Ubuntu Security :: LUKS - Dm-crypt And Encrypted Partition At Boot
Feb 22, 2010
I'm trying to have a LUKS encrypted partition mounted at startup and to have GDM ask for my key so it will decrypt. Now I followed [URL] to the letter. Except for now, I have it just mounted into /mnt/cryptohome so I'm not messing with my system. My problem is the one everyone mentions in the comments, ubuntu isn't asking for the LUKS key in the X display, it's asking in the first terminal (Ctrl-Alt-F1). This will not do. I need it to ask to mount my drive before I'm even asked to login, so eventually I can encrypt my /home.
View 9 Replies
ADVERTISEMENT
Jan 21, 2009
I need a FREE solution that can image an entire Luks system encrypted volume and the rest of the used HDD, the MBR and /boot partition. Note: MBR and /boot are not encrypted. Note 2: I want to be able to restore entire drive from image with only a couple of steps. Note 3: Destination HDD space is a factor. Image file must be compressed and the image file must be around 40 to 50 GB or less. The smaller the image the better.
I have used clonezilla live cd before but not for encrypted volumes. I know you can install it in Linux. But, I don't know how to configure it after installation. I would be very happy if someone could tell me how to configure clonezilla in Fedora. How to guides are also welcome. I have one more question. If I image the encrypted volumes and all the stuff I mentioned above while logged in to Fedora, and I restore the drive from the image, will the recovered drive still be encrypted?
View 8 Replies
View Related
Dec 22, 2009
When I upgraded from FC11 to FC12 of the encrypted raid partitions started to request password on boot (in FC11 not having references to encrypted md1 in fstab and crypttab, was enough for FC11 not to ask for passwords on boot) despite the fact that I removed /etc/crypttab and there is nothing in /etc/fstab relating to encrypted md1 (raid array). I want my machine to boot w/o asking me passwords for encrypted devices, and I will open and mount them myself manually after boot.
View 11 Replies
View Related
May 20, 2010
Anyone had any experience with unlocking a LUKS encrypted root partition via ssh? It is ok to leave /boot unencrypted.
There are a few pages from google with the debians variants, archived by putting dropbear into initrd.
I like to do that with my fedora/centos remote servers, but struggle to find any resources specific to it. Anyone has any suggestions and thoughts as to what might be a suitable way forward?
View 2 Replies
View Related
Oct 4, 2010
I'm simply interested in a more basic discussion of why one would choose one of these methods over the other. What do they offer that the other does not? I'll start with what I know:
- dm-crypt/LUKS
--- included in a lot of install images already; in other words, perhaps easier to implement on a fresh install
- TrueCrypt
--- multiple encryption algorithms possible
[code]....
For me... I have no need for Windows compatibility, though I do use OS X on a dual booting MacBook. I believe TrueCrypt woks with OS X, so that could be a bonus, though I can simply encrypt my home folder on OS X with it's own FireVault and be fine.My setup (after wiping and starting over) will probably be like so:
- /boot on it's own primary partition
- / on it's own primary partition with logical partitions within
--- /usr, /var, /etc, /opt, and the like on a logical partition
--- /home on a logical partition
/home will surely be encrypted and I'm leaning toward encrypting the rest as well, though perhaps it's not necessary. I'm open to input there as well -- is there anything the leaks from normal application use into /var or /tmp that would make one lean toward just encrypting the whole thing?
I opened up TrueCrypt just to look at it and since I can't encrypt a whole partition without losing data... I pretty much have to encrypt from what? A live CD? This could be a drawback -- I think since TrueCrypt isn't coming on install disks, I'd have to go with an unencrypted (or dm-crypt/LUKS) root partition and then use TrueCrypt to make a container (or partition) for /home only. I can't think of another way to do this since I can't encrypt the whole disk as one entity with my dual booting situation...
View 9 Replies
View Related
Apr 4, 2011
I have a perfectly OK 2.5 inch disk drive from a dead laptop (graphics card failed).
The hard drive is fine. I know the passphrase.
I had installed Ubuntu 10.04 with full fisk encryption using dm-crypt/luks using the alternate install cd.
I'm not exactly sure of the configuration I selected. Just that its full disk encryption with a pre-boot passphrase prompt.
