i came upon this wireless card and i wondered if its any wheres near possible to make it work since the netgear PC card wont function properly on the laptop.
View 1 Replies
I am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
I have an Inspiron 1300 and have followed the "B43" instructions here:URl...Plus various other guides including the "one click b43 fix" but nothing useful happens. Wired access doesn't work either.
View 4 Replies View RelatedCan't play midi files on my Dell Inspiron 1300. Do I need another application?
View 4 Replies View RelatedI have a Dell Inspiron 1545 computer. I boot into Ubuntu with a flash drive. When I boot, I cannot connect to a wireless network. No available networks are displayed (and I know my router is on) and the Network Manager icon displays no bars. I suspect that the Dell Wireless card (having a Broadcom BCM-4312 chipset) needs a driver. I have tried to intstall both of the restricted drivers (BCM STA and 43xx drivers), but with no success. I have run lspci in Terminal, and got many lines of text. Here are the lines that look relevant to me:
Code: 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) In Windows 7, everything is just fine. In Ubuntu, my wired connection works like a charm, but is not really accessible. Basically, I have to connect to wireless in Ubuntu or I have no reason for having it.
I recently installed Xubuntu on my old P3 laptop (Compaq Armada E500 if anyone is familiar). The laptop is a bit old, so both wired and wireless networking is done via PCMCIA cards. I have 2 cards installed, one for each purpose. I can't find the dongle for the wired card right now, so I am trying to use the wireless card. I am able to find the network I want to connect to, and type in the password since the network is secured. It tries to connect but then pops up again asking for the password (I know it is correct). Is this card supported by linux/compatible? I tried finding drivers online but the sites that had drivers were down.
View 1 Replies View RelatedMy Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
View 9 Replies View RelatedI recently migrated from ubuntu 10.10 to xubuntu 10.10 on my Dell inspiron 1100. After many tries I "succeed" (with internet) in solving partially the issue related to the video chipset (Intel 82845G Graphics) by using a "vesa" driver in the xorg.conf. Some discussion here mentioned the possibility of deleting ASCI 8086:2562 from a blacklist in usr/bin/compiz but even with ghex editor I could not find any matching string. Hereafter my grub and xorg.conf for those who are interested. I have another issue now. How can I create an iso file of my installed xubuntu. I did download ubuntu 10.10 and created a CD but I migrated after to xubuntu (since most of the files were there) and it would be great to burn a CD of xubuntu.
[Code]...
I have an old laptop, and am a basic linux user, but this install is crazy. I know that I have to have acpi=off to work, and got Linux Mint 7 installed from the live cd but want Xubuntu. The Xubuntu 9.1 live CD works fine as long as I put the acpi=off parameters in the boot string, and I check the additional options just to be sure. But after install I cannot even get into the grub, it says grub loading for a split second then blinking cursor
View 2 Replies View RelatedWhen i try and go on my wireless internet it just keeps connecting then says not connected. I just installed ubuntu and i would really like to try it to its fullest .
View 3 Replies View RelatedI am trying to install my Linksys Wireless-B WPM11v4 card on Xubuntu. I think my main problem is stemming from ndiswrapper not cooperating. It won't install, and something to do with ndiswrapper errors up when I install ndisgtk, which makes it work incorrectly. I think I have the proper driver (I downloaded it from the linksys site. I have the one from the cd, but most of what I said suggested against using it). I have gcc installed and updated (so it tells me). There's a possibility I have not blacklisted something I need too... But I gave myself root access, and edited the blacklist file to block out wireless drivers (I think? I believe that's what the walkthrough I was reading told me to do. It's on WifiDocs? I can't link to it yet.)
I have tried to do it all myself, and I have managed a couple things so far, but I only ever began touching Linux about... 4 days ago? Tops. I would really appreciate anyone's help.
XD
So what I am specifically asking is, can someone identify where I am going wrong, and tell/point me something to fix it? My goal is to install the wireless driver.
i am having trouble installing xubuntu 10.04 with my evga geforce 6200 video card. My motherboard has the onboard intel 845g? card. The computer will not read the live cd with the video card installed. it hangs on the splash screen right after choosing " try without installing" i have tried nomodeset but that dose not help. I have no problems installing with the video card removed. My computer i a hp pavilion a647c.
View 2 Replies View Relatedstill stalling after all those months, everything is explained here
[URL]
the card works fine in xubuntu jaunty, doesn't in xubuntu karmic or ubuntu karmic. i (my wife) wants to use ubutun karmic, but we still can't get this ATMEL PCMCIA wirelesscard to work on ubuntu karmic like it does on jaunty... and we have the windows INF drivers
I installed an hp 1300 AIO printer on Ubuntu 8.10. The printer copies fine, so I know that it has ink. However, whenever I print the printer will look like it is printing but will not actually put any ink on the page. Is there anything I can do to fix this? I ran sudo hp-check -r and these errors came up---
Checking PyQt version...
error: NOT FOUND OR FAILED TO LOAD!
Checking SIP version...
[code]....
