Is there a walk through guide for manual encrypted LVM creation? I tried once, but I didn't do it correctly.I have a partion that has windows 7, currently. I am trying to install ubuntu on an encrypted partiton, next. /boot needs to be unencrypted, but the swap and root partitions can be?
View 1 RepliesMy laptop setup is:
sda1: W7
sda2: FAT16
sda3: /boot
sda4: encrypted LVM with debian (everything besides /boot)
now I've re-installed W7 so grub was overwritten. I've tried the procedure which worked for me previously:booting with the netinst usb in rescue mode, choosing a root partition to mount, using grub-install to reinstall the grub:
Code: Select allmount /dev/sda3 /boot
grub-install /dev/sda
Now I'm on Jessie (stable), and this time this fails, and I am able to mount only sda3.grub-install doesn't exit so I'm assuming it has been replaced by `grub-installer'. also '/boot' doesnt exist so I created it manually.
Code: Select allmount /dev/sda3 /boot
grub-installer /dev/sda
The latter fails with
Code: Select all/dev/sda/proc not a directory
while installing ubuntu 10.10 from disc on a free partition i'm only getting 2 options instead of 3 'use entire disk' & 'advanced install' but no installing along side other operating system i really want to install along windows 7 as a dual boot, but how do i do this is the option is not there i'v had a look at advanced but looks a bit daunting.
View 3 Replies View RelatedI have been running Ubuntu 9.10 and Win XP Professional as a dual boot system, with each OS on its own HDD, smoothly and seamlessly since the release of 9.10. Yesterday one of my kids got a video file from a friend and it had a virus along with it. Long story short, in the process of trying to repair it Windows shuddered it last agonizing breath.
Now I have to re-install Windows because some of the programs the schools make them use require Windows. How do I go about doing this without damaging my Ubuntu installation? Will re-installing on a second drive affect GRUB?
I installed Lucid Lynx on a dual boot with a previously installed copy of Windows 7 and everything installed fine via Wubi...but now when I boot up and I get to my Boot Mgr and select Ubuntu I get the following message and can not get past a black screen stating -
Try (hd0,0) EXT2
I have tried to read what others have done to fix this but nothing has worked so far,Also I can still log into Windows 7 just fine, just no Linux...
So I finished downloading Windows XP Ultimate (It is real. It's not officially supported by Microsoft) and I expected it to be small like Ubuntu was. I only have a CD-RW drive. I realized the extreme size difference with Ubuntu over 600mb and XPU over 4gb. I know how to modify partitions from the Live CD. I'm wondering if it's possible to install XPU or any version of XP while the operating system is active. It was possible with Windows 98. This might be the wrong place to post, but I really want to dual-boot Windows. Linux is great, but I would like to use SOME of my stuff without WINE.
View 1 Replies View RelatedI have an Asus Xonar DS, and am getting no sound in Windows whatsoever. I'm pretty sure something in Ubuntu is causing the problem as this only started happening after I installed it. I used to get heavily distorted sound in Windows, and now nothing at all. I've tried removing pulseaudio and disabled alsa, restarted ubuntu and then went into Windows, and it didn't help. Sound is 100% fine in ubuntu.
View 9 Replies View RelatedI want to set up my PC so that I have Windows 7 installed on one hard drive and Ubuntu Studio installed on a completely separate hard drive. I currently have both hard drives installed in my PC and the larger one (640GB) has Windows 7 installed and is currently taking up that entire drive. My other hard drive (160GB) has a wubi install of Ubuntu 10.10 on it so it shows up on the Windows boot menu. What I want to do is wipe the smaller hard drive and install Ubuntu Studio on it and have it show up in the boot menu just like my wubi install does.
I need to know things like:
1. When I install Ubuntu Studio, do I install the boot loader to the MBR of the hard drive I'm installing it on?
2. How exactly do I add Ubuntu Studio to the Windows boot loader?
I admit that I am a bit confused on how to proceed with this.I currently have an older version of Ubuntu (6 something) and windows vista and I have dual booting. I am trying to install 10.04 on top of the older Ubuntu and I want to keep the Windows partition. Last time I tried, I completely screwed up.I have multiple partitions now with a bunch of smaller ones that got created by mistake. I would like to re-size my partitions to have 1 main windows partition, 1 linux partition and 1 swap file partition. My HD is 160GB and I would ideally like to have the Ubuntu and Windows partitions roughly the same size.I included some screenshots of the install process and also a screenshot of my partitions.
View 1 Replies View RelatedI have a DOS/Linux dual-boot system. After recently replacing the original motherboard (an Elitegroup P6VEM3, of all things!) with a salvaged Dell D300 motherboard, I'm preparing to replace the Red Hat 8 currently installed with a Ubuntu live CD that I've had for some time (but that wouldn't work at all on the old motherboard, for some reason) I have a question about the "partitioner" stage of the installer: I don't know what to do with my 5 DOS volumes. My hard drive is partitioned as follows (from the partitioner's report when I select manual mode; annotations in parentheses):
/dev/sda
/dev/sda1 fat16 57MB 33MB (C:, "DOS")
/dev/sda5 fat16 106MB 33MB (D:, "STUFF")
/dev/sda6 fat16 633MB 121MB (E:, "APPLICATION")
[code]....
I'm currently dual-booting Vista and Win 7. Do I have to install Grub or can I continue to use the Windows boot loader?
View 5 Replies View RelatedMy dell machine has the following: A raid 0 SAS config with Windows 7 installed in one partition, and ubuntu in the other partition. Then two seperate sata hdd. The raid drive is set as first boot, and Windows views it as disk 0 and boots just fine. When I installed ubuntu 10.04 on the second partition, it viewed the disk as sdc. And when booting off the raid drive,im not given a grub menu to choose ubuntu orwin 7,windows 7 boots all on its own.
View 9 Replies View RelatedI have a desktop Windows PC with three hard drives. Having successfully installed Ubuntu on a laptop I used the same CD image to boot Ubuntu on my desktop machine. All seemed well so I selected the option to install alongside the existing OS. I left the choice of drive as presented by the installer (it was the largest one) and asked for an 80G partition for Ubuntu. The installation went well but when the machine was restarted it just booted straight into Windows. No sign of the bootloader menu. I'm guessing the BIOS doesn't look at the drive where Ubuntu is installed, and the installer did not put the bootloader on the Windows boot drive. The Windows drive is too small to install Ubuntu there.How do I fix this so that I can dual boot, or alternatively how do I get rid of Ubuntu and reclaim the 80G for Windows?
View 3 Replies View RelatedI'm looking for a good partition scheme to install BT4 dual boot with windows 7, I've freed up about 160 G for my install and was going to use BT4 as an everyday distro and wanted enough space to install extra packages like vlc and what not as well as use wordlist.sh to create a substantial dictionary. These are my initial partitioning plans 3G /,6G usr, and about 3G swap with the rest being /home for word lists and whatnot would you mind sharing your partitioning setups so I can make this efficient as possible?
View 2 Replies View RelatedI have red hat linux installed then I want to install win XP in dual boot.
View 2 Replies View RelatedI have Win XP installed on one hard disk drive (HDD1) and Ubuntu 9.10 installed on another hard disk drive (HDD2). Win XP was installed first then Unbuntu 9.10 which set up a dual boot menu. Win XP will no longer boot because I changed the BIOS setting from IDE to AHCI. The problem this causes is described at [URL]. The problem is that if you installed Windows in IDE mode (ie you didn't use F6 and supply a driver disk), then simply changing the BIOS setting to AHCI mode and rebooting will cause Windows to fail and will require a repair install. Most people have been advising to reinstall Windows if you want AHCI enabled. I have read that Win 7 supports AHCI "out of the box" so instead of re-installing Win XP I want to install Win 7 to replace it. I would like to know in advance what installing Win 7 will do to the dual boot menu?
