Ubuntu :: Skipping Encrypted Disk At Boot?
Jul 18, 2010
Ive managed to screw up an encrypted disk experiment, basically at boot i get ask to enter my password which i lost.
Only a data partition is encrypted, the linux system is unecrypted.
However, the skip option thats presented that should work via S does not work. every key in input adds one * behind the password prompt.
The password prompt changes from white to red though. as if in the white phase you should be able to skip.
Im to lazy at the moment to swap the drive and comment the drive in fstab
I already booted in single, but still the mount occours. is there another way to get the system booting?
ubuntu server 10.04
View 1 Replies
ADVERTISEMENT
Oct 4, 2009
I just upgraded my F9 system to F10 using they preupgrade method, and though nothing seems to have failed during the upgrade I can't boot my system any longer.I have a completly encrypted system, and so I need to enter a passphrase at boot. The new F10 system does boot and I do get a Password: prompt but the passphrase is not accepted.My passphrase doesn't contain any odd characters to prevent problems with keyboard mappings. Just plain letters (upper and lower case) and digits
View 9 Replies
View Related
Feb 23, 2010
I was running Ubuntu 9.04 Desktop on a headless Pentium 4 machine which is our file, mail, web & fax server. The two x 250GB SATA hard disks were in a RAID 1 array with full disk encryption. Ran the 9.10 upgrade via WEBMIN and it failed. I should have known then to copy over everything to a backup disk, but instead I rebooted.
On restart the machine accepted my encryption passphrase but promptly hung with a mountall symbol lookup error - code 127. So I can't start the machine to get at the disks, and using a Live CD is useless as it has no way to open the RAID array to get at the encrypted partitions. Although we have data backed up (as at last night) I'd hoped not to have to rebuild the entire server from scratch. But its looking bad.I have taken one drive out and plugged it into another machine (Hercules), and the partitions show up as /dev/sdb1 /dev/sdb2 /dev/sdb3.
If it weren't for RAID, I could open /dev/sdb2 the main partition) in Disk Utility and enter my encryption passphrase to get access. But RAID adds a layer of obstruction that I have not yet overcome. I used mdadm to scan the above partitions and created the /etc/mdadm.conf file, which I edited to show the 2nd drive as missing (rather than risk corrupting both drives). I activated the RAID array with mdadm, and cat shows:
Code:
root@HERCULES# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sdb3[0]
1815232 blocks [2/1] [U_]
[Code]...
I've been searching the web for hours but have yet to find someone with a solution to this situation. If anyone has a thought on how to access this disk I'd be pleased to hear from you. In the meantime I will start building a new (9.10) machine from scratch, without RAID, 'cos that's probably going to be necessary.
View 1 Replies
View Related
May 18, 2010
I have a usb-hdd at one location that I use for backup purposes.It is listed (by its specific label, not uuid because I don't want to go through the hassle of changing this when changing backup drives or adding one at a different location.Now, since upgrading from 9.10 to 10.04, I get the following message during boot when the usb-hdd is not present and thus not attached:The disk drive for "/media/backup" is not ready yet or not presentI need to press S to skip mounting manually, whereas 9.10 just ignored that fstab entry and continued booting. How can I get the old behavior back? Is there an option I can give in fstab that mounts the drive at bootup when present and ignores it when not?
Perhaps an even better solution would be to let the drive be mounted according to the fstab entry whenever it is attached (be it at bootup or at any other moment): is this possible?elated to that: are drives unmounted/mounted in a suspend/resume cycle?
View 2 Replies
View Related
Feb 15, 2010
I have installed ubuntu via the alternate installer, activating encrypted home directories, which in turn enabled to have encrypted swap partitions and disabled hibernation (suspend-to-disk). I understand the arguments for having an encrypted swapspace in these cases. However, I'd like to be nevertheless able to hibernate. Now that the system is already set up, I cannot change and completely encrypt my harddisk via LUKS+LVM as it is suggested in numerous places.Instead, I tried the following. I created two swap partitions (sda7 and sda: one being encrypted via cryptsetup, to be used as a 'real' swap (sda7). Another without encryption, which is not listed in /etc/fstab, so that it is not normally used by the system. I have then configured uswsusp in order to use sda8 as a resume partition:
[code]...
I have decided to encrypt the resume image - I don't care entering a password once every time I resume, it just shouldn't be at every boot. And this way, I can have hibernation without the uncomfortable solution of having my decrypted, open files on the disk as clear text. However, as sda8 is not 'mounted' when I want to suspend, I get the following error:
[code]...
When I try to suspend now, it works. The image seems to get correctly written to sda8. However, on reboot, the image does not seem to be detected and the system is not resuming. I end up with a fresh login screen. would be also to unmount sda8 upon resume, is this better done by entering a hook in /etc/pm/sleep.d or can I just continue in the wrapper script above by executing s2disk.unwrapped only by calling it (without 'exec'), and entering a swapoff line behind it?
View 1 Replies
View Related
Apr 11, 2016
I tried to access files from my old hard drive that used to be in a Mac (which unfortunately isn't working anymore). I connected it to my computer which I am running debian gnome on. So my question is how do i access a mac os extended disk image. The disk is encrypted and when i try to open it it says that i don't have permission. I think its encrypted in AES 128 bit.
View 4 Replies
View Related
Jan 15, 2016
Is it better to install LUKS to raw disk (/dev/sdb) or disk partition (/dev/sdb1)? What are best LUKS options?
"cryptsetup benchmark" output
Code: Select allPBKDF2-sha1 1310720 iterations per second
PBKDF2-sha256 862315 iterations per second
PBKDF2-sha512 590414 iterations per second
[Code] ....
Is slow hash better or how to choose it? It is clear that aes-xts is best choise. Is 265 bit key good?
View 3 Replies
View Related
Sep 5, 2011
I can see from /var/log/messages error messages and weird crashes that the disk in my laptop is on the way out. I plan to replace it but to do this I'd rather not have to install everything again.My laptop has these partitions:Windows Recovery (10GB)Windows 7 (NTFS 96.6GB)Linux /boot (ext4 100MB)Linux LVM (encrypted, 143GB)I need software that will allow me to create an image (or images) of all these partitions, save the image(s) to a USB hard drive and restore from those images once I've put the new, blank, hard drive into the laptop. Does anyone know of software (either open source or commercial pay-ware) or a technique to do this?
View 1 Replies
View Related
Dec 23, 2009
I have an external 300GB (Toshiba) disk which I encrypted (using cryptsetup luksFormat) and then installed an NTFS filesystem on (need to be able to use it in both Linux and Windows - using FreeOTFE). The disk mounts fine in windows and on my Fedora 10 system it automounts.
I can manually mount it on the RHEL5.3 system, and gnome-mount gets as far as recognising that it is encrypted and asking for the key, but it doesn't then mount it - I then have to manually mount the /dev/mapper/luks... device.
Does anyone know how to do this - if it works in Fedora 10 it ought to be possible to get it to work in EL5.3 I'd have thought.
View 4 Replies
View Related
Oct 29, 2009
How can I get a LUKS encrypted partition on an external USB device automounted with r/w access for non-privileged users?
Background:
I just reformatted an external USB device with ext4. The only partition is LUKS encrypted. Now, when I plug the device to my computer, KDE notifies me and asks me to enter the LUKS passphrase. Then it mounts the device. Little snag here: Non-privileged users have read-only access.
My user is a member of group plugdev, but not of group disk, as this was discouraged several times, e. g. by Robby Workman. With non-encrypted disks regular users have read/write access, or can change the filemodes accordingly, as far as I recall (currently I have no more non-encrypted disks left to verify it...)
View 11 Replies
View Related
Feb 9, 2011
This is my specific solution to my specific problem. After updating to Squeeze from my prior Lenny distro (amd64 with whole disk encrytion using LVM2, dm-crypt, LUKS) everything went well - at first. I was duped like so many, thinking that all was well and I could remove the legacy-grub (aka: Grub1) and just use grub-pc (aka: Grub2). As soon as I removed the legacy-grub and rebooted my laptop, I was confronted with:
GRUB Loading stage1.5 GRUB loading, please wait..Error 15 At this point I wasn't sure if it was a Grub problem or a deeper encryption problem - especially after reading that some people had missing packages in Squeeze (lvm2, dm-setup, initramfs-tools, etc.)
Okay, the solution for me.
1. download and burn to disk: debian-live-6.0.0-amd64-rescue.iso[URL]..
2. scroll to and press enter/return on: text rescue
3. choose a root directory - for example: /dev/blah/root (I wrote down the list of possible /dev/.... for reference - this helped me remember where and what I had partitioned in Lenny)
4. choose: Execute a shell in /dev/blah/root
5. once in the shell, I discovered I needed to mount a few of those partitions that I had written down in order to get access to grub-probe, update-grub, grub-install, etc. You may not have to if your partitions are minimal. I you need to use other partitions, type (for example):
[Code]...
View 1 Replies
View Related
Feb 11, 2011
I have 2 identical disks originally configured as a pair for a server. Each of the disks has 2 partitions dev/sdb1,dev/sdb2. The sdb1 partitions I had configured as a raid1 mirror. The sdb2 partitions were non-raid and used as extra misc. Space. Further, the raid setup is also encrypted using dm-crypt luks. Now I want to redeploy each of the disks for new purposes. One of the disks i want to deploy exactly as before (keeping the partitions and content), however without being part of a raid array.
