Fedora Installation :: F9 To F10 Upgrade, Now Can't Boot Encrypted Disk?
Oct 4, 2009
I just upgraded my F9 system to F10 using they preupgrade method, and though nothing seems to have failed during the upgrade I can't boot my system any longer.I have a completly encrypted system, and so I need to enter a passphrase at boot. The new F10 system does boot and I do get a Password: prompt but the passphrase is not accepted.My passphrase doesn't contain any odd characters to prevent problems with keyboard mappings. Just plain letters (upper and lower case) and digits
View 9 Replies
ADVERTISEMENT
Feb 23, 2010
I was running Ubuntu 9.04 Desktop on a headless Pentium 4 machine which is our file, mail, web & fax server. The two x 250GB SATA hard disks were in a RAID 1 array with full disk encryption. Ran the 9.10 upgrade via WEBMIN and it failed. I should have known then to copy over everything to a backup disk, but instead I rebooted.
On restart the machine accepted my encryption passphrase but promptly hung with a mountall symbol lookup error - code 127. So I can't start the machine to get at the disks, and using a Live CD is useless as it has no way to open the RAID array to get at the encrypted partitions. Although we have data backed up (as at last night) I'd hoped not to have to rebuild the entire server from scratch. But its looking bad.I have taken one drive out and plugged it into another machine (Hercules), and the partitions show up as /dev/sdb1 /dev/sdb2 /dev/sdb3.
If it weren't for RAID, I could open /dev/sdb2 the main partition) in Disk Utility and enter my encryption passphrase to get access. But RAID adds a layer of obstruction that I have not yet overcome. I used mdadm to scan the above partitions and created the /etc/mdadm.conf file, which I edited to show the 2nd drive as missing (rather than risk corrupting both drives). I activated the RAID array with mdadm, and cat shows:
Code:
root@HERCULES# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sdb3[0]
1815232 blocks [2/1] [U_]
[Code]...
I've been searching the web for hours but have yet to find someone with a solution to this situation. If anyone has a thought on how to access this disk I'd be pleased to hear from you. In the meantime I will start building a new (9.10) machine from scratch, without RAID, 'cos that's probably going to be necessary.
View 1 Replies
View Related
Jun 11, 2009
I just upgraded via preupgrade-cli (from FC10), rebooted, the upgrade process completed, then the system rebooted and I just see a blinking white cursor now.I was able to boot up from a live cd of FC11, but I'm not sure how I can repair the system.
View 14 Replies
View Related
Feb 16, 2009
P**sed right off now, tested this upgrade on two test systems before hand to make sure this would work.Upgrade my server from FC9 to FC10, it had two Encrypted XFS volumes on totalling 1.5TB of files which I don't have space to backup anywhere else.Have now upgraded and the Encrypted volumes are showing as not existing "volume name does not exist"
View 2 Replies
View Related
Jul 18, 2010
Ive managed to screw up an encrypted disk experiment, basically at boot i get ask to enter my password which i lost.
Only a data partition is encrypted, the linux system is unecrypted.
However, the skip option thats presented that should work via S does not work. every key in input adds one * behind the password prompt.
The password prompt changes from white to red though. as if in the white phase you should be able to skip.
Im to lazy at the moment to swap the drive and comment the drive in fstab
I already booted in single, but still the mount occours. is there another way to get the system booting?
ubuntu server 10.04
View 1 Replies
View Related
May 26, 2011
I have a setup that looks like this
[Code]....
and I'm dumped into recovery mode. However, if I remove these mounts from /etc/fstab via comments, I can wait for the system to boot (which it does very quickly) then mount the mapper devices myself. So what is going on? Has something changed wrt logical volumes, or is this just systemd? I can live with manual mounting, but any advice on resolving the automatic mounting situation would be great.
[Code]....
View 2 Replies
View Related
Jul 16, 2010
I just upgraded my OpenSuSE 11.2 system to 11.3 and have experienced the following problem:
My hard drive was encrypted beforehand, and after the upgrade(which went smoothly) will no longer decrypt. I type in my passphrase at the prompt, press enter and the start up process never resumes. I am able to access the filesystem from the Rescue System option in the install disk. What's strange is that this worked smoothly on another laptop of mine.
View 1 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
May 30, 2011
I followed the guideline 'How to use PreUpgrade' to upgrade F14 -> F15. What happened was that after reboot: 1. The screen was a mess ... no readable information 2. No reaction on pressing 'return' 3. The disk led showed no activity, so I reseted the computer after 5 minutes inactivity. The system came up but with F14. I repeated the 'preupgrade' and all messages are in [URL]... but still F14 comes up after reboot. Where have I missed ... eager to get F15
View 4 Replies
View Related
Feb 9, 2011
This is my specific solution to my specific problem. After updating to Squeeze from my prior Lenny distro (amd64 with whole disk encrytion using LVM2, dm-crypt, LUKS) everything went well - at first. I was duped like so many, thinking that all was well and I could remove the legacy-grub (aka: Grub1) and just use grub-pc (aka: Grub2). As soon as I removed the legacy-grub and rebooted my laptop, I was confronted with:
GRUB Loading stage1.5 GRUB loading, please wait..Error 15 At this point I wasn't sure if it was a Grub problem or a deeper encryption problem - especially after reading that some people had missing packages in Squeeze (lvm2, dm-setup, initramfs-tools, etc.)
Okay, the solution for me.
1. download and burn to disk: debian-live-6.0.0-amd64-rescue.iso[URL]..
2. scroll to and press enter/return on: text rescue
3. choose a root directory - for example: /dev/blah/root (I wrote down the list of possible /dev/.... for reference - this helped me remember where and what I had partitioned in Lenny)
4. choose: Execute a shell in /dev/blah/root
5. once in the shell, I discovered I needed to mount a few of those partitions that I had written down in order to get access to grub-probe, update-grub, grub-install, etc. You may not have to if your partitions are minimal. I you need to use other partitions, type (for example):
[Code]...
View 1 Replies
View Related
Nov 17, 2010
I'm trying to upgrade, but have this issue: usually I download the DVD iso, run checksum, burn it, test the disk, and when found ok, I run the upgrade. Now, however, I keep getting "disk not ok" at 95% of the disk test. I have downloaded and verified the iso twice, used 2 DVD's, 2 different DVD-drives, 2 different computers and keep getting this error at 95%.
View 2 Replies
View Related
Dec 23, 2009
I have an external 300GB (Toshiba) disk which I encrypted (using cryptsetup luksFormat) and then installed an NTFS filesystem on (need to be able to use it in both Linux and Windows - using FreeOTFE). The disk mounts fine in windows and on my Fedora 10 system it automounts.
I can manually mount it on the RHEL5.3 system, and gnome-mount gets as far as recognising that it is encrypted and asking for the key, but it doesn't then mount it - I then have to manually mount the /dev/mapper/luks... device.
Does anyone know how to do this - if it works in Fedora 10 it ought to be possible to get it to work in EL5.3 I'd have thought.
View 4 Replies
View Related
Nov 24, 2009
Was using preupgrade from FC11x64 to 12x64. Preupgrade caused alot of problems like /boot not enough diskspace. After some searching found the steps and preupgrade proceed happily but after reboot got kernel panic grrr.
Took 3 days to find another machine to download and burn the FC12x64 disk. So I booted via the FC12x64 disk and selected the 1st option to install/upgrade. I thought it is upgrade and so choose replace my existing linux system however it wiped out everything on the disk. I have some important data in my home directory. I think it is in LVM, not a partition like /dev/sda1. How can I recover them? Was using stock settings.
View 3 Replies
View Related
Dec 15, 2009
I attempted to do the upgrade from 11 to 12 with the Preupgrade Assistant. Unfortunatly something went terribly wrong. Everything went well, excluding the size of partition error, untill the reboot. I did have to remove two previous installs. Now grub gives me an option to upgrade to Fedora 12. When I select this the screen runs code quickly and the screen goes blank with alot of disk activity. Then nothing. Is there a method of recovering this install? I am fairly new to Linux Administration and I am just knowledgable enough to mess things up.
View 1 Replies
View Related
Jul 28, 2011
I just tried reinstalling ubuntu 11.04 from the live disc, installation went well but afterwards I cannot get access to my home directory which is encrypted and I stupidly forgot to note the mount passphrase. is there anything I can do? where would the mount passphrase be stored from the previous installation and is there any chance of recoving it. Home and the root are on the same drive and the installation did not format the drive.
View 9 Replies
View Related
Feb 2, 2010
I have a hp laptop with two internal drives and I also have a large USB drive. When I boot normally the internal boot drive is /dev/sda, the second internal drive is /dev/sdb, and the USB drive is /dev/sdc. I used Acronis True image to clone the internal boot drive onto the USB drive. I would like to be able to boot the Fedora 12 instance on the USB drive but do not seem to be having much luck... Here is what I have tried so far... The following is an entry in grub.conf
title Fedora (2.6.31.12-174.2.3.fc12.i686.PAE)
root (hd0,5)
kernel /boot/vmlinuz-2.6.31.12-174.2.3.fc12.i686.PAE ro root=UUID=101b1556-d097-4d85-9bc5-fac2f9abe5d8 LANG=en_US.UTF-8
[code].....
and tried to boot....Got a no such device error.While in grub I tried the grub command setup (hd2) and then got in the bios and set the boot order to USB drive before internal drive.In this case a reboot does nothing I just get a flashing cursor, grub is not entered.
View 1 Replies
View Related
Sep 18, 2009
How to correctly install F11 on the same disk as Windows. I have created the partition but can't tell what F11 install to use to setup as dual boot with Windows XP Pro 64bit.
View 2 Replies
View Related
May 13, 2010
Today I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"
View 5 Replies
View Related
May 25, 2011
Today I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;
One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /
[code]...
View 14 Replies
View Related
Jan 3, 2010
I have XP on sda1, Fedora 11 encrypted on sdb 1 (boot) and sdb 2 (root), I would like Ubuntu on sdc 1 (boot) sdc 2 (root). However when I tried to install from the cd the partition manager does not see my Fedora as an OS (I assume because it is encrypted). So my question is how can I achieve my triple boot without having to have my Fedora unencrypted. I want it encrypted for a reason.
Also I cancelled the installation for Ubuntu and it reverted to a Live cd and I tried to mount my Fedora encrypted drive. Ubuntu asked for the pass and when I entered it I get an error saying it cannot be mounted because it is not a mountable file system. This is not good for me because I would like to be able to access all my hdd's from both distro's.
View 1 Replies
View Related
Nov 13, 2009
Just now, I finished upgrading from Fedora10 to Fedora11. But Now the Fedora 11 cannot boot, the screen just stay blue with 'fedora'.
btw, my computer is Dell Inspiron 1525.
View 2 Replies
View Related
Nov 27, 2010
I upgraded from 12 using an x86_64 installation DVD on a Dell Poweredge 300. All seemed to go well until right at the end when it took over two hours not to 'finish' the upgrade. Cycling round into the shell prompt showed the machine was idle and there didn't seem to be anything waiting for anything to complete. In the end I was forced to re-boot.
I got a kernel panic saying it couldn't mount on unknown block (0,0).I re-ran the upgrade DVD and it said there was one rpm left to apply called upstart-[something I missed] and it successfully applied this and then claimed I had successfully completed the upgrade. Sadly, re-booting got the same.Using the older F12 kernel still works, so my server is operational, but believes it is still F12 (and these point to (0,0) as well so it isn't that). If I try to do a yum upgrade, it will only try to upgrade a few F12 packages that must have appeared in the last few days as it was fully patched a week ago.
I think the kernel panic may be due to missing disc drivers from what my googling reveals, or a missing initrd image. There is no initrd parameter in grub.conf, I've tried creating one manually but I get a load of errors saying the /lib/modules/2..../modules.dep file is missing. Another machine that I have upgraded has such an initrd parameter in grub.conf - so I may well need to put this in.
View 1 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
Feb 11, 2010
I have several RHEL 5.0 servers in a secure network. We have identified around 200 rpms from 5.4 that we would like to upgrade. These servers have no connection to the internet, and very limited connection to the corporate network.
The application guys will not approve a full 5.4 upgrade as the app is reliant on certain rpms from 5.0.
So how can I create a boot disk that will install just the selected 200 rpm's. I have been trying to modify (remove rpms) from the downloaded 5.4 dvd, but with no luck. I have also had a look at anaconda, but seem to be going round in circles.
View 4 Replies
View Related
Nov 3, 2015
I installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
View 3 Replies
View Related
Aug 22, 2010
WinXp sp3 is on disk sdb, then installed Ubuntu 10.04 on sda, can go into diff OS without any problem. I am going to move sda to another machine, when I unplug sda, WinXp can't start to boot on sdb. How to fix it?below is my case output$ sudo fdisk -l
Disk /dev/sda: 160.0 GB
...
Device Boot Start End Blocks Id System
[code].....
View 2 Replies
View Related
Jan 22, 2009
It's become a tradition since I've installed FC6 on my machine: after each Fedora upgrade, the PC hangs at reboot because of a badly make initrd !
I found this post a while ago that helped me to solve the problem by rebuilding the initrd with the right librairies in it: [url]
So for each upgrade I've done the last 2 years I had to follow again these instructions to rebuild the initrd.
I've just finished the upgrade from F9 to F10 and I faced the following friendly message:
Code:
Allright, not a surprise in fact. While rebuilding the initrd I discovered there's no more /lib/i686/nosegneg/ directory in Fedora10's initrd. Therefore I reinstalled the libm-2.9.so library as follows:
Code:
Once the initrd rebuilt, I rebooted and faced a second friendly message:
Code:
I searched for posts reporting problems with segfault in ld-2.9.so but didn't find anything. So now I'm with a successfully upgraded fedora 10 system that refuses to boot.
By the way, I've done the upgrade using the netinstall CD, all the packages have been retreived online without errors and I think I've therefore the latest versions.
How to making this F10 box to start ?
View 4 Replies
View Related
Dec 19, 2009
I have just upgraded my F11 x86_64 system using the DVD ISO.
After rebooting as requested:
1) Cupsd fails to start - it can't find libaudit.so.1 (this doesn't worry me in itself).
2) Boot process proceeds until starting hald. This gets an OK response, but then the process hangs. No further output appears on the console. Pressing [ENTER] just causes a blank line to appear on the console. Pressing CTRL-ALT-DEL causes a reboot, and the same symptoms re-occur.
I'm tempted to boot with the rescue disk, save a few critical data directories, then start afresh with a clean install, but is there anything I can do to salvage the upgrade?
View 1 Replies
View Related
May 31, 2010
I've just updated my desktop to F13 using preupgrade but now grub won't boot it. The upgrade seemed to go OK, and none of the disk partitions should have changed as far as I'm aware, but now I get an error
VFS: Cannot open root device "UUID=xxx" or unknown block(0,0).
View 1 Replies
View Related
Jun 21, 2011
I recently upgraded through 'YUM' from Fedora 14 to Fedora 15. The upgrade appeared to be successful until it re booted, ever since then it hangs at
Code:
Started SYSV: Enable monthly update of smolt.
I have downloaded the ISO and burned it to DVD on another system which I used to try to rescue the installation, so far to no avail. My system specs are in my signature below (Laughlin is what I upgraded from).
View 7 Replies
View Related
