Why do i have trouble opening my dvd drive When there is no disk in it is there a setting i have wrong or is it my dvd is packing up it plays well and copies every thing i put at it, opens when i have disk in it but not when no disk in.
View 9 Replies
OS: Debian unstable 32bit, kernel 2.6.32-2, grub 1.98 from late january 2010 (only have working net-access from work now, so I am grabbing information from memory). EXT3 and EXT4 support is compiled into the kernel along with chipset/scsi/sata support (not as modules), and I have tested to boot ext3 with it before proceeding. Prereq: my old disk started to have too much S.M.A.R.T errors, so I bought another one, put in a USB cabinet, added swap and ext4 partition/filesystem to it, and copied over all data from the old system to the new that was mounted at /dest using the command "find ./ -xdev -print0 | cpio -paV0 /dest". Swiched disks, so I now have the ext4 disk sitting at /dev/sda (partitions: sda1 => ext4, sda2 => swap), and booted into rescue-mode from cdrom, using /dev/sda1 as root with a shell on. After doing this, I performed the following commands:
mount --bind /dev /dest/dev
chroot /dest
modified the /etc/default/grub to instruct the kernel to boot using ext4, ran grub-install --recheck /dev/sda
ran update-grub to modify /boot/grub/grub.cfg (which looks as it should) After doing this, grub finds my partition and mounts it. It however stalls with the message: "warning: unable to open an initial console" and does nothing after this point. I have no ramdisk, but my old kernel booted fine from ext3 (and still does if I copy it to a ext3 partition), and since the ext4 support is compiled into the kernel - should I really need a ramdisk?
I want to do partitioning with "cfdisk" in a virtual machine name is VMware that has Ubuntu, is for a project of LFS so when I try to call the "cfdisk" and an error flag:
"FATAL ERROR: Cannot open disk drive Press any key to exit cfdisk"
"Press any key to exit cfdisk"
Then try "fdisk" and I get nothing of what I need. Then with "sudo cfdisk" and I went another different error:
"FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder"
"Press any key to exit cfdisk"
i have xp and ubuntu 9.10 dual boot. format and install xp again, before that i copied all my desktop xp files to my drive f: using ubuntu but drive if is "compress drive to save disk space" threw xp, so when i reinstalled xp every time i click on drive f: this message comes up "this file does not have a program associated with it for performing this action. create an association in the Folder Options control panel", if i enter f: in the address bar it will access f:, but is there a solution for this i mean i am going to be coping files from ubuntu to xp all the time i don't want to mess up another drive.
View 4 Replies View Related I can put a CD or DVD in the drive, mount it, read it & unmount it. But I cannot take the disk out of the drive once it has been place in the drive without
1) Physically holding the CD draw open
2) Shutting down SUSE.
As soon as the drive starts to eject the disk, the draw is forced closed again. This happens if the eject button is pressed, or the sudo eject command is issued. For some reason, the draw is being instructed to close again almost immediately after it opens. I've managed to extract disks by grabbing the draw when it starts to open, but I'm afraid I will damage the drive this way.I do not think this is a hardware issue, as other OSs run on this system do not seem to have this problem.
i usually use my pendrive in windows vista but when today i tried to open it in ubuntu 9.10 it does not show up. i know that it is mounted because i could see it in the "USB START UP DISC CREATOR" (IN SYSTEM->ADMINISTRATION->USB START UP DISC CREATOR) [See the screen shot. ]. i think since i had never tried to open my Pen drive in ubuntu before and always open it in win vista, that's why this problem is coming up.
View 9 Replies View RelatedJust installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
[Code]...
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
error message:Unable to scan Floppy Drive for media changes Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
View 1 Replies View RelatedI downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies View Relatedi've been using xubuntu for a few days now and i am encountering this irritating problem! i am able to connect other thumb drives and other flash drives to my laptop and they run fine on xubuntu but when i try to connect my 80 gigs external hard drive, it displays the following error message and shows nothing but an empty window of the hard drive with no contents of it :
ERROR:
"Failed to open directory "This IS RJ's". Error stating file '/media/This IS RJ's/xubuntu-11.04-desktop-i386.iso': Input/output error."
where "this is RJ's" is my hard drives label and the "xubuntu-11.04-desktop-i386.iso" is a file i believe inside the drive. ( is it causing the problem?) this external hard disk is working fine on windows xp. but what is the problem on xubuntu?
As of this morning I cannot open pdf's by clicking on them in firefox. I can download them and open them from the download window or even from the folder they are saved to, but not from the browser. Evince opens and says: Unable to open document Error opening file: No such file or directory.
