Ubuntu :: 10.4 Crashed - Will Not Boot During An Update
Jan 28, 2011
It happened to me again, I guess I need to ignore those updates but somehow I forget each time! This time it froze in middle of update no mouse no kybd no cap/num locks light nothing so I hard booted after an hour of wait, now I cannot boot at all. I go thru Grub menu then it says press S to skip and M to manually load. In most cases nothing works but I got to the prompt and put the root password but I dont have an IP address and cannot get 1? I did fsck -p but no errors. It says the OS is not on / or has been gone?
View 2 Replies
ADVERTISEMENT
Dec 29, 2010
When I updated Linux it crashed in the middle of the update. I think there was not enough disk space. I had a windows dual boot and tried to make the Linux partition larger but in doing that a crashed grub and can't use Linux or Windows. I tried super grub but it didn't work so I tried to fix the partitions with gparted live cd. It my disk just showed up as empty. I formatted it and re installed debian but it didn't work. I can see partitions but my computer won't boot.
View 1 Replies
View Related
Sep 30, 2010
i tried to load update manager, but a red circle with a line through it appeared next to my wireless signal bit, with the following code'E:Encountered a section with no Package:header, Eroblem with MergeList /var/lib/apt/lists/ppa.launchpad.net_teamxbmc_ppa_ubuntu_dists_maverick_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.' then a grey shap appears next to it, saying report it to ubuntu, but when i press ok, it says it cant find the error to report. i upgraded to ubuntu 10.10 the other day just for the record
View 9 Replies
View Related
May 1, 2011
I was updating Ubuntu 10.10 to 11.04 and my computer crashed/shutoff because of overheating(my laptop doesn't ever do this when running Windows 7 but seems to really need to be as cool as possible when running Ubuntu). the update was at about 12-18 minutes left(also i am using wubi to have it run alongside windows). After getting pissed off that i forgot to backup Ubuntu i restarted it to see if it would finish updating.
To my dismay it the loading screen looked a bit unusual and when it go to the login screen the word "Ubuntu" was flashing uncontrollably and the time in the bottom right corner was acting the same. i feel that i have totally ruined it and i also don't know how i can remove Ubuntu from my computer so that i could reinstall it as Ubuntu 11.04 instead of upgrading from 10.10. i still have Wubi.exe for Ubuntu 10.10 but i'm not sure if that just searches for the most recent version of Ubuntu.
View 1 Replies
View Related
May 7, 2011
I was updating my netbook to the 11.04 when it crashed (I thought is was on the grid, what do you think? it wasn't!) Now if I try to do it again I get a notification and then it stops.
These are the last few lines of/var/log/dist-upgrade/main.log:
2011-05-07 11:15:47,352 DEBUG entry 'deb [URL] natty main #Third party developers repository' is already set to new dist
2011-05-07 11:15:47,353 DEBUG examining: 'deb [URL] natty partner'
2011-05-07 11:15:47,353 DEBUG entry 'deb [URL] natty partner' is already set to new dist
2011-05-07 11:15:47,354 DEBUG examining: 'deb [URL] maverick main'
2011-05-07 11:15:47,355 DEBUG entry 'deb [URL] natty main' updated to new dist
2011-05-07 11:15:47,405 DEBUG running doUpdate() (showErrors=True)
2011-05-07 11:15:48,260 DEBUG openCache()
2011-05-07 11:15:48,261 DEBUG failed to SystemUnLock() (E:Niet vergrendeld)
2011-05-07 11:15:48,620 DEBUG /openCache(), new cache size 1668
2011-05-07 11:15:48,622 DEBUG needServerMode(): run in 'desktop' mode, (because of key deps for 'ubuntu-desktop')
2011-05-07 11:15:48,623 ERROR No 'ubuntu-minimal' available/downloadable after sources.list rewrite+update
2011-05-07 11:16:13,016 DEBUG abort called
2011-05-07 11:16:13,027 DEBUG openCache()
2011-05-07 11:16:13,028 DEBUG failed to SystemUnLock() (E:Niet vergrendeld)
2011-05-07 11:16:13,440 DEBUG /openCache(), new cache size 1668
2011-05-07 11:16:13,442 DEBUG enabling apt cron job
View 2 Replies
View Related
Nov 28, 2010
The computer crashed during an update and "An error occurred". The following details are provided:
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
E: _cache->open() failed, please report."
