Ubuntu :: Touchpad Lost Vertical Scrolling 10:4?

Jul 13, 2011

For some freaky reason, my synaptics touchpad no longer supports vertical scrolling! No idea why, it worked fine yesterday.

View 3 Replies


ADVERTISEMENT

Debian Configuration :: Synaptic Tapping - Left Side Of The Touchpad Is Not Enabled For Vertical Scrolling

Dec 2, 2010

just installed debian squeeze KDE after years of ubuntu and suse.. For some reason, after I finally got both scrolling and tapping to work, I have a weird weird touchpad through my xorg.conf: - tapping on a tab in chrome closes the tab.

- tapping in a text field pastes txt that is in the clipboard, each successive click keeps pasting the same thing

- the left side of the touchpad is not enabled for vertical scrolling (?), and for some reason the directions are inverted (move finger up to scroll webpage down)

- when having multiple windows open, tapping that window will highlight it, but the previously selected window stays overtop of the now selected windows. Using the actual left click button the windows change normally.

View 3 Replies View Related

Ubuntu :: Turn Off Touchpad Scrolling For Changing Between Desktops?

Apr 24, 2011

Using Lubuntu 10.10 on a laptop with a Synaptics touchpad. Moving the finger along the right edge of the touchpad acts as a scroll wheel. If the cursor is not in any app window but is in open desktop area - then this scrolling action will transport one to a different desktop. I have two desktops enabled so by moving the the finger along the side up/down I go from Desktop1 to Desktop2 and back.

This deadly for me and causing much hair pulling. I am in the middle of doing something and desktop will change. No matter how careful I am this eventually happens. So for the sake of sanity I have only one desktop.I'd like multiple desktops but I need to turn-off this scrolling feature. I've seen some hacks in config files but they either don't work or have side effects. I want to keep the scrolling in windows were the touchpad scrolling really helps. I just want to turn-off the scrolling between desktops only

View 1 Replies View Related

Fedora Hardware :: No Tapping And Scrolling In Touchpad

Jun 20, 2011

I have a HCL K21 pdc notebook. When I install Fedora 15 KDE then there is no tapping and scrolling of touchpad. But the cursor is moving. It does not work in Live CD as well as in installaton. I have updated F15 to full but still no luck. Touchpad : Synaptics The buttons below the touchpad are working and all the options in system settings are enabled

Note : I have read a forum in which touchpad is detected as ps/2 mouse. So I tried to disable the ps/2 mouse but it disable the cursor movement of touchpad, so it may be some kind of problem!

View 13 Replies View Related

Fedora Hardware :: The Touchpad Scrolling Not Working?

Aug 29, 2011

i'm having a little bit of trouble with my touchpad, it is apparently recognized as a PS2 Mouse, so no edge scrolling obviously, i read through xorg-x11-drv-synaptics-1.4.0.901-1.fc15 (1686) description:

Code:

This is the Synaptics touchpad driver for the X.Org X server. The following touchpad models are supported:

* Synaptics
* appletouch (Post February 2005 and October 2005 Apple Aluminium Powerbooks)
* Elantech (EeePC)
* bcm5974 (Macbook Air (Jan 2008), Macbook Pro Penryn (Feb 2008), iPhone (2007), iPod Touch (2008)

Note that support for appletouch, elantech and bcm5974 requires the respective kernel module. A touchpad by default operates in compatibility mode by emulating a standard mouse. However, by using a dedicated driver, more advanced features of the touchpad become available.

Features:

Movement with adjustable, non-linear acceleration and speed. Button events through short touching of the touchpad ("tapping"). Double-Button events through double short touching of the touchpad. Dragging through short touching and holding down the finger on the touchpad. Middle and right button events on the upper and lower corner of the touchpad.Vertical scrolling (button four and five events) through moving the finger on the right side of the touchpad.

The up/down button sends button four/five events. Horizontal scrolling (button six and seven events) through moving the finger on the lower side of the touchpad. * The multi-buttons send button four/five events, and six/seven events for horizontal scrolling.Adjustable finger detection. Multifinger taps: two finger for middle button and three finger for right button events. (Needs hardware support. Not all models implement this feature.) Run-time configuration using shared memory. This means you can change parameter settings without restarting the X server. and it says that it requires specific kernel modules for the touchpad, otherwise it will be recognized as a normal mouse. Maybe I'm wrong but i think my problem fits in this state.

My notebook is a Dell N4030, Here are some outputs:

uname -a:

Code:

Linux alberto-dell 2.6.40.3-0.fc15.i686 #1 SMP Tue Aug 16 04:24:09 UTC 2011 i686 i686 i386 GNU/Linux
lspci:

Code:

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)

[code]....

View 14 Replies View Related

Ubuntu :: Samsung N150 Plus Touchpad - Make The Two Finger Scrolling Work Correctly?

May 17, 2011

I've just installed Ubuntu 11.04 on a Samsung N150 Plus for a relative who I've been trying to get to use Ubuntu for ages and want to get it as perfect as possible.I have everything working well except two finger scrolling on the touchpad it's quite buggy and skips about as I scroll with it.how to make the two finger scrolling work correctly?

View 3 Replies View Related

OpenSUSE Install :: 11.2 Touchpad - Starts Scrolling Unexpectedly After Adjust Speed

Feb 16, 2010

I am having a problem with my touch-pad on my Dell Inspiron 1525. It needs to be adjusted for speed and it starts scrolling unexpectedly. I understand I need to install a driver for it but don't know how. The problem I see with Linux is that it's not easy to install software for new users. I have ran into a few One click Installs and managed to work them out quite easily. Usually the documentation you find online to install programs assumes the end user knows how to install.I need to know how to install the touch-pad driver from start to finish and all steps in between.

View 2 Replies View Related

Ubuntu / Apple :: Reverse Scrolling And Inertial Scrolling?

Dec 1, 2010

I've just recently put Ubuntu on my 2010 Macbook Pro 13 inch, and all seems to be running more or less alright.One thing i miss from OS X is the ability to reverse the scrolling direction, also inertial scrolling.Is there any way to implement this in Ubuntu?Also, i have already installed the Mactel trackpad drivers.

View 2 Replies View Related

Ubuntu :: Touchpad Stops Working After Pressing The Touchpad Toggle Button

May 7, 2010

I am running Ubuntu 10.04 Lucid Lynx LTS. My laptop is an HP Pavilion TX1210AU (TX1000 series). After disabling the touchpad using the toggle button and reenabling it again, it stopped working. I tried restarting my laptop and the mouse worked again only up to the Login Screen. After logging in to my account, the mouse froze again. I tried making a new account and tried logging into it (I'm using it now) and it's now fixed. Does Ubuntu change any user settings everytime the touchpad toggle (on/off) button is switched? Maybe I could just reenable it myself.

View 2 Replies View Related

Hardware :: Installed Synaptics Touchpad Drivers , But Ubuntu Cannot Find The Touchpad?

Apr 22, 2010

I have installed synaptics touchpad drivers , but ubuntu cannot find the touchpad.

View 1 Replies View Related

Red Hat / Fedora :: Cant Get Touchpad To Work On Wirelss Keyboard/touchpad

Aug 27, 2010

I couldn't find a place to post Cent OS questions so don't bite if this is in the wrong place

I have a KeySonic 2.4Ghz Wireless Keyboard with Integrated TouchPad which I am trying to get to work.

Now there are some reviews saying it works straight out the box on Linux. This was almost the case for me.

The keyboard works straight away but the touch pad doesn't work at all not even the mouse buttons

I am running CentOS release 5.3 (Final) Kernel 2.6.18-128.el5

I would really appreciate any advice at all, I have checked the output of: cat /proc/bus/input/devices

Which gives:

Code:

View 5 Replies View Related

Ubuntu :: Vertical Bar Key Produces < And >

Feb 3, 2010

I have an Asus G51 laptop and for some reason the vertical bar/backslash button produces the greater than/less than symbol (<<>>) instead of the vertical bar. I was wondering what the command is for changing a character that the key produces.

View 3 Replies View Related

Ubuntu :: Splash Screen With Vertical Bars

May 6, 2010

I'm still getting some vertical lines through my splash screen, they are just a little darker purple than the rest of the screen, but disappear over the ubuntu logo/text/dots. I've tried the following from the faq, which made the screen at least show up, which is wasn't doing before.

Bootup/Plymouth.
Users should experience a much faster boot however some users may experience problems with Plymouth after the nVidia graphics driver has been enabled. Users may experience plymouth using lower graphics resolution. [URL]

Graphical solution : [URL]

Command line :
(Some of the fixes put forward dont work for everyone.)
One that works for nVidia and to try is this.
Code:
gksu gedit /etc/default/grub
and add the line in BOLD.
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
GRUB_GFXPAYLOAD_LINUX=1680x1050 Save the file and run
Code:
sudo update-grub
The resolution chosen should be your monitors native resolution.

Other graphics card users may get a black screen with flashing cursor and then a very short duration plymouth. [URL]. One fix for this is to create this file.
Code:
gksu gedit /etc/initramfs-tools/conf.d/splash
and add this option FRAMEBUFFER=y, save the file.
Then
Code:
sudo update-initramfs -u

View 1 Replies View Related

Software :: Vertical Task Bar

Feb 6, 2010

First off, I'd like to thank all the people on these forums. Gotten a lot of help and answers from reading these forums.So I've been trying for what seems like forever to get a decent vertical task bar. So far, KDE seems to be the only thing that manages to get it close, but I don't want to be restricted to KDE to have a desktop that works the way I want it to.I've also tried some dock apps, and while they look nice, I'm not really liking them.

Here's basically what I'm looking for:shows a nice vertical list with a small icon followed by the name of the window.keeps windows from the same application next to each other (but doesn't group them all into one keeps everything reasonably sized; doesn't make a single window take up all the available vertical space support some kind of window notification flashing (ex. an IM window flashing when you get a new message)

View 4 Replies View Related

Ubuntu Installation :: Vertical Screen Wrap After Upgrading To 10.04 LTS?

Jun 24, 2010

I am seeing the Vertical screen wrap problem (discussed in [URL]) on a 64-bit Athlon XP desktop with the Ubuntu version that I installed yesterday (10.04 LTS 32-bit).

Vertical screen wrap, with the mouse pointer offset by a few pixels to the north, taskbar partially visible .

The xserver video amd package version is, xserver-xorg-video-amd 2.11.8-4 and the geode package is, xserver-xorg-video-geode 2.11.8-4. Is it possible that the problem lies in the new geode package (and not the intel/amd driver) ?

View 1 Replies View Related

Ubuntu :: 2nd Screen Too Stretched - Get The Vertical Height Corrected?

Nov 13, 2010

The screen info says it is 1280*1024*60Hz.I put this into the nouvou monitors hardware control centre. The screen is too stretched in the vertical. Some icons are cut off at the top.The screen is a V7 videoseven.For some reason the menu controls on the screen only work on the non screen movement icons. I cannot access them .how to get the vertical height corrected? If I have I will go back to the NV proprietary drivers but I would prefer not to do so.

View 2 Replies View Related

Ubuntu Multimedia :: Vertical Purple Line On Screen?

Dec 1, 2010

Since yesterday a constant purple vertical line has appeared on my screen, positioned about 3/4 from the left, which remains even after I reboot.I'm running Ubuntu 10.10 on an Apple iMac (Intel), single boot Ubuntu.

View 8 Replies View Related

Ubuntu :: Horizontal Scroll Does Not Work (two Finger) But Vertical Does

Jan 20, 2011

I have gpointing devices 1-4 installed on ubuntu 10.10. The vertical and horizontal scrol both used to work. I have the latest 1.1.1 dkms synaptics driver posted in that bug forum. But now the horizontal scroll using two fingers does not work at all. I have it checked under mouse settings AND in gpointing devices. Is this a known bug?

Apparently I can't delete this. It has been solved. Smooth scrolling in Chrome kills horizontal scrolling

View 1 Replies View Related

Ubuntu Installation :: After Upgrading Vertical Lines Appear At Login?

Apr 3, 2011

I upgraded ubuntu from 10.04 to 10.10 and after upgrading at login screen nothing shows up only white lines. When i was upgrading to 10.10 a message appeared on screen regarding failure to remove fglrx. I wonder if this is the issue. I can still login using the old version but cant go to updated ubuntu

View 1 Replies View Related

Ubuntu :: LibreOffice/Openoffice Vertical Printing Offset By ~2cm?

Apr 9, 2011

I am using LibreOffice 3.3.2 Final on a 10.10 Ubuntu Laptop.Everything I print from LibreOffice and Openoffice is printed ~2 cm too high. Printing from other programs as Document Viewer and GIMP is just fine. It's not a settings problem, Ive checked everything hundred times. I am printing on HP Deskjet connected to a wireless router with CUPS 1.4.4 Driver.

View 1 Replies View Related

Ubuntu :: Remove Vertical Dotted Handles On Gnome / Panel

May 10, 2010

I've been wondering how to remove the two small vertical dotted lines in the panel. [URL] My apologies if this has already been addressed; I couldn't see anything.

View 8 Replies View Related

Ubuntu :: Compiz Cube Disables Vertical Viewport Switching

May 13, 2010

I have sixteen workspacess arranged in a 4x4 square. When the Compiz desktop cube is enabled, I can only switch between four of them on a row. All keys that would otherwise allow me to switch up and down between rows are disabled, even the ones I set outside of Compiz.

What is worst is that even the Window switchers are unable to change the current row I am on. If I use the Ring, Shift or Static switchers' "All Workspaces" modes, I can see the windows on all sixteen workspaces - but trying to switch to a window that is above or below the row I am currently on will only rotate around to the correct workspace's column, but not actually bring up the workspace the window is on. To navigate between all workspaces, I have to use the "Expose" feature.

Is there any way I can have a cube for horizontal navigation, but keep ordinary vertical navigation?

View 1 Replies View Related

Ubuntu :: Locked Screen Flashes Between Vertical Bars And Terminal

May 14, 2010

Ubuntu 9.04 works fine, I have just installed Ubuntu 10.04 Lucid Lynx without problems, it runs fine but after a while the screen starts flashing and the only way out is to reboot with ctrl-alt-del. First of all I get a pale purple screen with blocks of random colour in the middle then it goes on to flashing between two screens. In one the top half of the screen is vertical black and white stripes and the bottom half is black, in the other it is a terminal screen with this distributed across it:

Starting common Unix printing system cupsed
Pulse Audio configured for per-user-sessions
Enabling additional executable binary formats binfmt support
Checking battery state

On the latest occasion the text was "could not write bytes: Broken pipe" repeated all over the screen, followed by "checking battery state".

View 7 Replies View Related

Debian Multimedia :: Set A Non Standard Vertical Refresh Of A Crt?

May 8, 2010

I'm trying to enable a non standad vertical refresh rate of my crt in squeeze/gnome under the radeon driver, which does work under lenny and fglrx out of the box without any additional manual configuration. I already tried adding the VertRefresh option to xorg.conf under the Monitor Section, but that didn't worked out so far. One strange thing is that if i look into the Xorg log file i can see a line which sais as if the driver can see the possible refresh rates, but still in gnome i cant set those refresh rates to be active

# /var/log/Xorg.0.log|less
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 85 kHz, PixClock max 180 MHz

These are probably only the rates which my crt can handle, but still im unable to set 1024x768x100Hz because the max i get is 85Hz for that resolution.

View 1 Replies View Related

Software :: Reverse Vertical Tabulation With Minicom?

Jun 13, 2011

is there a way to move the cursor upward in Minicom when connected to another machine ?

I have an embedded system connected to the PC via null-modem. The embedded machine is to "redraw" the screen on the PC every second. Right now it sends the Form Feed command (0Ch) and sends the screen data down to the end of the page. The flow in detail as seen from the embedded sytem:

1) send FF (0Ch)
2) send text "blah blah one two and so on .."
3) goto step 1

This approach works but the minicom screen on the PC flickers due to the Form Feed command. So I need to find a way to move the cursor up (like a reverse vertical tabulation) to the upper left corner of the screen without using the Form Feed command. In a HOWTO I found something like "vertical coupling" that may be used for such cases, but no more hints than that.

View 2 Replies View Related

Ubuntu :: Positioning Screens - Xorg.conf - Vertical Monitor Cursor?

May 23, 2010

Just a day ago I did a clean install of 10.04, after wiping the disk clean of 9.10. So far everything's working great. Except for my old dual-screen configuration. A year or two ago I badly wanted to have 2 monitors, where both would share the same desktop/workspace allowing me to drag windows back and forth between the two. After a lot of research, I finally was able to put together (although a probably quite sloppy) xorg.conf file that did the trick for me.

My case is somewhat unique in that my left monitor is horizontal, while my right monitor is rotated 90 degrees, and is vertical. In 10.04, my old xorg.conf file sort of works, but I have problems on my right, vertical screen:

- when I move my cursor onto the vertical screen, when I try to move it above where my left, horizontal screen's boundaries end, my cursor jumps down to the bottom of my vertical screen. I can't access anything with my cursor above this boundary on my vertical screen. Note that my vertical screen's bottom is in aligned with my horizontal screen's bottom, and that the vertical screen sticks up above the horizontal screen, as both have a 1680 x 1050 resolution/widescreen aspect ratio.

- however, it appears that only my cursor is having issues accessing the upper part of my vertical screen. When I maximize windows in this screen, they properly fill it up entirely like they should. (but I still can't access the top parts of these applications with my cursor).

So obviously there must be some boundary managing where my cursor is allowed to go, and another set of rules defining the boundaries that the windows themselves can be shown/take up. Also note that because of my right monitor being rotated vertically, I'm forced to use Xinerama. Can someone help me go through my xorg.conf file, below, to help me get this "simple" cursor issue fixed? I'm sure it's just one minor thing that has to be changed, but I'm not sure what:

Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008
# xorg.conf (X.Org X Window System server configuration file)

[Code]...

View 1 Replies View Related

Ubuntu Multimedia :: Display Goes Black With Vertical Lines Top Half Of Screen?

Sep 5, 2010

I don't seem to have an "xorg.conf" file.

Gateway SB400a computer with Edubuntu Lucid installed. The problem first cropped up when I installed the Edubuntu packages on Ubuntu. I did a fresh install with Edubuntu and the problem persists. I don't want to go back to Ubuntu since this computer is for my Grandkids and I want to the Edubuntu stuff for them.

I don't have the specs handy, but I can get them. what I have to do to get them. (it happens when you get old)

EDIT: From my xorg.0.log: (--) PCI:*(0:0:2:0) 8086:2562:107b:4000 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xffa80000/524288

View 9 Replies View Related

Ubuntu :: White Vertical Lines On Gnome Panel Using Default Theme

May 4, 2011

I'm using the default Ambiance theme with 11.04, but my bottom gnome panel has strange white vertical lines as well as a very light background on active windows. It's almost as if it's using the Clearlooks theme for open applications and Ambiance for everything else. Also when I right click some of the systray items I get weird backgrounds in the tooltip. So far I've tried deleting all my .gnome config folders in my home directory, logging in/out etc. and nothing seems to work. Attached screenshots of the problems.

View 1 Replies View Related

Ubuntu Installation :: Sparc Blade With Large Vertical Stripes On Screen?

Jun 29, 2011

I've got 10.04 installed on my Blade 1000 workstation. Installed 6.06 first and worked my way up as per other postings. See attached cookbooks I wrote. Framebuffer is Elite3D-lite, and I have done the afbinit install. Using Xorg w/ Gnome and other windowing software to eliminate the possibility it is Gnome. From what I understand, Ubuntu does not require a custom X11 conf file like OpenBSD.

Current screen output shows large vertical stripes, where the stripes overlay on top of the GNOME desktop. Inside the stripes are the prior boot screen output of Ubuntu 10.04. When the screen saver kicks in, the Gnome desktop disappears, but the blue 10.04 stays visible. Mouse cursor moves across the screen, under each stripe as it goes.

My knowledge of framebuffers is limited. Would this then imply that the framebuffer is not fully "refreshing"? The screen does not provide full width even though the correct OpenBoot monitor configuration is set. Haven't found any mention of this issue from other Ubuntu/Linuxes Sparc users. Attached the X11 log. Looking at the log, I suspect this will need a custom X11 config file.

View 1 Replies View Related

Debian :: 8.2 Gnome Vertical Taskbar (windows List)

Sep 16, 2015

I am newbie in linux and trying it on my virtualbox. I am trying customize my envireonment. I like when my opened windows list placed vertically. I can do it in Windows and Debian + LXDE easily but what about Debian + Gnome? I can't find any settings for that.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved