Red Hat / Fedora :: What Is "dbus-daemon"
Apr 21, 2011
I will leave my computer os Fedora 14 running after a period of time I can hear the hard drive is running really fast and using system monitor I see that a lot of the swap space is being used, the only thing that seems to using a lot of memory is "dbus-daemon"Clicking on it I get the following. dbus-daemonProcess ID : 1739Parent:: initParents's ID :1Number of threads : 2Command: /bin/dbus-daemon--fork--print-pid5--print-address 7-- session Any typos mine as I have a screen shot but can not embed
View 2 Replies
ADVERTISEMENT
May 4, 2010
I've just upgraded to 10.04. I love it. I've been running dark themes for a long time and this upgrade merged seamlessly with my setup.There is a nasty problem that I've noticed on only my desktop box (laptop is fine, also upgraded to 10.04). The dbus-daemon is hogging approximately 50% of my cpu cycles. Is there a way to limit this? I'm watching this via the System Monitor and the % CPU. My laptop registers its dbus-daemon % CPU as 0.
View 3 Replies
View Related
Nov 9, 2010
What does this error message in `/var/log/auth.log` mean? It's showing up at about a rate of 1 per second. My indicator applets are missing as are my status bar icons. The desktop icons are flashing on and off at a rate of about 1 per second.
{{{
dbus-daemon: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.1299" (uid=1000 pid=18184 comm="nautilus) interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)"
[code]....
A little prior to this I installed Wine beta using Ubuntu Software Centre, then applied the multiuser wine recipe as noted here [URL] /showthread.php?t=917422&), then installed a game called ToonTalk3 [URL], and then tried to install DirectX 10 as per these instructions [URL]
The directx install stalled with a series of messages about being unable to copy certain dll files. I aborted the install, using the install wizard's abort command. It was a bit after this that I noticed the flashing symptoms. They may have been there earlier but I usually run my apps full screen so wouldn't have noticed.
I've reversed the wine multi-user configure, again using the recipe, and run `sudo apt-get purge wine1.2`, and logged off and on. The flashing and errors still occur.During logon there are bunch of indicator applet error message dialog boxes (which I'll post later after finishing this message and conducting another log off/on cycle). I'm running Ubuntu 10.4 LTS 32bit on an Acer Asper 3500 notebook. The install is about 2 weeks old.
View 3 Replies
View Related
Apr 10, 2009
Each time after boot, I have to wait for proximately 2 minutes before Firefox starts showing any web pages. I believe the delay is caused by the following issue: Code: Apr 7 21:03:18 linux-kr6c nm-dispatcher.action: cript '/etc/NetworkManager/dispatcher.d/netcontrol_global_hooks' exited with error status 1.Apr 7 21:03:18 linux-kr6c nm-dispatcher.action: cript '/etc/NetworkManager/dispatcher.d/nfs' exited with error status 2.
Apr 7 21:03:18 linux-kr6c dbus-daemon: Rejected send message, 14 matched rules; type="method_return", sender=":1.50" (uid=0 pid=3132 comm="/usr/lib/NetworkManager/nm-dispatcher.action ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply=0 destination=":1.5" (uid=0 pid=2097 comm="/usr/sbin/NetworkManager "))
Apr 7 21:05:39 linux-kr6c ntpd[3500]: ntpd 4.2.4p4@1.1520-o Mon Jan 19 14:44:51 UTC 2009 (1)Apr 7 21:05:39 linux-kr6c ntpd[3501]: precision = 1.000 usec I have no idea what my machine is doing, but it seems as nothing is happening between 21:03:18 and 21:05:39.
View 5 Replies
View Related
Mar 24, 2010
when calling 'top' dbus is having load of activity ('dbus-monitor --session') outputs also a lot of action (see attachement). this has effect that my machine is slowing down and normal work takes ages.I have no clue where the activity is coming from. I also had a look at https://bugs.launchpad.net/ubuntu/+s...or/+bug/441828. But there are no unnormal devices plugged in... (just keyboard + cordless mouse).when starting the machine the cpu load is ~9%. After a while (after 1 day) it goes up to 70-80%. the started applications do not change during that time. so i guess somewhere there is a leak.
View 9 Replies
View Related
Jul 5, 2011
when I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).
View 4 Replies
View Related
Jan 24, 2011
do have installed glib and dbus and can find them manually , /usr/include/glib-2.0/glib.h , but while comipling applicaiton it gives following error messages.
/usr/include/libosso.h:32:18: error: glib.h: No such file or directory
/usr/include/libosso.h:38:23: error: dbus/dbus.h: No such file or directory
/usr/include/libosso.h:39:32: error: dbus/dbus-protocol.h: No such file or directory
View 1 Replies
View Related
Jan 13, 2010
When I install a commercial audio into the CDROM drive I get th following: Unable to mount Audio Disc DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered
View 1 Replies
View Related
Mar 17, 2009
I'm not sure what when wrong since I have a few DVDs and they all play well in my normal DVD player, I later attempt to mount it in my Ubuntu 8.10 I'm presented with the following message:
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
May I know what does this really mean?Is there something in my computer that require a fix?
View 2 Replies
View Related
Jan 16, 2010
i'm having a little issue with a small script i'm working on. It's a bash script that, amongst other things, checks the current playing song in Rhythmbox with "rhythmbox-client --print-playing". Now the thing is that if I run the script by hand it works perfectly, but when it's run by cron this part gives the following error:
Code:
(rhythmbox-client:9848): Rhythmbox-WARNING **: /bin/dbus-launch terminated abnormally with the following error: Autolaunch error: X11 initialization failed.It's running on my own cron (crontab -e) set to my user.
View 1 Replies
View Related
Jul 28, 2010
Should I have hal and/or dbus services running when my system doesn't have GUI? For example, in case of a mail/web server where I have console applications only on it.
View 4 Replies
View Related
Oct 21, 2010
I've been having problems with Dolphin hanging on me and I found out that the problem is due to something with dbus 1.2x. So I downloaded the source for dbus 1.3.1 and proceeded to update dbus by incrementally uninstalling and installing all of the packages it requires. Today I noticed that both dbus-libs 1.24 and dbus-libs 1.3.1 were installed, so I went to get rid of the 1.2 version so that yum would stop telling me there was a conflict.
This is what I did:
Code:
su
rpm -e --nodeps dbus-libs
rpm -Uvh file:///root/rpmbuild/RPMS/X86_64/dbus-libs(versionNum).rpm
I ran that once and restarted, but I think that something happened the first time because rather than it replacing the 1.2x version with 1.3.1 all that was left was 1.2x. So I did the same process as the last time, but after removing dbus-libs I forgot the path to the RPMbuild so I closed konsole and tried to open Dolphin. Well, obviously that's not going to work. So then I, even more stupidly, restarted... And now Fedora won't boot up. How do I reinstall dbus-libs without a bootable Fedora?
View 2 Replies
View Related
Oct 4, 2009
First thing after a clean F11 x86_64 install and "sudo yum install gsynaptics" says:
GConf2-2.26.2-1.fc11.x86_64 from installed has depsolving problems
--> GConf2 conflicts with GConf2-dbus
From the verbose output:
gpointing-device-settings-1.3.1-5.fc11.i586 requires: libgconf-2.so.4
--> Processing Dependency: libgconf-2.so.4 for package: gpointing-device-settings-1.3.1-5.fc11.i586
[code]....
How do I resolve the conflict and get gsynaptics installed?
View 4 Replies
View Related
Feb 9, 2010
I have an error with the Firewall in F12. The firewall start in gui, the 1st window: Firewall Configuration startup come but when I close it the following error occur:
org.fedoraproject.slip.dbus.service.PolKit.NotAuth orizedException.org.fedoraproject.config.firewall. auth:
I can do: Redo or Quit ( redo will pop out the same error).
View 3 Replies
View Related
Aug 28, 2009
I'm new to Fedora and have just purchased a subscription to a GoDaddy Virtual Dedicated Server, which I'm able to control using SSH.I have a Java application that I want to run as a daemon on this VDS. Some google searching yielded a bunch of different methods of doing this, none of which I'm sure would be guaranteed to work with Fedora, so I was hoping someone here could give it to me straight and fill me in on the simplest way of doing this.What is the best/simplest way to run a Java application as a daemon on Fedora?
View 2 Replies
View Related
Mar 12, 2011
I was trying to get a daemon to load on boot, I stupidly added it to rc.local and it just hangs. I would love to put in a live CD and edit out the line but the volume is encrypted and I cannot get it to mount.
Is there a way I can cancel the daemon from loading or get to the grub menu (not readily visible since I am single boot) and then boot into a console?
View 5 Replies
View Related
May 5, 2011
i installed transmission on my fedora14 VPS for headless usage by "yum install transmission transmission-daemon", problem comes when i try to configure the init.d Scrip for transmission-daemon to run as a different user instead of the pre-specified user �transmission�,how should i modify the default transmission-daemon file bellow?
Code:
#!/bin/bash
#
[code]....
View 4 Replies
View Related
Dec 17, 2009
have a fresh install fedora 12 on dell latitude needs xfree for the dell moniter drive. Have installed to the point of autoconfig, get an error dbus service must be restarted. have no idea how to do such. it is a init 1 install. if i reboot here the system gives a black screen and typable screen but goes no futher. what do i do?
View 12 Replies
View Related
Dec 17, 2010
I'v just installed wicd. I can't get it to sart, I get errors saying that wicd couldn't connect to it's dbus interface and the wicd deamon has shut down. Then there's a report from SELinux saying that it's preventing /usr/bin/python "write" access on /etc/dhcp/manager-settings.conf and that access is denied to wicd. I can get wicd to start if I su to root, but I'd like to not have to do that every time I boot. Is there a fix?
View 1 Replies
View Related
Nov 24, 2009
I've been trying to get my internal microphone to work in F12, and as part of the things I've tried I had the seemingly bad idea of reinstalling pulseaudio. The problem now is that pulseaudio fails to start... The following is from /var/log/messages, and is repeated several times:Code:Nov 24 08:51:20 localhost pulseaudio[6300]: main.c: Daemon startup without any loaded modules, refusing to work.
View 9 Replies
View Related
Jan 7, 2010
I have fedora 12 32 bits installed on a Macbook pro (intel core duo) I did "yum update" this morning, I have restarted the system and got the following message:Starting abrt daemon: abrtd: Failed to start: got sig 2 FAILEDI have browsed in the web but I cannot find useful information. Then I typed:$rpm -qa | grep abrt
abrt-libs-1.0.0-1.fc12.i686
abrt-libs-1.0.3-1.fc12.i686
abrt-addon-kerneloops-1.0.3-1.fc12.i686
[code]...
View 2 Replies
View Related
Jan 23, 2010
I'm having some problems getting my screensaver to work automatically.If I start the screensaver config program then it gives me this message: "The XScreenSaver daemon doesn't seem to be running on display ":0.0". Launch it now?" If I click yes then my screensaver works exactly as expected.How can I get the XScreenSaver daemon to start automatically?
View 3 Replies
View Related
Jan 25, 2010
I using Fedora 12. When I am going to start MySQL server then error is come
MySQL Daemon failed to start.
Starting MySQL: [FAILED]
MySQL Details :
mysql-5.1.42-2.fc12.i686
View 7 Replies
View Related
Jul 19, 2010
I'm having trouble booting after a recent bunch of updates (haven't been able to boot F12 from hard disk for a couple of days). The boot process gets as far as "NetworkManager daemon [OK]", then just stops. I get this for all 3 kernels that I can choose from the grub menu (2.6.32.16-141, 2.6.32.14-127, 2.6.32.12-115)Mounting the hard drive with a liveUSB, a quick inspection of /var/log/messages reveals that things go smoothly until: etc. until I hit the power button.I ought to mention that I wireless card that requires the Realtek RTL8192SE driver, which requires
Code:
sudo su
make
[code]....
View 1 Replies
View Related
Jan 17, 2011
My sample rates are out of whack and I need to edit the daemon.conf file.
However if I use
Code:
It will open the file but will not let me edit at all. If I just navigate to it I can edit it, but I can not save it!
I tried going in as root from the terminal and using the code above and I get a weird error.
Something like:
Then it says core dump.
Am I missing something to be able to edit the daemon.conf ?
View 2 Replies
View Related
Feb 6, 2011
is there any way i can get Ubuntu's Notify OSD on Fedora 14? or at least get some nicer themes for notification-daemon?
View 1 Replies
View Related
Mar 24, 2010
I have a strange problem on RHEL 5.4.
I have created a daemon which is being run as a system service at boot, and the start command goes well. When I login after boot and check with
service name status
it says it's running and the daemon accepts requests from clients in the network, only the executable it runs as a response to a client request does not work properly.
If I manually restart the service, as with service name restart everything works OK until the next system reboot.
Somehow the context in which the daemon runs is not OK after boot, and it becomes OK after manual restart.
View 9 Replies
View Related
Jul 7, 2010
I have a java program which I need to run as a service or daemon. What is the most stable method to do it? It will be heavy processing socket programming which will be continously receiving data?
View 4 Replies
View Related
Mar 5, 2011
I'm looking for recommendations on how to increase the nofile limit for a daemon running as other than root. Does anyone else do this? It'd be nice if I could employ /etc/security/limits.conf.
View 2 Replies
View Related
Mar 5, 2009
I just got the problem while starting the dhcp daemon. Its showing failed. I need to start it for my clients to be autoinstalled. I am having CentOS 5.2 linux. I've installed all optional packages also while installing CentOS. How to start the dhcp daemon? I've tried the /etc/init.d/dhcpd start also. But it didnt work. Showing Failed.
View 1 Replies
View Related