Now my issue is, I have put the drive into a usb drive docking station, and I simply want to mount the partition on my new laptop, so I can copy the files over.
I've tried googling for various things like "mount dm-crypt drive linux" and "how to mount a luks encrypted partition linux", but I get no results.
View 4 Replies
View Related
May 27, 2010
I'm having a problem auto-mounting a new luks partition. I have crypttab and fstab entries. I already have my primary encrypted partition (root) mounting at boot (from the install), but after creating this one manually, it does not open on boot. It auto-mounts when I run the following command manually after boot: sudo luksOpen /dev/disk/by-uuid/<uuid> mycrypt
/etc/crypttab entry:
personalcrypt /dev/disk/by-uuid/a1af5b7b-db58-4690-b586-b74407795e2c none luks
/etc/fstab entry:
[code]...
View 1 Replies
View Related
Jul 17, 2011
I managed to setup an encrypted partition that's mounted on boot using dm-crypt/LUKS.
The relevant entry from my /etc/fstab:
/dev/mapper/st_crypt /media/st ext4 defaults 0 2
The partition is mounted at boot, and I can write to it as root just fine, but I have no idea how to make it writable by a normal user (i.e the users group).
View 1 Replies
View Related
Aug 10, 2010
It seems I've run into a bit of a problem. I recently upgraded to the latest kernel 2.6.32-24-generic (x86) but when I reboot into the new kernel and type in my password the system hangs, same when using a keyfile on the root file system.to give an outline of how the disks are setup.3 hard drives
sda1 / = unencrypted
sdb1 /home = encrypted w/ luks
sdc1 /backup = encrypted w/ luks
When i boot to the original kernel 2.6.32-21 I'm able to successfully get into the system.
View 1 Replies
View Related
Jan 3, 2010
I'm just wondering - what is the best way to set up your encrypted volumes with dm_crypt and LUKS?
My understanding was that aes-lrw ws better than aes-cbc - and then I stumble upon [url] which says that LRW has some problems, and XTS is better? I dont know enough about encryption theory to be able to say anything, so i'm hoping some folks more enlightened will be able to say something here.
I was previously using aes-lrw-benbi to set up a volume. If xts is truly better - should i be using '-c aes-xts-benbi' then?
View 4 Replies
View Related
Mar 9, 2011
Has anyone tried encrypting the boot partition to prevent the kernel from being modified. Iv tried following this but I'm running into issues when building. [URL] Im using the source from bzr checkout [URL] Last time I tried I screwed grub and it wouldnt boot.
View 9 Replies
View Related
Jun 30, 2010
I have a really tricky and may be intresting problem with a encrypted disk partition (cryptsetup luks...) which was fine until it accidentally got re-formatted by an instance of Windows 7. Most of the data on that 1TB-disk will probably still exist, only the LUKS header at the very beginning of the partition is - of course - gone.
So when I try to open the container, it gives no verbose, just the return value 234.
I scanned the whole partition for other LUKS headers with hexedit, none there. But, luckyly I have another partition which is encrypted in the exact same way with the exact same passphrase (which I remember very well!), so I had an idea: I copied the LUKS header (592 bytes) from the other LUKS encrypted partition over to the damaged partition.
When I now issue
Code:
Code:
No key available with this passphrase
Here is the command how I created the container:
Code:
How do I get the existing passphrase accepted by LUKS?
View 9 Replies
View Related
Aug 18, 2010
I run fedora 13 on my laptop (dual boot with Windows 7) and I just created a new partion to hold sensible data, encrypted with LUKS. I followed this tutorial for creating it.Now, everything went well and the new partition works well. But I needed something a little different from what the tutorial suggested, because I don't want the partition to be mounted on the system each time it boots, but I would (unlock and) mount it manually when I need it.
To do so I just didn't follow the Tutorial steps from 7 to 13, thinking that without the changes to crypttab and fstab the partition wouldn't be even touched by the start up process. And that's partially true: the partition isn't mapped nor mounted in the system when I boot, but the problem is that it however keeps asking for the passphrase to unlock it even if it doesn't get mounted or mapped.It just asks for it before the system loads all it's parts (udev, filesystems, etc) and I can't understand why, what it uses it for if it doesn't unlock it.So my question is: why does it ask for the passphrase to unlock luks if I haven't set crypttab and fstab to mount the partition on start up?
View 2 Replies
View Related
Feb 1, 2016
I have two basically identical harddrives that are encrypted with LUKS containing a complete debian installation:
Code: Select allroot@x200s:/home/b# lsblk --fs
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ext2 0b851969-281e-4db2-8a5b-3798e801711b /boot
├─sda2
└─sda5 crypto_LUKS cfcf63ef-448a-4f72-9f58-8f7731cf3dfc
└─sda5_crypt LVM2_member 21CS3f-SQeQ-XcMr-kyDs-OPtR-egmT-HkvJAu
[Code] ....
sda is what I currently run to write this text, sdb is my former harddrive, connected via USB.
I want to access the root partition on sdb.
The problem is:
Code: Select allcryptsetup luksOpen /dev/sdb5 oldhd
Enter passphrase for /dev/sdb5:
root@x200s:/home/b# ls /dev/mapper/
control oldhd sda5_crypt x200s--vg-root x200s--vg-swap_1
root@x200s:/home/b# mount /dev/mapper/oldhd /mnt/
[b]mount: unknown filesystem type 'LVM2_member'[/b]
[Code] ..
Before all this, both sda and sdb where in the same volume group. I renamed the volume group of sdb to "oldDisk"
using
Code: Select allvgrename <UUID> oldDisk
How I can access the data on the root filesystem of my sdb..
View 2 Replies
View Related
Nov 8, 2009
I need to access /etc/modprobe.d on an encrypted LVM LUKS partition. I m not sure how to go about it though. Mount usually handles my mounting needs, do I need to decrypt the physical volume first? LIst of commands need would make my day.
View 1 Replies
View Related
Aug 30, 2010
I have encrypted a partition while installing Fedora 13, and I need to disable its automount - I will mount those manually.
But even though I commented out the corresponding line in /etc/fstab, I am still asked for the passphrase for the partition at startup.
How to completely disable this behaviour - and how to mount the partition manually afterwards?
View 5 Replies
View Related
May 16, 2011
I need to move a LUKS encrypted partition to the end of a harddrive to expand another partition. Does anyone know how to do this?
Is it possible to do this with other partition editing programs?
Gparted doesnt support LUKS/LVM
View 1 Replies
View Related
May 15, 2010
Since i'm on-the-road a lot encryption is crucial, with windows i've always used TrueCrypt and DiskCryptor, this is very easy to setup and allows me to create usb/cd devices that i can boot off and contain a keyfile, on boot it also requires a passphrase. Currently all i need to do is boot from harddisk and enter my passphrase. I would like to be able to boot from external device (in this case USB) that contains the bootloader and an integrated keyfile, also it should requist the passphrase. I found a guide on how to achieve two-factor authentication with dm-crypt on feisty but it's quite an old guide and is realy realy complicated for a newbie
View 1 Replies
View Related
May 26, 2011
I have a setup that looks like this
[Code]....
and I'm dumped into recovery mode. However, if I remove these mounts from /etc/fstab via comments, I can wait for the system to boot (which it does very quickly) then mount the mapper devices myself. So what is going on? Has something changed wrt logical volumes, or is this just systemd? I can live with manual mounting, but any advice on resolving the automatic mounting situation would be great.
[Code]....
View 2 Replies
View Related
May 10, 2010
I have a LVM logical volume, that contains a LUKS encrypted volume, on which is an ext4 filesystem. I shrank the partition to the minimum size. Next step is to luksClose the device, and then to resize the LVM logical volume. I suspect that LUKS has overhead. So if the ext4 filesystem was resized from, say 1TB to 500G, I have the idea that resizing the LVM LV to 500G does not take LUKS overhead into account and this might corrupt data on the end of the FS. So, what's the smart move to take? How do I calculate the safe minimum LV size? Or should I just give the 500G disk a few gigabytes extra to be sure?
View 4 Replies
View Related
May 9, 2011
if encrypt my root partition with Luksformat on my laptop and the battery suddenly goes out without a proper shutdown, I stand a big chance on corrupting the luks header or key slot?
