I have searched google but cannot find exactly what I need. I have an external usb stick that is encrypted and always plugged in. On boot i want to it automatically be mounted (so I don't have to go to places and click on it and enter the decryption phrase)
View 3 RepliesI have encrypted a partition while installing Fedora 13, and I need to disable its automount - I will mount those manually.
But even though I commented out the corresponding line in /etc/fstab, I am still asked for the passphrase for the partition at startup.
How to completely disable this behaviour - and how to mount the partition manually afterwards?
First off I'm new to the openSUSE community and would just like to say So, to the issue at hand. I recently switched to openSUSE 11.4 from Debian. I noticed the setup didn't have an option encrypt the home folder like it does in Debian, so not being aware of any other way to encrypt it, I created a new partition, backed up my current home directory, created a new partition and mounted it as home before copying in the contents of the backup to the encrypted home partition I created. Now of course it is askingme to put the crypto password in at each boot, which isn't ideal because it's a family machine and no-one would remember the password but me. Is there any way of being able to automount the encrypted partition without having to put the key in every time? Or better yet an encrypted home folder that doesn't require the key to be put in on each login (as in Debian) without even using a dedicated partition.
View 4 Replies View RelatedI'm trying to automount my encrypted Windows partition in Slackware-Current.
With help from the Gentoo wiki, I came up with this script:
Code:
Then I added this to my fstab:
Code:
I get this error when I try to mount my partition (as root):
Code:
Error: Unable to initialize gtk, is DISPLAY set properly?
But if I run my script like this (exactly how mount runs it), it works fine:
Code:
New script
Code:
I have an external 300GB (Toshiba) disk which I encrypted (using cryptsetup luksFormat) and then installed an NTFS filesystem on (need to be able to use it in both Linux and Windows - using FreeOTFE). The disk mounts fine in windows and on my Fedora 10 system it automounts.
I can manually mount it on the RHEL5.3 system, and gnome-mount gets as far as recognising that it is encrypted and asking for the key, but it doesn't then mount it - I then have to manually mount the /dev/mapper/luks... device.
Does anyone know how to do this - if it works in Fedora 10 it ought to be possible to get it to work in EL5.3 I'd have thought.
How can I get a LUKS encrypted partition on an external USB device automounted with r/w access for non-privileged users?
Background:
I just reformatted an external USB device with ext4. The only partition is LUKS encrypted. Now, when I plug the device to my computer, KDE notifies me and asks me to enter the LUKS passphrase. Then it mounts the device. Little snag here: Non-privileged users have read-only access.
My user is a member of group plugdev, but not of group disk, as this was discouraged several times, e. g. by Robby Workman. With non-encrypted disks regular users have read/write access, or can change the filemodes accordingly, as far as I recall (currently I have no more non-encrypted disks left to verify it...)
I'm trying to get some of my NAS storage to mount on my xubuntu 10.04 box at boot time. I have it in fstab, and when I run
$sudo mount -a
it mounts just fine. However, I have to run that manually, I can't get it to just mount at boot time. Here's the entry from my fstab: [URL] So like I said, manually running mount -a works fine, I just can't get it to do it automatically at boot time. I feel like the auto option should take care of that, and that's what I've read around here, but it's just not working.
i recently deleted a NTFS partition while ubuntu was running and didnt disable the automount and when i tried to restart from what i can see it is trying to mount the partition which does not exist. When booting it says something to the effect of mounting dev/sda5 (which is now ubuntu) NTFS signature incorrect, what file must i change to allow ubuntu to boot because i kind of dont want to reinstall ubuntu and reconfigure it.
View 1 Replies View RelatedI just discovered that automounting a fat32 partition (which i keep for exchanging file between Ubuntu & Win) slows down my boot time, from around 25secs to 1 minute. It does not behave in the same way for a ntfs partition (the vista partition itself).
Here it is my fstab:
Code:
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda3 during installation
UUID=6b0de3ef-fea6-4be4-b60e-1926db6aacaf / ext4 errors=remount-ro 0 1
#/media/data was on /dev/sda5 during installation
UUID=01AF-17F4 /media/data vfat utf8,umask=007,gid=46 0 1
[Code]...
My Lucid LTS Ubuntu Studio 64 (amd) won't boot anymore; / and /home each are software raid 0 partitions.
I have a Multimedia partition (also ext 4) which I attempted to chmod with a GUI program (I forget what its called now) to enable all users read/write access. Looks like I inadvertantly fstabed that partition to be mounted at boot-time (normally my password was required in order to mount it).
