I recently installed ndiswrapper and decided to remove it after some kernel panics. The problem is that it overwrote something because I have the compat-wireless-backport driver installed but 'wlan0' doesn't show up anymore. I can see my wireless card when I type 'lsusb'. Any ideas on how to fix?
View 6 RepliesI have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
I'm trying my to get my 3-year-old Dynex wireless dongle to work in Ubuntu 10.04 (64-bit). Borrowing a similar linksys adapter from another computer running Ubuntu, I was able to install NDISGTK and transfer the same drivers that work in my 64-bit Windows 7 installation into my home folder.
Despite the fact that the dongle does not appear at all using lshw -C Network, ndiswrapper -l indicates that the driver is installed and the device is present. I think I found something interesting, though, when I tried this command:
Code:
jimmy@ubuntu:~$ dmesg | grep -e ndis -e wlan
[ 9.321323] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 10.021542] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists'
[ 10.021549] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem'
[ 10.021554] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem'
[Code]...
I just got a new pc and installed ubuntu 10.04. I have not yet been able to connect wirelessly, but can connect using a hardwire connection.
Code:
kyle@Gracie-pants:~$ ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
[code]...
I just installed Ubuntu 10.04 64 bit on my mac as a seperate OS, but I can't get my Internet working. It's wireless and Ubuntu isn't seeing any of the wireless networks in the area. I have installed ndiswrapper and tried installing a driver for my network but it didn't work.t=616801 but when typed in this code: "ndiswrapper -i bcmwl5.inf && modprobe ndiswrapper" I got the "No such file or directory at usr sbin ndiswrapper line 219" error
View 2 Replies View RelatedSince I upgraded to Lucid, I am dealing with serious instabilities related to my wireless card. What happens is that when there is a lot of wireless activity the computer freezes. It is a complete freeze, the mouse stops moving, if something was coming out of the speakers it keeps echoing, and the only solution is to turn off the computer. The bug seems to coincide with the one listed in here
[URL]
My wireless card is Intersil ISL3890/ISL3886. My whole computer is an HP z555. I'm thinking that is should be a bug in the wireless adapter driver, which is p54pci. The only solution I can think of is to blacklist it and set up ndiswrapper. I am not very comfortable with this solution since a native linux driver should be better than ndiswrapper.
Before I start off, I must say that I know NOTHING about Ubuntu. I only know how to run .deb files. So I installed my wireless driver via the graphical ndiswrapper (FYI my wireless adapter is a Proxim 8424-WD). It then said "Unable to see if hardware is present". After I exited out of that message, it said "Hardware:Present" (or something of that sort) next to the newly installed driver. I tried searching for wireless networks and found none. I'm guessing something didn't work right. I used this command "lshw -C network" and got the following result.
[Code]...
I updated the Kernel to 2.6.34.4-0.1-desktop. First problem was in order to do that I had to uninstall ndiswrapper. Now I have multiple entries in the bootloader, the default, the desktop, and the openSUSE 11.3 -2.6.34-12. Since I am new to linux what am I suppose to do with all those entries?
View 9 Replies View RelatedI've been using a RealTek 8190 PCI wireless card on my desktop in Ubuntu 10.04. The net819xp driver worked fine in ndiswrapper. Then my housemates got a new router and switched our wireless SSID & password. In network manager, I can see the SSIDs, but when I try to connect to our SSID, it continues trying to connect but never does connect. Something related to the router change and router firmware upgrade created this problem and i'm sure i need to fix it on my computer. All my windows7 flatmates are connecting with no problem. Right now I'm using my laptop, so i can't copy & paste results from terminal commands,
View 1 Replies View Relatedi've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.
View 1 Replies View Relatedsometime back when installing FC10, i tried installing ndis wrapper, and later i installed the broadcom driver bcm431 (i think). also i didn't remove the ndis wrapper.
all was fine untill a yesterday when ndis wrapper and some related packages got updated which somehow caused wireless to stop working. lspci showed the hardware present.
to get it to work, i did a yum erase ndis-wrapper, followed by a reboot.
it may not be the most elegent way, but it worked for me.
hardware specs:acer aspire 4720Z (mine has broadcom wireless, others may have atheros)
I've search for info on configuring ndiswrapper for the BCM4318 Wireless card. All I've been able to find is information on Ubuntu and Debian, which don't seem to use the same methods for configuration. Has anyone configured ndiswrapper for this or any wireless card on CentOS 5? I've installed 5.4.
View 7 Replies View Relatedhow to use the Sitecom WL-324 usb stick with ubuntu (10.10)? (It works with windows.)
lsusb | grep Ralink
Code:
Bus 002 Device 004: ID 148f:2878 Ralink Technology, Corp.Im using Ubuntu 10.10 x64 with a Phenom(tm) II X6 System My results so far:
sudo modprobe rt2870sta (or rt2800usb)
result (rt2870sta) :
lsmod | grep rt28
Code:
rt2870sta 445182 0
crc_ccitt 1699 1 rt2870sta
dmesg
[code]....