View 1 Replies
View Related
Jul 19, 2010
I'm planning a fresh F13 install, with separate partitions for /boot, /home, /tmp, /, and swap. All but /boot will be logical volumes, and I'd like to encrypt all but boot. If I encrypt the underlying partitions, is there any reason to also encrypt the logical volumes themselves?
my system will be:
HP dv6-3040us Pavillion laptop
AMD Phenon II
4GB DDR3
View 3 Replies
View Related
Jan 4, 2010
Is there anyway to decrypt some plain text which was encrypted using the function crypt()?
View 3 Replies
View Related
Apr 26, 2010
While setting up my laptop on a new hard drive (a bad mobo caused writes which pretty much rendered teh old hdd unusable) I was asked if I wanted to encrypt my home partition.
I've been wanting this for several years - even going as far as trying to get a copy of CheckPoint. That's waht my organization uses on all Wintendo laptops and is required.
In any case, I said "yes" and am happily using my laptop with an encrypted home partition. I'm assuming based on this - [URL] - that it is using EncryptFS as the scheme.
if I were to misplace my laptop, how easy would it be for a forensics team to retrieve my data. Let's assume I have a fairly strong passphrase, such as BisZumBitterenEnd3. [URL]
View 5 Replies
View Related
May 3, 2010
I had some major problems after the recent Ubuntu upgrade and had to boot from a live cd. I have a separate /home partition, but it was encrypted using the default install encryption in the 9.10 install cd. How can I get to my files so I can back them up?
I have tried this but it did not work: http://ubuntuforums.org/showthread.php?t=1337693
View 9 Replies
View Related
Apr 8, 2011
I have to operating systems installed, Ubuntu 10.10 and Windows 7, working perfectly. I also have a partition, currently empty, to be shared between both OS, but I would like that partition to be encrypted.
View 2 Replies
View Related
Feb 25, 2010
I have recently recovered from an HDD failure on my Drobo. One of the disks died and corrupted the entire array (which is not supposed to happen). I have since managed to copy the data off onto smaller disks and after replacing the failed drive, have copied everything back.
Now that im up and running again, i was wondering how this situation would play out on encrypted disks, or in the case of a drobo a large encrypted partition (as you cannot encrypt the entire array).
Would i still be able to recover the data if i were to encrypt it? It is a 4.2TB array, and i assume that I would need to copy the data in its entirety to recover it, so using multiple smaller disks would be out of the question right?
View 5 Replies
View Related
Apr 11, 2010
What are the steps I must take to move my existing home folder to a separate, encrypted partition? Can I create this partition without damaging my current partition? Where is a trusted location to download App Armor profiles? What else can I do to harden the security of Ubuntu?
View 1 Replies
View Related
Sep 20, 2010
Hello everI'm really confused by the ways an encrypted partition get mounted.It just mounts the partition without asking for the passphrase used to create it. I can list the files in /mnt/sda2, create a new file test.txt, but have no access to the files written to the "real encrypted partition".Then I can see/change the content of the encrypted partition but without being able to see/change the file test.txt created previously with the normal mount command.
The reason I'm asking is that I'm having my custom Debian to automount every partition available on the system at boot time. Is there any way/command to tell if a particular partition is encrypted (by cryptsetup) or not? So that I can mount it the right way and not make the users confused (or even harm the encrypted data).
View 6 Replies
View Related
Oct 18, 2010
I can't seem to get an encrypted partition to recognize a keyfile. It is a backup partition that I would like to keep unmounted until a cron-script runs once a week to backup my sensitive data. In order for the script to run without my assistance, I thought I'd use a keyfile to authorize the mount.
So far I've created a keyfile and have added it to the partition using "luksKeyAdd". It didn't really say it was successful, but when I do a luksdump, it shows that another key slot has been enabled, so I believe it worked. After that I created a /etc/crypttab file with the following:
Code:
backup_sdd1 /dev/sdd1 /root/backup luks
/dev/sdd1 being the backup partition, and /root/backup being the keyfile
After rebooting, I am still prompted for a password when trying to mount the encrypted partition (sdd1), and there is no device "/dev/mapper/backup_sdd1" created like I believe there should be. I haven't added any entries to fstab, as I don't want this partition to mount at boot.
View 5 Replies
View Related