I tried to logging out and back into my OS to see if the partition was now writable but it wasen't; instead a filesystem error was noted. I realised then that my partition was IMPROPERLY labelled and I was in a tired state and didn't remember how to rename it & rebooted to make sure all was ok. But it was not:
An error occured when mounting /media/Ubuntu unknown filesystem type "Multimedia"
mountall: mount /media/Ubuntu [1334] terminated with status 32
mountall: filesystem could not be mounted /media/Ubuntu
Boot: recovering journal
From my generic Ubuntu system on a non raid partition, I finally removed the space in the 'offending' partition: Ubuntu Multimedia to UbuntuMultimedia. And I changed the permissions for it. But if I try to boot Ubuntu Studio via recovery; booting in low res is unusable, and it gets stuck if I SKIP mounting. So I am left with manual boot or drop to a shell. I will have to use an editor like vi or nano and the command prompt. I know that I likely only have to comment out a line in /etc/fstab but I am only familiar with nautilus or gedit for this type of operation. And since this OS is on a raid partition its not 'seen' on the live CD..I would need someone to offer me clear steps to follow with the non gui editors otherwise I'm in trouble... I just wanted to use that partition for video editing and now I am locked out of my system!
i recently deleted a NTFS partition while ubuntu was running and didnt disable the automount and when i tried to restart from what i can see it is trying to mount the partition which does not exist. When booting it says something to the effect of mounting dev/sda5 (which is now ubuntu) NTFS signature incorrect, what file must i change to allow ubuntu to boot because i kind of dont want to reinstall ubuntu and reconfigure it.
View 3 Replies View RelatedMy Lucid LTS Ubuntu Studio 64 (amd) won't boot anymore; / and /home each are software raid 0 partitions.
I have a Multimedia partition (also ext 4) which I attempted to chmod with a GUI program (I forget what its called now) to enable all users read/write access. Looks like I inadvertently fstabed that partition to be mounted at boot-time (normally my password was required in order to mount it).
I tried to logging out and back into my OS to see if the partition was now writable but it wasen't; instead a filesystem error was noted. I realised then that my partition was IMPROPERLY labelled and I was in a tired state and didn't remember how to rename it & rebooted to make sure all was ok. But it was not:
An error occured when mounting /media/Ubuntu unknown filesystem type "Multimedia"
Boot: recovering journal
From my generic Ubuntu system on a non raid partition, I finally removed the space in the 'offending' partition: Ubuntu Multimedia to UbuntuMultimedia. And I changed the permissions for it.
But if I try to boot Ubuntu Studio via recovery; booting in low res is unusable, and it gets stuck if I SKIP mounting. So I am left with manual boot or drop to a shell. I will have to use an editor like vi or nano and the command prompt. I know that I likely only have to comment out a line in etc/fstab but I am only familiar with nautilus or gedit for this type of operation. And since this OS is on a raid partition its not 'seen' on the live CD....
I would need someone to offer me clear steps to follow with the non gui editors otherwise I'm in trouble...
I just wanted to use that partition for video editing and now I am locked out of my system!
If you want, skip straight to the 'QUESTION' at the end of my post & refer to the 'EXPLANATION' later. EXPLANATION: Using Debian 6.01 Squeeze 64-bit. Just put together a brand new 3.3Ghz 6-core AMD. I had a nightmare with my Highpoint 640 raid controller, apparently because Debian Squeeze now handles raid through sysfs rather than /proc/scsi. The solution to this, of course, is to recompile the kernel with the appropriate module for /proc/scsi support. So I thought "screw that" and I've yanked out the raid card & went with Debians software raid. This allowed me to basically complete my mission. The raid is totally up and running, except for one final step... I can't get the raid to automount at boot.
My hardware setup;
- Debian is running totally on a 64Gb SSD. (sda)
- I have 3x 2Tb hard drives used for storage on a raid 1 array (sdc,sdd,sde)
[Code]....
After a new Fedora 12 installation, i cannot automount my Windows partition. My system is setup originally at windows XP ,partitioned, then change to Fedora 10. Change to Fedora 11 through update.System very slow.
I decided to upgrade to fedora 12 by DVD installer, then i have to mount manually to access my back-up, when typing su -c '/sbin/fdisk -l' at terminal, this is the code:
I installed Ubuntu 10.10 64 on my laptop with the entire 500gb setup as encrypted LVM. This has worked well for several months with no problems. During this time i have been backing up the data to an external usb drive (1tb) on a regular basis. The usb drive was not encrypted. So, I thought it would be a good idea to encrypt the backup drive too. I wiped out the backup drive and set it up as one large encrypted lvm and mbr. This seemed to work fine but immediately afterwards I decided to erase that and set it up as encrypted lvm guid instead of mbr. I couldn't delete it while logged into my desktop so i decided to do it from a bootable gparted usb stick. In gparted i erased the 1TB backup drive once again and planned on setting it up the way I wanted once I was logged back into my ubuntu desktop. Now I cant boot into my desktop with the following errors:
cryptsetup: evms_activate is not available b0d) does not begin with /dev/mapper/
Then after waiting for a few minutes I get an error followed by (initramfs)
When booting from a live version of ubuntu the 250MB boot patition is recognized and 500 partion is there but it is labeled as empty/unused.
Also, I did choose to use the exact same passphrase as what is used on the main bootable drive when I set up the encrypted partition on the external 1TB drive.
I have XP on sda1, Fedora 11 encrypted on sdb 1 (boot) and sdb 2 (root), I would like Ubuntu on sdc 1 (boot) sdc 2 (root). However when I tried to install from the cd the partition manager does not see my Fedora as an OS (I assume because it is encrypted). So my question is how can I achieve my triple boot without having to have my Fedora unencrypted. I want it encrypted for a reason.
Also I cancelled the installation for Ubuntu and it reverted to a Live cd and I tried to mount my Fedora encrypted drive. Ubuntu asked for the pass and when I entered it I get an error saying it cannot be mounted because it is not a mountable file system. This is not good for me because I would like to be able to access all my hdd's from both distro's.
Times like this Ubuntu makes me want to pull my hair out. When I enter my pass on the login screen, it brings up a "Could not update ICEauthority file" error and then goes to a black screen. I've tried to fix this problem for the past 2-3 hours (searching google, these forums, etc) and at this point, I just want the data off my drive so I can restart with a fresh install of Ubuntu. I used the "gsku nautilus" command to mount the disk from a Ubuntu Drive boot, but it's not letting me have access to the encrypted drive. Does anyone know of a work around for this?
View 1 Replies View RelatedIve managed to screw up an encrypted disk experiment, basically at boot i get ask to enter my password which i lost.
Only a data partition is encrypted, the linux system is unecrypted.
However, the skip option thats presented that should work via S does not work. every key in input adds one * behind the password prompt.
The password prompt changes from white to red though. as if in the white phase you should be able to skip.
Im to lazy at the moment to swap the drive and comment the drive in fstab
I already booted in single, but still the mount occours. is there another way to get the system booting?
ubuntu server 10.04
Is there a walk through guide for manual encrypted LVM creation? I tried once, but I didn't do it correctly.I have a partion that has windows 7, currently. I am trying to install ubuntu on an encrypted partiton, next. /boot needs to be unencrypted, but the swap and root partitions can be?
View 1 Replies View RelatedI've just started using ubuntu one. However, some of the files I store on there are sensitive so I encrypt them using seahorse. Right click, encrypt etc etc. My question is, is there a way to automatically get the encrypt process to delete the un-encrypted file when it makes the new encrypted copy?
View 6 Replies View RelatedI want to have /boot as an ext2 (I don't need journaling and I might want to undelete something) and all other partitions in an LVM.When the server starts it will prompt me for the LVM password. I would like to be able to contact the server using SSH (or using another secure method) and tell the password. Since /usr/sbin and all the other partitions are inside the LVM I guess I have a problem?
Is it possible to setup something like this? The SSH session for the LVM authentication does not have to be a daemon. It can be something which just sits and waits until I connect and input the password. And then the "real" SSH deamon kicks in.
I've installed Squeeze on a USB stick, but can't get it to boot. I've had this problem before and gave up last time. I installed on an encrypted LVM - here is the grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
[Code]...
I added rootdelay=10 and switched root from hd1,1 to hd0,0 as suggested elsewhere. Still no go, i jsut get dumped into ramfs shell with an error message saying that /dev/mapper/crunchbang-root doesn't exist.
I'm trying to have a LUKS encrypted partition mounted at startup and to have GDM ask for my key so it will decrypt. Now I followed [URL] to the letter. Except for now, I have it just mounted into /mnt/cryptohome so I'm not messing with my system. My problem is the one everyone mentions in the comments, ubuntu isn't asking for the LUKS key in the X display, it's asking in the first terminal (Ctrl-Alt-F1). This will not do. I need it to ask to mount my drive before I'm even asked to login, so eventually I can encrypt my /home.
View 9 Replies View RelatedI'm having a problem auto-mounting a new luks partition. I have crypttab and fstab entries. I already have my primary encrypted partition (root) mounting at boot (from the install), but after creating this one manually, it does not open on boot. It auto-mounts when I run the following command manually after boot: sudo luksOpen /dev/disk/by-uuid/<uuid> mycrypt
/etc/crypttab entry:
personalcrypt /dev/disk/by-uuid/a1af5b7b-db58-4690-b586-b74407795e2c none luks
/etc/fstab entry:
[code]...
I've installed Ubuntu 11.04 on a Fujitsu Esprimo E900. During installation, I've used the guided encryption setting because neither GRUB nor LILO would ever install on the LVM configurations I created myself. So after installing Ubuntu 11.04, when I boot regularly, the computer freezes completely. When I try to launch the recovery mode kernel, I get this far and then the computer locks up, too. Ubuntu lockup during boot by germanium, on Flickr
You can see the label is sdb5_crypt which is a bit odd since the partition is on /dev/sda. However, I already tried changing grub.cfg to /dev/sda instead of /dev/sdb but that didn't do anything. This is all a bit odd to be. The funny thing is I've been trying to set this computer up for a month and I'm a professional programmer (Java, JavaScript, Groovy) with 20 years of programming experience and I never thought Ubuntu would be this hard to install on a more-or-less stock Intel box.
I haven't used encryption previously but through that for better security, I would enable it on one of my disks. I went though the process and when done, copied data to the device etc. My house had a powercut the other day and I noticed that the device did not mount automatically upon restart. Unfortunately, I have forgotten the de-cryption password and have lost access to my data. Is there a way of either recovering my password or getting the partition to mount without the password so I can access the data, copy/back up and then re-create the partition without encryption?
View 2 Replies View RelatedI was running Ubuntu 9.04 Desktop on a headless Pentium 4 machine which is our file, mail, web & fax server. The two x 250GB SATA hard disks were in a RAID 1 array with full disk encryption. Ran the 9.10 upgrade via WEBMIN and it failed. I should have known then to copy over everything to a backup disk, but instead I rebooted.
On restart the machine accepted my encryption passphrase but promptly hung with a mountall symbol lookup error - code 127. So I can't start the machine to get at the disks, and using a Live CD is useless as it has no way to open the RAID array to get at the encrypted partitions. Although we have data backed up (as at last night) I'd hoped not to have to rebuild the entire server from scratch. But its looking bad.I have taken one drive out and plugged it into another machine (Hercules), and the partitions show up as /dev/sdb1 /dev/sdb2 /dev/sdb3.
If it weren't for RAID, I could open /dev/sdb2 the main partition) in Disk Utility and enter my encryption passphrase to get access. But RAID adds a layer of obstruction that I have not yet overcome. I used mdadm to scan the above partitions and created the /etc/mdadm.conf file, which I edited to show the 2nd drive as missing (rather than risk corrupting both drives). I activated the RAID array with mdadm, and cat shows:
Code:
root@HERCULES# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sdb3[0]
1815232 blocks [2/1] [U_]
[Code]...
I've been searching the web for hours but have yet to find someone with a solution to this situation. If anyone has a thought on how to access this disk I'd be pleased to hear from you. In the meantime I will start building a new (9.10) machine from scratch, without RAID, 'cos that's probably going to be necessary.
I just upgraded my F9 system to F10 using they preupgrade method, and though nothing seems to have failed during the upgrade I can't boot my system any longer.I have a completly encrypted system, and so I need to enter a passphrase at boot. The new F10 system does boot and I do get a Password: prompt but the passphrase is not accepted.My passphrase doesn't contain any odd characters to prevent problems with keyboard mappings. Just plain letters (upper and lower case) and digits
View 9 Replies View RelatedI just upgraded my OpenSuSE 11.2 system to 11.3 and have experienced the following problem:
My hard drive was encrypted beforehand, and after the upgrade(which went smoothly) will no longer decrypt. I type in my passphrase at the prompt, press enter and the start up process never resumes. I am able to access the filesystem from the Rescue System option in the install disk. What's strange is that this worked smoothly on another laptop of mine.
I've installed opensuse 11.4 by doing a network install, (boot off kernel + initrd, everything else is fetched off network) and i skipped the bootloader part because i've already got two other linux systems set up with grub2 on my computer. I picked the minimal server install (text mode) and didn't make any other software selectiono changes.
My partition layout is as follows
ssd drive contains / partitions for distributions (GPT layout) hdd drive contains encrypted lvm PV (PV on a luks partition). inside that PV is a VG with volumes for /home and /var (and other), where each distribution has its own /var.
The problem is that i cannot get initrd to open the luks properly. i tried chrooting, rebuilding the image with mkinitrd -f "lvm2 luks" ( i saw that somewhere on opensuse wiki, i think ) and adding boot parameters like this : lvm_box=/dev/disk/by-uuid/<luks partiiton UUID> lvm="box" (where box is the name of the lvm array).
[Code]...