I've successfully deployed this disk into a new system and I am mounting the dev/sdb1 partition as dev/md0 because the disk is set to autodetect raid. Actually I am using cryptsetup and mounting with mapper. Can I get rid of the setting for auto detect on this partition without losing the data, or breaking the encryption? I just want to mount the partition as a standalone encrypted disk. Is it as simple as doing crypt setup luksOpen /dev/sdb1 then mounting it with mapper? Or do I need to change the partition in some way. Or do I simply continue to operate it as a 'broken' raid array?
View 2 Replies
View Related
Oct 22, 2010
I have searched google but cannot find exactly what I need. I have an external usb stick that is encrypted and always plugged in. On boot i want to it automatically be mounted (so I don't have to go to places and click on it and enter the decryption phrase)
View 3 Replies
View Related
Aug 22, 2010
WinXp sp3 is on disk sdb, then installed Ubuntu 10.04 on sda, can go into diff OS without any problem. I am going to move sda to another machine, when I unplug sda, WinXp can't start to boot on sdb. How to fix it?below is my case output$ sudo fdisk -l
Disk /dev/sda: 160.0 GB
...
Device Boot Start End Blocks Id System
[code].....
View 2 Replies
View Related
Mar 7, 2011
I installed Ubuntu 10.10 64 on my laptop with the entire 500gb setup as encrypted LVM. This has worked well for several months with no problems. During this time i have been backing up the data to an external usb drive (1tb) on a regular basis. The usb drive was not encrypted. So, I thought it would be a good idea to encrypt the backup drive too. I wiped out the backup drive and set it up as one large encrypted lvm and mbr. This seemed to work fine but immediately afterwards I decided to erase that and set it up as encrypted lvm guid instead of mbr. I couldn't delete it while logged into my desktop so i decided to do it from a bootable gparted usb stick. In gparted i erased the 1TB backup drive once again and planned on setting it up the way I wanted once I was logged back into my ubuntu desktop. Now I cant boot into my desktop with the following errors:
cryptsetup: evms_activate is not available b0d) does not begin with /dev/mapper/
Then after waiting for a few minutes I get an error followed by (initramfs)
When booting from a live version of ubuntu the 250MB boot patition is recognized and 500 partion is there but it is labeled as empty/unused.
Also, I did choose to use the exact same passphrase as what is used on the main bootable drive when I set up the encrypted partition on the external 1TB drive.
View 9 Replies
View Related
Jan 3, 2010
I have XP on sda1, Fedora 11 encrypted on sdb 1 (boot) and sdb 2 (root), I would like Ubuntu on sdc 1 (boot) sdc 2 (root). However when I tried to install from the cd the partition manager does not see my Fedora as an OS (I assume because it is encrypted). So my question is how can I achieve my triple boot without having to have my Fedora unencrypted. I want it encrypted for a reason.
Also I cancelled the installation for Ubuntu and it reverted to a Live cd and I tried to mount my Fedora encrypted drive. Ubuntu asked for the pass and when I entered it I get an error saying it cannot be mounted because it is not a mountable file system. This is not good for me because I would like to be able to access all my hdd's from both distro's.
View 1 Replies
View Related
May 2, 2010
Times like this Ubuntu makes me want to pull my hair out. When I enter my pass on the login screen, it brings up a "Could not update ICEauthority file" error and then goes to a black screen. I've tried to fix this problem for the past 2-3 hours (searching google, these forums, etc) and at this point, I just want the data off my drive so I can restart with a fresh install of Ubuntu. I used the "gsku nautilus" command to mount the disk from a Ubuntu Drive boot, but it's not letting me have access to the encrypted drive. Does anyone know of a work around for this?
View 1 Replies
View Related
Jul 11, 2011
Is there a walk through guide for manual encrypted LVM creation? I tried once, but I didn't do it correctly.I have a partion that has windows 7, currently. I am trying to install ubuntu on an encrypted partiton, next. /boot needs to be unencrypted, but the swap and root partitions can be?
View 1 Replies
View Related
Jan 5, 2010
I've just started using ubuntu one. However, some of the files I store on there are sensitive so I encrypt them using seahorse. Right click, encrypt etc etc. My question is, is there a way to automatically get the encrypt process to delete the un-encrypted file when it makes the new encrypted copy?
View 6 Replies
View Related
Dec 30, 2010
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
View 2 Replies
View Related
May 14, 2010
I want to have /boot as an ext2 (I don't need journaling and I might want to undelete something) and all other partitions in an LVM.When the server starts it will prompt me for the LVM password. I would like to be able to contact the server using SSH (or using another secure method) and tell the password. Since /usr/sbin and all the other partitions are inside the LVM I guess I have a problem?
