Ubuntu :: Vlc Wont Save Video Deinterlacing Mode?
Mar 10, 2010vlc wont save video deinterlacing mode?
View 5 Replies
ADVERTISEMENT
Ubuntu Multimedia :: Mencoder Motion Compensation Deinterlacing
May 24, 2010Is the motion compensation deinterlacer missing in Ubuntu's Version of Mencoder?
mencoder -vf help doesn't show it (I guess this means it's not installed...), although mencoder's man pages do have an mcdeint entry.
I have those versions installed:
Code:
I first tried the Versions shipped with Ubuntu Lucid Lynx, then I installed them from the Medibuntu repositories. Both without any success. Does anyone know, how to enable mcdeint support? Is there a repository or something I could add to my sources?
Ubuntu :: How To Save And Exit Root Mode
Aug 16, 2010I've re-set my password in recovery mode: now how do I save my changes and exit to a normal boot up ie to my desktop? Right now my screen shows "username@Username-desktop:~$"
I've also done a sudo apt-get updates and sudo apt-get desktop for good measure. But how do I get out? If I force quit the change is not saved and I cannot log on.
Ubuntu :: System Not Booting (Strange Power Save Mode)
Jul 31, 2011Out of nowhere my computer will not boot up. I get the message like this
NMI received for unknown reason 29 on CPU 0.
Dazed and confused, but trying to continue
Do you have a strange power saving mode enabled?
NMI received for unknown reason 39 on CPU 0.
Dazed and confused, but trying to continue
Do you have a strange power saving mode enabled?
I read something about it being the video card, so I took my old one out which it being an ati, an replaced it with an nvidia.
Fedora Hardware :: Monitor Not Going Into Power Save Mode
Jan 26, 2009I have a Dell Precision T3400 workstation (Nvidia Quadro NVS 290) with the kmod Nvidia driver installed. Everything works fantastic for power saving, the screen saver comes on , then the monitor blanks after a while. The only problem is that the monitor itself (Dell E228WFP) never goes into standby. The power LED stays green instead of orange. Worked fine under FC8, only noticed it recently under FC10.
View 2 Replies View RelatedGeneral :: Power Save Mode During Rhel 6 Installation?
Jan 8, 2011i am trying to install rhel 6 (86*64) on my windows 7 (AMD Sempron 145 processor) using DVD iso image. after selecting keyboard language and it goes to ther rest of the process for 20 seconds and then the monitor goes to power save mode. trying to input with keyboard or mouse does not seems to be helping. i have changed my windows 7 powersave options to "never".
View 8 Replies View RelatedUbuntu :: How Do You Save Video With Subtitles Still On It?
Apr 6, 2010i'm currently subtitling a jpop music video and i was wondering:how do you save the video with the subtitles still on it? i'm half way through subbing, and i want to upload the video to videos with the subtitles attached but.how? i can only save them as separate files, and not singular.
View 4 Replies View RelatedUbuntu Multimedia :: How To Save VLC Video
Apr 10, 2011I have managed to play a vcr tape and view it on vlc.
how to or tell me how to save this video to a file.
Also how do you save the vlc setup as the default.
Fedora :: Make The Display To Turn Off When The System Enters In Save Energy Mode?
Sep 4, 2010I installed fedora 13 in its LXDE flavor in my laptop. I noticed when it goes to save energy mode, the TFT retro-illumination is not turned off. The display just stays black with light. How to make the display to turn off when the system enters in save energy mode?
View 4 Replies View RelatedUbuntu Multimedia :: Mplayer Save Broadcast Video?
Mar 9, 2010I would like to save a broadcast video with mplayer but I want do it while they are seeing, I mean, I want see them in real time, but also recording them and see them when I want I've actually got with audio files with:
Code:
mplayer http://whatever/audio -ao pcm:file=/home/user/audio.mp3 It works perfectly, I listen to the audio file from the radio I connected and save the file. But I can't with video, I tried: Code: mplayer http://whatever/video -vo x11 -ao pcm:file=/home/user/video.mp4
Ubuntu Multimedia :: Save A Video From Firefox Page Cache?
Oct 17, 2010while i realize it's certainly taboo to download a lot of videos videos and similar without permission, and possibly illegal in some countries due to copyright, i have also been reading that the video is clearly buffered in the page casche, so technically is stored on your machine already, but is only stored in ram. how can i save it from my firefox page casche? some mitigating info is that i have poor web speeds, and an old machine, which is not using all of the 1gig of ram for some reason.
View 4 Replies View RelatedUbuntu Multimedia :: Downlaod And Save Realaudio Video Files?
Feb 11, 2011Is there some idiot-proof (I'm the idiot) way to download and save real audio video files
View 3 Replies View RelatedUbuntu Multimedia :: Pipe A Video Feed From Virtual Box To Vlc And Save It As A File?
Aug 9, 2011is there a way to pipe a video feed from virtual box to vlc and save it as a file? cause if i could then i could save streaming videos from places like hulu and netflix or save bluray movies to a avi file for latter use.
View 6 Replies View RelatedUbuntu Multimedia :: Any Video Editing Program That Can Save To Uncompressed File Formats
Aug 4, 2011I would like to ask if there is any video editing program that can save to uncompressed file formats.
View 5 Replies View RelatedUbuntu :: Video Mode Not Supported ?
Aug 7, 2010I have windows 7 64 bits and i'm trying to install ubuntu 10.04 amd64. The installation was good but when i'm trying to boot on ubuntu i have a black screen with a message "mode not supported".
I've looked for the problem on google. The solution is to change the frequency of the monitor. Mine supports only 75htz max and on the error message I have 77htz, what's why it's not supported.
The problem that to change the frequency for lunux i have to be logged in linux in order to type commands in the terminal.
But I can't see a thing, only the message about the mode not supported, so I can't type anything.
I found some solutions here but i can't do what they ask, because I can't boot and the message doesn't disappear. [url]
Ubuntu :: Video Mode Not Supported / Get It To Work?
May 28, 2010Tried to install the ATI proprietary drivers (fglrx), but when I boot up, all I get is "Video Mode Not Supported". I suspect my refresh rate or resolution is the problem, but I don't know how to change it from the terminal (ctrl-alt-f1)
View 9 Replies View RelatedUbuntu :: Cannot Display Video Mode (after Update)
May 8, 2011I am running a dual boot system. I have XP on one HD and Ubuntu 10.04 on the other. No problems. I boot back and forth all the time. Then came along Natty. Now I tried to boot over, and I get "Cannot display this video mode". I have it set up that when I restart, if im away from the computer, Ubuntu starts by default. So it eventually starts in ubuntu. But the screen where I used to be able to choose which operating system to boot into is now replaced with "Cannot display this video mode".
I am not wireless, and nothing has changed as far as hard wear. The monitor is some old Dell that worked perfectly fine with 10.04. I tried changing my resolution and settings to every different one, and restart, and still no dice.
To sum it up, after my update to Natty, when I reboot, my OS selection screen is no longer visible. Its now replaced by "Cannot display this video mode".
So now it seems, what ever setting this screen is running on, XP dont like it..... because of Natty?
I gotta get some work done in XP, so right now im screwed. My CRT is currently sitting outside in the rain. Or I would try it.
Ubuntu :: Running On Low Video Mode After Fresh Install 9.04?
Jan 28, 2010i get this message both when booting from the live usb and once installed (i am asked to chose low graphics mode, or to reconfigure X):
Ubuntu is running in Low graphics mode. error: update configuration to solve
(EE) intel(0): output LVDS enabled but has no modes
(EE) intel(0): no valid modes
(EE) screen(s) found, but none have usable configuration.
Ubuntu Installation :: Wrong Video Mode After 1st Install
Jun 16, 2010I just received a band new DELL laptop with a blank disk and installed Kubuntu Lucid Alternate 64 on it. No problem during install (the only option I specified was for an encrypted LVM), but when I try to boot all I can see are colored lines scrolling/blinking on the screen. If I press any key it changes to white text (unreadable) scrolling/blinking.
If I press a key during the boot and get into grub, I cannot edit the boot options, cannot go to command line, cannot use MemTest86 (maybe because the partition is encrypted). Booting with the recovery mode shows the same lines. Edit: if I try to boot with the standard LiveCD, I get the same mess, so it's abviously a video card problem. Damn, I had checked beforehand that Ubuntu could run smoothly on it.
Ubuntu :: Choppy Video In Full Screen Mode
Oct 3, 2010Just one little issue. I have noticed the video is choppy in full screen mode. I have found this problem discussed on other forums but have had no luck. I installed wubi over top of windows xp. My computer is a P4 3 Ghz with 1.5 G of ram. 80 Gig hard drive. I currently do not have a video card installed.
View 4 Replies View RelatedUbuntu :: Freeze After Switching Video Mode During Boot ?
Oct 8, 2010I just bought an Asus TS mini server. It has an Atom CPU (N280), and an Intel 945 chipset.
I installed Ubuntu Server Edition 10.04, that went smooth.
But on first boot, I see it hanging just after it mounts the swap. Now I don't think it has anything to do with that, the problem seems to me that at that point, it also switches the video mode. I guess that's where the problem is caused. It just freezes, no kernel panic, no reaction to the keyboard.
The system is dual boot, and the other OS is Windows Home Server. I put an ext fs driver there, and tried to read the logs, but don't get a clue from there. In particular, syslog doesn't even exist. Also no X log.
Ubuntu :: Analog Input Cannot Display Video Mode
Jun 4, 2011My problem is on bootup and shut down I get: analog input cannot display this video mode. I've got a dell monitor nvidia graphics card. Don't really know how to provide much more info than that. From what I've searched on the net is that it probably has to do with the refresh rate.
View 4 Replies View RelatedDebian :: Cannot Display Video In This Mode
Mar 14, 2010I just installed Debian stable on my desktop computer and when I start it up I get a blank screen that says cannot display video in this mode.
View 9 Replies View RelatedSlackware :: How To Set Video Mode At Boot
Oct 13, 2010How can I set a video mode when slackware starts? Instead of having to select one each time or wait 30sec.
View 10 Replies View RelatedUbuntu :: Force Console Video Mode With Grub2 - No Monitor
Mar 25, 2010I run a number of Ubuntu 9.10 boxes attached to multiple daisy-chained KVMs. None of the PCs are using any GUIs - they all run in console mode. I often reboot them remotely via an SSH session, etc. If a monitor isn't actually active on the PC when it reboots, Grub2 uses a low-res video mode, despite having a higher-res video mode set correctly in Grub2's configuration. If I reboot WHILE THE MONITOR is attached to the Ubuntu PC via the KVM, the video mode is set correctly as configured in Grub2's config files. If I reboot WITH NO MONITOR attached, the video mode is ignored and I'm stuck in a low-res mode next time I attach to the PC via the KVM. How can I force Grub2 to honor the configured graphics setting, despite not having a monitor present at the time it boots?
View 1 Replies View RelatedUbuntu :: Ultra Low Video Mode / Roll Back Changes I Made?
Sep 15, 2010In an attempt to install specific video drivers for the Intel 845 chipset, I followed the instructions here: http://www.downloadatoz.com/driver/a...ntu-10-04.html
Now, the system will only boot in recovery mode, and then at 640x480 resolution. When booting, it gives the option to return to default or manually configure, but if I try to select either option and click OK, nothing happens. Once in the GUI, it shows no proprietary hardware drivers installed. Is there a way to roll back the changes I made, or return to more default settings without reinstalling the OS?
Ubuntu Multimedia :: Cannot Display This Video Mode After Grub Screen
May 29, 2011I use natty 64 bit. I installed a HD 4870. Installed the drivers according to instruction on [URL]. I ran aticonfig --initial. Still I get "Cannot Display This video Mode" after the grub screen, during boot up. Monitor preferences applet doesn't seem to work, either - it won't detect the monitor parameters EDID thing.
When I try to open the Catalyst Control Centre I get:
p, li { white-space: pre-wrap; } "There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following.
No ATI graphics driver is installed, or the ATI driver is not functioning properly.
Please install the ATI driver appropriate for you ATI hardware, or configure using aticonfig."
Here are chunks of xorg log (I cut the non video bits).
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[210.874] (II) LoadModule: "extmod"
[210.875] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[210.875] (II) Module extmod: vendor="X.Org Foundation"
[210.875] compiled for 1.10.1, module version = 1.0.0
[210.875] Module class: X.Org Server Extension
[210.875] ABI class: X.Org Server Extension, version 5.0 .....
OpenSUSE Install :: Undefined Video Mode 346 ?
Aug 16, 2009While booting SUSE 11.1 64-bit I get these messages:
Code:
Probing EDD (edd off to disable)
Undefined video mode 346
Press Enter to see video modes available
And then a 30-second wait.
Is it advisable to set edd off? If so, how?
Would that get rid of the 30-second wait?
The video card (NVidia GeForce 6150 LE) and the monitor (ViewSonic VA2216W-4) seem to work fine with SUSE, so I don't understand the "Undefined video mode" message.
Having said that, I've seen much better text-rendering than, for instance, this messageboard. See attached image. Could that be a card/monitor problem? It looks better in Vista with the same hardware. So does Firefox in general.
Slackware :: Undefined Video Mode Number ?
Jul 15, 2011I run both slackware and the stupid OS "windows " on my laptop, after choosing Slackware -> Loading tux Read BIOS data check succesfull. Undefined video mode number:? Press enter to view a list or space to ...... (actually i don't remember " or wait 30 seconds.
I press enter and select a video mode then continue loading , but i dont want to do that every time so i edited lilo.conf and changed vga = ? to different numbers but it did not work.
Ubuntu :: Setup The Correct Mode For Laptop-video Card-monitor?
Aug 8, 2010setup the correct mode for my laptop-video card-monitor
Video card - ATI mobility Radeon X1600
External Monitor - Belinea b.display 2 22"
Right now the external monitor is working, but sometimes it goes black for 2-3 seconds and then works again. This happens sometimes 5 times in a row, sometimes once, sometimes none. Other issue, when I install any new kernel it doesn't work. I get weird picture on monitor.