Does anyone have experience installing CentOS on this machine (dual boot with win7)? It is Intel Core i3, 4G RAM, 500GB HDD. After starting from installation CD, when hit enter to install CentOS, a bunch of text was thrown onto the screen, the last message was: Kernel panic, can not sync ...
View 8 RepliesI did a clean install, replacing 11.3 with 11.4 (BTW, why couldn't 11.4 recognize a ext4 partition??). When I boot, the cursor is a garbage block in the center of the screen. When I move, the cursor disappears. The display never progresses past the splash and no progress bar appears. When I boot in safemode, it works, but the display is slow and jerky. This is such a show stopper for me that I had to revert to 11.3 which does not like my touchpad.
View 3 Replies View RelatedI had a similar problem with previous ubuntu release on the same machine: and again, I have no sound at all.
View 9 Replies View RelatedRecently I tried to install openSUSE 11.2 on my HP Pavilion dv6-2125tx notebook PC which comes preloaded with Windows7. I used a DVD to install the openSUSE. Before installation, I created partitions on my hard drive for root, /home and swap by shrinking the C volume. This is the only way to create partitions on my laptop. I used NTFS filesystem during format of these partitions. During installation, the first error message that appeared was YaST error saying that it could not format the partitions though it was allowing me to set mount points and filesystems for the partitions I had created. The next problem was swap. I was not able to see the mount point and F (for format) for the swap partition. However when I continued by ignoring the warning for swap there was a partition for swap and it was the same partition I wanted to have for swap. So, I clicked the Install button. The next problem was grub error 17: cannot mount the partition. And then when I continued ignoring this too, the computer did not get any of the OSes saying that BOOTMGR (BOOT MANAGER) is missing. I had no options left but to recover it using recovery disks of my laptop.I searched a bit on the internet and found that grub error 17 happens if the corresponding partition exists but the filesystem is not recognized by the GRUB.
I concluded that it was happening bacause YaST was unable to format any of partitions with the filesystem selected. So in my next attempt, I formatted the partitions in FAT32 filesystem in Windows which I think GRUB can recognize. I did that because even if YAST would be unable to format the partition the filesystem could be recognized by GRUB.And I think that happened but I got a new error this time.The grub error 22.Now I don't know what to do. One thing that I am expecting is that my hard drive cannot be partitioned in the correct way for linux. I can only shrink the volume and create logical partitions only from one dynamic partition c. And that may be the reason YaST could not format the partitions in the correct filesystem and inturn the grub error is happening.
I am trying to install Ubuntu 10.04 on my laptop, a rather new HP Pavilion dv6-2044el. Windows 7 is already installed, so I've tried "installation inside Windows". I have been using Ubuntu for at least a couple of years, and this is the first time there is no way to complete an installation : The process halts after restarting the system. A few months ago I managed to install Ubuntu 9.10 on this laptop without any trouble, before disinstalling it. I have tried:
ubuntu-10.04-desktop-i386.iso ubuntu-10.04-desktop-amd64.iso both from a CD and an USB flash drive, always with the same frustrating result. I tried also to install 9.10 first and then upgrade to 10.4, but the upgrade didn't work either. Today I even tried Maverick Meerkat (maverick-desktop-i386.iso) from a USB flash drive, but it also halted during the process. [tags: HP, Hewlett Packard, Pavilion, 2044el, Lucid Lynx, Maverick Meerkat]
Whenever I try to install 10.4 on my daughter's HP Pavilion dv6000 the installation screens show up as stripes, three of them, on the page.I don't ever see a full screen so I can't run the install. I've tried the 32bit, the 64 bit, and the dual boot for Windows options.
View 1 Replies View RelatedI create a Ubuntu boot disk 11.4 and selected Install all I got was a little white box near the bottom right of the screen. I got a new hard drive and wanted to try the linux operating system. With the boot disk the computer does boot from the cdrom drive, but I can't get it to install. After hitting forward on the screen preparing to install ubuntu the screen it says installing and gets stuck at that point. Booted from cdrom got as far as the "Who are you?"screen then the screen went blank but I can still see hard drive activity. Is it formating the drive?
View 2 Replies View RelatedI want to install suse on hp pavilion dv6 1386et. Hardware Specifications: Microprocessor: 2.66 GHz Intel Core2 Duo processor P8800 Microprocessor CacheLevel 2 cache 3 MB
[Code]...
I have tried suse 10.3, 11.2 and also redhat 5 enterprise, fedore 12 and all of them gave ACPI error. I can not install linux. only suse 11.2 had given some hopeful progress. nevertheless suse default session does not work.In all attempts screen freezes.can anyone help me? and sorry for my bad english
I completely deleted NTFS as having a boring windows doesn't make any sense today, installed it with ext4:
/boot = 200MB
/swap = 1GB
/ = space left
After successful install, the BIOS screen with HP logo remains stuck, it won't boot anything in another words. I can't get the boot loader, nothing as if it awkwardly trying to boot from external data drive. Did my hard drive go poof? or did I miss something during install? How can I get my hd to read?
I have a Hewlett Packard Pavilion dv5-1125nr laptop containing factory loaded Windows Vista. I have a lot of hard disk space on it and I wanna install Linux. But I don't know which version/distribution will work on this laptop.
View 4 Replies View RelatedI have an HP Pavilion dv6-2120ca and I'd like to find out where to find the graphics driver. This is the card: TI Mobility Radeon HD 4200 Graphics I plugged in my MP3 player in and it worked with Opensuse.
View 2 Replies View RelatedI'm clueless about this format I need to use for starting this threadI am trying to connect to the internet but have no network connections available and it says my wireless is disabled. (Ubuntu Studio 10.04)How do I turn it on?
1 ) Machine Brand and Model (PC/Laptop):
Code:
HP Pavilion, a6600f
[code]....
Installing Ubuntu on the laptop said it succeeded and required a restart, then before shutting down and after the cd popped out a string of
end_request: I/O error dev sr0, sector 2xxxxxx...
end_request: I/O error dev sr0, sector
end_request: I/O error dev sr0, sector
Thing is, grub didn't install! I'm pretty sure a full install of ubuntu 10.10 in on a partition that I can't access. To complicate matters further, loading Vista necessitated a restart when it installed a "generic volume driver" by itself. Restarting vista doesn't show any difference (obviously since vista can't see linux formatted partitions).
Atlast after a long time thinking and concerns I made it ... installed F12 on HP Pavilion using a LIVE CD ... I got a AMD turion 64 X2 with a NVIDIA graphics card (7200M this is what it says in VISTA) I am more than satisfied with F12 on my HP ... this is first time I am using Linux on LAPTOP and my previous usage is purely on desktops and have some good touch with F9 and still continuing with it. I have few doubts At present I guess I am using Nouveau drivers for my Nvidia graphics card. But I hear from communities people complaining of HIGH TEMPERATURES as open source drivers for NVIDIA are not good enough (NVIDIA doesnt release much info on them). So should I change my NVIDIA drivers to proprietary one? Any tips or gnome settings on LAPTOPS to best utilize all the resources without burning out things?
View 3 Replies View Relatedi installed it a few minutes ago,but there is a problem that there is no sound. when i boot with windows 7 sound works perfectly but when i use ubuntu it comes no sound.
View 3 Replies View RelatedI wonder if anybody could possibly help me with my new laptop. I bought a new HP Pavilion DV7-4150ea about a month ago with windows 7 x64 cough cough, hate windows and would love to be able to get Ubuntu 11.04 working on my laptop or any other version that will be ok.
What happens, when I install either live usb or install to hard drive from DVD, it locks up when I do a restart or shut down, it all seems OK until then.
Could it be the video cards installed on this laptop, as there is two 1 x 1GB ATI Mobility HD 5650 and 1 x Intel HD Graphics. Any help would be great as I love Linux and prefer it to windows every time.
If you need more info then please ask, love to get this working with linux.
I have an HP Pavilion laptop running Kubuntu 9.10. The sound worked at one point, but somewhere along the line it broke. When I test the sound in the system settings panel, I get nothing. No errors, no sound. I checked KMix and alsamixer. All channels are unmuted and turned up. I've also tried the headphone jack, and there's no sound there, either. It works fine if I boot into Windows. Here's the output from alsa-info.sh: [URL]... I would also like Amarok to work, too. I had problems in the past getting it to output sound.
View 7 Replies View RelatedBefore I go 100% ubuntu I need a few things. How can I make so if my headphones are plugged in that sound doesn't come out of my speakers? I got a HP Pavilion DV7-3065dx laptop.
Is there a TextExpander for ubuntu? I need to make it so if I hit my left and right mouse button at the same time a middle click is simulated.
I installed lucid lynx on my hp pavilion dm4 laptop, very happy with it. My wireless is not working though (I have ethernet working), I have looked for drivers for the Broadcom card that's supposed to pick it up, the light is orange. I have seen that many people have this problem, tried their solutions to no avail. I have ndiswrapper installed and have found some drivers that detect the hardware, still not getting wireless.
This is my output lshw -C network output:
Code:
rho@Schwarzschild:~$ lshw -C network
WARNING: you should run this program as super-user.
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet control
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
Logical name: eth0
Version: 03
Serial: d8:d3:85:28:a9:fb
Width: 64 bits
Clock: 33MHz
Capabilities: bus_master cap_list ethernet physical
Configuration: broadcast=yes driver=r8169 driverversion=2.3LK-NAPI ip=192.168.1.69 latency=0 multicast=yes
Resources: irq:31 ioport:2000(size=256) memory:b0404000-b0404fff(prefetchable) memory:b0400000-b0403fff(prefetchable)
*-network UNCLAIMED
description: Network controller
product: Broadcom Corporation
vendor: Broadcom Corporation
physical id: 0
Bus info: pci@0000:02:00.0
Version: 01
Width: 64 bits
Clock: 33MHz
Capabilities: bus_master cap_list
Configuration: latency=0
Resources: memory:b2400000-b2403fff
Excuse the horrid formatting, this was copy/pasted from the #ubuntu IRC and to be extremely honest I can't be bothered to remove every space. I have a Pavilion dm4 and it has two areas on the bottom of the touchpad to designate right and left clicks. This mostly doesn't work on Ubuntu in the fact that it recognizes any taps on either tap zone as a left click. Instead, I have it set so if I tap anywhere on the pad it makes a left click. There should be, and there are, many ways in the mouse configuration window to simulate a right click using only a touchpad. None of these work. Changing mouse orientation doesn't do anything, "dwell click" also does nothing,
and, the oddest part of this problem, whenever I try to turn "Simulated Secondary Click" off (it doesn't work anyways, but just to try to toggle it), the entire theme of my desktop changes to a gray Windows '95ey look. The only way to get rid of this is to close and reopen the mouse preferences window.My computer is fairly new and the Ubuntu installation is less than a day old. I didn't do anything that I think could cause this. The problem is that I can't right click. Afterword: I installed two scripts from [URL]. They didn't do anything I couldn't already do, and they did not make it possible for me to right click.
When I have headphones plugged in the speakers still work! I dont understand. I've tried other things but none have worked.
View 1 Replies View Relatedim curently using xubuntu9.10 and its lags..
View 2 Replies View RelatedI have a laptop HP Pavillion dv6000 Intel (R) Core (TM)2 CPU T5300 @ 1.73GHz. I saw online somewhere that this computer was not very compatable with one or two Distro's resulting in some of the hardware not working as there were no drivers. So I was wondering what distro would be best for me, being a bit of a novice, without me getting to lost and ensuring that the hardware will still function afterward
View 1 Replies View RelatedI have an HP Pavilion DV9330 running M$ Vista Home Premium and would like to convert over to a Linux OS (No Dual Boot). Processor - AMD Turion 64 x2 (1.6GHz)
Memory - 2 GB
Hard Drive - 120 GB
Optical Drive - DVDRW w/Lightscribe
Networking - 10/100 Ethernet
Wireless 802.11b/g Wireless
Display - 17.0" WXGA+ High-Definition BrightView Widescreen Display
Display Adapter - NVIDIA GeForce Go 6150 (UMA), Video memory up to 128MB (shared), Max Resolution 1440 x 900
[Code]...
I have an HP Pavilion zv6130us and I believe that there's something wrong with the sound driver, because I only hear system beeps..
View 4 Replies View RelatedI installed Fedora 10 on my HP Pavilion zv6130us and when the battery goes low, everything freezes over, just like that... At first I didn't know why it happened, but later I realized that it happens when it's not connected and the battery is low.
View 1 Replies View RelatedI've just installed OpenSUSE 11.2 w/KDE interface on a HP Pavilion dv5-1010us laptop.Now we're trying to get the wireless to work. It's got a built-in wireless adapter, but we're not sure what kind of adapter it is. HP's Website is no help there. According to another site, it's an Intel WifiLink 5100. I did download the wireless driver from the HP site, but it's a .exe file. Anyone had any luck setting up this or a similar HP laptop. I couldn't find this model on the HCL/Laptops/HP - openSUSE page, but it seems OpenSUSE supports wireless other HP Pavilion models.
View 1 Replies View RelatedI've just installed Ubuntu 9.10 64 bits on my new HP Pavilion dv6, but it seems to boot almost randomly. I think it might be an issue related to the ATI graphics card, but I don't know how to solve it.
View 1 Replies View RelatedI'm relatively new to Ubuntu and Linux OS in general, hope this hasn't already been solved but after trying for 24hrs+ I think it may be time for me to start my own thread (sorry if there is already one). I have been desperately trying to get my Broadcom BCM4312 wireless card to work and after searching about 100 sites and threads I still can't get it going Here are some of the problems Ive been having(I am running Ubuntu 8.04 by the way):
1. Tried installing "Broadcom STA Wireless Driver" under System->Administration->hardware drivers but after install it didn't show any signs of working.
2. I tried getting the Linux driver off the website [URL]... and followed the instructions in the readme to the letter, yet when i am asked to type in one of the final commands: # sudo insmod wl.ko
I get the output: # error inserting 'wl.ko': -1 File exists I have also looked at this website where a guy posts the same problem but no one posted anything back: [URL]...
Not sure exactly where to go on this one... I'm trying to get the embedded/stock webcam on my wife's Dell dv6000 to work.
I'm told that this webcam works fine via uvcvideo and have tried to install the package but am thinking the problem is with ubuntu's detection itself.
Outputs:
Code:
christina@christina-laptop:~$ ls -la /dev/v*
crw-rw---- 1 root tty 7, 0 2010-11-13 15:26 /dev/vcs
crw-rw---- 1 root tty 7, 1 2010-11-13 15:26 /dev/vcs1
crw-rw---- 1 root tty 7, 2 2010-11-13 15:26 /dev/vcs2
[Code]....