After about a week of successful running Xubuntu 10.10 off a live USB Firefox suddenly fails to work with the message "Firerfox can't find the server" Opening the error terminal in firefox yielded the message "Livemark Service: feed processor recieved an invalid channel for http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml"
View 2 Replies View RelatedI have 2 laptops, one is a Acer travelmate (running xubuntu) and another one is a Dell studio (Running Windows 7). I also have an iMac..2 external hard drive and a BSNL 3G usb data card. I want to setup a network so i can share my files and internet connection between the 3 systems. I don't know what i want to do is possible or not. what i want to do:
1) connect the usb data card to Acer and share the internet connection using the inbuilt wireless card in the laptop so that the dell and imac can access it.
2) connecting the 2 ext. hard drive to Acer and sharing the files over the same connection( wireless connection used to share internet with other systems) so that i can access the files from my dell and imac. I want to mention that i don't have a router.
if yes..how? and if not why? i'm a newbie..so plz help me..earlier also this forum helped me a lot in learning linux..hope this time also i will have some good experiences.
Just installed Ubuntu 9.10 after vista I never want to go near windows again, I want to make it clear I am a complete novice at this, wouldn't know what a command line was if it jumped up and bit me on the bum, let alone how to edit one.
Installed an HP PSC 1300 all in one printer, system sees it, installs it without any trouble, as soon as I try to print it just hangs there in pending till it defaults and I get communication error 5012, also the message /usr/lib/cups/backend/ hp failed.
I have removed and re-installed the printer and the latest version of hplip more than once but am getting nowhere, the printer and cable work fine when attached to my laptop which is running xp until i learn more about Linux.
Its a Dell Inspiron 1300 Laptop. 1.8GHz Pentium M, 2GB RAM, 160GB HDD, and some form of Intel graphics. The wireless card in question is a Dell TrueMobile 1300, with a BCM4306 Rev02 chip.Installed 10.04 LTS, updated it all on wired connection, then enabled the bcm43legacy drivers that were in the Hardware Drivers box, and it all worked fine. First thing I did was try to install some media codecs, and noticed they went slow on wifi, and swapped to the wired connection again. I thought it might just be slow servers, but I instantly got an extra 200kbps just by wiring. I try browsing the web, but its extremely slow and sometimes Firefox stops responding. I then begin to install WINE, and it complete stops loading, so I watch the net traffic when I hit a search in FF. Nothing goes out. I hit it a few times more, and finally it'll send something and receive something, but still VERY SLOWLY.
Its not a local problem, as other computers and laptops can connect fine with good speeds. Just wondering if this is normal, or if there's any other drivers to try, or if there's something I'm doing wrong here. I'm kind of a linux noob, but I'm for defs not a computer noob. But since I can't be guaranteed the drivers work with my specific card, who knows?
I have an older Dell Inspiron 4550 w/ 2G memory and 38G HD. I believe I have GE440 graphics card. I am running 10.04, but the graphics are slower than I would like and when I tried to upgrade to 10.10, my card was not supported and I had to re-install 10.04.
- Can anyone recommend a good graphics card to choose for an upgrade for this machine?
- Is changing graphics cards pretty much the same as installing a memory chip, What is the best way to do the upgrade?
I have a dell XPS m1530 which I think has an Intel wireless card (iw3945 i think). It's been giving me intermittent troubles since I bought it a few years ago, but never that bad.Recently it's been getting worse, and since ubuntu doesn't have the in-depth tools that windows vista did for resetting the wireless adaptor, it's been more trouble since switching.
I'm thinking of replacing the card altogether. I'd like to know if it's possible to remove and replace it for my laptop, and what kind of card would fit and work well with ubuntu.What would you guys recommend?PS- looking around the net it seems like this card has a lot of issues, is this just a badly made wireless card?
I recently upgraded my old Hauppauge TV Card (BT878) with a HVR-1300. Whilst the older card worked OK, I am struggling to get the new card to work, despite it seemingly having installed OK in YaST.
View 2 Replies View RelatedI just upgraded my graphics card to something faster... (well as fast as you can go with only PCI-X slots)
I noticed when in OpenBox glxgears get's about 1300 FPS and the HELI-X simulator about 40 FPS.
But if in compiz I get 400 FPS in glxgears and 6 FPS in HELI-X.
Is there something I've configured wrong? Why would compiz FPS go down so much, should glxgears be about the same?
So I bought a used Dell Precision 390 Workstation and installed Ubuntu 9.04 on it. Everything seems to work fine, except for the built-in network card. Well, the graphics don't really work right, either, but I rather expected that, and I'll get to it later.
Anyway, when I boot Ubuntu and try to get on the internet, it says I'm not connected. When I open Network Tools, in the "Devices" tab, I get three Network device options: Loopback Interface, Ethernet Interface (eth0), and Unknown Interface (pan0). When I click on the ethernet device option, it shows me the hardware address of the interface, that it has multicast enabled, and that it is "Active", but I get no IP address.
Is there something really stupid that I'm missing? Do I need to do something special the first time I hook up an ethernet cable? I don't seem to remember having to do that on other Ubuntu boxes.
