Ubuntu :: Uninstall Driver From Live CD To Fix 100% Broken System ?
May 30, 2011
I just installed a new driver from the Realtek site for my wireless chip, and it broke my system. Ubuntu won't boot in normal mode or recovery mode, and I'm sincerely hoping beyond all hope that I can avoid reinstalling the system I just got working yesterday.
At my connection speed, it will take about two days to download all of the packages I use. Is there any way to get rid of this driver and restore my system back to how it was... about twenty minutes before I posted this, without booting in the system?
I am running Ubuntu 10.04 In Ubuntu Software Center I tried to remove Document Viewer. I then tried to install PDF Editor Neither worked and I got the below message The Package system is broken Check if you are using third party repositories. If so disable them, since they are a common source of problems. Furthermore run the following command in a Terminal: apt-get install -f� I tried to run apt-get install -f and got this message
david@leibnitz:~$ apt-get install -f E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root? david@leibnitz:~$
I switched to root and got this
david@leibnitz:~$ apt-get install -f E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root? david@leibnitz:~$ root
[code].....
At some point while trying install/uninstall I got a message that said to check the broken filter to see which file is broken. At present, I cannot install/uninstall programs. I do not know how to access the broken filter. And I cannot run apt-get install -f
How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
I had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.
Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.
I used these steps to switch from nvidia to nouveau: NvidiaDriverSwitching
I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.
jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.
I tried installing nvidia-current via apt-get and I get these errors:
Code: Setting up nvidia-current (260.19.06-0ubuntu1) ... Removing old nvidia-current-260.19.06 DKMS files... dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified. dkms.conf: Error! No 'PACKAGE_NAME' directive specified. dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
How can I either fix or uninstall a broken Firefox 3.6.9 install. The install gets all the way through until it syops at "setting up firefox: Setting up firefox (3.6.9~hg20100817r34537+nobinonly-0ubuntu1~umd2~lucid) ... then it stops forever and now I can't find or install any updates at all. It tells me to fix by running: sudo dpkg --configure -a and around and around we go!
I would like to know whether an updated print driver has successfully replaced a previously installed driver.
I have a late model Lexmark Prestige Pro805 printer. Lexmark supplies a Linux driver which you download. No drivers appear on the Ubuntu Add Printer list. The Lexmark download also installs utilities, etc. Some stuff appears installed in synaptic. I don't know if uninstalling these only uninstalls the applications and not the actual driver. For some reason, I have had issues recently with this printer malfunctioning frequently with my Linux machines over wifi. They have pushed new firmware down to the printer, and this may be a cause. There is also newer Linux print drivers which I installed, but I do not have a clue as to whether the new drivers are actually in use. On a windows machine I would have uninstalled the printer prior to re-installation. Clueless how to accomplish the same on Ubuntu.
i am Ubuntu rookie i installed the following package onboard (Simple On-screen Keyboard with macros and easy layout creation) when i try to uninstall it using Synaptic Package manger i get the following error.dpkg: parse error, in file '/var/lib/dpkg/status' near line 26430:invalid package name (character `|' not allowed (only letters, digits and characters `-+._'))and when i try to configure it get the same error any help msi@msi-desktop:~$ sudo dpkg --configure -a dpkg: parse error, in file '/var/lib/dpkg/status' near line 26430: invalid package name (character `|' not allowed (only letters, digits and characters `-+._'))using Ubuntu 10.4
I recently installed ndiswrapper and decided to remove it after some kernel panics. The problem is that it overwrote something because I have the compat-wireless-backport driver installed but 'wlan0' doesn't show up anymore. I can see my wireless card when I type 'lsusb'. Any ideas on how to fix?
I'm trying to unstall Ubuntu 10.4 in a hd from a live Cd. The problem that I have is that even though I can reach the menu screen when I select even the options Install or Use without changes the sistem shows the ubuntu logo page with the little dots below changin colors but It won't go any further.
I have developed a simple tool to easily uninstall any Ubuntu (or other Linux distro) from an Ubuntu live-CD.It works very well for any Linux installed on a separate partition.Now I am wondering if it is possible to add it the possibility to uninstall a Wubi installation.For the moment, I know how to detect a Wubi install (just need to detect a /ubuntu/disks/root.disk file).Then, all tutos I found use Windows tools, but this "How do I manually uninstall Wubi?" paragraph gives clues to do it from a live-CD :- Remove C:ubuntu and C:wubildr* : ok- remove Ubuntu from the Windows bootloader : do you know how to do this from a live-CD for Vista and Seven ?- remove Ubuntu from the registry : do you know how to do this from a live-CD
I want to uninstall Grub from my machine. I am currently using Unbuntu 9.04 Jaunty Jackalop 's Live CD. Please help me with these. I can't make use of windows recovery console as right now i don't have any os installed on my machine. Please help!
In the future I plan on switching video card brands and I was wondering if there is a way to delete or edit packages on a hard disk install from a Live CD? Also, will switching brands of video card cause a fedora install to crash upon booting?
I'm new to Ubuntu and I face a problem with my wlan my machine is Amilo li1818 I've installed sis163u vista driver, later I knew I must install sis163u XP driver not vista so, I need a help to fix this wrong.
I installed the proprietary ATI graphics driver from the AMD website(i did not install it using the additional drivers tool in the administration menu) and i don't know how to uninstall it. how do i do this?
The last few weeks I have been dual monitoring from my lcd monitor to my hdtv. LCD was connected via vga and my tv via hdmi. To my knowledge, my pc has two graphic cards, both ATI Radeons. One I believe is on the mother board, ATI Radeon 4200HD series, and the other is in a PCI slot ATI Radeon 5600HD series. I think that when I had it dual monitored the tv was connected via 4200HD and LCD via 5600HD (could be wrong).
What I Did: Everything was working fine (i was mainly just using the HDTV as my only monitor and main monitor). As you can guess I was gaming on the hdtv, but I was not satisfied with the slight lag I felt. So I looked at forums to see what I could do and they mostly said 1) change settings on tv to game mode, 2) turn off vsync on your graphics card. So I did #1, but when I tried to do #2 I could not open my graphics cards "menu" aka CCC aka Catalyst Command Center.
So I read up on why this might happen and they said I should uninstall drivers and reinstall the drivers, so I did this as well (with most current drivers from the AMD site, version 10.9) and still I could not get into the CCC. As I was reading more forums, they were saying the 10.8 version mainly has this problem. So what I did was I downloaded 10.7 (did not install yet) and uninstalled the new 10.9. When I went to reboot the cpu after the uninstall of 10.9 there was no display on my HDTV.
I figured I just need to go back to my LCD which was still hooked up to my cpu. No display there as well. I tried dvi and vga hook ups from the monitor to both graphic cards but nothing worked to get me a display. I also tried my girlfriends monitor, which only has vga, to both graphics card and still nothing worked. So at this point I have NO display. After about an hour of trying different combinations of cords, monitors, plugs, tv's etc.,
I RANDOMLY somehow got a display with my girlfriends monitor vga to the 5600 card (I think). I had to hold the vga cord a certain way on attached to the monitor in order for the display to work. So since I had a display, I quickly installed 10.7. After installation, it did not prompt me to reboot (which I thought was weird) so I just went to properties and tried to change the resolution to the max 1600x something, to see how it looks. The screen went blank and the display never reappeared. Now I basically have NO DISPLAY again.
i downloaded the 11.4 ATI driver from their website. Then, i installed the driver using .RUN file. After installation, my graphics became worst and i cannot enable any effects. i went to system-preference...There were 4 ATI options (2 for the new one, 2 for the older one). i wanted to remove the newly installed 11.4.i went to additional driver and unistall the driver from there. but it uninstalll the older one. The 11.4 is still there in the preference.how to remove this driver i installed from RUN installer?
I have had one headache after another, first the updates break the bootstrap loader, this is a known issue yet they still continue to release grub updates that effect this and break the boot sequence. I am very surprised that this is done. so onto the next issue, they say use a CD to boot from and move the files for grub2 over, well that has been a nightmare taking two days to only find it deleted my initial Linux install, so wasted days, no real back up for the entire system and lost emails etc. The CDs lock up on boot, they do not load from the CDs and the instructions for fix grub are very lacking.
I would have thought a windoz based solution would have been offered so that this was more easy to do. This boot from a Live CD does not work and the CD downloads are not working either (using them to load via windoz again, but have lost months of work AGAIN). If an update is known to break the bootstrap loader, why on earth would you release updates that continuously break it?? Just ranting as support seems lacking....seems like you are on track to performing like windoz well... I am not impressed in the least given I work in the Open Source Community and havve done so for years..
Long ago (Back in the Intrepid Ibex days) I ran a manual upgrade of NVIDIA drivers from NVIDIA's website, in an attempt to get Wine running better on my system. Now every time I run upgrade manager, this message (or something similar) pops up twice every time I run upgrade manager:Code:The system has detected an obsolete NVIDIA driver in your system.Please install nvidia-glx-185 at the end of the installation with the following command:sudo apt-get install nvidia-glx-185The removal of other NVIDIA drivers will be dealt with automatically.I actually have nvidia's 190 drivers installed, so the error message is a bit of a misnomer.This message has been persistent with every upgrade, and appeared many times during the Karmic upgrade.
Now I understand when I did this originally every time I get a kernel upgrade and rebooted I'd need to reinstall NVIDIA's drivers. But ever since my Karmic upgrade, things seem to be a bigger hassle than normal.. The system almost locks up after reboot. Compiz now seems crippled and I've disabled it just to get a decent framerate.What I'd really like to do is go back to Karmic's NVIDIA drivers and not have to deal with update problems anymore.However, when I attempt to reinstall Karmic's NVIDIA drivers, I just can't seem to make this error message go away or get the drivers to work. I end up frustrated an hour later, reinstalling NVIDIA's drivers because something is broken and I just can't get jaunty's drivers working at all.
I've manually installed the latest NVIDIA display drivers from the website (newer than the restricted driver package that came with 9.10). When there is a new Linux kernel, or a newer Ubuntu version, will I need to uninstall that driver before upgrading? Will having this driver cause any special installation issues during upgrade (such as the need to reinstall the driver after upgrading)? I am using 9.10 through Wubi.
I think the problems are connected to the ATI drivers I've installed. I used the ones I got off of the ATI graphics driver repository specifically for OpenSuse. I would like to try the latest drivers off ATI's website again. I understand they are much more recent than the ones in the repository. The first time I tried them they didn't work, though they have worked in the past for me on a previous incarnation of this system. Do I have to uninstall the current drivers first? If so, how do I be certain I have uninstalled all that is necessary since I didn't keep track of the details in the first place? I can find some of them using the search function but perhaps not all. I would imagine there is a way to do that using YaST since I got everything off that one repository.
which option in the ATI graphics driver installer (ati-driver-installer-10-4-x86.x86_6.run) should I use? I'm using 11.2-64 on an Intel based system. Will the 32 bit drivers work on a 64 system? As I noted, the automatic option doesn't work for me. From reading some of the other posts here it seems perhaps I should start in level 3 and use the cli from there. That's not what I did before. Or should I try the latest 11.3 milestone since that seems to have better graphics card support?
My sound card (Soundblaster 24 live! USB) stopped working shortly after upgrading to 10.04. everything was fine until the upgrade as well a immediatly after, so I assume that an update was to blame. If I boot the PC off a live CD, all is well and the sound card works fine.
I've tried running
aplay -l
but it assured me that I do not have a sound card on the system to setup! how I find the broken config file or busted driver?
I use slackware 13.1-current on desktop with 4gb ram, nvidia geforce 210, and AMD cpu. I have problem with my X starting using 40-50 MB of RAM and after some hours suddenly rises up to 400-500 MB. I have tried KDE ( with and without desktop effects ), LXDE, 3 different nvidia drivers ( the one made from the slackbuilds ) but no luck. I decided at last to use the default slackware's driver. I uninstalled the nvidia driver and do startx, but it says code...
I have no idea about GPU and drivers, it was a mistake to install a driver for my nvidia just to have desktop effects. I just want to bring the things back as at the beginning of the systems installation and the default drivers. Do you have any idea how to do it?
I'm trying to compile a correct driver module for my graphics adapter "Nvidia Riva TNT2 M64". I visited the website "http://www.nvidia.com/object/linux_display_archive.html" and I downloaded the file "NVIDIA-Linux-x86-71.86.13-pkg1.run".to start installation I used the following commands:/sbin/init 3 --> to close the X rversh ~/NVIDIA-Linux-x86-71.86.13-pkg1.run
My laptop runs really hot and after reading a few threads around the forum I came across one that said it was because of the fact that ubuntu comes with an open source driver.All you have to do is update to the proprietary driver and everything is fixed. So I went to the menu and looked for the driver. I honestly didn't check if the one that was found was compatible with my graphics card, I just assumed that the one that it found was the right one. I installed it and restarted and ubuntu wouldn't load. It goes through the initial load but when it comes time to bring up the login page, it stays black and never advances. I assumed that this was a result of an incorrect driver. Again, I turned to the forums and found that other people had this problem. So I grabbed my trusty live CD and tried to load up a live session and remove the config file that points to the driverThe live CD wouldn't load. Same thing for recovery mode. It gets to a certain point and stops. This link is an image to where the boot stops:
Syslog says during boot up that the "pulseaudio[1598]: alsa-mixer.c: Your kernel driver is broken: it reports a volume range from 6.00 dB to 6.00 dB which makes no sense."
Code: root@server:/var/log# uname -r 2.6.31-20-generic /var/log/syslog.1 Apr 2 21:41:28 server kernel: [18.905889] Linux video capture interface: v2.00 Apr 2 21:41:28 server kernel: [18.938819] usbcore: registered new interface driver snd-usb-audio Apr 2 21:41:28 server kernel: [19.157052] parport_pc 00:06: reported by Plug and Play ACPI Apr 2 21:41:28 server kernel: [19.157182] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] .....
