Ubuntu Multimedia :: How To Save VLC Video
Apr 10, 2011I have managed to play a vcr tape and view it on vlc.
how to or tell me how to save this video to a file.
Also how do you save the vlc setup as the default.
I have managed to play a vcr tape and view it on vlc.
how to or tell me how to save this video to a file.
Also how do you save the vlc setup as the default.
I would like to save a broadcast video with mplayer but I want do it while they are seeing, I mean, I want see them in real time, but also recording them and see them when I want I've actually got with audio files with:
Code:
mplayer http://whatever/audio -ao pcm:file=/home/user/audio.mp3 It works perfectly, I listen to the audio file from the radio I connected and save the file. But I can't with video, I tried: Code: mplayer http://whatever/video -vo x11 -ao pcm:file=/home/user/video.mp4
while i realize it's certainly taboo to download a lot of videos videos and similar without permission, and possibly illegal in some countries due to copyright, i have also been reading that the video is clearly buffered in the page casche, so technically is stored on your machine already, but is only stored in ram. how can i save it from my firefox page casche? some mitigating info is that i have poor web speeds, and an old machine, which is not using all of the 1gig of ram for some reason.
View 4 Replies View RelatedIs there some idiot-proof (I'm the idiot) way to download and save real audio video files
View 3 Replies View Relatedis there a way to pipe a video feed from virtual box to vlc and save it as a file? cause if i could then i could save streaming videos from places like hulu and netflix or save bluray movies to a avi file for latter use.
View 6 Replies View RelatedI would like to ask if there is any video editing program that can save to uncompressed file formats.
View 5 Replies View Relatedi'm currently subtitling a jpop music video and i was wondering:how do you save the video with the subtitles still on it? i'm half way through subbing, and i want to upload the video to videos with the subtitles attached but.how? i can only save them as separate files, and not singular.
View 4 Replies View Relatedvlc wont save video deinterlacing mode?
View 5 Replies View RelatedI want to watch a certain video on [url]...., but I get an error message instead. Some videos can be played, so I'm thinking it's a form of restriction, but I can't be sure.I tried using a few proxies, but on some the error message persists and on others the video doesn't load. I'm running Ubuntu 9.10 and Firefox 3.5.8.
View 2 Replies View RelatedI have two seperated video clips, that captured same event from two cameras. i would like to create one clip, that will show one on the left side, the second on the right side, and play together.
View 8 Replies View RelatedWhen I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
is this possible? Or does one have to use the binary blobs?
View 1 Replies View RelatedI have a video file in which the audio runs faster than the video, so they quickly go out of sync. The way to fix it would be to separate the audio and video streams, speed up the video (the audio is FINE, it's the video that's wrong), and then recombining them. What is the easiest way for doing that?
View 7 Replies View Relatedvideo playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
this happens with both VLC and Totem, when in either of those programs playing a video, if I click on one of the top menus, say View in Totem, the video stays on top of the drop down options. In order to see the options I have to hover over them with the mouse at which point they become momentarily visible. I read a post somewhere where someone had a similar problem and it was solved by reinstalling Compiz, but I've tried uninstalling it entirely, reinstalling it, etc. and none of it works. It doesn't happen with flash videos in firefox, it does happen with visualisations in Totem, and it only started happening since I upgraded to 11.04.
View 4 Replies View Relatedthe movie i downloaded plays for only 19 sec and stops saying you will be redirected to microsoft download page. the file is 700 Mb. i installed w32 codecs after searching through many threads but still my vlc doesnt play the file.
View 1 Replies View RelatedI'm using 9.10 on acer aspire one (not the netbook remix).im using the default messanger client empathy.everything else works fine but when i try to video chat the video chat begins but if the other person even moves a litte or even nods his head then the video becomes so choppy that u cant see anything and then after 5 min comes back to normal for a second or two.i have all the latest updates and gstreamer0.10-ugly-multiverse which is required for video chat b/w empathy and gtalk.
View 1 Replies View RelatedMy system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
Phenom 9500+ quad core, 3GB RAM, Nvidia 8800GT: 260.19.36 driver.Installed the latest Boxee for Linux. Got my remote setup. Everything works except when I open a video it opens in a tiny box in the upper left hand corner of my monitor.Is there any way to get Boxee videos to play full-screen?
View 6 Replies View RelatedJust installed Ubuntu 10.10 on an old Dell Dimension 8400 with an ATI RV370 Radeon X300 video card and 512MB of Ram. The video seems to go very fast and skips. I followed the Comprehensive Multimedia & Video Howto but still have the same issue. I have also read many posts but I have trouble understanding some of the responses. Could it be the low amount of RAM?
View 1 Replies View RelatedI have an integrated intel video and latest xserver-xorg-video-intel driver(using only stable repo). Now I wanna watch high-res video. From the bits of info collected from all over internet I understood that I need to:
1.aptitude install libdrm libva.
2.compile or find the .deb mplayer-vaapi and install it.
3.add -vo vaapi -va vaapi to the mplayer command line in gnome-mplayer.
My question : is that correct or did I miss something? Do I have to compile latest libdrm and libva or the ones from the squeeze repo will be good? Do I need kms enabled, i.e. install firmware-linux-nonfree?
OpenSUSE 11.1, 64 bit, 2 cores, intel graphics, 4 GB of RAM:_no_ problems
OpenSUSE 11.4, 64 bit, 4 cores, nvidia graphics, 16 GB of RAM:
Problem is very similar to: Problems playing mkv HD films in opensuse but not windows but with enough differences that I start a new thread:
* playback in VLC does not work -- there is only sound
* playback in SMplayer works, however -- when I scroll forward, the video freezes and sound continues, to unfreeze video I have scroll a tiny bit backward
I tried changing the video ouput driver (in SMplayer) from xv to xv/noveu-nvidia, it didn't help. Please note, that I use the same settings (initially) as before in OS11.1.
I been looking on Google to convert videos to mp3 audio and all I get is just a video conversion from one format to another and some things I installed just get error messages so I took them back off. Anyone know the proper syntax in Mencorder to convert a video just to audio? Or any other program I can use that won't cause this much trouble?
View 7 Replies View RelatedI found that setting the video output module to opengl works very well. The only problem now is that vlc keeps changing my setting back to "default" rather that "opengl" or "x11".How do I force it to save my settings?
View 1 Replies View RelatedHow does one save files in MP3 (or MP4) format.This would apply to converting an existing audio file to MP3 or to ripping a CD.This question must be as old as Ubuntu, yet I find very little in our forums. What I do find, refers me to items that don't seem to be in the repositories anymore, so perhaps someone in the know can update us again.Yes it is lossy and proprietary, but it's fine for speech and produces a much more compact file than flac. Also, flac and ogg are not well known to non Linux users, programs and equipment. So, for compatibility, I often want to convert flac to MP3.
View 4 Replies View RelatedI need to save some clips from a DVD as either a DV-AVI or DV-MOV format. What program can I use to do this?
View 4 Replies View RelatedI need to give a non-technical user very basic steps on how to copy/burn a folder to a blank CD. This is a senior citizen using a Ubuntu 10.04 desktop. That folder contains over 500 Mb of digital camera JPG pictures. What are the easiest instructions that I can give over the phone?
View 2 Replies View RelatedMy CentOS installation correctly recognize my video card and my monitor if I go to System->Preferences->Screen Resolution and set monitor refresh rate to 75 hz, everything works fine, but if I reboot, at startup refresh return to 60 hz.How can I save refresh rate value?
View 4 Replies View RelatedI am running VLC release 1.0.2 and I am unable to save a playlist. Does anyone else have this problem and/or know of a fix?
View 9 Replies View Related