Ubuntu :: Disk Drive For / Is Not Ready Yet Or Not Present?
May 3, 2011
I upgraded my computer from Ubuntu 10.10 to 11.04 and now the OS doesn't boot correctly. I keep getting the same error msg after selecting Ubuntu from the grub: 'The disk drive for / is not ready yet or not present.' Underneath that line is the other msg: 'Continue to wait; press S to skip or M for manual recovery.'
I tried them both and if i press S then it gives another err msg: 'The disk drive for /tmp is not ready or not present' ; 'Continue to wait; or press S to skip or M for manual recovery' now if i press S then it shows a black screen with this msg:
Code:
mountall: Plymouth command failed
mountall: Disconnected from Plymouth
How do i recover my system now... I don't want to reinstall the whole of ubuntu 11.04 but i just want the old system back or Ubuntu 11.04 back in working order. I f i continue to wait nothing happens except the screen goes black. I know theres a way through the command line but how?
View 9 Replies
ADVERTISEMENT
Jun 11, 2010
I tried to upgrade to the newest ubuntu version (10.04 I think). Now I can't even boot my computer. After the initial "boot" stuff, the ubuntu screen comes on and then locks up in the process. I get the message "The disk drive for / is not ready yet or not present. Continue to wait; or press s to skip mounting or M for manual recovery."I've tried "waiting" overnight to no avail. I tried the "S" command to skip and got the message "[141.233783] Adding 1502036k Swap on /dev/sdb5. Priority-1 extents:1 across:1502036k"
I think the manual recovery is what I need to do. When I type the "M" for manual recovery I get a maintenance shell with the last line being.Can anyone please give me some commands to fix this problem? I have an OLD ubuntu boot disk. How can I get my computer to boot from it? I tried hitting "esc" while booting up to no avail. I also tried hitting F1 while booting up. I think that used to allow me to boot from the CD drive...but doesn't work now.
View 9 Replies
View Related
Jan 25, 2011
During the boot, the following message appears:The disk drive for /media/sdb1 is not ready yet or not present Continue to wait, press S to skip or M for manual recovery. This started to appear after I use the "pysdm" application.
View 4 Replies
View Related
Jan 29, 2011
I am trying to install 10.10 from a Live CD over my 9.04 (it would not do the upgrade automatically due to apparently lack of disk space.) at the end of the my best guess at the process (alas, Linux is pretty much a plug and pray operation for me.), on rebooting, I get the message: "the disk drive for / is not ready yet or not yet present" I must have messed up at the Allocate Drive SPace / Edit Partition step. I have three existing partitions:
7Gb for OS previously 9.04
35GB for data (which I clearly don't want to mess with)
a a bit for Swap.
So, I have clicked on the 7GB partition /dev/sda1 and have another window, Edit Partition, which is asking me: New partition size (I would just leave it at 7007) Use As (I presume I can leave it as EXT4?) Format the Partition (NO unchecked?)and Mount Point? Now here is where I don't have a clue. The pull down options are:
/, /home, /boot, /tmp, /usr, /var, etc.
not knowing any better, my first time through I just picked "/" and that is what got me to the message "the disk drive for / is not ready yet or not yet present" So what should I be specifying at this point?
View 9 Replies
View Related
May 6, 2011
I've tried to use that thread to help but to no avail, i tried to use this:
[URL]
BUT I CAN'T OPEN A TERMINAL!!! as i am at a point where the screen says: Continue to wait, press S to skip or M for manual recovery. so if i run this command : gksudo gedit /etc/fstab my computer whines about there being no way to show this on the screen, I have tried this:
Use a non-graphical editor, like emacs or vi. Try Ctl+Alt+F3 -- you should get a login prompt. Login to an account with admin privileges (like, the first account you created, for example), and then type 'sudo vi /etc/fstab'; that will open /etc/fstab in the vi editor. Make your changes, save them, exit the editor, reboot... but if you're not used to working with a non-graphics-based editor, you'll have a bit of research to do. It's not hard, though, just tedious.however i have not managed to make it work.
View 9 Replies
View Related
Oct 15, 2010
On rebooting or initial start up intermittent problem:"The disk drive for /home is ready yet or not present." It seems to happen on a cold startup and if a change is made in init/default file. (addition of the numlockx package modifcation.) So far a second or third restart will find the directory and complete the start-up.
On a 120 gig hard drive I have these partitions:
4 gig swap
25 gig /
90+ gig (the remaining space) /home
View 1 Replies
View Related
May 20, 2011
I was upgrading to Ubuntu 11.04 and the laptop turned off.Once I rebooted, I got this Message :Code:The disk driver for / is not ready yet or not present continue to wait; or press S to skip mounting or M for manual recovery.My laptop Model: Toshiba Satellite A200.
View 3 Replies
View Related
Jun 5, 2011
Due to complications, the laptop running Ubuntu had a hard reset during the 11.04 update. Now when I try to turn on the machine, I'm met with: "The disc drive for / is not ready yet or not present Continue to wait; or Press S to skip mounting or M for manual recovery" Anyone with a similar experience or the technical knowledge able to help with this?
View 1 Replies
View Related
Oct 15, 2010
On a cold start-up or after some package installations on re-start I get this message:
"The disk drive for /home is not ready yet or not present".
My disk partitions are:
Swap - 4 gig
/ - 25 gig
/home - remainder of 120 gig drive. about 96 gig
Last error: Installed the numlockx package and made the modification to .../init/Default.
Error on Cold start this AM.
View 2 Replies
View Related
Jan 30, 2011
I've been seeing issues with this for the last few months when getting kernel updates. Never on every reboot, but this last time has been somewhat stubborn. Usually I can go back to the previous kernel, boot, reboot and I'm good. But not this time.My fstab:
Code:
# /etc/fstab: static file system information.
#
[code]....
View 3 Replies
View Related
Jan 26, 2011
I have a very strange problem. My computer is unable to boot from any hard disk but is able to boot from any CD or DVD. I have double-checked the BIOS settings and I am unable to figure out why is this happening. I have noticed that the Windows installer boots from the CD only if one presses a key when the message "Pressany key to boot from CD..." is displayed on the screen, otherwise it boots from the first hard disk.I have a triple boot system with Windows 7 (64-bit), Ubuntu 10.10 (64-bit), and Fedora 14 (64-bit). I have a dedicated GRUB2 partion on one of my disks. What I want is a boot-loader (any would do) on a CD/DVD/USB drive to chain load the GRUB2 present on my hard disk, without a delay, that is, without showing any message, menu, warning, etc. So, is there a way to do that?
View 6 Replies
View Related
Jul 19, 2010
I have an annoying issue when loading Ubuntu it gives a message sdc1 and sdb1 being not ready. I have to press S to skip the two messages and continue loading.
The problem is that sdc1 is my DVD drive and sdb1 is my USB drive, so naturally they are not always present.. Its really annoying, is there anyway I fix this so it stops doing this every time I reboot.
Also I think its connected but if I do boot without these present, when i do plug for instance my usb drive in once loaded, it will not mount, I have to reboot with it plugged in.
View 9 Replies
View Related
Dec 8, 2010
I shut down my Ubuntu 10.04 (recently upgraded from 9.04 to 9.10 to 10.04) and moved it to another location with a different monitor, keyboard, mouse. When I booted, a screen came up stating:
Quote: The disk drive for /mnt/foobar is not ready yet or not present. Continue to wait; or press S to skip mounting or M for manual recovery
View 14 Replies
View Related
Mar 14, 2011
I have a music server running on Ubuntu10.04.
The mainboard is a Gigabyte GA-MA790FXT-UD5P [URL].
Problem #1: Approx. four out of five times my dvd-rw is not available to the system. If I wish to burn a cdrom, the computer has to be restarted three or four times before the dvd-rw is available. But then it always works without a flaw.
Problem #2: This morning after booting, the system started and displayed a message: "Disk sdf is not ready for mounting, press S to skip or M to fix the problem" I pressed M and edited /etc/fstab, then continued to start-up. Then I started Disk Utility. The harddisk sdf is clearly visible: it's a Samsung HD642JJ and according to three different Smart tests the disk is healthy. But the harddisk is completely absent in the rest of the system. The blkid command does not report sdf, and 'fdisk -l' does not print anything about sdf.
As far as I have been able to test the hardware is healthy. All connections are in good condition, there are no loose connectors. So after thinking about these problems I have a suspicion towards hald and/or the enumerator. I have attached the dmesg output.
View 7 Replies
View Related
Apr 13, 2010
I have a security cam watched by a computer with Motion. on that computer i use hdparm -S 240 /dev/hdb to stop the harddrive where the pictures go from running when not used (witch is usually 2 days in a row). Now when motion is detected, the first 3 or 4 pictures are saved, and then there is a pauze for about 5 sec. before the next picture. This has to do with the hard-disk spinning up (I tried without), but I don't understand why not more pictures are held in memory until the disk is ready. how to solve this without having the disk running all days?, or what i should start reading
motion (version 3.2.9)
Debian lenny
Kernel 2.6.26-2-686
hdparm v8.9
PII with 384mb ram
[code]...
View 6 Replies
View Related
Nov 15, 2010
why I get this message during startup? I have to chose efore I can start up my system."The disk drive for /data is not ready yet or not presentContinue to wait; or Press S to skip mounting or M for manual recovery"Once upon a time I had a partition with that label, but I've since deleted it and resized my system partition to use that space. Why does my system keep looking for this drive?
View 7 Replies
View Related
Jan 16, 2011
This is on an old desktop system (1999-ish)with a 20Gb hard drive on which I had installed Linux distro. called BasicLinux 3.0.
The HDD was partitioned into 3 primary, 1 extended, and a swap.
I have lost total access to the drive. Nothing will report anything except the error as in post subject:
hda: drive not ready for command.
fdisk, e2fsck, badblocks, all give this error message plus a lot of other messages such as:
ide0: reset: success
hda: status timeout: status= 0xd1 (busy)
end_request: I/O error, dev 03:00 (hda)sector 0
ONLY thing that shows anything is:
cat /proc/partitions
major minor #blocks name
3 0 19938240 hda
Related (?) occurrance:
System did boot from CD into PuppyLinux once, but now will not boot into any Distro., but does "start" to boot, ie, first screen of distro. and then nothing, system hangs.
View 9 Replies
View Related
Feb 19, 2010
Recently we started getting these errors in syslog:
Code:
[31944.813993] hda: status timeout: status=0xd0 { Busy }
[31944.813993] ide: failed opcode was: unknown
[31944.813993] hda: drive not ready for command
[31949.822516] hda: status timeout: status=0xd0 { Busy }
[Code]....
Also the machine was under very high load and almost impossible to connect to.
I've searched, and found mostly answers involving broken hard disks or other hardware issues, but this is unlikely to be the case here: it started happening on several machines at the same time. They are HP DL580G5, and hda is the DVD player. It's not being used. The only thing we've recently changed is that we installed HAL (as a dependency of pcscd), and sure enough, killing HAL freed up the cpu and stopped the stream of errors. Sadly, pcscd requires HAL..
Has anyone seen this? Are there known problems with HAL in Lenny on HP hardware? I know I could do hal-disable-polling /dev/hda but I don't want to simply ignore a potential problem.
EDIT: versions used are HAL 0.5.11-8, pcscd 1.4.102-1 and kernel 2.6.26.2-amd64
View 1 Replies
View Related
Jul 27, 2009
I installed successfully an updated Centos 5.3.However I'm receiving the following error in the terminal and I just wonder if this is a configuration issue from my side.This is the error I'm reeiving hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }hda: drive_cmd: error=0x4 { AbortedCommand }ide: failed opcode was: 0xecPlease
View 3 Replies
View Related
May 8, 2011
I have installed UBUNTU inside my Windows XP. But the Windows is now corrupt and i want to format the windows drive. Is there any way that i can format the drive in which windows is present without effecting UBUNTU.Note:- Windows and UBUNTU are on different drives.
View 1 Replies
View Related
Jun 10, 2011
I have a network drive connect to my lan with iomega's iconnect device. I am getting tired of mounting the drive manually each time I want to use it. I would like therefore to have it mounted automatically on boot by placing a line in fstab, but since the computer (a laptop) won't always be connected to my home lan, this might cause problems. Is there a way to list the drive in fstab so if the drive is not present it will just move on?
View 8 Replies
View Related
Oct 30, 2010
I have to computers: 'A' (linux) and 'B' (windos). On 'A' I have a linux system that i copy over to a movable disk on which i install the lilo bootloader. Now when I move the disk to 'B' I am able to boot into the new linux system, however I would like to have an item in the lilo boot menu from which I can boot the windows system on 'B' also. And now the tricky part: I would like to create this item when the disk is still on 'A' where windows is not present.
I have tried using "disk = /dev/hda1 inaccessible" without any luck.Is it possible to "cheat" lilo into adding an item pointing to a disk that is not present on your system ?
View 2 Replies
View Related
Mar 17, 2010
I just installed Debian onto a PowerPC G4 Tower with two hard drives. I left OS X on one of the drives and reformatted and installed Debian on the other, using the installer from the 60Mb ISO from the Debian website.
The installation had no issues and it starts yaboot and Debian no problem.
After about 2 minutes of the booting up process, it starts to output this, every five seconds:
While this happens, other things still continue load and it outputs occasional messages and even gets to "Debian Login:" where if you type really quickly and hit enter, it takes it and prompts for "Password:" right after the next round of the above messages.
I have not been able to completely log in yet.
I can start up into the shell as root with "Linux single" with no problems.
I think this might have something to do with the second Mac OS Formatted Hard drive. I have considered unplugging that drive and testing it that way, but I am looking for a solution to turn off whatever script is running that every five seconds and failing, regardless of what it is trying to do.
View 9 Replies
View Related
Sep 25, 2009
I had Windows 7 RC installed and F10 on the same machine. HP 6730s Intel Dual Core. Everything was working fine and I don't remember doing anything special when installing Fedora 10. I decided to install F11 from DVD, installation went fine but after rebooting all I get is "non-system disk error or disk error. replace and strike any key when ready". I couldn't find any relevant post in this forum and googling I found that this could be a disk starting to fail but I don't thing this is the case here. I'm trying to reinstall just now, I chose to install grub at /dev/sda (default), should it be /dev/sda1 ?
View 7 Replies
View Related
Jun 14, 2011
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies
View Related
Feb 16, 2011
Ok so basically this isn't my harddrive but hear me out. It's a known issue but it only happened after him downloading stuff off priate bay. The harddrive is not detected on BIOS, so you can't boot through it, just the CD Drive is now detected. You can't use SAFE mode as it reverts to another issue, a black screen with a white cursor, no keyboard commands work.
No restoring disks will fix it nor master disks, it's literally a bad *** issue. Thou I can still load things via CD Drive so I used the Acronis Bootable Media and surely enough, it could anaylse data on the harddrives. I thought maybe i'll try PE Bart but once again, loads up to Black screen with White Cursor. So I put in Ubuntu and yes, I can get on the GUI, but I can't install the operating system.
There would always been an issue. something about in/out whilst installing but as long a I can use the tools, then we go onto Disk Utility. When I try to format, the Error Message apprears stating : Eroor creating File System: helped exited with error code 1: Error calling fsync(2) on /dev/sda2: Input/Output error. This would be the same error i would get via installing and I would have to ignore and eventually whilst installing, from being complete on the right hand side, it would say ERROR or ABORTED after 70,000.
View 9 Replies
View Related
Apr 15, 2010
System:
Ubuntu 9.10
Gateway SX2802 (Core 2 Quad)
4GB RAM
750GB drive
Everything was fine for the first 6 months. Now in the past couple weeks, my disk drive is running nearly constantly. I can hear it rattling away in the background no matter what I am doing. Typically, I just have Firefox open, and that disk drive is sounding like it's writing the whole thing over and over.
I've opened the system monitor and looked for something obvious, but everything says, "sleeping". The computer seems to operate fine - no crashes, no odd behavior. What's this thing doing?
View 3 Replies
View Related
May 4, 2010
Why do i have trouble opening my dvd drive When there is no disk in it is there a setting i have wrong or is it my dvd is packing up it plays well and copies every thing i put at it, opens when i have disk in it but not when no disk in.
View 9 Replies
View Related
Nov 24, 2010
Right clicking on a drive will format the drive but Disk Utility 2.30.1 included with Ubuntu 10.10 will not format the drive and says the drive is busy.
View 2 Replies
View Related
Dec 14, 2010
I have a Windows XP pc that has become corrupted and I have a image of the drive that I want to restore, however Drive Image won't allow me to restore to the main system drive. I was wondering if it is possible to use the Live CD and then do the restore through Ubuntu. I know it's probably a long shot but thought I'd ask anyway.
View 2 Replies
View Related
