

[Code] ....

View 0 Replies View Related

Debian Configuration :: Udev Rules To Change R/W Permissions?

Mar 28, 2011

I'm trying to allow non-root account to use avrdude to program mucrocontrollers. There are many articles online about how to do that, but it seems not to work for me. Every time i try to execute avrdude it says "permission denied". Here's "$ udevadm info --name=/dev/bus/usb/002/011 --attribute-walk" says looking at device '/devices/pci0000:00/0000:00:1d.1/usb2/2-1':

KERNEL=="2-1"
SUBSYSTEM=="usb"
DRIVER=="usb"
ATTR{configuration}==""

[code]....

However, after restarting udev, replugging the device, even rebooting the computer I still get "permission denied". The Vendor and Product match, so what's the problem?

View 7 Replies View Related

Debian Configuration :: Synaptics Udev Rules Ignored After Yesterdays Upgrade?

Apr 14, 2010

After yesterdays upgrade of Squeeze, my Synaptics touchpad's udev configuration is ignored on my EeePC. It was working fine before. Are there any changes in how it is supposed to be configured or is it just broken?

View 3 Replies View Related

Ubuntu Networking :: Iptables Sets Itself To A Policy Of Dropping Everything

Mar 3, 2010

When I reboot my computer, my iptables sets itself to a policy of dropping everything, adds a bunch of rules, and a bunch of extra chains, to the effect that (due to everything being set to drop) I can't do anything. I know how to fix this from the terminal to the extent of just clearing most of it and changing the policies back. However, what I don't know is how to make it stay that way. I have a file with the iptables rules I want, so every time I start up I just run iptables-restore, but I don't want to have to do this every time, particularly since others use this computer who do not have admin privileges.

I've tried changing /etc/network/interfaces with the added code pre-up iptables-restore < (etc) But that never does anything, or if it does it just makes stuff work even less. I've tried changing init.d before based on similar info elsewhere, still no luck. I don't know how to get it to stick, and I don't know why it is defaulting to the rules it is, other than that I used a firewall app a while ago and afterwards this was the result, for which I uninstalled that app after no success using it to reverse the damage.

View 2 Replies View Related

Networking :: Can't APPLY Iptables Rules

May 22, 2011

I added a few rules to my /etc/iptables.rules file and then used sudo iptables-restore < /etc/iptables.rules but i got an error saying "iptables-restore: line 29 failed".But the only word on that line.

View 1 Replies View Related

Security :: Programming Iptables Rules For 1:1 NAT?

Sep 16, 2010

I am trying to program iptable rules for implementing a 1:1 NAT which does the following:

1. Forward all traffic from all ports on a public ip to a private ip
2. Forward traffic from a range of ports (x-->y) on a public ip, to a private ip

I did some google searches for the same, and came up with the following.

iptables -A FORWARD -t filter -o eth0 -m state
state NEW,ESTABLISHED,RELATED -j ACCEPT
iptables -A FORWARD -t filter -i eth0 -m state
state ESTABLISHED,RELATED -j ACCEPT

View 15 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved