Ok so basically this isn't my harddrive but hear me out. It's a known issue but it only happened after him downloading stuff off priate bay. The harddrive is not detected on BIOS, so you can't boot through it, just the CD Drive is now detected. You can't use SAFE mode as it reverts to another issue, a black screen with a white cursor, no keyboard commands work.
No restoring disks will fix it nor master disks, it's literally a bad *** issue. Thou I can still load things via CD Drive so I used the Acronis Bootable Media and surely enough, it could anaylse data on the harddrives. I thought maybe i'll try PE Bart but once again, loads up to Black screen with White Cursor. So I put in Ubuntu and yes, I can get on the GUI, but I can't install the operating system.
There would always been an issue. something about in/out whilst installing but as long a I can use the tools, then we go onto Disk Utility. When I try to format, the Error Message apprears stating : Eroor creating File System: helped exited with error code 1: Error calling fsync(2) on /dev/sda2: Input/Output error. This would be the same error i would get via installing and I would have to ignore and eventually whilst installing, from being complete on the right hand side, it would say ERROR or ABORTED after 70,000.
Recently, I made a disk image of my external hard drive (as it had recently failed). I have yet to get it replaced, so I have a .dd file sitting on my computer. Now, I can mount the .dd file so I can access the files, but I cannot delete any of them. I want to be able to copy the files file by file to my normal folders and delete them from the backup file, as my disk isn't large enough for me to copy them all to the folders and just delete the entire file.
TL;DR = Can I/How do I delete individual files from a .dd backup.
I've been getting this error message:"The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."a few times, and it turns out to be because of low disk space. No worry, I empty the trash uninstall unneeded programs and clean out the downloads folder that filled up my disk. And all is ok. But not this time.Since I can't use X, I delete stuff from the terminal, and also make sure to clean out the .Trash in both /home and /root. But still the disk is full. I delete more stuff, but it doesn't even seem to go to .Trash. It disappears, but no more disk space.
I noticed on a couple of my friend's computers, the baobab with Fedora and Arch Linux was able to delete folders by right clicking on them. The Baobab with Ubuntu does not have that feature. I then looked at then obtained the source code and ran ./configure --help, and saw nothing about enabling that feature.
When I delete files from my usb flash drive on my Karmic laptop (press del key), the properties of the drive remain unchanged (available space/used space). It looks like the files/folders have been deleted, but when I go to my windows machines, the files and folders are now in a folder marked "Trash".Am I missing a step when attempting to delete the information when connected to my ubuntu laptop?
Code: fdisk -l Device Boot Start End Blocks Id System /dev/sda1 1 3724 29912998+ 83 Linux /dev/sda2 29256 30401 9205245 7 HPFS/NTFS /dev/sda3 3725 4271 4393777+ 5 Extended /dev/sda4 * 4272 12104 62918572+ 83 Linux /dev/sda5 3725 4271 4393746 82 Linux swap / Solaris
I want ot install a new opensuse 11.4 as yest another OS. Due to the fact that I already have 4 sda partitions, I have to make some changes. What I am thinking about is to copy the sda2 (windows recovery) data to some folder etc (nevermind), then delete the sda2. Then I want to create a new primary partition for the new suse 11.4 and install it. What is worying me is the grub boot menu. I was planning to edit the new one (the opensuse 11.4), with old data.
Code: ###Don't change this comment - YaST2 identifier: Original name: linux### title Desktop -- openSUSE 11.2 - 2.6.31.5-0.1 root (hd0,3) kernel /boot/vmlinuz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105BB0F00WDHE41DC-part4 resume=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105$ initrd /boot/initrd-2.6.31.5-0.1-desktop .....
Now my question is will the settings of (hda0,n), change due to the fact that I have deleted the sda2? I have a lot of unused space at the end of my disk and want to create a new "sda2" there.
My trash won't delete and it is causing me to not be able to use my flashdrive. When I tell my trash to empty it will either say it will but the files will still be there or it will say a can't b/c i didn't delete it from my trash(screenshot). I don't know what to do to get it to get rid of the files since I tried telling it to bypass the trash and that didn't do anything.
I had to recently reinstall ubuntu because 10.04 started acting up on me. I reinstalled 9.04 but I don't know how to mount my RAID drive without messing with the data that's already on there. I have the UUID for the RAID but fstab isn't able to find it. I also previously used RAID software but I don't remember which one I used. how to mount my drive so that ubuntu can see it?
I recently bought a Buffalo 500GB ministation usb with "optional disk encryption". Turns out, I'm having one hell of a time trying to remove the "optional" from the drive. I figured I could just delete the program that is on the disk, and go on my way. That doesn't seem to be the case.
fdisk /dev/sdc1, then "p" showed that there were 4 partitions. So I deleted them one by one. "n" gave me a new partition. "t" I used 87 because I will be using it on windows. Then "w" to write everything. mkfs -t ntfs /dev/sdc1 - all went well. fsck -f -y /dev/sdc1 - all went well
Then I took the removed the drive and plugged into Windows only to find that the "optional" is still there. It actually creates a virtual drive with the "optional" software. So I tried it over again. I tried fdisk only to see that the partitions were back (as if they were never removed). I removed them again, and used primary partition as linux and wrote to disk. As a hunch, I checked permissions. Can't remember what it said, but I did change them.
chmod 777 /dev/sdc1
Then in a last hope of desperation, before coming to work today, I decided to dd the drive. dd if=/dev/zero of=/dev/sdc1 bs=4k conv=notrunc Is it possible that the "optional" stuff is actually hard coded onto a chip, or something inside the drive and I may never get rid of it?
I have Intel Pentium3 motherboard model 845GVSR with 40 GB Hard Drive, DVD/CD ROM and 4 USB slots but no Floppy Drive.My PC was working fine until I deleted the contents of hard drive accidentally using trial version of killer software.I ried to install Linux by making a boot-able CD, but it did not work.Then i tried to make a boot-able USB using Universal Notebook Installer, it did not work either. I just get the Error " Error loading operating system.Then I tried a free software from net by the name James Format Tools - DOS on USB. Using this computer did boot but DOS did not install and I got the error message "invalid drive specification".I understand that now I will have to write boot sector afresh and will have to Format the hard drive,, but how to do this as all my attempts to get to the hard drive failed
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
Everything was fine for the first 6 months. Now in the past couple weeks, my disk drive is running nearly constantly. I can hear it rattling away in the background no matter what I am doing. Typically, I just have Firefox open, and that disk drive is sounding like it's writing the whole thing over and over.
I've opened the system monitor and looked for something obvious, but everything says, "sleeping". The computer seems to operate fine - no crashes, no odd behavior. What's this thing doing?
Why do i have trouble opening my dvd drive When there is no disk in it is there a setting i have wrong or is it my dvd is packing up it plays well and copies every thing i put at it, opens when i have disk in it but not when no disk in.
I tried to upgrade to the newest ubuntu version (10.04 I think). Now I can't even boot my computer. After the initial "boot" stuff, the ubuntu screen comes on and then locks up in the process. I get the message "The disk drive for / is not ready yet or not present. Continue to wait; or press s to skip mounting or M for manual recovery."I've tried "waiting" overnight to no avail. I tried the "S" command to skip and got the message "[141.233783] Adding 1502036k Swap on /dev/sdb5. Priority-1 extents:1 across:1502036k"
I think the manual recovery is what I need to do. When I type the "M" for manual recovery I get a maintenance shell with the last line being.Can anyone please give me some commands to fix this problem? I have an OLD ubuntu boot disk. How can I get my computer to boot from it? I tried hitting "esc" while booting up to no avail. I also tried hitting F1 while booting up. I think that used to allow me to boot from the CD drive...but doesn't work now.
Right clicking on a drive will format the drive but Disk Utility 2.30.1 included with Ubuntu 10.10 will not format the drive and says the drive is busy.
I have a Windows XP pc that has become corrupted and I have a image of the drive that I want to restore, however Drive Image won't allow me to restore to the main system drive. I was wondering if it is possible to use the Live CD and then do the restore through Ubuntu. I know it's probably a long shot but thought I'd ask anyway.
I upgraded my computer from Ubuntu 10.10 to 11.04 and now the OS doesn't boot correctly. I keep getting the same error msg after selecting Ubuntu from the grub: 'The disk drive for / is not ready yet or not present.' Underneath that line is the other msg: 'Continue to wait; press S to skip or M for manual recovery.'
I tried them both and if i press S then it gives another err msg: 'The disk drive for /tmp is not ready or not present' ; 'Continue to wait; or press S to skip or M for manual recovery' now if i press S then it shows a black screen with this msg:
Code: mountall: Plymouth command failed mountall: Disconnected from Plymouth
How do i recover my system now... I don't want to reinstall the whole of ubuntu 11.04 but i just want the old system back or Ubuntu 11.04 back in working order. I f i continue to wait nothing happens except the screen goes black. I know theres a way through the command line but how?
Everytime i reboot, it appears on the screen " The disk drive for /usr/local is not ready yet or not present" . I need to click S for skip mounting to skip that part everytime
I've tried installing UNR on a 1GB flash drive in the past, and on two occasions it completely broke due to lack of disk space. When I say broke, it was when I was trying to install or upgrade packages, it said it ran out of disk space, everything slowed right down, and in the end I had to restart. I was put into a recovery shell and after poking around for about 30 minutes, gave up. Then reinstalled.
Now my shiny new 4GB flash drive is split into two sections, one for documents (1.9GB) and one for the installation+persistency file (1.9GB). I went about updating the UNR system, adding software I need (some of which is quite big, anti-virus software, lyx etc), and quickly found the old warning message: disk space low. hastily make some free space (apt-get clean, delete a big firefox cache), and post this message. My questions:how do I find out how much disk space is left on this 1.9GB partition - specifically the persistency file? I've tried disk usage analyzer, also du -h, but can't really understand it. I want to be able to see ahead of time when I am short of disk space. I would like to switch to using XFCE instead of gnome for speed and disk space. Is this possible? What is the best way to switch, without risking maxing-out disk space and crippling the system again? is there are way to take a snapshot of the whole partition? I would like to back it up in case it goes haywire again. Would I just want to copy the persistency file, that's it?
I just bought a new 2 TB hard disk to replace my old 175 gig one. I currently am dual-booting Lucid Lynx and Windows 7, and rather than go through the process of reinstalling both, then reinstalling all my programs, settings, and everything, I was wondering if there's a way I can just copy the partitions on my 175 GB disk to the new one, grow them to fill up the rest of the free space on the new 2 TB disk, and then plug that HD into the primary master plug on my motherboard... will that work?
I am trying to run You Don't Know Jack in wine - appdb says it has Platinum status, so compatibility shouldn't be the issue. My laptop doesn't have an optical disk drive. So, I ripped the disk to an iso image, mounted it with gmount-iso, and tried to open the program.
The program still says the disk is not inserted. I know on previous laptops with optical drives, I could mount an image on /dev/cdrom0 or /dev/sr0 or whatever and it would be recognized. My /dev directory had no cdrom0 directory, so I made one. I mounted the iso there but it still didn't recognize it. I've tried in my home folder, in /cdrom, and in my newly-created /dev/cdrom0 but no luck.
This Windows installer (Wubi) will help you to run Ubuntu within your current system.
What exactly is meant my this? Does this mean it is an easier way to install the dual boot with Windows? (I am using Windows-7 on a new PC.) Or does it mean it will install Ubuntu under Windows? I assumed it meant the latter.
In any case, I downloaded it - a mere 1024K, scanned it and ran it. I get a stubborn error box with the message:
Quote:
There is no disk in the drive. Please insert a disk into drive
And that box will not go away - no matter what I press, including the [X] button in the upper corner, the box reappears. I had to go into Process Explorer to kill pyrun.exe and its parent, pyl5E39.tmp.exe before the [Cancel] button would close it for good.
I could not find doc on this so I don't know what it really wants as a prerequisite to running wubi.
i was using vista in my laptop, recently installed ubuntu in another drive partition which is 69 GB. but during ubuntu installation i gave only 16GB to ubuntu from this drive. i guess the remaining 69 GB - 16 GB = 53 GB is unused space now.. now how can i allocate all 69GB in that drive to ubuntu ?
I 've just upgraded to Ubuntu 11.04 and I had a really hard time doing so. I have downloaded and burned the ISO, I restarted in order to install ubuntu and my computer booted from the disk drive, no problem so far.After I chose my language the purple screen with the option "Install Ubuntu" appeared and I highlighted the option and pressed "Enter". THEN, I got a black, empty screen while I was able to listen to my disk drive reading the disk.Everything was OK except for my screen.I thought there was a problem with the ISO or the disk itself. But, I 've tried different CDs and DVDs and I also downloaded the ISO several times. Unfortunately, I had always the same problem: disk drive working (making sound), screen-->BLACK-EMPTY. I was about to give up hope when I decided to turn on my desk lamp because it was getting dark. I was working on my last attempt and after I, once again, pressed "Enter" on the "Install Ubuntu" option I got the same dark screen as always but this time, because of the lamp, I saw that Ubuntu was actually being installed but the screen did not have any light. I managed to install it properly using my lamp to see what's going on on my screen but it's obvious that I can't possibly work that way. SO, how do I make my screen light come back so I can enjoy my new OS???
Note: My screen is working perfectly with windows so, it cannot be a hardware problem.
After many hours trying to install Ubuntu(netinstall-64bit) i can not find any solution to get it working. I set-up via KVM and virtual device. Installation gives me error "No disk drive detected" when trying to detect discs/hardware. Someone told me i have to load megasr-source_13.13.1021.2009-1_all.deb by virtual-usb. It should include drivers for the controller not delivered by ubuntu-setup. After that I got to next setup-step partitioning, but it only shows me an IPMI-device which is either the virtual usb or cd i suppose.
System is one week old and I got it with pre-installed debian64bit which is working fine. So i dont think its hardware causing this.
create a partition seperate from my home directory out of it. i have a 500 gig hard drive and i wish to create a 70 gig partition on it on install i used entire disk is there any way to make a partition after this for i do not want to reinstall.