I finally got around to trying Ubuntu 10.04 on a "decommissioned" Dell Inspiron 8100 1.2Ghz P3 512MB RAM 40GB HD... and Ubuntu is absolutely AMAZING compared to Windows! I'm a Mac guy and honestly Ubuntu gives 90% of the Mac OS GUI and 0% of the "brain damage" of WinBLOWS...
The only thing missing in this laptop is WiFi which I want to do via one of the PCMCIA slots since the mini-PCI is a combo 10/100 network + v.90 modem card... and I need to keep the Ethernet port and fax modem capabilities.
What are the best "Plug n Play" PCMCIA WiFi cards for our "G" and "N" WPA2 ONLY Airport Express WiFi network? I'm new to Linux so I'd really like to avoid editing and replacing system files and drivers if possible to get a PCMCIA card working. I'd also like a card that works in WinXP Pro SP3 since this laptop is dual boot capable.
I had just installed Ubuntu in my brother's laptop and the drivers for the laptop`s wireless card got deleted, or that's what is leading me to believe. Prior to the installation, the laptop was picking up wireless signals just fine. I tried finding the drivers on the INTERNET but there are too many and I don't want to get the wrong one. Even so, I don't know how to install it through Ubuntu or anything. I tried the "disswrapping" app. but it was looking for some sort of ".if" file type. I also tried using the Terminal, but I'm not an expert on this kind of stuff. I got Ubuntu 2 days ago on my own laptop.
View 1 Replies View RelatedI was thinking of creating an extremely minimal version of Xubuntu using XFCE. I have a Dell Mini 9, a netbook that uses a wireless-g card requiring bcmwl-kernel-source to work.What I would like to do is use either the alternate CD or mini.iso minimal install file to perform a command line install-style installation of the system.So far, what I am thinking (from reading this [url].... article:
HTML Code:
http:[url].....is to start off with these packages to begin with:
xorg
slim (if possible with 9.10, unsure if it is still available. in short, i want to use a lightweight display manager)
xfce4
xfce4-goodies
xubuntu-default-settings
bcmwl-kernel-source
aptitude
My opening questions are: Should I go with mini.iso or the Xubuntu Alternate Install CD (or the Ubuntu one)? If so, which one? What additional packages will I need to make the hardware accessible and fully functional? All I can think of so far would be sound (I'd like to stay away from PulseAudio if possible, it wreaks havoc with my computer), my webcam, and the memory card slot, if additional packages are needed for it?What other "core" packages should I include in this list? Should I include Synaptic, or other packages, and why?What do I need to take into consideration, since this is both a directly- and battery-powered computer?
HTML Code:
http://ubuntuforums.org/showthread.php?t=1155961
post regarding a "Ubuntu-Desktop-Minimal"-type system.
I have a Dell Inspiron 1545 running Windows 7 64-bit. It has a Dell 1397 Wireless card with Broadcom BCM 4312 hardware. This is proven by running lspci in Terminal. I downloaded Ubuntu 9.10 64-bit and burned a disc of it. I used System>Administration>USB Startup Disc Creator to make a Live USB from a 4GB flash drive. I plugged it in and my computer booted into Ubuntu with no trouble. The only problem is that I can't connect to my wireless network. The problem is that no matter how I install the Broadcom STA driver, it just says that the driver is activated but not actively in use. I've used Synaptic Package Manager, Jockey, and even Terminal. I've tried running
Code: sudo modprobe wl
in Terminal, but nothing seems to happen. In Ubuntu, my computer acts as though it has no wireless card, but the wired connection is fine (except for the inconvenience of connecting with a cable). In Windows 7, the wireless connection is fine.
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
01:02.0 VGA compatible controller: Nvidia Corporation NV34 [GeForce FX 5500] (rev a1)
00:02.0 VGA compatible controller: Intel Corporation 8286G Integrated Graphics Controller (rev 02)
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
I have a Dell WLAN 1397 Half Minicard, 802.11 b/g card in my laptop, and I can't seem to get ubuntu to work with it. I tried this method:
1. Synaptic Pack Manager
2. Check "Install from Boot Disc"
3. Reload
4. Install and apply bcmwl-kernel-source
5. Reboot
This didn't work for me, so I tried entering sudo apt-get install bcmwl-kernel-source and that also didn't work. Another thing I tried is formatting my Ubuntu partition and reinstalling, and retrying both of those methods. The ethernet port does work, however.
Something about my sound setup does not agree with Linux. I couldn't get sound on Puppy Linux and I can't get sound with Ubuntu either. I'm trying to use speakers through the headphone jack at the front of the tower (system unit, whatever you call the thing that houses the motherboard/ CD Drive etc.)
I tried the basic sound troubleshooting from this guide: [URL]..Since I still have the links up from it, I might as well share them with you. 1. This is the ALSA Information Script tailored to my settings: [URL]..
2. This is the ALSA Driver Configuration Guide. Scroll down to Line 587 for my card ( Module snd-ens1371):[URL]..
3. This is just some general Hardware info:
[Code]...
