so I would like to upgrade from Jaunty to the newest version. Do I have to do the whole burning of the ISO file unto a cd again? Or mount it from within? Is there a download command to just get the upgrade?
View 6 RepliesRecovery mode doesn't work, same problem. Taking the older kernel gives no problem. I have no 3rd party graphics driver installed. 10.04 was a fresh install on this machine. I cannot get a commandline, the screen just shuts down because of a lack of input.
View 5 Replies View RelatedI'm looking to remove my current version of Java and upgrade to the newest versions of Java and hopefully any other components like flash etc.
View 5 Replies View RelatedI wanna use firefox for working with codes add-on, but when I run "yum install firefox", there is just Firefox version 3.5.0 beta 4 while the newset version at this time is 3.5.5, so I try to install the newest version of firefox browser.
View 9 Replies View RelatedI have an old computer currently running release 7.10, Gutsy. Can I upgrade to 10.04 without burning a CD?
If I must burn a CD, is there a version that will fit on a 700MB CD? Those are the only ones I have here.
I just updated my Debian testing as usual (apt-get update && apt-get dist-upgrade), and it totally screwed up Nvidia drivers. I had to revert to integrated graphic card to start Xorg.
After that, I noticed that libgl1-nvidia-glx is missing, and when I tried to install it back, it produces the following:
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libgl1-nvidia-glx : Depends: libgl1-nvidia-alternatives but it is not going to be installed
E: Broken packages
Any ideas what's going on with it?
I want to upgrade from Fedora Core 5 to Fedora 11 without burning a CD. I have a 1.5 Mbps Internet connection. Is this possible?
View 6 Replies View RelatedI am running Ubuntu 8.04 (installed by CD) and an .iso file for Ubuntu 10.04. Normally, we can upgrade system via internet. But it always takes much time to get it, with me it's around 2 hours @_@. What I need is saving time by upgrade the system from what I have (iso file), not via internet.
View 10 Replies View Relatedi tried to install fce ultra. i downloaded the source from the site, and followed instructions. Everything seems to have gone well but, when i try to run it, i get a pop up saying
Quote:
gfceux ERROR Code 4:
Could not find the fceux binary.
Ensure that fceux is installed and in the $PATH.
I have the version 9.04
how can i download the newest version?
I have been running Ubuntu 9.10 ever since it was released, on my HTPC. However, for some reason when a new kernel comes out and I upgrade to it GRUB 2 doesn't load the newest kernel but just loads the old original kernel that came with it when I originally installed 9.10. I have confirmed that the newer kernels are installed by editing the GRUB 2 command line at startup (just a temporary fix) and all worked well with the newer kernels. How can I make GRUB 2 load the newest kernel by default. On my laptop running 9.10 it has loaded the newest kernel by default ever since I installed it but my HTPC just won't cooperate.
View 3 Replies View RelatedAre there plans to put the newest OpenOffice 3.2.1 into the repositories; plans to update it automatically?
View 9 Replies View RelatedThe most recent upgrade for transmission has broken the package.I think it is a dependancy error between transmission-cli and transmission-gtk requiring a different version of transmission-common than what's available.I have Kubuntu 8.04. Here's my output:
$ apt-get install transmission
Reading package lists... Done
Building dependency tree
[code]....
i was just wondering what is the newest kubuntu netbook remix out
View 4 Replies View RelatedAnyone know where i can download the newest packet tracer for ubuntu?
View 9 Replies View RelatedI had done the upgrade from 10.04 to 10.10 online and couldn't boot to newest kernel and had to select the previous one in GRUB. From what I have read it may be because of NVIDIA drivers or some conflict. Anyways,I did a fresh install of 10.10 from the Live CD overriding my 10.04-to-10.10-online-updated partition so I do not have an option to boot older Linux kernels now. I was wondering if the Live CD could be used to install any previous linux kernels for the new installed Ubuntu 10.10 system.
View 8 Replies View RelatedWill Steam work with the newest version with Ubuntu 11.04?