I've been having a network problem that I've been able to temporarily solve by rebooting the router, but even that can be shaky at times, and it can sometimes disturb others' internet activites, so I'd really like to tackle this while I can. I had an old thread about this, but it's ancient history by now, and plus which, I've got a bit more Linux experience and patience than I did before.
The basic problem is that NetworkManager will associate and connect to my home wireless network, but a) it won't let me ping the router or anywhere else ("Destination Host Unreachable"), and b) the connection lasts for maybe a couple minutes at most. If I reset the router, however, 9 times out of 10 it will associate and connect successfully and I can get online, but I have to run a constant ping to the router with a 10-second interval, otherwise it drops the connection, unless I'm doing a lot of other heavy network activity.
ping 192.168.1.1 (the router):
Code:
I've tried wpa_supplicant, but this is what I get (it's apparently unsuccessful...? ESSID/MAC addresses censored where necessary):
Code:
The last prompt line is included because I cancelled it myself; it didn't abort on its own. If left unmonitored, it basically keeps doing this over and over, with no visible network activity at all.
With NetworkManager, I can keep selecting the network's ESSID over and over, and it seems to reconnect, but I still can't ping out anywhere. I'm using a Netgear WN111v1 wireless adapter with ndiswrapper and the Windows drivers. I have no idea what the chipset is, and I doubt that Linux drivers exist for it, even if I knew what it was. The router is using WPA2 security (hence my trying wpa_supplicant)
lsusb:
Code:
ifconfig wlan0 (while connected; IP/MAC addresses censored where needed):
Code:
ifconfig wlan0 (while not connected; IP/MAC addresses censored where needed):
Code:
Code:
I only include this for format checking purposes. The commented out "psk" is the actual text passphrase, while the uncommented one is (presumably) a hex representation of the same key. Is this correct? I've never done this with wpa_supplicant before, I've only used NetworkManager (which is a pain in the @$$ because it requires X to run, and so it disconnects any time I log out/back in ).
Is there any hope of getting my wireless connection permanently working, so that I don't have to reset the router every time I need to reboot or log out/back in?
I recently switched from Windows XP to a clean install Ubuntu Karmic Koala 9.10 but it seems to be quite a problem to get the wifi up and running. In Windows the nearby network all appeared in network connections but the same section in Ubuntu is empty. So I decided to go with the ndiswrapper guide to solve the problem with an unclaimed driver. After an entire day messing with my computer I'm still not close... Below follows excerpts taken from the Ndiswrapper guide with posted results from my computer. "ndiswrapper won't work until it thinks that your Windows drivers have been properly installed and that they are the appropriate ones for your wireless card. You can run the command: ndiswrapper -l"
result:
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
net5211 : driver installed
device (168C:0013) present (alternate driver: ath5k)
So I've posted the result the name of my wireless card below: lspci -nn
Result:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:0259]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:1259]
[code]...
It seems like the network is disabled or unclaimed or both. What to do? I'm stuck after spending an entire day trying to install the wifi. I had no problems in Windows XP but it seems to be quite impossible in Ubuntu.
I want to know how to uninstall the bcm4312 wireless driver from my ubuntu 10,04.
View 1 Replies View RelatedI have a fresh install of 11.04. I am trying to install the "additional drivers" Broadcom STA wireless on my dell laptop. The drivers worked correctly pre-install on the boot up test run, but now they won't activate or uninstall.
On activation attempt, it says : installation of this driver failed. Please have a look at the log.
The log reads: Quote:
2011-05-03 11:49:06,603 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2011-05-03 11:49:06,637 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2011-05-03 11:49:06,679 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[Code]...
How can I either fix or uninstall a broken Firefox 3.6.9 install. The install gets all the way through until it syops at "setting up firefox: Setting up firefox (3.6.9~hg20100817r34537+nobinonly-0ubuntu1~umd2~lucid) ... then it stops forever and now I can't find or install any updates at all. It tells me to fix by running: sudo dpkg --configure -a and around and around we go!
View 5 Replies View RelatedI have a thinkpad using the iwl3945 driver (Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks).
This worked flawless until I upgraded to 10.04. Now after a while my connection drops. Syslog is appended.
May 10 20:16:04 gimli NetworkManager: <info> Activation (wlan0) starting connection 'Auto my-network'
May 10 20:16:04 gimli NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
[Code].....