Is it possible to setup something like this? The SSH session for the LVM authentication does not have to be a daemon. It can be something which just sits and waits until I connect and input the password. And then the "real" SSH deamon kicks in.
View 3 Replies
View Related
Oct 16, 2009
my Fedora 11 system is not starting anylonger. It stops with the message:
Code:
VFS: Can't find ext4 filesystem on dev dm-0
The system told me since a while, that a lot of the sectors of one disk of the (software) RAID compound are failed already. So tried to disconnect each of the disks and start them separately. Unfortunaltly this is not working (for one its is not working at all, the other wents the same far as with both), when I tried to recover the system with the Fedora DVD, it said no distribution found. I am quite new and do not know so much about linux system, so i do not know what further information you could need. Maybe it can be important, that both disks are encryped (the system wents so far, that I can type in the password).
View 2 Replies
View Related
Aug 24, 2009
There is a disk 500 gb, it is broken on /boot and on /root and on /dev/sda1 and /dev/sda2. Whether prompt it is possible to redistribute a disk without loss of data namely it is necessary to make/boot and two equivalent on disk volume.
View 3 Replies
View Related
Oct 26, 2010
I've installed Squeeze on a USB stick, but can't get it to boot. I've had this problem before and gave up last time. I installed on an encrypted LVM - here is the grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
[Code]...
I added rootdelay=10 and switched root from hd1,1 to hd0,0 as suggested elsewhere. Still no go, i jsut get dumped into ramfs shell with an error message saying that /dev/mapper/crunchbang-root doesn't exist.
View 1 Replies
View Related
Nov 3, 2015
I installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
View 3 Replies
View Related
Feb 22, 2010
I'm trying to have a LUKS encrypted partition mounted at startup and to have GDM ask for my key so it will decrypt. Now I followed [URL] to the letter. Except for now, I have it just mounted into /mnt/cryptohome so I'm not messing with my system. My problem is the one everyone mentions in the comments, ubuntu isn't asking for the LUKS key in the X display, it's asking in the first terminal (Ctrl-Alt-F1). This will not do. I need it to ask to mount my drive before I'm even asked to login, so eventually I can encrypt my /home.
View 9 Replies
View Related
May 27, 2010
I'm having a problem auto-mounting a new luks partition. I have crypttab and fstab entries. I already have my primary encrypted partition (root) mounting at boot (from the install), but after creating this one manually, it does not open on boot. It auto-mounts when I run the following command manually after boot: sudo luksOpen /dev/disk/by-uuid/<uuid> mycrypt
/etc/crypttab entry:
personalcrypt /dev/disk/by-uuid/a1af5b7b-db58-4690-b586-b74407795e2c none luks
/etc/fstab entry:
[code]...
View 1 Replies
View Related
Aug 1, 2011
I've installed Ubuntu 11.04 on a Fujitsu Esprimo E900. During installation, I've used the guided encryption setting because neither GRUB nor LILO would ever install on the LVM configurations I created myself. So after installing Ubuntu 11.04, when I boot regularly, the computer freezes completely. When I try to launch the recovery mode kernel, I get this far and then the computer locks up, too. Ubuntu lockup during boot by germanium, on Flickr
You can see the label is sdb5_crypt which is a bit odd since the partition is on /dev/sda. However, I already tried changing grub.cfg to /dev/sda instead of /dev/sdb but that didn't do anything. This is all a bit odd to be. The funny thing is I've been trying to set this computer up for a month and I'm a professional programmer (Java, JavaScript, Groovy) with 20 years of programming experience and I never thought Ubuntu would be this hard to install on a more-or-less stock Intel box.
View 2 Replies
View Related
Feb 6, 2011
I haven't used encryption previously but through that for better security, I would enable it on one of my disks. I went though the process and when done, copied data to the device etc. My house had a powercut the other day and I noticed that the device did not mount automatically upon restart. Unfortunately, I have forgotten the de-cryption password and have lost access to my data. Is there a way of either recovering my password or getting the partition to mount without the password so I can access the data, copy/back up and then re-create the partition without encryption?
View 2 Replies
View Related
Jul 16, 2010
I just upgraded my OpenSuSE 11.2 system to 11.3 and have experienced the following problem:
My hard drive was encrypted beforehand, and after the upgrade(which went smoothly) will no longer decrypt. I type in my passphrase at the prompt, press enter and the start up process never resumes. I am able to access the filesystem from the Rescue System option in the install disk. What's strange is that this worked smoothly on another laptop of mine.
View 1 Replies
View Related
