Networking :: Dbus-daemon: Rejected Send Message?
Apr 10, 2009
Each time after boot, I have to wait for proximately 2 minutes before Firefox starts showing any web pages. I believe the delay is caused by the following issue: Code: Apr 7 21:03:18 linux-kr6c nm-dispatcher.action: cript '/etc/NetworkManager/dispatcher.d/netcontrol_global_hooks' exited with error status 1.Apr 7 21:03:18 linux-kr6c nm-dispatcher.action: cript '/etc/NetworkManager/dispatcher.d/nfs' exited with error status 2.
Apr 7 21:03:18 linux-kr6c dbus-daemon: Rejected send message, 14 matched rules; type="method_return", sender=":1.50" (uid=0 pid=3132 comm="/usr/lib/NetworkManager/nm-dispatcher.action ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply=0 destination=":1.5" (uid=0 pid=2097 comm="/usr/sbin/NetworkManager "))
Apr 7 21:05:39 linux-kr6c ntpd[3500]: ntpd 4.2.4p4@1.1520-o Mon Jan 19 14:44:51 UTC 2009 (1)Apr 7 21:05:39 linux-kr6c ntpd[3501]: precision = 1.000 usec I have no idea what my machine is doing, but it seems as nothing is happening between 21:03:18 and 21:05:39.
View 5 Replies
ADVERTISEMENT
Nov 9, 2010
What does this error message in `/var/log/auth.log` mean? It's showing up at about a rate of 1 per second. My indicator applets are missing as are my status bar icons. The desktop icons are flashing on and off at a rate of about 1 per second.
{{{
dbus-daemon: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.1299" (uid=1000 pid=18184 comm="nautilus) interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)"
[code]....
A little prior to this I installed Wine beta using Ubuntu Software Centre, then applied the multiuser wine recipe as noted here [URL] /showthread.php?t=917422&), then installed a game called ToonTalk3 [URL], and then tried to install DirectX 10 as per these instructions [URL]
The directx install stalled with a series of messages about being unable to copy certain dll files. I aborted the install, using the install wizard's abort command. It was a bit after this that I noticed the flashing symptoms. They may have been there earlier but I usually run my apps full screen so wouldn't have noticed.
I've reversed the wine multi-user configure, again using the recipe, and run `sudo apt-get purge wine1.2`, and logged off and on. The flashing and errors still occur.During logon there are bunch of indicator applet error message dialog boxes (which I'll post later after finishing this message and conducting another log off/on cycle). I'm running Ubuntu 10.4 LTS 32bit on an Acer Asper 3500 notebook. The install is about 2 weeks old.
View 3 Replies
View Related
Aug 4, 2009
I encountered a problem when send dbus method call message.Program A which runs as root user provides system-wide dbus service interfaces.When another program B with root permission send method call message to A,It received the error info:Error org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.41" (uid=0 pid=3397 comm="dbus-send --system --print-reply --type=method_cal") ...But when I run prgram B in generic user permission,localmachine for example,it success to send message.It confused me all the day.
View 2 Replies
View Related
May 14, 2010
I've setup DHCP and a DRBL server on my box running Lucid, and everything is working fine except TFTP.TFTP is configured, but when I try to start it with:Quote:service tftpd-hpa startThe following is returned:Quote:
start: Rejected send message, 1 matched rules; type="method_call", sender=":1.96" (uid=1000 pid=24555" comm="start") interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart (uid=0 pid=1 comm="/sbin/init"))
[code]...
View 3 Replies
View Related
Feb 8, 2011
I'm trying to write an upstart conf file to get Murmur (the Mumble server) to run as a service. It's located in /etc/murmur, and I'm using the following script in /etc/init/murmur.conf:
[Code]...
View 1 Replies
View Related
Jul 5, 2011
when I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).
View 4 Replies
View Related
May 4, 2010
I've just upgraded to 10.04. I love it. I've been running dark themes for a long time and this upgrade merged seamlessly with my setup.There is a nasty problem that I've noticed on only my desktop box (laptop is fine, also upgraded to 10.04). The dbus-daemon is hogging approximately 50% of my cpu cycles. Is there a way to limit this? I'm watching this via the System Monitor and the % CPU. My laptop registers its dbus-daemon % CPU as 0.
View 3 Replies
View Related
Mar 24, 2010
when calling 'top' dbus is having load of activity ('dbus-monitor --session') outputs also a lot of action (see attachement). this has effect that my machine is slowing down and normal work takes ages.I have no clue where the activity is coming from. I also had a look at https://bugs.launchpad.net/ubuntu/+s...or/+bug/441828. But there are no unnormal devices plugged in... (just keyboard + cordless mouse).when starting the machine the cpu load is ~9%. After a while (after 1 day) it goes up to 70-80%. the started applications do not change during that time. so i guess somewhere there is a leak.
View 9 Replies
View Related
May 31, 2009
if i want to send a message to another computer? or get access to another system? what computer knowledges should i know? or what techniques should i learn?
View 2 Replies
View Related
Mar 24, 2010
how to send message in terminal
View 5 Replies
View Related
Nov 30, 2010
if there is a way to send a message to computers connected to the LAN? I tried to install linpopup but I only got the message E: Unable to locate package linpopup.
View 2 Replies
View Related
Jan 11, 2010
I'm looking for a solution to broadcast messages on the network. All systems are Linux / Ubuntu.
It would be used in case the server has to be rebooted. It saves me a walk to every office in the building.
View 9 Replies
View Related
Apr 26, 2010
i am trying to send message through terminal with smbclient, i have searched the net and found this command
Code:
smbclient -M <hostname>
now i am confused on hostname, which i open the network folder i see to icons
1. is my laptop
2. Windows Network
when i enter Windows Network folder i see 2 more icons
1.MSHOME
2.WORKGROUP
and when i enter MSHOME folder i see one icon 1. MIRZA-SAAD this is the computer which has xp in it i want to send message to it with smbclient now how when i write this command i see this error
Code:
amir@amir-laptop:~$ smbclient -M //MSHOME/MIRZA-SAAD/
Connection to //MSHOME/MIRZA-SAAD/ failed. Error NT_STATUS_BAD_NETWORK_NAME
View 7 Replies
View Related
Jan 18, 2011
Finally I got success in setting up of CDMA USB modem but I could not access the internet or browse the internet. I can only download message and send messages using through evolution. But can browse internet.
View 1 Replies
View Related
Apr 30, 2009
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies
View Related
Jun 30, 2011
I am trying to send an email by sendmail (ubuntu) to external servers, but unable to send. following is what i am trying to do and what i got the response:
sendmail -v xxx@hotmail/gmail.com < mail.test
where mail.test contains
[COLOR="rgb(105, 105, 105)"]
From: bla@bla.com
[code]....
View 2 Replies
View Related
Mar 29, 2011
I recently updated my iPod touch to the 4.2.1 firmware. So I get the usual
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) Error. Yes I've tried the old "sudo apt-get update;sudo apt-get dist-upgrade"
but that was to no avail. way to fix this? Now click 'back'.
View 3 Replies
View Related
Feb 24, 2010
I have users [URL] unable to send email to [URL]. [URL] user also unable to send email to [URL]. But both email addresses are fine as they can receive email from others or from [URL] and [URL]. I able to telnet mail server 110 and 25, no problem. Version: ESMTP Sendmail 8.12.10
Mail Log:
Feb 23 11:36:35 mail sendmail[16228]: o1N3aZxt016215: to=<xxx1@gas.com>, ctladdr=<xxx@abc.com> (501/501), delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=442918, relay=gas.com, dsn=5.1.2, stat=Host unknown (Name server: gas.com: no data known)
[code]....
View 4 Replies
View Related
Apr 21, 2011
I will leave my computer os Fedora 14 running after a period of time I can hear the hard drive is running really fast and using system monitor I see that a lot of the swap space is being used, the only thing that seems to using a lot of memory is "dbus-daemon"Clicking on it I get the following. dbus-daemonProcess ID : 1739Parent:: initParents's ID :1Number of threads : 2Command: /bin/dbus-daemon--fork--print-pid5--print-address 7-- session Any typos mine as I have a screen shot but can not embed
View 2 Replies
View Related
Jan 20, 2011
I have a minecraft server running as a daemon. When you run it normally (not as a daemon), you can type commands into the console. How can you get to the console so I can send it commands while it's running as a daemon?
View 1 Replies
View Related
Dec 27, 2010
Would like to know how can I put a daemon on Debian 5 that can send e-mail when the content of a specific folder change, if not possible, at least how to send a daily e-mail with the content of a specific folder.
View 4 Replies
View Related
Feb 8, 2010
I am running Postfix 2.6.1 on Suse 11.2, and am receiving an error message on my windows machine saying "Recipient address rejected: Relay access denied." If I login to my email on the local machine or via squirrelmail I have no problem sending mail. The output of postconf -n is as follows:
server:~ # postconf -n
alias_maps = hash:/etc/aliases
biff = no
[code]....
View 1 Replies
View Related
Jan 24, 2011
do have installed glib and dbus and can find them manually , /usr/include/glib-2.0/glib.h , but while comipling applicaiton it gives following error messages.
/usr/include/libosso.h:32:18: error: glib.h: No such file or directory
/usr/include/libosso.h:38:23: error: dbus/dbus.h: No such file or directory
/usr/include/libosso.h:39:32: error: dbus/dbus-protocol.h: No such file or directory
View 1 Replies
View Related
Apr 29, 2010
When I click on the Ibus icon, I always get a message:
Code:
IBus daemon is not started. Do you want to start it now?
I click yes, and I get:
Code:
IBus has been started! If you can not use IBus, please add below lines in $HOME/.bashrc, and relogin your desktop.
I have no idea how to add the amentioned lines to the amentioned file, I guess its via terminal, but I dont know what do I have to type
View 1 Replies
View Related
Jun 22, 2011
I have created a script named ssh_inotify.sh to check /var/log/auth.log log file for newly started ssh session and display a question message box. This script uses inotifywait to monitor this above log file for modify file event and zenity to create question message boxes.Now i have created a startup service config file named ssh_inotify under /etc/init.d folder and placed the script ssh_inotify.sh under /usr/sbin and chmod this script to be executable.
The service config file ssh_inotify uses start-stop-daemon to run this script as background process.Now theproblem is that when i start this service using sudo service ssh_inotify start, the service is started, I can confirm this using ps -A | grep ssh_inotify also i can check for the PID associated with it under /var/run/ssh_inotify.pid. Now when i ssh to my machine, i do not get the question message box, I am writing in log file and in that i can see that the message under cancel button option for question message box is getting printed.This script runs perfectly when run directly or using start-stop-daemon command directly (exact command as typed in service config file above) on terminal, but not when this same command is executed using service file.Can someone please suggest me the solution and reason for such behavior when same command executed under different mode (using service or directly from terminal).If you guys require code, i can attach the files (currently i am in office so don't have access to these files.)
View 1 Replies
View Related
Jan 13, 2010
When I install a commercial audio into the CDROM drive I get th following: Unable to mount Audio Disc DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered
View 1 Replies
View Related
Dec 8, 2010
I have been trying to send some messages from my Debian GNU/Linux to my Canaima GNU/Linux, i have tried with write: write user@host
But it says user is not logged in, apparently the write daemon have to be running in both machines to do this.
And i wanted to use talk, but i should install it in both machines ¿?
The thing is that i have like 10 machines i wanted to send messages to, but i cant find an easy way to do this.
Is there any other way i am missing? or it has to be the "hard" way
View 1 Replies
View Related
Apr 8, 2011
I'm using Thunderbird under Ubuntu Lucid Lynx. I'm managing to send messages to other newsgroup but not to alt.os.linux.ubuntu. It says:"A News (NNTP) error occurred: You are not allowed to post to alt.os.linux.ubuntu". Does somebody know what is wrong and how do I enable sending messages to this newsgroup?
View 3 Replies
View Related
Mar 4, 2011
i am new to using linux and am doing an application to send sms using the kannel? my problem is that i dont know where to get my url for the sendsms?in the mean time i have tried:-http://192.168.9.93:13013/cgi-bin/se...assword=foobar
View 1 Replies
View Related
May 28, 2010
but i don't see how you can send a new message to someone using kopete.I use kopete with only my aim account. I want to be able to send a message to someone who is not on my buddy list.If they're on my buddylist, its easy to send a message, but nowhere in the program does it allow you to send to someone not on your buddy list
View 3 Replies
View Related