View 1 Replies View RelatedEvince in non-gnome systems is unable to open external link. The error msg it shows is
Code:
Unable to open external link The specified location is not supported. I have already googled it, however it only says it is a bug, without any solution available. Evince in gnome systems however work just fine. Is there any way evince can use sensible-browser to open external links?
when I click on any folder under places. for example if I click on my home folder or video folder. Or any folder under places. I get a document viewer message in Red. Saying "Unable to open document" "cant open directory" how I can fix this?? im on 11.04
View 2 Replies View RelatedI'm trying to install The Sims 2 (which I'm aware currently does not run properly in wine anyway), using the multi-CD version. The installation goes normally, up until it comes time to switch from disc 1 to disc 2. The installer prompts me to insert disc 2, but it seems that Ubuntu still believes that the installer doesn't want me to open the drive, because, when I try to open it, it doesn't open, and a window pops up with the following message: Unable to eject CD-RW/DVD RW Drive DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
View 3 Replies View RelatedI just installed opensuse 11.2 and was invented with a issue where usb was not detected by the OS.
i tried lsusb no details were display
So I have seen several super boot disks based on winpe(Like Bartpe super boot disk) out there and I am wondering if anyone can happen to point me to one that is based off open source software.
Super Boot Disk = A single boot disk that accomplishes a great many common tasks needed to rescue a system.some things that I am looking for in this would be: Virus scan, memory test, bootloader recovery, hard disk drive recovery/testing, gparted, clonzilla.and whatever else you could think of.I see that gparted and clonzilla both have live cd's available..but im looking to only carry one disk.
I am running the latest suse release downloaded directly from their website. I ran the installation after buring the dvd and everything seemed to be working fine. after the installation i ran updates and used it for a little bit. When i shut it down that night and went to restart it I got an error that stated the OS wasnt there. I then went through the installation and everything and it retained the information from the installation before (web history etc.) but for some reason every time I reboot or shut it down the system is not able to read the startup information from the hard drive and will not come on without me re installing it.
View 9 Replies View RelatedThe following message comes up when I boot up: Logging in user Warning: Cannot open ConsoleKit session: Unable to open session: Launch helper exited with unknown return code 0. When I press OK, the system completes the start up and everything looks normal. But when I try to connect to internet, I get the following message:
KNetworkManager cannot start because the installation is misconfigured. System DBUS policy does not allow it to provide user settings; contact your system administrator or distribution. KNetworkManager will not start automatically in future. If I reboot the system, I logg in successfully. So far the problem has appeared approximately upon every second time I boot up. Rebooting the system seems to take care of it.
Don't know what info is of interest. I'm using
Opensuse 11.2
KDE 4.4.2 (Factory)
After upgrade from 4.4.1 to 4.4.2 it worked fine for a week or so.
I do a clean install of slackware64 13.1 beta1 with KDE and switch default runlevel to 4 in /etc/inittab.
I try to login in kdm, I always come back to the login....
I try this with default runlevel 3 and an .xinitrc with "ck-launch-session startkde" .. works without problems, so I switch back to default runlevel 4, now i can login and only get the error "Cannot open ConsoleKit session: Unable to open session..."
Here are some logs
syslog
Code:
Code:
I tried to access files from my old hard drive that used to be in a Mac (which unfortunately isn't working anymore). I connected it to my computer which I am running debian gnome on. So my question is how do i access a mac os extended disk image. The disk is encrypted and when i try to open it it says that i don't have permission. I think its encrypted in AES 128 bit.
View 4 Replies View RelatedI'm getting error from KVM when i try to create new machine. I have install group Virtualization. From gui virtual-manager (after being asked for root passwd) tried to create new machine. When pressed on 'Finish' got this 'Permission denied' error:
Code:
Unable to complete install '<class 'libvirt.libvirtError'> internal error Process exited while reading console log output: char device redirected to /dev/pts/3
qemu: could not open disk image /sonik_data/software_archive/CentOS-5.5-x86_64-netinstall.iso: Permission denied
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 1567, in do_install
dom = guest.start_install(False, meter = meter)
File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1023, in start_install
return self._do_install(consolecb, meter, removeOld, wait)
File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1088, in _do_install "install")
File "/usr/lib/python2.7/site-packages/virtinst/Guest.py", line 1059, in _create_guest
dom = self.conn.createLinux(start_xml, 0)
File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1277, in createLinux
if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self)
libvirtError: internal error Process exited while reading console log output: char device redirected to /dev/pts/3
qemu: could not open disk image /sonik_data/software_archive/CentOS-5.5-x86_64-netinstall.iso: Permission denied
It's running as a root, what permissions we are talking about here? I'm running F14, kernel 2.6.35.10-72.fc14.x86_64, libvirtd 0.8.3
I have a PC with OpenSuse 11.1. Beside root there are two other users on the system. Now I have installed a new PC with OpenSuse 11.2. Only one user is set up until now. I installed the hard disk from OpenSuse 11.1 into the new PC on IDE Primary Slave, because I wanted to copy some files from the old system. OpenSuse 11.2 has mounted the old disk automatically in /media/disk and /media/disk-1. The problem is that I can't find any files or directories from the users. I could find only one file from root in /media/disk-1/root/Desktop. Why can't I see the files? Does it have anything to do with UID or SUID?
View 14 Replies View RelatedI am trying to install office on my fresh slack 12.2 using pkgtool. Getting not enough disk space.
My partitions are:
hda1 swap 5 gigs
hda2 / 15 gigs
hda3 /home 38 gigs.
I have already installed:
Realplayer
Audacity
Flash player
ntfs-driver
Intend to reinstall kaffiene.
Does OpenOffice require that much more disk space?
Ok so basically this isn't my harddrive but hear me out. It's a known issue but it only happened after him downloading stuff off priate bay. The harddrive is not detected on BIOS, so you can't boot through it, just the CD Drive is now detected. You can't use SAFE mode as it reverts to another issue, a black screen with a white cursor, no keyboard commands work.
No restoring disks will fix it nor master disks, it's literally a bad *** issue. Thou I can still load things via CD Drive so I used the Acronis Bootable Media and surely enough, it could anaylse data on the harddrives. I thought maybe i'll try PE Bart but once again, loads up to Black screen with White Cursor. So I put in Ubuntu and yes, I can get on the GUI, but I can't install the operating system.
There would always been an issue. something about in/out whilst installing but as long a I can use the tools, then we go onto Disk Utility. When I try to format, the Error Message apprears stating : Eroor creating File System: helped exited with error code 1: Error calling fsync(2) on /dev/sda2: Input/Output error. This would be the same error i would get via installing and I would have to ignore and eventually whilst installing, from being complete on the right hand side, it would say ERROR or ABORTED after 70,000.
System:
Ubuntu 9.10
Gateway SX2802 (Core 2 Quad)
4GB RAM
750GB drive
Everything was fine for the first 6 months. Now in the past couple weeks, my disk drive is running nearly constantly. I can hear it rattling away in the background no matter what I am doing. Typically, I just have Firefox open, and that disk drive is sounding like it's writing the whole thing over and over.
I've opened the system monitor and looked for something obvious, but everything says, "sleeping". The computer seems to operate fine - no crashes, no odd behavior. What's this thing doing?
I tried to upgrade to the newest ubuntu version (10.04 I think). Now I can't even boot my computer. After the initial "boot" stuff, the ubuntu screen comes on and then locks up in the process. I get the message "The disk drive for / is not ready yet or not present. Continue to wait; or press s to skip mounting or M for manual recovery."I've tried "waiting" overnight to no avail. I tried the "S" command to skip and got the message "[141.233783] Adding 1502036k Swap on /dev/sdb5. Priority-1 extents:1 across:1502036k"
I think the manual recovery is what I need to do. When I type the "M" for manual recovery I get a maintenance shell with the last line being.Can anyone please give me some commands to fix this problem? I have an OLD ubuntu boot disk. How can I get my computer to boot from it? I tried hitting "esc" while booting up to no avail. I also tried hitting F1 while booting up. I think that used to allow me to boot from the CD drive...but doesn't work now.
On a cold start-up or after some package installations on re-start I get this message:
"The disk drive for /home is not ready yet or not present".
My disk partitions are:
Swap - 4 gig
/ - 25 gig
/home - remainder of 120 gig drive. about 96 gig
Last error: Installed the numlockx package and made the modification to .../init/Default.
Error on Cold start this AM.
Right clicking on a drive will format the drive but Disk Utility 2.30.1 included with Ubuntu 10.10 will not format the drive and says the drive is busy.
View 2 Replies View RelatedI have a Windows XP pc that has become corrupted and I have a image of the drive that I want to restore, however Drive Image won't allow me to restore to the main system drive. I was wondering if it is possible to use the Live CD and then do the restore through Ubuntu. I know it's probably a long shot but thought I'd ask anyway.
View 2 Replies View RelatedI upgraded my computer from Ubuntu 10.10 to 11.04 and now the OS doesn't boot correctly. I keep getting the same error msg after selecting Ubuntu from the grub: 'The disk drive for / is not ready yet or not present.' Underneath that line is the other msg: 'Continue to wait; press S to skip or M for manual recovery.'
I tried them both and if i press S then it gives another err msg: 'The disk drive for /tmp is not ready or not present' ; 'Continue to wait; or press S to skip or M for manual recovery' now if i press S then it shows a black screen with this msg:
Code:
mountall: Plymouth command failed
mountall: Disconnected from Plymouth
How do i recover my system now... I don't want to reinstall the whole of ubuntu 11.04 but i just want the old system back or Ubuntu 11.04 back in working order. I f i continue to wait nothing happens except the screen goes black. I know theres a way through the command line but how?
