Ubuntu Installation :: Complete Lockup During Boot From Encrypted Volume
Aug 1, 2011
I've installed Ubuntu 11.04 on a Fujitsu Esprimo E900. During installation, I've used the guided encryption setting because neither GRUB nor LILO would ever install on the LVM configurations I created myself. So after installing Ubuntu 11.04, when I boot regularly, the computer freezes completely. When I try to launch the recovery mode kernel, I get this far and then the computer locks up, too. Ubuntu lockup during boot by germanium, on Flickr
You can see the label is sdb5_crypt which is a bit odd since the partition is on /dev/sda. However, I already tried changing grub.cfg to /dev/sda instead of /dev/sdb but that didn't do anything. This is all a bit odd to be. The funny thing is I've been trying to set this computer up for a month and I'm a professional programmer (Java, JavaScript, Groovy) with 20 years of programming experience and I never thought Ubuntu would be this hard to install on a more-or-less stock Intel box.
View 2 Replies
ADVERTISEMENT
Jan 1, 2016
I just installed Debian Testing on an encrypted partition (using the encryption feature in the installer). Problem is when I boot I enter the passphrase and then Debian starts to load a bit and then it stops and won't move again. During a normal boot the boot stops after : EDAC sbridge : Couldn't find mci handler Then do a recovery mode boot from grub loader so more information is displayed during the boot time and it stops after : [12.513770] fb: switching to nouveaufb from simple it stops there I can't type anything, I can reboot the computer with ctrl+alt+del tho
I was booting just fine in a previous installation on a MBR-partitioned disk (now it's GPT-partitioned). I have to add that during installation I added a second encrypted volume on a HDD (while / is on a SSD) that mounts to /data. When few days ago I installed it on the MBR-partitioned disk it asked me for the /data passphrase pretty fast, now it just seems to boot and asks me only one passphrase until it freezes.
View 1 Replies
View Related
Jul 16, 2010
I have been running 11.2 32bit on my IBM T43 laptop without issue. Tonight I downloaded 11.3 32bit and installed to HDD. On reboot into new system laptop has complete freeze. Can not do anything but power off to reboot. I also found the same situation if I try to run KDE live off the cd. Oh yes, I downloaded the openSUSE 11.3 KDE Live CD version.
So here is what I found. On bootup (either HDD install or Live CD desktop) I will goto to tty1 or tty4 to see the boot up process messages. And it get right up to the login prompt without issue. If I then switch back to tty7 (the normal bootup display) after a few seconds the screen and laptop itself completely lockup (freeze). So I power off to reboot.
this time I boot up in tty1 again until login prompt but this time I type root to login. Then I switch to tty7 and now I can see the desktop. I goto the menu to search and load up Kinfocenter but then its freezes again.
So its very frustrating as I can not use this new version of openSUSE on my laptop. It just keeps freezing. Whats worse is I cant see any logs or screen message in tty1 because once it starts to login to desktop it freezes. So I am not even sure how to troubleshoot any further what the issue is. I assume its KDE4 or XOrg server.
View 9 Replies
View Related
May 8, 2011
Alternate CD on USB - Natty not mounting Encrypted Volume I get initramfs prompt. I have a Dell Inspiron Duo. I've tried to install Natty i386 and AMD64. I set my / (root) and swap under LVM under an encrypted volume. Used manual partitioning. But after reboot, I successfully enter the passphrase, swap and root are not mounted.
Now, I've had this working with 10.10. System seemed a little quirky after the upgrading it to Natty. So, I wanted a fresh install. Used Unetbootin to run ISO from USB and also from one of my other partitions. I've tried installing at least 10 times, some repeat, some variations.
View 1 Replies
View Related
Jan 21, 2009
I need a FREE solution that can image an entire Luks system encrypted volume and the rest of the used HDD, the MBR and /boot partition. Note: MBR and /boot are not encrypted. Note 2: I want to be able to restore entire drive from image with only a couple of steps. Note 3: Destination HDD space is a factor. Image file must be compressed and the image file must be around 40 to 50 GB or less. The smaller the image the better.
