Finally I got success in setting up of CDMA USB modem but I could not access the internet or browse the internet. I can only download message and send messages using through evolution. But can browse internet.
View 1 RepliesHi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies View RelatedI had been using Evolution with no issues though until I installed Ubuntu 10.04 after which I could no longer send outgoing messages. I use a hotmail live account with Evolution. I have also just installed Evolution 2.30 from 2.28 to see if that would solve the issue, but it did not.
View 9 Replies View RelatedIt worked for almost a year with no problems. I suspect a recent update changed something.
Hotmail is my mail service. I've read instructions on how to set up Evolution. I've followed them with no change in results.
I've tried smtp.live.com:587. It was originally set as just smtp.live.com.
SSL is the way it is set but i've tried TLS too. I've seen both suggested.
The authentication is set to "PLAIN" yet when I press send/receive the error message says
"Error while Sending message.
Could not connect to smtp.live.com: Input/output error
POP Before SMTP auth using a non-pop source".
I've tried removing it and reinstalling it. One thing I did notice is that after reinstalling it, the last messages I had tried to send were still showing up. It operated as if I hadn't removed it at all. I did restart the computer between the removal and installation.
On another Evolution mail problem post, a user said that Evolution was a crappy program and people should switch to something else. Do many people think that is true? Does Thunderbird from Firefox work much better?
I'd rather fix it than give up by switching. I really like Mail on Apple computers because I can switch to the "from" tab and highlight numerous messages at one time to move them or delete them. In Evolution I must delete them one at a time.
My Evolution email client is able to send only smal messages. As soon as the email message is more than approx. 20 lines, sending is blocked. The status line displays "Sending message (0% complete)" for a few minutes and then it displays "Error while sending message." Receiving of email messages works fine.
I am using Ubuntu 10.04 with Evolution 2.28.3
I have just set up my new Evolution account, and I set it with Novell, and when I try to send out an email, Novell is not recognized, and the message won't send out.
View 2 Replies View RelatedI am able to reieve message but not able to send message on evolution from my mail client. evolution gives the error as: PHP Code: Cannot get message 1285571362.20345.mail312.opentransfer.com,S=1928: Input/output error
View 1 Replies View RelatedIs there a way to send messages from Ubuntu to windows xp computer, like NET SEND, in Windows network enviroment?
View 1 Replies View RelatedI created a new account on laposte.net.
This account can receive messages but cannot send any from Thunderbird.
[url]
I am using ubuntu 9.04. I have configured Evolution on my laptop, but it is not working.
View 1 Replies View Relatedhow to send message in terminal
View 5 Replies View Relatedif there is a way to send a message to computers connected to the LAN? I tried to install linpopup but I only got the message E: Unable to locate package linpopup.
View 2 Replies View Relatedif i want to send a message to another computer? or get access to another system? what computer knowledges should i know? or what techniques should i learn?
View 2 Replies View RelatedI'm looking for a solution to broadcast messages on the network. All systems are Linux / Ubuntu.
It would be used in case the server has to be rebooted. It saves me a walk to every office in the building.
i am trying to send message through terminal with smbclient, i have searched the net and found this command
Code:
smbclient -M <hostname>
now i am confused on hostname, which i open the network folder i see to icons
1. is my laptop
2. Windows Network
when i enter Windows Network folder i see 2 more icons
1.MSHOME
2.WORKGROUP
and when i enter MSHOME folder i see one icon 1. MIRZA-SAAD this is the computer which has xp in it i want to send message to it with smbclient now how when i write this command i see this error
Code:
amir@amir-laptop:~$ smbclient -M //MSHOME/MIRZA-SAAD/
Connection to //MSHOME/MIRZA-SAAD/ failed. Error NT_STATUS_BAD_NETWORK_NAME
Each time after boot, I have to wait for proximately 2 minutes before Firefox starts showing any web pages. I believe the delay is caused by the following issue: Code: Apr 7 21:03:18 linux-kr6c nm-dispatcher.action: cript '/etc/NetworkManager/dispatcher.d/netcontrol_global_hooks' exited with error status 1.Apr 7 21:03:18 linux-kr6c nm-dispatcher.action: cript '/etc/NetworkManager/dispatcher.d/nfs' exited with error status 2.
Apr 7 21:03:18 linux-kr6c dbus-daemon: Rejected send message, 14 matched rules; type="method_return", sender=":1.50" (uid=0 pid=3132 comm="/usr/lib/NetworkManager/nm-dispatcher.action ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply=0 destination=":1.5" (uid=0 pid=2097 comm="/usr/sbin/NetworkManager "))
Apr 7 21:05:39 linux-kr6c ntpd[3500]: ntpd 4.2.4p4@1.1520-o Mon Jan 19 14:44:51 UTC 2009 (1)Apr 7 21:05:39 linux-kr6c ntpd[3501]: precision = 1.000 usec I have no idea what my machine is doing, but it seems as nothing is happening between 21:03:18 and 21:05:39.
I am trying to send an email by sendmail (ubuntu) to external servers, but unable to send. following is what i am trying to do and what i got the response:
sendmail -v xxx@hotmail/gmail.com < mail.test
where mail.test contains
[COLOR="rgb(105, 105, 105)"]
From: bla@bla.com
[code]....
I use Evolution mail and use 2 PCs When I send mail it saves it to my current PC but not to the other PC so instead i want it to save the sent to the email server i'm using.
View 3 Replies View RelatedI am connected to the internet with a Rogers Rocket Stick, when I want to check my mail in Evolution the "send and receive" tab is not highlighted. It was working yesterday when I was connected through wireless why is that and how do I fix it ?
I installed Ubunto remix on a Netbook but I can not connect my Laptop with ubuntu to my Netbook with ubuntu, both these computers are connected on the network, it asked for the password to be able to connect on both computers but I cant get the two to communicate with each other .... yesterday when I still had windows xp on my Netbook I had no problem connecting the two computers ...
Amongst many other annoyances and problems with my setup, the most major one is as follows:I use evolution on my home computer to manage my email...when i was at my friends house today, i logged in to my mail via godaddys webmail service....after checking my mail and returning home, i notices that some of my new messages that i viewed on the webmail were showing as they should (unread) in evolution...however, a few of the messages were completely absent...i then returned to my account through webmail and sifted through all the emails that were in my inbox(all unread as I havent used the service much as i have always had my computer with me)...i noticed more than a few messages that were there that i didnt receive in my evolution inbox....is that a problem with my email provider through godaddy, or a problem with evolution?evolution often locks up on me and crashes, so i am thinking it might be something to do with it....thinking about switching to thunderbird and hoping for better results, but i am so used to evolution now
View 1 Replies View Relatedafter upgrading to 11.04, natty, I have a problem with rsyslogd.
In previous releases I went to:
/etc/rsyslog.d/50-default.conf
and uncommented the lines under comment:
# I like to have messages displayed on the console, but only on a virtual
# console I usually leave idle.
This was redirecting the log messages to a console I could get to via Ctrl-Alt-Fwhatever.
In natty, this no longer works. When I switch to the relevant console I get a blank screen with a blinking cursor.
The file /etc/rsyslog.d/50-default.conf still exists. A new arrival is also 50-default.conf.ucf-dist which, as far as I can tell is a clone and which I have also modified like 50-default.conf.
The file /etc/rsyslog.conf (configuration file for rsyslogd) exists and its last line reads:
$IncludeConfig /etc/rsyslog.d/*.conf
which presumably should force rsyslogd to read 50-default.conf at startup.
Looking at the running processes I can see that rsyslogd runs.
I always use ubuntu and have lots of important files in there..What happened before?I was working on the comp...pop messages were getting downloaded on evolution mail...pidgin was running...google chrome was running..My version: 9.10Found this somewhere:https://wiki.ubuntu.com/Grub2https://answers.launchpad.net/ubuntu...uestion/107653https://bugs.launchpad.net/ubuntu/+s...4?comments=allWhen i select ubuntu from dual boot screen..It dosen't do the usual thing of asking me some options second one would be recovery mode..It takes me to some Grub loader beta4 (don't remember name)I get to type something as..sh:grub> (type here)something like that.
View 9 Replies View RelatedI just synchronized my hotmail account with evolution and it works flawlessly, however every time I click send-receive it stars to download mail by mail (more than 10,000, so it takes a while) and it won't check if I got new messages until it is done. The first time it happened I thought it was a normal thing, and that evo won't scan ever again from my hotmail account. Does anyone know how to stop doing that?
I have another brief question, I would like to know if there's a way that when I read a message on evolution it will also mark as read the same message on my hotmail account.
I'd like to have a notification icon popup when a new email message comes in. I find that I need to keep the Evolution window open to see the popup notifier, which kinda defeats the purpose of being notified when you've already opened the program and can see the message right there.
View 1 Replies View RelatedMy wife uses Evolution for emailing. I have just set up an new email account for her and the strangest thing is happening. When she sends mail, a copy was going to the old Sent folder for her old account. Fine. So I tried Edit->Preferences->Mail Accounts->Edit->Defaults and pointed the sent mail to the Sent folder in the new account.Now she sends a mail and there is no copy going anywhere! It is not being saved in the old Sent folder or the new.Compaq Presario 610, Maverick 10.04.
View 2 Replies View RelatedDoes anyone know if it is possible to have a folder/filter that will show unread messages?
View 1 Replies View RelatedCan someone explain to me, or if it's even possible, for a Windoz computer to send a message to Linux (or vice versa) and have the receiver act on that message? For example. I have a DOS program running on a win computer that monitors some hardware connected to the parallel port, and heyu home automation running on the Linux. I would like heyu to turn on a light triggered by an event on win.
Can I send a message, via the OS, from win and run a script on Linux? Can I do that from Linux to Win? Once upon a time there was a messaging system called WinPop (circa Win3.1, and Win95) I assume the functionality still exists even if those archaic programs don't. Currently, I make Windoz create a file on Linux, then the Linux box checks for that file once a minute using cron. This works, but I would prefer a cleaner solution.
Is there anyway to send txt messages using skype on ubuntu.or is it still in progress.
View 1 Replies View RelatedI run a PC with mandriva linux (gnome). I have installed evolution as mailer and would like to "import" old messages which are stored in an usb flash memory. The messages come from thunderbird operated under windows vista.
View 2 Replies View RelatedI use evolution on my home computer to manage my email...when i was at my friends house today, i logged in to my mail via godaddys webmail service....after checking my mail and returning home, i notices that some of my new messages that i viewed on the webmail were showing as they should (unread) in evolution...
however, a few of the messages were completely absent...i then returned to my account through webmail and sifted through all the emails that were in my inbox(all unread as I havent used the service much as i have always had my computer with me)...i noticed more than a few messages that were there that i didnt receive in my evolution inbox....
Is that a problem with my email provider through godaddy, or a problem with evolution? evolution often locks up on me and crashes, so i am thinking it might be something to do with it....thinking about switching to thunderbird and hoping for better results, but i am so used to evolution now...