View 3 Replies View RelatedUsing 9.10 in dual-boot with XP:
Dell 600SC running an Adaptec 39160 dual channel SCSI controller which has 2 disks connected to it. The machine also has 2 IDE drives connected to it. The boot order of the disks is set to the SCSI disks as the first in boot order (after CD).
I am trying to set it to maximize performance from the SCSI config so I have XP on the first SCSI and I set up Ub 9.1 on the second SCSI in a dual-boot configuration.
In this set up the machine when rebooting goes straight to XP (on the first SCSI) and does not even see the Ub installation. The installation went fine and no complaints. On the same machine if I just had Ub on the first SCSI - machine boots fine (albeit after a long pause looking for the bootloader).
So with XP on the first disk (which I need to - to have XP) the Ub bootloader does not seem to set the right params to be able to boot.
Again this is with 9.1. Not trying 10.04 as with 10.04 I don't even get to boot even with standalone Ub (with no XP). However it installs fine but does not find bootloader in 10.4, so we will keep to the 9.1 for now. I am however open to working with 10.04 if there is a solution in dual-boot with XP in my config.
So again 9.1 installs fine with XP on 1st SCSI disk, an ub 9.1 on 2nd SCSI disk, but then bootloader does not get activated and machine goes straight to XP.
I have installed vista(Preloaded) and Ubuntu 10.10 in dual boot in my laptop. Now i want to get rid of vista, and want to have only Ubuntu, also i want to assign all space to Ubuntu. I have two query's
1. How could i cleanly uninstall Vista from my system? (I Used WUBI to install Ubuntu)
2. Can i install Vista in future? (As my Vista was preloaded, Vista didn't recognize the hard drive on which Ubuntu is installed)
I've recently bought a new computer and installed Windows 7 on it, but left 100GB of space on a separate partition so I could put Debian next to it in dual boot. I have the new Intel i7 950 processor and I run Windows 7 Proffesional 64 bit, so I assumed I had to pick the ia64 debian image. However the CD I burned from the ia64 image didn't boot. (a black screen started and an underscore kept flashing, but nothing else happened)[URL]
I've managed to install i386 Debian on a older intel pentium 4 computer before and that worked fine. I believe I used another application to burn the CD then. This time I've burned the CD with the default Windows CD burn application. I can try burn more CD's but I don't have much left so I want to make sure this is the problem before attempting again. (the burned files on the ia64 CD look exactly the same as the files on the i386 CD, when browsing through the cd files in windows) "If your PC has a 64-bit AMD or Intel processor, you will most likely need the "amd64" images (though "i386" is also fine), the "ia64" images will not work."This seems a bit strange, they recommend me to use the amd64 image if you have a "64-bit AMD or intel processor". I dunno if this is a typo, but it seems weird to me that the AMD-64 Debian version would also work on my Intel machine
essentially what the title says. Clonezilla cannot be installed in ubuntu so running a live linux on the usb and installing the applications in that is not an option.
View 2 Replies View RelatedI recently bought a portable with a Windows 7 system.I want to install openSUSE 11.3 but I also want to keep Windows 7 - so I need to install a dual boot system.On my desktop I have GRUB with Windows XP and openSUSE 11.3 and all works fine.How do I proceed ? I did not find much documentation yet, but maybe I looked in the wrong places.
View 7 Replies View RelatedIve created two RAID0 partitions on my drives, a 500GB and a 60GB. Im trying to install Ubuntu on the smaller partition (ive already put Win 7 on the larger one) and every time when i get right to the last part of installation it says Grub couldnt be installed. "the grub package failed to install in arget......."
View 1 Replies View Relatedme a easy and right answer to this post
View 3 Replies View RelatedI got to the part where I'm supposed to partition Mint. I've got a 500GB hard drive, and I thought I'd give 300GB to LM--but I'm unclear about using ext2, 3 or 4. What about the swap file? Is that automatic?