I have used clonezilla live cd before but not for encrypted volumes. I know you can install it in Linux. But, I don't know how to configure it after installation. I would be very happy if someone could tell me how to configure clonezilla in Fedora. How to guides are also welcome. I have one more question. If I image the encrypted volumes and all the stuff I mentioned above while logged in to Fedora, and I restore the drive from the image, will the recovered drive still be encrypted?
View 8 Replies
View Related
Aug 10, 2010
It seems I've run into a bit of a problem. I recently upgraded to the latest kernel 2.6.32-24-generic (x86) but when I reboot into the new kernel and type in my password the system hangs, same when using a keyfile on the root file system.to give an outline of how the disks are setup.3 hard drives
sda1 / = unencrypted
sdb1 /home = encrypted w/ luks
sdc1 /backup = encrypted w/ luks
When i boot to the original kernel 2.6.32-21 I'm able to successfully get into the system.
View 1 Replies
View Related
Jun 11, 2009
I downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
View 11 Replies
View Related
Apr 27, 2010
I am trying to install SuSe 9.3 from a Live CD onto an old laptop, and the base installation completes but the boot does not finish. It stops at the following:
Waiting for device /dev/hdc5 to appear: ......resume device /dev/hdc5 not found (ignoring)
Loading kernel/fs/reiserfs/reiserfs.ko
Waiting for device /dev/hdc1 to appear: ...... not found -- exiting to /bin/sh
sh: can't access tty; job control turned off
$
Hardware is: Sony Vaio PCG FX205K, 128Mb RAM, 850MhZ, 20G Hard drive.
View 5 Replies
View Related
Mar 27, 2010
Uninstalled wubi (though I enjoyed Ubuntu I want to do a clean install instead of the wubi/windows piggy-back). However, I still get an option to choose ubuntu when rebooting. I know that there's something I need to delete in the boot.ini file, but all I read is "delete mentions of ubuntu" or "delete the ubuntu line".
I hope I'm understandably wary of just waltzing into the boot file and deleting something like this, so what exactly do I delete from the boot.ini file to complete the uninstallation?
This is what I have in the boot file:
Code:
So all I delete is the "C:wubildr" line? Or does all that do is remove the mention of ubuntu from the startup menu but I still need to choose XP as the OS I want to boot into during startup?
View 2 Replies
View Related
Jul 30, 2011
I cannot boot into Ubuntu at all. I have two kernels installed, 2.6.35-28 and 2.6.35-30. The first thing that happened today was that I wasn't able to boot into the latter. I was shown the (in)famous "BUG: soft lockup - CPU#0 stuck for 61s". At this point I could still boot into the 2.6.35-28 kernel. But after shutting down and starting again an hour later, I got the same message when trying to boot into 2.6.35-28. I have tried leaving out the boot options "splash" and "quiet" on both kernels and also adding in "noapic". No combination helps. Needless to say, booting into recovery mode doesn't work either. Up until today, I have been able to boot into both kernels with no problems.
View 1 Replies
View Related
Jan 3, 2010
I have XP on sda1, Fedora 11 encrypted on sdb 1 (boot) and sdb 2 (root), I would like Ubuntu on sdc 1 (boot) sdc 2 (root). However when I tried to install from the cd the partition manager does not see my Fedora as an OS (I assume because it is encrypted). So my question is how can I achieve my triple boot without having to have my Fedora unencrypted. I want it encrypted for a reason.
Also I cancelled the installation for Ubuntu and it reverted to a Live cd and I tried to mount my Fedora encrypted drive. Ubuntu asked for the pass and when I entered it I get an error saying it cannot be mounted because it is not a mountable file system. This is not good for me because I would like to be able to access all my hdd's from both distro's.
View 1 Replies
View Related
Apr 2, 2016
tcplay [URL] ....
Want to make a 1gb volume on dev/sdb usb memory stick.
Wrote
Code: Select allsudo tcplay --create --device=/dev/sdb --pbkdf-prf=SHA512 --cipher=TWOFISH-256-XTS,AES-256-XTS
Command has to be sudo?
Got
Code: Select allPassphrase:
Repeat passphrase:
Summary of actions:
- Completely erase *EVERYTHING* on /dev/sdb
- Create volume on /dev/sdb
Are you sure you want to proceed? (y/n)
I do not want the usb stick to be erased. What do I do, to not erase the usb stick? If you create a volume on the system hdd, it should not erase the system.
View 0 Replies
View Related
May 3, 2010
I recently installed Ubunutu 10.04 Netbook Remix onto a Dell Vostro A90. During install I selected "Require my password to log in and to decrypt my home folder", and this is working great.
What I would like to figure out, is how to have a second encrypted volume that lives on my SD Card that is also decrypted automatically upon login.
I've tried a variety of things, but they all require me to re-enter my password at some point during the boot/login, once for user login and the other time to decrypt/mount the volume. I am trying to avoid this, and hopefully will only have to enter my password once. Maybe I can piggyback on the default Ubunutu home directory decryption and make it all appear seamless?
View 3 Replies
View Related
Mar 4, 2010
I have installed fedora 11 in my system. While installing it asked me encrypted password which i passed. But I forgot that. Now the problem is whenever i boot my system before going to root itself it is asking for volume encrypted password, which as i told you i have forgot. Now i am not able to access my hard disk since it is completely locked. Is there any way to decrypt the password or unlock it. Or if that is not possible can data be recovered,which is my primary requirement..
View 6 Replies
View Related
Mar 4, 2010
I have installed fedora 11 in my system. While installing it asked me encrypted password which i passed. But I forgot that. Now the problem is whenever i boot my system before going to root itself it is asking for volume encrypted password, which as i told you i have forgot. Now i am not able to access my hard disk since it is completely locked. Is there any way to decrypt the password or unlock it. Or if that is not possible can data be recovered,which is my primary requirement..
View 1 Replies
View Related
Mar 17, 2011
I recently got a eSata docking station for hard drives and after deciding to make those volumes encrypted LVM's, I created my first logical volume. After setting it up in yast2 and rebooting I received a prompt for the lvm password, gave it and received:
Mar 17 13:38:21 blkdragon kernel: [ 1105.172687] padlock: VIA PadLock not detected.
Mar 17 13:38:21 blkdragon kernel: [ 1105.313056] alg: No test for stdrng (krng)
Mar 17 13:38:21 blkdragon kernel: [ 1105.323189] alg: No test for stdrng (ansi_cprng)
Mar 17 13:38:22 blkdragon kernel: [ 1105.416892] padlock: VIA PadLock Hash Engine not detected.
Mar 17 13:38:22 blkdragon modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.31.14-0.6-desktop/kernel/drivers/crypto/padlock-sha.ko): No such device
Boot resumed and I looked for the reason for this, the padlock-sha.ko module does exist in the appropiate place and the volume was mounted in spite of the error message. Lvmdump seems to indicate that the volume is, in fact, encrypted. My thoughts at the moment are that the volume was encrypted by aes, so the padlock-sha.ko was not necessary to mount the volume. Backtracking the message log the same error happened during the creation of the volume before rebooting. The kernel version gives it away but it's a 11.2 machine.
View 3 Replies
View Related
Dec 28, 2009
I have a 160GB harddrive with 2 partitions:
1. /dev/sda1 ext2 100MB (this is my /boot partition)
2. /dev/sda2 LVM2 Remaining space (this is my physical volume and is LUKS-encrypted)
There is 1 volume group, slackvg, and 3 logical volumes:
1. swap 2GB
2. root jfs 10GB
3. home jfs 50GB
I would like to shrink /dev/sda2 to make room for another regular partition, is this possible?
View 1 Replies
View Related
Feb 23, 2010
I was running Ubuntu 9.04 Desktop on a headless Pentium 4 machine which is our file, mail, web & fax server. The two x 250GB SATA hard disks were in a RAID 1 array with full disk encryption. Ran the 9.10 upgrade via WEBMIN and it failed. I should have known then to copy over everything to a backup disk, but instead I rebooted.
On restart the machine accepted my encryption passphrase but promptly hung with a mountall symbol lookup error - code 127. So I can't start the machine to get at the disks, and using a Live CD is useless as it has no way to open the RAID array to get at the encrypted partitions. Although we have data backed up (as at last night) I'd hoped not to have to rebuild the entire server from scratch. But its looking bad.I have taken one drive out and plugged it into another machine (Hercules), and the partitions show up as /dev/sdb1 /dev/sdb2 /dev/sdb3.
If it weren't for RAID, I could open /dev/sdb2 the main partition) in Disk Utility and enter my encryption passphrase to get access. But RAID adds a layer of obstruction that I have not yet overcome. I used mdadm to scan the above partitions and created the /etc/mdadm.conf file, which I edited to show the 2nd drive as missing (rather than risk corrupting both drives). I activated the RAID array with mdadm, and cat shows:
Code:
root@HERCULES# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sdb3[0]
1815232 blocks [2/1] [U_]
[Code]...
I've been searching the web for hours but have yet to find someone with a solution to this situation. If anyone has a thought on how to access this disk I'd be pleased to hear from you. In the meantime I will start building a new (9.10) machine from scratch, without RAID, 'cos that's probably going to be necessary.
View 1 Replies
View Related
Oct 4, 2009
I just upgraded my F9 system to F10 using they preupgrade method, and though nothing seems to have failed during the upgrade I can't boot my system any longer.I have a completly encrypted system, and so I need to enter a passphrase at boot. The new F10 system does boot and I do get a Password: prompt but the passphrase is not accepted.My passphrase doesn't contain any odd characters to prevent problems with keyboard mappings. Just plain letters (upper and lower case) and digits
View 9 Replies
View Related
Oct 22, 2009
I have a new Fedora 11 install with all updates working on my: Dell XPS M1330 laptop with nVidia GeForce 8400M GS
I wanted to install compiz fusion on Gnome so I followed these step by step instructions from:
Fedora refused to boot, locking up during the process.
Here is what happens...
After updates I had 3 options at boot up:
A) If I choose the TOP one (newest) it will boot up to a black screen and nothing else, I get a white block which moves with mouse. I cant get a shell and any key I hit just echoes back...ctr-alt-del will result in normal shutdown process displaying.
If I watch the services start (F1) I see all -OK- except: nvidia.ko: Driver already enabled
The boot continues with all OK until it gets to:
STARTING atd:
at which time the screen flashes for about 7 seconds and locks up.
B) If I choose MIDDLE boot option and watch the boot process I see most services start OK except:
-[OK]
Checking for module nvidia.ko [FAILED]
nvidia.ko for kernel 2.6.30.8-64.fc11.i686.PAE was not found [WARNING]
The nvidia driver will not be enabled until found [WARNING]
Driver already disabled
-[OK]
Then the services continue on with [OK] until a few seconds later the screen halts with a mess of colors and symbols on screen and system stops booting. Any key pressed simply echoes back with no other result. Again ctrl-alt-del refreshes screen and shutdown of services proceeds normally.
View 3 Replies
View Related
Oct 16, 2015
My laptop setup is:
sda1: W7
sda2: FAT16
sda3: /boot
sda4: encrypted LVM with debian (everything besides /boot)
now I've re-installed W7 so grub was overwritten. I've tried the procedure which worked for me previously:booting with the netinst usb in rescue mode, choosing a root partition to mount, using grub-install to reinstall the grub:
Code: Select allmount /dev/sda3 /boot
grub-install /dev/sda
Now I'm on Jessie (stable), and this time this fails, and I am able to mount only sda3.grub-install doesn't exit so I'm assuming it has been replaced by `grub-installer'. also '/boot' doesnt exist so I created it manually.
Code: Select allmount /dev/sda3 /boot
grub-installer /dev/sda
The latter fails with
Code: Select all/dev/sda/proc not a directory
View 6 Replies
View Related
May 26, 2011
I have a setup that looks like this
[Code]....
and I'm dumped into recovery mode. However, if I remove these mounts from /etc/fstab via comments, I can wait for the system to boot (which it does very quickly) then mount the mapper devices myself. So what is going on? Has something changed wrt logical volumes, or is this just systemd? I can live with manual mounting, but any advice on resolving the automatic mounting situation would be great.
[Code]....
View 2 Replies
View Related
Aug 6, 2010
Nearly every time that automatic updates finishes installing the software and requires a restart of the OS, the PC locks up at the 'Ubuntu' screen with some dots beneath it.
I have been just been forcing it down by powering off/on the PC - which I figure is probably not a safe thing to do but don't know what else to do or how to troubleshoot this problem.
I've looked at some of the log files but can't make any sense of most of them nor do I know which log file might show the problem.
View 6 Replies
View Related
Aug 18, 2015
i'm trying to Debian 8.1.0 on my notebook Acer Travelmate 2200. Currently i have very outdated version of Linux Mint. It works fine but I prefer keeping system updated. Only way to get updated system now is install new one, and here i have a problem. After CD/ISO booting, installation looking for a mountd devices, etc. then i got statement that CPU stuck for x sec. The same statement appears every 20sec. I was trying it on other linux distr's they give the same error. I didn't overclocked my notebook, his temp is ok. I'm working on it few hours each day, it didn't overheat. Someone told me thats bug of 2.6.x kernel but I'm trying install new system with 3.16.x.
View 4 Replies
View Related
Jun 6, 2010
I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type
fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running:
mdadm --zero-superblock /dev/sda6
mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf
mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module
[root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4
Enter passphrase:
Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume: mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
Now, I unmount the volume
cd ~
Code:
umount /ftdata
cryptsetup remove ftdata
And now, if I try to setup my encrypted volume like this:
Code:
[root@localhost ~]# cryptsetup create ftdata /dev/md4
Enter passphrase:
mount -O noatime /dev/mapper/ftdata /ftdata
I get this error:
mount: you must specify the filesystem type
[Code].....
View 1 Replies
View Related
Jun 6, 2010
I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running: mdadm --zero-superblock /dev/sda6 mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module [root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4 Enter passphrase: Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume:
mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
[Code]....
So why is it that I can't mount my encrypted volume after the first time? I am giving the correct password when it asks to.
View 3 Replies
View Related
Jun 13, 2009
[code]...
when trying to choose the Linux partition, I found that it would just hang at a blank screen. Looking further into the problem, I had booted with the Linux Rescue and checked the /boot/grub/grub.conf file. It appeared to be that the menu was set to hidden. I got rid of that line, and checked the boot arguments. It still had acpi=off set with the kernel and everything else seems to be in order. Root is set to root (hd0,2) which should be correct.
View 6 Replies
View Related
Feb 3, 2010
whenever I try and boot the computer begins to load correctly, but after the scrolling ubuntu splash, I just get a black screen.
64bit Ubuntu 9.10
View 6 Replies
View Related
Aug 23, 2010
Some days ago I had Windows XP and Ubuntu 10.04, obtained by upgrading from 9.10, installed on dual boot (same HD).
However, I had some issues with Ubuntu's boot: after its selection in GRUB, the login panel would not display and the screen would remain black.
I was told that upgrading might lead to problems, so I uninstalled Ubuntu 10.04 and installed it by CD.
Now I have Windows Vista and Ubuntu 10.04 (this time the CD-installed version) on dual boot, but Ubuntu after 4-5 uses doesn't boot anymore!I've also tried to boot in recovery mode, but that was no use(the recovery panel does not show up).
View 5 Replies
View Related
Jan 15, 2010
I have installed ubuntu 9.10 with karmic kernel and GNOME, on toshiba 512 MB RAm laptop. it worked fine but some times after complete shut down or sleep, it wont boot again. Laptop is completely dead and silent. I had to power it off, battery taken out and inserted again to get it started again. Then it worked all normal and fine. Why it happens and what i shud do next?
View 7 Replies
View Related