According to a help page (Wireless Network Card Installation - openSUSE) I need to use ndiswrapper to install the windows driver for my wireless. However it appears the command 'ndiswrapper' was not installed with the operating system. How can I obtain the package for ndiswrapper and install it? Not being connected to the wifi makes this step tricky
View 1 Replies View RelatedI recently upgraded to OpenSUSE 11.4 GNOME on my ancient Compaq Armada E500 (Pentium II processor w/512MB of RAM) and now I'm trying to install my wireless driver with ndiswrapper. I've done this a couple of times before, but I'm having trouble getting ndiswrapper to find my driver. The driver is located in a folder on my desktop, but when I type the command 'ndiswrapper -i home/edwin/Desktop/WPC54G_40826/LSTINDS.INF' I get a message that there is no such file or directory at ndiswrapper's location, which is usr/sbin/ndiswrapper. So how do I get ndiswrapper either to look in the directory where the file is located or get a copy of LSTINDS.INF into the usr/sbin/ directory, which must be accessed as root?
View 9 Replies View Relatedi am Ubuntu rookie i installed the following package onboard (Simple On-screen Keyboard with macros and easy layout creation) when i try to uninstall it using Synaptic Package manger i get the following error.dpkg: parse error, in file '/var/lib/dpkg/status' near line 26430:invalid package name (character `|' not allowed (only letters, digits and characters `-+._'))and when i try to configure it get the same error any help msi@msi-desktop:~$ sudo dpkg --configure -a dpkg: parse error, in file '/var/lib/dpkg/status' near line 26430: invalid package name (character `|' not allowed (only letters, digits and characters `-+._'))using Ubuntu 10.4
View 1 Replies View RelatedI just installed a new driver from the Realtek site for my wireless chip, and it broke my system. Ubuntu won't boot in normal mode or recovery mode, and I'm sincerely hoping beyond all hope that I can avoid reinstalling the system I just got working yesterday.
At my connection speed, it will take about two days to download all of the packages I use. Is there any way to get rid of this driver and restore my system back to how it was... about twenty minutes before I posted this, without booting in the system?
I recently upgraded Ubuntu 9.10 to 10.04 and my wireless stopped working. It can detect that there are networks around, what their signal strength is, and then try to connect to one, but it just keeps connecting. After around 5 minutes, this stops and nm-applet says no network connection.
After I try to connect, dmesg is spammed with hundreds of the same message. I can not post these here, as I am writing from a different computer and I have no internet access from my main computer.Also, there is nothing in interfaces.conf other than lo. For some reason, my card is referred to as both wlan0 and wmaster0, with this changing depending upon where I look.Most interesting of all is that, even after I reinstalled 9.10, wireless is still broken, even though it wasn't before. It also used to work under liveCD.
I'm not sure if I have two seperate issues or one inter-related issue. The Network Manager applet wasn't appearing in the tray, found out it wasn't installed. Installed, still didn't appear. Tried installing WiCd, WiCd did appear but couldn't find any networks. I had installed restricted drivers previous, decided it was worth another look. Found that Broadcom STA Wireless Driver wasn't installed. Tried to install, it said it couldn't and said I should review the var/log/jockey which is....excessively long.
View 2 Replies View RelatedI just upgraded the kernel on my Ubuntu laptop from 2.6.32-24-generic to 2.6.32-25-generic (using the update manager under gnome). After the update, the wireless network controller shows up as UNCLAIMED when I do lshw -C network.When I try to install the driver with the commands sudo modprobe lib80211 sudo insmod wl.ko
i get this error message: insmod: error inserting 'wl.ko': -1 Invalid module format
I have compiled the driver using the 2.6.32-24 kernel. Do I have to re-compile with the new kernel?I'm a unix user, but not a kernel hacker, so I'm wondering if I will run into problems every time I get a kernel update? Or is this problem an exception?
for over at week i have been trying to get my wireless card to work now. If i open Additional drivers, the non proprietary driver seems to be working and active. If i deactivate that and use the STA driver instead, it says active, but currently not in use. When i use the non proprietary driver, i can check mark on 'activate wireless', but nothing happens. When i use the STA driver there are no wireless options. I'm not sure if its important, but when i do "sudo lshw -C network" when the STA driver is active but not in use, the network status changes from 'disabled' to 'unclaimed'. When i came here, i tried to install "firmware-b43-lpphy-installer" as the sticky said i should, but the installation fails. It says my card is not supported: "Not supported card here (PCI id 14e4:4727)!"
[Code]...
Is it any way of activating my wireless without using the external switch of laptop (currently broken)?
If yes how can I memorize this action so that each time I boot it will be automatically open?
I am using Ubuntu 10.10. In previous versions wireless was always activated.
I just rebooted my netbook after updates this last week and notices the wireless is broken now. The updates updated my kernel and wl modules. I'm using a broadcom 43224 driver.If i reboot to the older kernel the wireless works.
View 5 Replies View RelatedI have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted