I'm still getting some vertical lines through my splash screen, they are just a little darker purple than the rest of the screen, but disappear over the ubuntu logo/text/dots. I've tried the following from the faq, which made the screen at least show up, which is wasn't doing before.
Bootup/Plymouth.
Users should experience a much faster boot however some users may experience problems with Plymouth after the nVidia graphics driver has been enabled. Users may experience plymouth using lower graphics resolution. [URL]
Graphical solution : [URL]
Command line :
(Some of the fixes put forward dont work for everyone.)
One that works for nVidia and to try is this.
Code:
gksu gedit /etc/default/grub
and add the line in BOLD.
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
GRUB_GFXPAYLOAD_LINUX=1680x1050 Save the file and run
Code:
sudo update-grub
The resolution chosen should be your monitors native resolution.
Other graphics card users may get a black screen with flashing cursor and then a very short duration plymouth. [URL]. One fix for this is to create this file.
Code:
gksu gedit /etc/initramfs-tools/conf.d/splash
and add this option FRAMEBUFFER=y, save the file.
Then
Code:
sudo update-initramfs -u
Ubuntu 9.04 works fine, I have just installed Ubuntu 10.04 Lucid Lynx without problems, it runs fine but after a while the screen starts flashing and the only way out is to reboot with ctrl-alt-del. First of all I get a pale purple screen with blocks of random colour in the middle then it goes on to flashing between two screens. In one the top half of the screen is vertical black and white stripes and the bottom half is black, in the other it is a terminal screen with this distributed across it:
Starting common Unix printing system cupsed Pulse Audio configured for per-user-sessions Enabling additional executable binary formats binfmt support Checking battery state
On the latest occasion the text was "could not write bytes: Broken pipe" repeated all over the screen, followed by "checking battery state".
If I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
Since updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
I'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode) How do I fix this and Im wondering if it is a hardware problem?
I recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
I am seeing the Vertical screen wrap problem (discussed in [URL]) on a 64-bit Athlon XP desktop with the Ubuntu version that I installed yesterday (10.04 LTS 32-bit).
Vertical screen wrap, with the mouse pointer offset by a few pixels to the north, taskbar partially visible .
The xserver video amd package version is, xserver-xorg-video-amd 2.11.8-4 and the geode package is, xserver-xorg-video-geode 2.11.8-4. Is it possible that the problem lies in the new geode package (and not the intel/amd driver) ?
The screen info says it is 1280*1024*60Hz.I put this into the nouvou monitors hardware control centre. The screen is too stretched in the vertical. Some icons are cut off at the top.The screen is a V7 videoseven.For some reason the menu controls on the screen only work on the non screen movement icons. I cannot access them .how to get the vertical height corrected? If I have I will go back to the NV proprietary drivers but I would prefer not to do so.
Since yesterday a constant purple vertical line has appeared on my screen, positioned about 3/4 from the left, which remains even after I reboot.I'm running Ubuntu 10.10 on an Apple iMac (Intel), single boot Ubuntu.
Gateway SB400a computer with Edubuntu Lucid installed. The problem first cropped up when I installed the Edubuntu packages on Ubuntu. I did a fresh install with Edubuntu and the problem persists. I don't want to go back to Ubuntu since this computer is for my Grandkids and I want to the Edubuntu stuff for them.
I don't have the specs handy, but I can get them. what I have to do to get them. (it happens when you get old)
EDIT: From my xorg.0.log: (--) PCI:*(0:0:2:0) 8086:2562:107b:4000 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xffa80000/524288
I've got 10.04 installed on my Blade 1000 workstation. Installed 6.06 first and worked my way up as per other postings. See attached cookbooks I wrote. Framebuffer is Elite3D-lite, and I have done the afbinit install. Using Xorg w/ Gnome and other windowing software to eliminate the possibility it is Gnome. From what I understand, Ubuntu does not require a custom X11 conf file like OpenBSD.
Current screen output shows large vertical stripes, where the stripes overlay on top of the GNOME desktop. Inside the stripes are the prior boot screen output of Ubuntu 10.04. When the screen saver kicks in, the Gnome desktop disappears, but the blue 10.04 stays visible. Mouse cursor moves across the screen, under each stripe as it goes.
My knowledge of framebuffers is limited. Would this then imply that the framebuffer is not fully "refreshing"? The screen does not provide full width even though the correct OpenBoot monitor configuration is set. Haven't found any mention of this issue from other Ubuntu/Linuxes Sparc users. Attached the X11 log. Looking at the log, I suspect this will need a custom X11 config file.
I recently downloaded and installed Fedora 11 Alpha. I then installed the Nvidia drivers for my Graphics card (GeForce 7800 GTX). I discovered that Fedora 11 is using a Beta version of Xorg and an incompatible ABI. So, my drivers would not work with Fedora 11 without me dowgrading the Xorg server. I decided to reinstall Fedora 10 instead.
I started the install, and when the installation loaded the generic video drivers, my screen showed only a bunch of colored vertical lines. Fedora 10 doesn't allow me to install in text mode.
This is my third SLackware install. I installed 10,12, now 13. the Xorgsetup has changed I think, it does not display the screen to choose Horizontal and Vertical settings for the monitor. In addition, how can I set the Refresh rate?
When I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
I received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
Ever since the problem with Flash started up a few days ago, (Videos Lagging/jumpy/jerky horridly.) I decided to finally switch from 9.10 to 10.04...all was going well until a few minutes ago while I was browsing themes and running Konversation, the skin flickered black/green a few times then white vertical lines started appearing down from the top of the screen to about the middle, (Almost looked like the teeth on a haircomb). I had to then shutdown and restart. What id like to know is are the two connected (My earlier flash problem and this) or how I can fix it, so far it hasn't happened again but I'm starting to worry, I've never had problems with Ubuntu until a few weeks ago.
Out of nowhere Ubuntu (intrepid, I believe) has stopped loading for me. When it attempts to load gdm the screen starts flashing at the splash screen and then eventually dumps me to the terminal. From there I can login without any problems but can not get the GUI to load.
When I run sudo gdm-binary it does the flashing splash screen again and then spits out the error message: WARNING: Unable to find users: no seat-id found. Then a few warnings about longest graphic displayed 2.5xxx seconds I tried running sudo dpkg-recondifigure gdm and relaunch gdm as above and it did the same thing.
I was not able to successfully connect to my wireless network through the terminal to try to update in the hopes of that fixing the problem. Perhaps someone can give me instructions on how? (I have tried but can not figure out how to initialize wlan0).
Or, is there something I can do from my installation CD?
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
After being on the computer for awhile, it suddenly stops and goes to the purple screen like one would see when turning the computer on, only slightly distorted. after a few moments it switches to a black screen with a flashing _ but you can't type anything, and then it changes so it's blank, and these white bars start to flash on the screen. I just put 10.04 on my computer about two days ago, it's been doing it since. When I first tried to upgrade from 9.10 I encountered a huge error of some sort so I just put a brand new install onto the computer from CD.
I suddenly have a couple of unexplained black bars on the right side of my screen. I recently installed conky and guake, and GNOME Do, but the problem happens whether or not they're running. I've tried rebooting, and turning off desktop effects.
I have a Fujitsu P1610 convertible running 9.10. I only like the two bars visible when I need them otherwise they just take up valuable screen space, especially on a 8.9" screen.
My problem is I cannot make the bars come up by moving the cursor via my finger. It works fine if I move the pointer via a mouse but that is not an option when in tablet mode. How can I make them come up when I move the cursor to their location via my finger?
Everytime I boot up and get to the log in screen there are these horizontal bars across my screen how do I fix this? Is it my graphjcs card or something because I got an older hp pavilion laptop thats about 4 years old and is there a way to get these bars off my screen so I can see my laptop more clear?
I am using a emachine w2925 desktop and I installed the newest ubuntu. And it randomly goes to a black screen with white bars vertically half way down the screen that flash between bars and a black screen every few seconds.
I just set up a separate monitor, I am running Ubuntu 10.04, I use the nVidia graphics driver, Now the Bars on the top and the bottom of the screen won't appear and can't be used. I rebooted w/ out the second monitor and now it disabled itself. I can't get the terminal option at the login screen. When I rebooted the first time w/ the second screen icon's on the desktop appeared. Now nothing appears, but the background. I opened up my browser (Google Chrome) by my key combinations for those who are wondering how I posted this.
I'm a little new to ubuntu. I installed a video driver and after restarting I got as far as the login screen where I saw that the driver did not work: screen is mostly black with random bars of color. I was only able to restart in recovery mode mode. I tried the fix graphics option, which did not work and also some commands that I've seen posted in other threads. So far, still cannot delete the problematic driver or boot up normally successfully.
i've got a mythbuntu 10.10 box connected to my tv; sometimes i want to use it to watch internet tv. owever, when i try to resize videos to full-screen, sometimes black bars intermittently flash across the entire screen. this does not happen when the video is in a window or on the web page, only when going into full-screen mode. unfortunately, on some of these sites, even the "large" in-page video selection is still too small to be comfortably watched from the couch.
i'd suspect it's something with flash, but a similar thing happens when i'm using skype inside a windows xp on vmware. black bars flashing across when in "full-screen" but just fine when zoomed up inside a window. and i don't think vmware video output is flash-based. so it may be something else entirely.
also, this doesn't happen on all internet video - i've only had it happen on video from nbc.com and nfl.com (i haven't really had the opportunity or reason to try many other sites yet), and it was only a little noticeable from the nfl.com but nearly unwatchable from nbc. yet if i go to videos, i have no trouble getting any of their videos running full-screen.
i have an integrated geforce 8200 graphics, and i'm running the nvidia proprietary drivers version 256. i'm not running 260 since its vdpau capability is questionable, and i need that for mythtv. i have a 64-bit system.
does anyone have any ideas regarding this? the fact that i'm getting consistently good results from videos yet consistently bad ones from the tv networks makes me wonder if it's something i'm even going to be able to fix.
I have searched online with no success. The brightness control is working fine on my laptop. Problem is that the bars don't get rendered on screen. Instead I get like a static white line on screen everytime I press the brightness control. On boot however, I can see the correct bars. It is once I start my xsession, the bars do not show up. Here are my specs:
My computer keeps having some kind of meltdown. i really cant explain it other than the screen will go black, and then it will start flashing like white bars, or different colored bars. this happens at such random times i cant exactly pinpoint what sets it off.
the only thing i may have a clue to is that in my update manager, there is one thing that is a distribution update that i cant check to have it installed or anything like that. its then "Gij" and its description is it is "the gnu java bytecode interpreter" i just dont know if i should just go back to an earlier form of ubuntu because these problems didnt start happening until i upgraded to the new ubuntu
I have recently downloaded and installed Ubuntu 11.04 inside my copy of Windows. When I boot my laptop, I have the option to either boot in Windows or Ubuntu. When I boot in Ubuntu, I get the login screen all OK. But when the screen loads up, it is missing the top and left hand side navigation bars. It then appears to be trying to refresh itself (unsuccessfully) as after about 30 seconds the screen goes black and then the wallpaper image will come back, still without the navigation bars. This keeps on happening until I reboot the machine. The only way I can get the screen to reboot OK is to run the repair option on boot up.
I have notices that after the above has taken place and I have finally got the system to boot all OK by running the repair option, the system will not connect to my mobile broadband via the USB dongle. Not sure if they are related, but at this point they seem to be.
The screen that with the background pic at below is it call splash screen?
How to change the screen at above to text based that shows what services have been started, and if the service has been started, it will show ok at the right side.