View 1 Replies View RelatedI tried to delete Ubuntu (the newest version, the only one OS on my PC) and install XP after that. I booted from USB and deleted one partition that contained Linux (formated it to ntfs) files using gparted. When I wanted to boot from Windows installation CD, i got the following message:Unknown file system:Grub rescue> I dont know how to proced with installation of XP, it seems it can not boot from my CD.
View 9 Replies View RelatedI am running 9.04 and would like to get the newest version of Songbird. I don't want to upgrade just yet it that is needed so are there are other ways of doing so? If no one knows how to find .deb packages could they let me know how i could install the .tar.gz format offered on the website?
View 9 Replies View RelatedOk so i've got a main sound card which is include in my motherboard but it dosn't working(Intel Corporation 82801G)And I've got second sound card which working(C-Media Electronics Inc CM873, but ubuntu detect only first card (Intel) and try use it.Earlier i used alsaconf to set main soundcard but in the newest alsasound version there gone.So i just dont have a sound.I don't know why but sometimes when i turn on my computer sound is it.But after restart there gone.I've got Ubuntu 9.04
View 1 Replies View RelatedI'm running Ubuntu 9.10 Karmic Koala, and the latest kernel upgrade (xxxx.22) won't start the system because it can't find the hard disks. It ends up with a prompt from (initramfs).The computer has an MSI board with Intel P4 Dual CPU, and a Phoenix Award BIOS marked W7037 IMS V1.2, dated 091604 (Sep16/04). I doubt that a newer BIOS that will fix the problem, but if anyone knows I could try to find a floppy drive and a diskette, because they require that to install the newer BIOS (ver 1.3). Does any one have a better method? Is it still possible to get the previous kernel version until they fix this bug (if they ever will)?
Is there a way to change the boot sequence in GRUB2 so the original kernel would be the default even if the rest of the software has been updated? Since 10.04 has several bugs and annoyances, may be it's time to change to another distribution (I've tried Mint 9, but it has much of the same, like having to enter the password if I take a short break from the computer). Many questions at once, but less and less things are functioning with each new revision. For instance to use the scanner I must go back to 8.04, or use WINDOWS! (The scanner is the only reason why I have Windows on the computer).
I just recently recieved a Mini CQ10-525DX with a Broadcom 4313 wlan card. when loading ubuntu i notice it says that it supports 4311 4312, so i looked on the broadcom website and they have a newer update with 4313 coverage. I downloaded it but do not know how to install it.
View 9 Replies View Relatedthis is a new problem with issues that started when I upgraded to 10.10. Originally, GRUB wouldn't load after that upgrade, but that was fixed here. Once GRUB was working properly, there was a problem with the 2.6.35-28 generic kernel. When I tried to boot through it, I would only get an ubuntu command line.
Luckily the older 2.6.32-22 generic kernel worked just fine and I could log in and load my ubuntu desktop with no issues. I decided to upgrade to 11.04 to see if that would correct whatever was going on. The installation was completed without any apparent issues, GRUB works, XP Pro works, and the older 2.6.32-22 generic kernel allows me to boot into 11.04.
Unfortunately, another new kernel, 2.6.38-8 generic, is not working properly. I snaped some pictures of what happens when I try to use this kernel:
[URL]
The first is GRUB/ The selection The second is the loading graphic The third is a command line where it freezes (note: this is not the same command line screen/environment that I was referring to with the 10.10 new kernel)
I want to try out the realtime kernel to get my audio latency down. I have installed the realtime kernel packages according to the Ubuntu Studio preparation documentation here - I have also run sudo update-grubHowever, when I boot up, the realtime kernel option does not show up in grub2. The current kernel I am using is 2.6.31-17, but the only options in grub for it are -386 and -generic.
There is a previous entry of 2.6.31-9-rt which I had attempted to use previously (sometime last year) but if I select it, it doesn't even boot at all.I checked my /boot directory and there is no vmlinuz-2.6.31-17-rt file .... Which I am assuming is why it doesn't show up or add when I run update-grub ... But I am currently at a loss for how to actually get the 2.6.31-17 realtime kernel file and add it to grub2.
How can I install g++ 4.0.2, already have the newest one. but one of my make files says it needs 4.0.2.
View 2 Replies View Relatedhow to get the newest Java Version. My Debian has got Java 1.50.3 as Default. I am running Debian Kernel vers:2.6.26-2-686 on a GA-D510UD Mainboard. I tried to install it with apt-get but it just says that it could not find java. I found a packet at Linux & ebian wiki, but i dont know how to extract it into the root Filesystem /. If i just copy it there Debian tells me thati havent got the permission.
View 3 Replies View RelatedSince about half a year ago I downloaded the 11th version of Fedora from the official web page but when trying to install it (I tried booting from cd) it loads everything all right, I get the fedora loading screen, but when it finishes the loading remains so, I doesnt mark errors or anything, I get the cursor on the black screen, the HDD LED turns off and then it remains just like that, I left it up to 1 full hour and from there nothing happens, also tried the ubuntu 9.04 and it is exactly the same, after loadint everything ok, it reaches a point where the screen goes black with a cursor and the HDD LED goes out , the cursor keeps going and it gets stuck.i readed a few time ago that this happens because my video card (which was integrated in the mb) did not support these versions of linux, then i bought an Nvidia GeForce FX 5200LE 128mb card and same thing happened, a couple of months ago i was using a P4GEMX ASUS motherboard with 760 RAM and HDD 160 gb IDE drive. I gave up and leave it for peace.
Today I use an D865GBF Intel motherboard with 1GB of RAM, same video card Nvidia Geforce FX 5200LE and passes the same thing, also tried to install Windows 7 and reaches the point where it shows the wallpaper just before the installation options but nothing happens and it stays right there .. the pointer disappears, I gets stuck in the wallpaper and yet again...the HDD LED goes out, I am very confused, I changed every piece of the pc, new motherboard, new rams and nothing, the only thing that I am still using of the old pc is the hard drive, also tried another HDD, one of 60gb GHola que tal, very good afternoon to all, is the first time I write in the forum and my problem is this:
Since about half a year ago I ordered a cd of ubuntu 9.04 version when trying to install (if I try booting from cd) load all right, I get the ubuntu loading logo, just finished loading and remains so, I mark errors or anything, I get the cursor on the black screen, the HDD LED turns off and now ... just so he stays, I left it up to 1 full hour and from there nothing happens, also try booting linux from the cd (without making changes to your computer) and it is exactly the same, try also with Fedora 11 and it is exactly the it reaches a point where the screen goes black with a cursor and the LED goes out there hard drive, the cursor keeps going and is just lei long that this was because my video card (which was built in) did not support these versions of linux, then buy a Nvidia GeForce FX 5200LE card and same thing happened, was a P4GEMX ASUS motherboard with 760 RAM and disk 160 gb IDE drive. I gave up and leave it for peace.
Today I D865GBF Intel motherboard with 1GB of RAM, same video card Nvidia Geforce FX 5200LE and passes the same thing, also try to install Windows 7 and reaches the point where it makes the wallpaper to give after the installation options and stay there .. falls short of options, the pointer disappears, I stay in the wallpaper and for varying the harddisk LED goes out, I am very surprised and totally changing equipment, new motherboard, new ram and nothing, the only thing that I am using the above pc the hard drive, also try another 60gb hard drive and same thing happens, it will be??? perhaps I need a SATA hard disk??
I'm trying to keep a directory full of log files manageable. Nightly, I want to delete all but the 10 most recent. How can I do this in a single command?
View 2 Replies View RelatedI have two directories, dirA whicht contains N gb of data and dirB which is supposed to contain only the newest M gb of data from dirA. When files are added to dirA, they sould also be added to dirB, while the oldest files in dirB should be deleted.Is that possible with rsync? or any other software?
View 1 Replies View RelatedI am traying to install VLC on RHEL 5.5 I have installed the rpmforge repos rpms.I get this error message everytime:
vlc-0.9.9a-7.el5.rf.x86_64 from rpmforge has depsolving problems
--> Missing Dependency: libdvdread.so.3()(64bit) is needed by package vlc-0.9.9a-7.el5.rf.x86_64 (rpmforge)
[code]....