I have just downloaded version 10.04 for my laptop as the previous version (9.?) stopped the internal fan from working. As it was installing the laptop got too hot and turned itself off. I have tryed to reboot but it won't.
View 4 Replies
I am writing this from a LiveDVD of 11.04. My machine, which is an Inspiron1501 with AMD64 dualcore crashed while running a working copy of 10.04LTS 32bit. At first Harddrived seemed unrecoverable, but not that may not be the case if I can mount it. HD is partitioned as 1 FAT which holds the OEM installer1 NTFS with a sub/ virtual NTFS (not as a file, but as a "partition", only readable from WinXX) 1 Linux Swap 1 Linux Extention 3 (I believe it is 3, as in EXT FS 3) Machine initially displayed:
Code:
[ 2.736258] Console: switching to colour frame buffer device 160x50
No init found. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)_
After following some advice, I booted into Win and shutdown cleanly. Which has made the machine only say this on boot:
Code:
No init found. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)_
Now, to make things a little more complicated, my home directory is encrypted. Could I just copy that over to a new install provided I can get it to mount?
I installed F15 a couple days ago without much difficulty (and upgraded the kernel to the most recent, along with all the accompanying applications). However, I wanted to enhance my experience with the terminals, etc. So, today, I installed a gnome-3 advanced tweak or something along those lines (I forget the exact name already). This is software that is supposed to allow us to specify user-defined shells (not active yet), modify the terminal bars, etc. After installation, a menu bar came up, which allowed me to run the application. I ran it and it crashed.
Then I went to the applications section and started that job again and the whole system just froze, showing just a rotating wheel (as if a process is in progress). Nothing worked. So, I manually shut the system down and turned it back on again; and all I saw was that turning wheel and a small half-inch by half-inch square box (with just noisy colors). I then inserted my F15 installation DVD (the same DVD I used to install my OS), and started the machine; and the response is exactly the same as before: just that turning wheel with the noisy small square box. When I move my mouse around the wheel moves about in response. But, the system is just frozen.
I was upgrading from 10.04 to 10.10 and the computer completely froze and I restarted it thinking I would be able to restart the update where I left off (I'm new to ubuntu). However when I restart I can't get anywhere, if I boot normally the ubuntu screen comes up and then it stops with the computer name in the middle of the screen and thats it (can't do anything i can't get into shell via ctrl-alt-f1 etc..) if i use the recovery from the grub menu it loads a bunch of things then stops i can't type anything but I can switch using ctrl-alt-f1 and ctrl-alt-f7 but I don't see anything except:
under ctrl-alt-f1 the last line reads:
[2.711773] composite sync not supported
under ctrl-alt-f7: the last lines read
fsck from util-linux-ng 2.17.2
init: udevtrigger main process (421) terminated with status 1
[code]....
I am using Ubuntu 9.10 on a Sony viao laptop. (not right now 'cause it won't start up). I've been tring to turn it on all evening with no luck. I turn the power on. The first bios screen show the read out and then the Ubuntu icon shows on black screen and then the screen goes black. At that last stage I would have expected to see the brown Ubuntu screen and then the log in screen but it doesn't show up.
Is my hard drive damaged from being shaken around? I carry my laptop in a backpack designed for that and place in my car trunk (carefuly, I don't throw it around like a ball) If the hard drive is damaged, the way do I see the first black Ubuntu srceen on start up? Does Ubuntu burn that on to the bois? I tried starting up from an Ubuntu instalation CD and a Puppy CD and got the excat same results as listed above.
I installed fedora 12 as second os along with ulimtate vista on 64 bit machine.
I was able finish the install and boot to fedora first time. but after updating the software , i am unable to boot into fedora but am able to boot in to vista.
I am using a HP Pavilion HDX9000 notebook series. it has 2 100gb hdd. vista is on c and fedora is on d. boot info was written to MBR on C drive.
When I updated Linux it crashed in the middle of the update. I think there was not enough disk space. I had a windows dual boot and tried to make the Linux partition larger but in doing that a crashed grub and can't use Linux or Windows. I tried super grub but it didn't work so I tried to fix the partitions with gparted live cd. It my disk just showed up as empty. I formatted it and re installed debian but it didn't work. I can see partitions but my computer won't boot.
View 1 Replies View RelatedOne of my disks in my computer crashed, it was the one containing /boot and some data partitions. The other system and /home partitions were on a second disk, which is ok.
I was wondering, can I create a new /boot partition, and keep on using the rest of the system? Can I somehow do it with a chroot from a live/installer disk, run grub, and use my system again? I have another disk which I can put in the system, but there is even an unused partition on the disk which is ok (but it is rather big for /boot).
I am having on trying to backup my crashed laptop with ubuntu 9.10 when i double click on my hard drive, it says "unable to mount location" and it says "unable to mount location" a job is pending on /dev/sda2 when i right click on my hard drive and select mount.
View 2 Replies View Relatedi'v recently downloaded a torrent file which happened to be a fake movie. it gave me a message stating i need coreplayer to run it and directed me to [URL].the file was an obvious fake because it had the yahoo! logo on it, but right after running it my laptop slowed down to snail-turtle speed and i had to reboot it.as i said i'm not sure whether this is a bug or a security-related threat, i should be fine by just deleting the said file, correct?
View 9 Replies View RelatedFedora 12 randomly crashes after a fresh install.Everything is left at its default during the installation except I install KDE and not Gnome.When I try to boot I hit esc at the splash screen to see where it hangs, but it never hangs at the same spot twice. Sometimes it hangs and sometimes it restarts. Its crashed everywhere from starting udev to the login screen.
I've been using kubuntu for the past year because I have the same problem with F10 and F11.
I dual boot with Windows 7 for games.
System specs:
Motherboard: MSI P45 Platinum
Processor: Intel Core 2 Duo E8500
Video Card: Radeon HD4850
Memory: 4GB (2x2GB) Patriot
HDD: Main: 250GB SATA Western Digital
code....
I have a Toshiba laptop with windows 7. I installed wubi and all worked fine until I ran some ubuntu updates. Now the computer will not boot, what comes up is error: no such device: f53e513e-bfa0-4126-ab5c-8f7777505812. grub rescue> Is returns unknown command set returns prefix=(hd0)/boot/grub root=hd0
View 2 Replies View RelatedI have a problem. Today I updated from 10.10 to 11.04 and it looks really cool. However, I also have Windows 7 on a different partition. When I restarted after I updated, GRUB looked different. Also, when I tried to boot to Windows 7, the screen would go blank (like it was restarting) and it would just bring me up to the GRUB menu again. I really need to get back onto Windows 7.
View 7 Replies View RelatedI was using dual boot (windows 7 and ubuntu 10.10) and it was going well. Couple of days ago I updated to Ubuntu 11.04 and everything was OK. Yesterday I cought some virus in windows, installed Microsoft security essentials which asked to update Windows. After update, dual boot is gone. It boots to windows directly with no option to choose between OS.
Quote:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
sda1: __________________________________________________ _______________________
File system: ntfs
[Code]....
I have Ubuntu dual booted on the laptop I'm on, with Windows 7. I'm currently running 10.10. Is it safe to update Ubuntu to the latest version, despite it being on a dual boot? I'm not sure how it would work, but I imagine it'd be fine...I just wanted to double check first.
View 2 Replies View RelatedI recently upgraded Fedora 9 to Fedora 10 on a triple boot system (Fedora 9, Win XP and Ubuntu 8.04). The upgrade seemed to run fine until rewriting the boot loader, which failed. The old Fedora 9 entries remained. The Fedora 10 installation is found by Supergrub but attempting to boot generates the error:
Error 15: File not found
Ok, so I just finished correcting my driver issue with my wireless card when I'm struck with another problem....after gaining access to the net and updating my packages, ubuntu fails to boot up. It freezes at the boot screen where it runs the 5 orange dots with the ubuntu logo.
View 1 Replies View RelatedI tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
I'm a complete an utter newbie on this forum, and indeed to linux/ubuntu in general so pardon me in advance if some of my question makes no sense/sounds silly/makes you want to exterminate all noobs. Basically, I've had bad experiences (i.e. had to use my recovery system) trying to install a dual boot system with OpenSuse and want to get some sound advice before I proceed with installing Ubuntu, instead of having to go through the agony of formatting and recovering Vista HP again, and consequently trying to teach it all over again how to suck less.
Okay, so less waffle and more questioning. Background information is that the laptop is a Compaq F560. It has at present Win Vista 32 HP on the primary partition (C), with a recovery partition on (D). It has a very basic, almost un-alterable BIOS, 1.5Gb of RAM, 120Gb HD, standard CD rom, integral nVidia 6100m graphics card, a broadcom wireless network adaptor and various other bits n' bobs.
When installing OpenSuse last time I found 2 huge flaws with my method. First one is, that I didn't have wired networking available to me at the time, and foolishly forgot to get hold of the wireless adaptor drivers before installing Suse. No biggy you say, just go back to windows and download from there. Great, except I'd bozzed up the MBR too, so couldn't do that. Suse, for it's part, ran fine. Very smooth. I just couldn't do anything with it.
What I'm now looking to do, is give Ubuntu a shot, as part of a dual boot system, with Vista on the other half. I want to make vista the default boot system. I DONT want to have to go through my compaq's recovery system again, if possible. To meet these objectives, Ultimately, I'd like to transfer all of my operations across to Ubuntu, but I'm too windows-dependent at the moment, though some sort of windows-emulator wouldn't be a bad idea if anyone knows where/how/what.
I have been working on this for 2 days and I am ready give this one up!! I have an old 'hp omnibook 6000' It's an Intel mother board. I believe it has 4 or 5 GB hard drive. 512 RAM, put that in myself. I can load live-cd's and all is good. I have tried: Xubuntu-alternate 7.04 and the desktop cd. Puppy Linux loaded up ok and all was working. Dam Small Linux loaded ok. Each time I reboot after install of mentioned os, all I get is a flashing cursor upon reboot. I know each one installed as gparted has shown me. When I install I 'erase and use entire disk'.
View 2 Replies View RelatedI just recently bought a Toshiba L505-ES5033 and can not get ubuntu (or fedora 12 32 or 64) to boot from the live cd, or install. I can get to the initial menu that asks me if I want to try without changes and all that but from that point nothing really. If I choose any options other than the help option it runs through some scripts and gives me an error. The error refuses to stay on the screen despite my constant demands that it does; all I THINK I can make out is MIRR... configuration error. Fedora tells me something entirely different. After this error it goes to a faded black screen and I can hear my HDD making angry sounds.
View 1 Replies View RelatedSince my wife just bought a new laptop I decided to polish her old (decrepit) machine a little and let my daughter have it. It was dual partitioned XP and Ubuntu 8.04 (which worked flawlessly). I figured that since it was older I'd load Xubuntu. I made a DVD of Xubuntu 10.04 that passed checksum. When I tried to boot from the DVD I got as far as the menu asking me if I wanted to boot from the DVD, install from the DVD, etc. Whatever I picked the machine seemed to think a while, then hang on a black screen.
So, I got an Ubuntu 10.04 CD from a book I'd just bought, and tried that. It behaved identically- after the option menu whether I tried to boot from CD or install, it hung on a black screen. So, I booted 8.04, and fired up the Update Manager, and loaded all recommended updates (as is generally my habit). Then I clicked the button to update to 10.04, all of which progressed as expected over the course of a few hours, until the reboot. At this point it did the same thing! GRUB loads, and I pick Ubuntu 10.04, then I get the word "Ubuntu" in the middle of the screen with several dots under it (the boot splash?) for a split second, then it hangs on a black screen.
If I boot Ubuntu 10.04 in recovery mode that DOES seem to work, and I get a command prompt. But fixing this via command prompt is WAY beyond my weak Ubuntu kung-fu.
The machine is:
Averatec 1000 series
Intel Celeron (R)M 1.00GHz
504MB RAM
Intel(R) 82852/82855 GM/GME graphics controller
Which seems to meet minimum system requirements.
Oh, and XP SP3 boots just fine.
But I'd be happy if I could single-install some version of Ubuntu, and screw the dual-boot capability with XP, if that makes any difference.
I tested a month ago with my bro's PC and really liked it a lot. I downloaded 10.10 version from net. But i found out that my CD ROM drive is not able to read any CDs any more and my laptop doesn't have USB boot option. My laptop is a Pentium 4 with 1.5 GB RAM and is running Windows XP Professional SP 3. I have created 15 GB unallocated space for Ubuntu but don't know how to install in this situation.
View 2 Replies View RelatedLaptop HP G62-140US - BIOS Hewlette-Packard F.07, 10/2/2010.
Has Windows 7 Home 64 bit. Processor Intel i-3 2.1 GHz. Memory 4 GB. Hard disk 250 GB
Was not able to boot Ubuntu 9.04 from the DVD drive ('Broken Bios' error). Was able to boot Ubuntu 10.10 Seemed OK and so made a USB stick for booting.
This also worked on 2 occasions and after about a week cannot boot either from DVD drive or from USB stick. No upgradation of BIOS or Windows 7 was made.
Trying to boot from DVD drive got 'Broken Bios' error and with USB the error screen goes off too quickly and therefter the loading goes for ever.
I downloaded the disk ISO torrent and burned it to a DVD. I then ran the DVD and installed Ubuntu using the Windows installer. Upon rebooting, I get the boot menu asking which OS I want to start. I select Ubuntu and it goes to a countdown to hit ESC to select boot options. Once boot starts, I get a bunch of crap on the command lines and then it hangs. The entry it hangs on is something to do with? child-(several numbers I can't remember right now). I hope that is enough for someone to identify where it's hanging during boot. what is causing this? The computer is a Toshiba Satallite L505D-S5983. You can look up the specs for that. Processor is an AMD Athlon II M300 2.0Ghz, 32-bit, with 3GB RAM. Video is AMD M860G with ATI Mobility Radeon 4100. Primary OS is Windows 7. I'll see if I can find some paper and a pen to write down the particulars of the error. I usually use my computer for note-taking, but I obviously can't do that here.
View 9 Replies View RelatedI have a really old sony vaio and the disk drive does not work, it does not have the option to boot from usb so im kind of stuck. Is there any other way I can install unbuntu through windows xp?
[code]...
I've just acquired a Vaio PCG-FX801 with Phoenix bios version R0121K5.In the boot order, it lists "+Removable Devices", but on expanding the menu, only gives "Legacy Floppy Drives".I only discovered this after unsuccessfully trying to boot from a stick with the 10.10 netbook iso on it.Is it possible to get round this,or should I put the iso on a cd,or should I download the desktop iso onto a cd, and use that? I want to try it out on this laptop before installing it.
View 8 Replies View RelatedOn duel booting windows 7 and ubuntu on an hp laptop. All 4 partitions are taken up. I know i need to delete one partition to make room for ubuntu. Should I delete the windows recovery or hp partition? Or is there another option?
View 5 Replies View RelatedI'm currently having problems trying to install Ubuntu on my laptop.I have burnt off a CD that contains the latest Ubuntu 10.10 iso using the exact way the website tells me to.However, I can't boot from that CD. I can, however, boot from other CD's. For example i ran my Gparted Live CD to create a partition on my hard drive about an hour ago and that worked fine.
View 6 Replies View RelatedI have been using Ubuntu for years. I just bought a new laptop - HP Compaq 621. Hardware settings:
Processor: Intel(R) Core(TM)2 Duo CPU T6570 2.10GHz
Memory: 1GB
ROM Date & revision: 01/07/2011, 68PVI Ver. F.09
Video BIOS Revision: ATI 01/05/2011
I followed exactly what is described on Ubuntu [URL] Believe me, I burned image (not .iso data) to CD, but BIOS won't boot from the Ubuntu bootable CD. I also created a USB stick, again BIOS won't boot from the Ubuntu bootable USB (I selected to boot from USB first) stick. I tried with Desktop 10.10 32bit, 10.10 64bit, 10.04 32bit, and 10.04 64bit.
I also tried with my old Ubuntu Desktop 8.04 64bit bootable CD, which my very old Compaq Laptop installed. It allows me to see the menu. I selected "Safe mode" to install Ubuntu. But it gives me the error message: "udevd-event [1412] run_program /sbin/modprobe"
how I can install Ubuntu on my HP Compaq 621 Laptop?