So,
"michael@freegeek:~$ sudo dpkg --configure -a
[sudo] password for michael:
dpkg: parse error, in file '/var/lib/dpkg/updates/0117' near line 0:
field name '
michael@freegeek:~$"
View 9 Replies
View Related
Nov 30, 2010
I always install the Ubuntu Updates that automatically pop up every few days.
Today I installed the update and it wiped out my entire Evolution database.
The Evolution e-mails and e-mail history are still there, but not a single Contact.
Is there any way to 'uninstall' today's update or go back to a time before it was implemented?
Is anyone else having this problem? I do have a database backup, but its about a month old. So I don't want to import it unless there is no way to get the current version back.
View 2 Replies
View Related
Dec 26, 2009
I was updating my F12 and the system crashed .. no idea why.. anyway I cannot boot anymore using the kernel 2.6.31.9-174, but I can boot using the 2.6.31.6-166 ... now when I issue the yum update, the system says its up-to-date...is there any way to 'force' the yum to update the system again ?
View 14 Replies
View Related
Jul 11, 2011
My system system suffers from frequent kernel panics, which I think are due to gnome-shell with the nVidia driver. (I see no panic message and nothing is logged, but I've enabled magic SysRq and it makes no difference.) Twice this has occurred during yum-update's install stage, which is making me wonder. Uum-update then complained about an unfinished transaction, so I ran yum-complete-transaction as suggested. I've also tried yum-clean-all and rebuilding the RPM database, suggested in other threads, but I'm still seeing the following errors on yum-update:
--> Finished Dependency Resolution
Error: Protected multilib versions: 1:cups-libs-1.4.7-3.fc15.i686 != 1:cups-libs-1.4.6-15.fc15.x86_64
Error: Protected multilib versions: libuuid-2.19.1-1.3.fc15.i686 != libuuid-2.19.1-1.2.fc15.x86_64
Error: Protected multilib versions: krb5-libs-1.9.1-5.fc15.i686 != krb5-libs-1.9-7.fc15.x86_64
You could try using --skip-broken to work around the problem
** Found 23 pre-existing rpmdb problem(s), 'yum check' output follows:
1:NetworkManager-0.8.9997-5.git20110702.fc15.x86_64 is a duplicate with 1:NetworkManager-0.8.9997-4.git20110620.fc15.x86_64
1:NetworkManager-glib-0.8.9997-5.git20110702.fc15.x86_64 is a duplicate with 1:NetworkManager-glib-0.8.9997-4.git20110620.fc15.x86_64
1:cups-libs-1.4.7-3.fc15.x86_64 is a duplicate with 1:cups-libs-1.4.6-15.fc15.x86_64
ibus-1.3.99.20110419-9.fc15.x86_64 is a duplicate with ibus-1.3.99.20110419-7.fc15.x86_64+ More errors of that ilk.
I don't know where these 32-bit packages have come from this is an x86-64 system and the only x86-32 stuff I've intended to install is the Adobe flash plug-in. Also the later dupes are different 64-bit versions. I've tried "package-cleanup --cleandupes" as suggested in this thread: [URL]. It wants to remove the old versions, but also wants to remove packages that depend on them, including clutter, so I cancelled that. The first time round I was left with a barely usable system and had to reinstall, which I'd rather avoid, especially if this is going to be a regular occurrence. I'm not familiar with RPM (or kernel panics for that matter).
View 1 Replies
View Related
Mar 18, 2011
I was using the Slack 13.1, and when I change the mirror to Current and upgrade (and reboot after this) my Slackware stops in the Message "Loading Linux" and makes a million of beeps.
View 3 Replies
View Related
Mar 8, 2011
after running an upgrade chromium browser shockwave flash plugin crashed! if you have the same problem i have a workaround. firstly open firefox goto a website that uses flash (not videos) i used bbc iplayer, then right click and click on "settings..." the left most tab shows the "enable hardware acceleration" tickbox. untick it
then close and reopen chromium and go back to a flash site e.g. videos and test it is working. the reason this worked for me is that there is a bug in either googles chromium or the unix/x11 build of shockwave flash or my graphics card drivers. there seems to sevral bug reports regarding this on the net [url]. flash could be a little slower now it doesn't have the hardware accelerating it. so maybe the setting could be re-enabled in the future?
View 9 Replies
View Related
May 3, 2011
I tried to update my main computer from Ubuntu 10.0 to 11.04. I wish I could remember what it said, but it crashed during the update. The lights on the keyboard were flashing on and off as well. When I try to boot, all I get is a black screen and flashing lights. The Ubuntu recover also has the same thing. I am going to try a fresh install. For some reason I am leaning to the power manager, but I am no where near sure.
View 2 Replies
View Related
May 4, 2011
I am having a lot of trouble with my computer... tried to upgrade to Ubuntu 11.04 on my computer, but the update crashed and then the keyboards lights just kept blinking. So I thought okay, I will try A fresh install. So I plugged up my old dinosaur and made a new boot cd. When I try to boot it, it shows that it is loading. But then the screen will go crazy, it will be a bunch of mashed boxes with funy colors sort off.can not get any responce out of it. So I try the boot cd in my old computer and everything works great.My computer specsare(custom):Motherboard = msi 785gm-e51 / 760gm-e51Cpu = AMD Phenom 2 duel core, running around 3.7 GHzRam = 2 gigs of ddr3Video card = GT240 galaxy...Geforce 200 series...An old wimpy 80 gig hardrive..Any ideas, I really like Ubuntu and usally have no problem that I can not Google myself out of but this time I can not find what I need.
View 1 Replies
View Related
Jan 23, 2011
I updated squeeze last night for the first time. It worked fine after 1st reboot last night. There was one reboot stalled at "hald" so I shut down and restarted. Worked ok 2nd time around
Today,upon login I got a string of taskbar notification (which I couldnt read as they all overlapped . I was able to see a kernel error message but couldnt report it (network was down) or save it (USB stick not recognised) Some programs worked, others didnt
I have the partedmagic rescue distro on USB stick so have those programs to use in order to fix the problem. Any idea how I can repair this? I tried fdisk for the hell of it. reported clean partition as predicted. I am using debian-testing-amd64-kde.
View 3 Replies
View Related
Mar 13, 2009
I updated fedora 10 a few days ago, by blindly installing every update available, and when i restarted, my nvidia drivers weren't loading, and I'm having an issue I had before, where the signal being sent to the monitor is out of frequency range. Basically when fedora tries to load its GUI, my monitor just goes blank. Before I could only fix it by plugging in a different (less tempermental) monitor, and messing around with the display driver.
I was wondering if there is a way to mess with the drivers from the command line. I really don't like switching out monitors, and i want to learn the skillz and such.
View 4 Replies
View Related
May 8, 2010
So I attempted to Upgrade 2 days ago from 9.10 to 10.04. I started the upgrade and left my computer alone as it said it would take several hours. When I returned to check on it, It told me the the installation had failed and it was attempting to roll back to the previous installation. Afterward I couldn't access anything on my computer. I'd click a icon and it wouldn't do anything. I manually restarted it and was greeted with a message that it couldn't boot because there was no mount specified.
Since I had backed up all my files I tried to just reinstall ubuntu. However even after I reinstalled I'm greeted with the same message.
View 1 Replies
View Related
Apr 8, 2011
This is a Natty system. I ran update manager to update to the latest releases for Natty, and it crashed. I ran it again and it told me it could only do a partial upgrade, and that I should do apt-get install -f. I did that, but apt-get told me the system was locked by another program. Not to worry I thought, I'll just reboot. So I did that, and I think Update-Manager got a lot further through the process than I thought, because my system is borked. It'll boot into Gnome, but when booting up the Boot Screen no longer shows the pretty Ubuntu Logo, but rather a line of text that says "Ubuntu 11.04".
When it gets into Gnome the keyboard and mouse more or less don't work (although the keyboard based Fn+9 and Fn+10 brightness control still works) and there is no desktop background. After about 30 seconds something crashes but I can't click on it to find out what. Going into the recovery console doesn't help either. The latest Kernel (2.6.38-7) stops moving forwards after "Begin:Running /scripts/init-bottom...done". has occurred for the second time. Luckily I still have the previous kernel, which gets to the same spot and then tells me:
"init: udevtrigger main process (390) terminated with status 1" and then "init: udevtrigger post-stop process (394) terminated with status 1".
I then get the message
"The disc drive for / is not ready yet or not present. Continue to wait; or Press S to skip mounting or M for manual recovery". S goes back to "Begin:Running /scripts/init-bottom...done" a second time, M brings up the message:
"Root filesystem check failed. A maintenance shell will now be started"
and then it asks for the root password and gives me a terminal. Everything seems to be there, but apt-get and dpkg both can't do anything as the filesystem is read only.
View 9 Replies
View Related
Dec 17, 2010
I'm running 10.3, KDE, 32bit. I am working with a fresh install. The updater stated that I had updates , I accepted the updates. At this point the updater failed in some way. It did not become a zombi but stalled. I quit the updater. Now when I try and get online updates using the sys tray updater it sais none available. When I use yast online update it has some recommended updates but does not install them. I rebuilt the rpm data base and this did not help.
How can I "reset" the updater. I believe that it thinks that it did go thru the updates and therefor cant see that they still need attention.
View 3 Replies
View Related
Jan 16, 2010
I have just replaced my decaying XP OS with Ubuntu just yesterday evening. Everything has been fine until today at around noontime, where the OS just crashed. I have not been able to boot up the OS ever since, neither from the HD or the LiveDisc which I have installed from. I had updatemanager, that IM program (I'm new to the system, I don't know what its called and Firefox open at the time. I have 32 bit ubuntu installed on a 32 bit computer, unpartitioned HD
View 2 Replies
View Related
Sep 1, 2011
I am writing this from a LiveDVD of 11.04. My machine, which is an Inspiron1501 with AMD64 dualcore crashed while running a working copy of 10.04LTS 32bit. At first Harddrived seemed unrecoverable, but not that may not be the case if I can mount it. HD is partitioned as 1 FAT which holds the OEM installer1 NTFS with a sub/ virtual NTFS (not as a file, but as a "partition", only readable from WinXX) 1 Linux Swap 1 Linux Extention 3 (I believe it is 3, as in EXT FS 3) Machine initially displayed:
Code:
[ 2.736258] Console: switching to colour frame buffer device 160x50
No init found. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)_
After following some advice, I booted into Win and shutdown cleanly. Which has made the machine only say this on boot:
Code:
No init found. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)_
Now, to make things a little more complicated, my home directory is encrypted. Could I just copy that over to a new install provided I can get it to mount?
View 3 Replies
View Related
Jul 15, 2010
I have just downloaded version 10.04 for my laptop as the previous version (9.?) stopped the internal fan from working. As it was installing the laptop got too hot and turned itself off. I have tryed to reboot but it won't.
View 4 Replies
View Related
Oct 14, 2010
I was upgrading from 10.04 to 10.10 and the computer completely froze and I restarted it thinking I would be able to restart the update where I left off (I'm new to ubuntu). However when I restart I can't get anywhere, if I boot normally the ubuntu screen comes up and then it stops with the computer name in the middle of the screen and thats it (can't do anything i can't get into shell via ctrl-alt-f1 etc..) if i use the recovery from the grub menu it loads a bunch of things then stops i can't type anything but I can switch using ctrl-alt-f1 and ctrl-alt-f7 but I don't see anything except:
under ctrl-alt-f1 the last line reads:
[2.711773] composite sync not supported
under ctrl-alt-f7: the last lines read
fsck from util-linux-ng 2.17.2
init: udevtrigger main process (421) terminated with status 1
[code]....
View 6 Replies
View Related
Oct 16, 2010
My filesystem crashed/corrupted. When i start my machine i see the following messageTarget filesystem doesn't have /sbin/init.No init fount. Try passing init= bootarg.BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu7) built in shell (ash)Enter 'help' for a list of build in commandsAfter googleing, found that i need ti run fsck on my partition (/dev/sda5)I used a Livecd and logged in the single user mode and tryedfsck /dev/sda5But i get fsck.ext4: Device or source busy while trying to open /dev/sda5Filesystem mounted or opened exclusively by another program?When i do lsof | grep sda5I see
jbd2/sda5 594 root cwd dir 0,17 280 2/
jbd2/sda5 594 root rtd dir 0,17 280 2/
jbd2/sda5 594 root txt unkown /proc/594/exe
[code]....
View 4 Replies
View Related
Feb 12, 2011
today my desktop crashed due to power failure. When i again started the machine and tried to boot Ubuntu i m getting the following message in command screen:- "Minimal BASH-Like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists is possible device & file completions."
View 7 Replies
View Related
Jun 21, 2011
I installed F15 a couple days ago without much difficulty (and upgraded the kernel to the most recent, along with all the accompanying applications). However, I wanted to enhance my experience with the terminals, etc. So, today, I installed a gnome-3 advanced tweak or something along those lines (I forget the exact name already). This is software that is supposed to allow us to specify user-defined shells (not active yet), modify the terminal bars, etc. After installation, a menu bar came up, which allowed me to run the application. I ran it and it crashed.
Then I went to the applications section and started that job again and the whole system just froze, showing just a rotating wheel (as if a process is in progress). Nothing worked. So, I manually shut the system down and turned it back on again; and all I saw was that turning wheel and a small half-inch by half-inch square box (with just noisy colors). I then inserted my F15 installation DVD (the same DVD I used to install my OS), and started the machine; and the response is exactly the same as before: just that turning wheel with the noisy small square box. When I move my mouse around the wheel moves about in response. But, the system is just frozen.
View 2 Replies
View Related
Apr 29, 2011
I have a centos 5.2 machine that seems to have a problem with xwin. upon a reboot it complains that gnome has crashed. my desktop bckground is 'there' my desktop resolution seems to have changed( maybe it was 1024 x 768 -- now 800x600??? )the toolbars that were across the bottom of the screen that held shortcuts to programs and things is now blank -- empty.what might i be able to do? also when i tried to update i get complaints about missing dependencies.
View 3 Replies
View Related
Nov 13, 2010
I have a little problem here. I tried to copy include directory from g++ to a place where it suppose to be and when i couldn't because of the rights i wrote something like this in the bash:
Code:
Code:
cause i hate when I can't do what I want without tiping command
After few minutes all daemons crashed and now I can't boot normally
in console i've tried
Code:
And that stopped on /prc/756 directory
Well now i can boot normally but most of programs are not working, i can't get to the internet? and it looks like there is no way to become a root cause there is no sudo/
Can i reinstall ubuntu and keep all packages and files on its places?
View 9 Replies
View Related
Dec 8, 2010
I have a desktop computer running Linux Mint 9 with the Gnome desktop (not sure what version -- though by default Mint 9 comes with Gnome 2.30). Last night I tried adding a panel to the desktop by right-clicking on the existing bottom panel and selecting "New Panel". Please note that I've already got another panel at the top of the desktop on the left side on autohide and no expand.
When I added another panel, it placed a normal panel on the right side of the screen without any problems. When I right-clicked on the new right-side panel and selected "Properties", I changed the orientation to "top" (where there was already a panel, if you remember). After that moment, it seemed like the entire desktop environment crashed. Everything was completely unresponsive -- the only thing moving on the screen was the mouse. I couldn't do anything with the gui, not even shut the computer down.
Since the gui shutdown wasn't working, I switched to a different tty screen, logged in, and ran a shutdown command with the option to reboot. The computer shut down fine, and when it woke back up, the same problem was still there: Nothing loaded on the screen except for the background image and the mouse, which was still able to move but nothing else. I have the computer set up to automatically log me in, so I know it's not crashing before the user prefs are being loaded...
After restarting it again and getting the same result, I switched to a different tty screen, logged in, and tried messing around with stuff to no avail. I did notice, however, that the computer was becoming evermore sluggish, and something printed on the screen stating that a program had been terminated because of "not enough memory". It seemed like some process was consuming WAY too much RAM by itself or a program was accidentally forkbombing the computer. ...All because I added a panel...?
View 2 Replies
View Related
Apr 29, 2010
I am having a Ubuntu nightmare. I am relatively new to the whole Linux thing. I just updated my Ubuntu from the update manager today and after I restarted I keep getting the following error: Error: You need to load kernel first.
My boot menu shows the following:
GNU Grub version: 1.97~Beta4
Ubuntu, Linux 2.6.31-21-generic
Ubuntu, Linux 2.6.31-21-generic (recovery mode)
Ubuntu, Linux 2.6.31-20-generic
Ubuntu, Linux 2.6.31-20-generic (recovery mode)
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)
Windows 7 (loader) (on dev/sda1)
The only two that work are the last two. So I chose Ubuntu, Linux 2.6.31-14-generic and booted normally. From there I typed actionparsnip's suggested solution (which worked for other people on other versions): sudo apt-get clean; sudo apt-get --reinstall install linux-image-2.6.31-21-generic As you see I suited actionparsnip's solution to my version. The command downloaded something and made some fixes/updates and everything and seemed to have worked fine.
The system asked me to reboot, and here I am stuck: Now the boot menue shows the grup prompt which seems like: Minimal BASH-like line editing supported... sh:grub> NOTES: I originally installed Ubuntu alongside Windows 7 using Wubi. I can paste the contents "wubildr.cfg" if this helps. I had to go back to my Windows 7 to post this.
View 7 Replies
View Related
Jun 7, 2010
I wanted to know the solution that if my linux crashes then can I recover my windows in adual boot env.
View 6 Replies
View Related