View 10 Replies View RelatedI'm a pretty experienced Windows user, and have coded in x86 and win32 API for a while, so I know the system reasonably well. I've used windows since the days of Win95, and prior to that I had an Amiga - so I'm pretty rusty in unix-like operating systems. I have little C coding knowledge beyond reading it, though I can understand what the programmer is doing from reading the source. My only experience with installing linux was on a 486 laptop that failed spectacularly when the CDROM couldn't be detected and used, so I'm necessarily a little wary of doing this, but I've become quite exasperated with Windows lately.
I have decided to make my life interesting (if not easier at first) by dual-booting Linux with Win7. My current machine is a dual-core intel laptop with 2GB of RAM and an ATI X1250 mobile GPU, with a 120GB HDD. I have two partitions currently on this machine - both 60GB-ish. The main C: drive is Win7. I'm aware of the hidden partition that Windows installs. I have an external 1TB USB drive for my applications and data, so space shouldn't be a problem. There is no floppy drive (unsurprisingly) and I can boot from the internal DVD drive.
I have chosen the Slackware 13 distro because it seems to be well respected as a learning tool for unix-like operating systems. My main aim here is not to abandon Windows at first, but to learn a new OS. I'm aware that Slack may not be the most user-friendly distro, but will give me knowledge that I might not gain under other distros. If I'm making a mistake here, then let me know! I have plenty of free time to devote to this little project, and I'm not afraid to learn. I am however afraid to destroy my Win7 fall-back. If all else fails, I need to be able to go back to a working OS to jump on the net to find the answer to what went wrong.
So my question, as per the subject title, is: What do I need to know before I do this? I have no idea what I'm doing with regard disk partitioning beyond Partition Magic - which I don't actually possess anymore. I can use the Windows disk management app. I have no idea how to manage a boot sector. So are there any gotchas that I need to bear in mind? I've already read this thread: [URL]. Which I must admit looks very complicated! I have a fair bit of time before my Slackware 13 DVD-ISO image downloads (20KB/Sec) so have some time to gather information.
I have Windows 7 on my laptop and am attempting to install Ubuntu 11.04 from CD.I boot from the disk drive, follow the prompts and eventually get to the screen where I can set how much space I want to give to the Ubuntu partition vs the Windows partition. My hard disk is 250GB, so I reduce the Windows one to 100GB (currently has 80GB of files on it) and set the Ubuntu one to 130GB (the other 20GB is split between the two hidden Windows 7 partitions).
I then click to continue and the progress bar for the install starts up but doesn't move, it just sits at 0%. I realised that the dialogue box underneath the progress bar can still be expanded and asks me to test using -n and -s, but when I type either of these into the box and hit return, nothing happens. I have checked my download of the .iso I used using WinMD5Sum and the hash matches up. I have already tried installing from USB but this threw an error, hence using CD. My laptop is a Dell Inspiron 1546 running Win 7 Home Premium 64 bit Processor: AMD Turion X2 Dual-Core Mobile RM-75 2.20GHz
the only issue that i have: the wireless is always disabled.
when i install new updates, the wireless comes back enabled and everything is fine but when i restart ubuntu its disabled again !!
i have a DELL studio 1537 laptop (broadcomm wifi card)with a win7 service pack 1/linux ubuntu 10.04 LTS dual boot.
I currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
View 2 Replies View RelatedI got a Dell Studio 1555 preinstalled with Vista and it already had 3 Primary Partitions. I needed to install Fedora Core 9 on this machine and to organize my HDD(500 GB)
I had two options:
1) Either to create a fourth primary partition
2) Create an extended partition with a number of logical partitions
I chose the option 2. I want to know if i make some free space by deleting one of the logical partitions, can that free space be used for installing Fedora ?
Also how to proceed with the installation?
I have to operating systems installed, Ubuntu 10.10 and Windows 7, working perfectly. I also have a partition, currently empty, to be shared between both OS, but I would like that partition to be encrypted.
View 2 Replies View Related