Ubuntu :: Simulate Analogue And Digital(DVB) Cards During Development With MythTV?

Feb 13, 2011

Is there any way to simulate analogue and digital(DVB) cards during development with MythTV so I am able to do some basic testing on a separate computer without disturbing my real MythTV server ?

View 3 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Convert A Digital Sound Stream To Analogue Before It Is Sent To The Hdmi Out?

Jan 13, 2011

how to have alsa convert a digital sound stream to analogue before it is sent to the hdmi out? I would like to modify asound.conf. I do not have gnome as a desktop so I need to manually input the changes to asound.conf. The reason I ask is. I have sound going out of my acer revo to both spdif and hdmi. The spdif goes to my receiver and I want digital passthrough for that. The hdmi goes to my tv and I need it to be analouge before it gets to the tv. Right now, I get passthrough to both the spdif and hdmi. (the tv is all static) I want to have alsa convert the signal for the hdmi output only.

View 9 Replies View Related

Ubuntu Multimedia :: Set Up Usb, Digital TV Tuner, An AVerTV Hybrid Volar HD (H830) , To Work With MythTV?

Aug 14, 2011

to set up my usb, digital TV Tuner, an AVerTV Hybrid Volar HD (H830) , to work with MythTV? I note that the 'MythTV backend set-up', only refers TV Tuner cards, not usb sticks. Nevertheless, the link above provides a 'Linux x86' driver for my computer � a .tar.gz file. The link also provides an accompanying text file that asserts 'This package is tested with MythTV against Ubuntu 10.04'. I've recently installed Ubuntu 11.04.The accompanying text gives its pre-requisites as a. support linux kernel 2.6.29 or later. b. make sure /lib/modules/`uname -r`/build exists c. make sure "dvb_frontend.h" exist in your Ubuntu. d. kernel modules dependency: videodev, video buf-core, v4l2-common.

For (b), my computer shows the following path /lib/modules/2.6.38-10-generic/build$ I'm note sure what (c) means with 'in your Ubuntu' Needless to say, its later instruction doesn't work Install driver to system sudo ./xxx_LinuxDrv_x86_vxxx-beta_Install.sh I'm told that this 'command not found'

View 1 Replies View Related

Ubuntu Multimedia :: Scanning For Analogue Cable Channels?

Feb 10, 2010

I'm trying to scan for analogue cable channels. How do I go about this?

I'm using the Hauppage HVR-1950 in Karmic.

After initial setup I'd like to use a program other than MythTV.

View 3 Replies View Related

Ubuntu Servers :: Dns Server Started With 2 NIC Cards - Bios Sees Both Cards But - Both Dont Show In Ifconfig

Dec 1, 2010

I have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?

View 1 Replies View Related

Ubuntu Installation :: 10.04 Graphics - (login?) Screen Just Shows Rolling Display Like An Out-of-tune Analogue TV

Jul 2, 2010

I tried installing 10.04 via Wubi on a friend's notebook and have hit problems with the display. The installation seemed to proceed OK (took ages to download / install - left it running overnight) until it came to boot to Ubuntu. The GRUB menu appears OK, but choosing Ubuntu leads to a blank screen with some icons at the bottom, which is displayed for a few seconds, then the (login?) screen just shows rolling display, like an out-of-tune analogue TV. I suspect that I need a graphics driver or something? The notebook is a logiQ notebook, with 128MB SiS Mirage-3 graphics.

View 2 Replies View Related

Ubuntu Multimedia :: Analogue Capture Program To Capture Austar?

Aug 13, 2010

What is the best analogue capture program please to capture Austar.

View 1 Replies View Related

Ubuntu :: Simulate Bad Block Or Sector On Drive?

Feb 15, 2010

I want to simulate a bad block or sector on a drive or even a virtual drive image to test my data recovery distro. I wish I would have bookmarked when I read about it before. It was some type of low level command, I remember something about scsi subsystem or kernel thingabob.

View 3 Replies View Related

Ubuntu :: Simulate Keypress Via Keyboard Shortcut?

Feb 21, 2011

I have a G15v1. After going through hoops and loops to get it working only to discover that you only needed to install g15daemon through the Ubuntu Software Center, I found myself with one big problem. I migrated from windows just now, and there, I had my macro keys(the extra ones) bound to CTRL+W, CTRL+T and to a simulated mouse-wheel scroll so I could navigate the web more easily. How would I go about doing that? I figured, if I used the System->Preferences->Keyboard Shortcuts thingy and bound my key, in my case XF86Launch5, to a command similar to "simulate keypress CTRL+W"(I know it's totally wrong, just to give you an idea), I might be able to get it working again. Only problem is, I can't find anything like that. Any of you has any clue about it? I googled but I only find C++/Java/coding related results, which are not exactly what I need to do.

View 4 Replies View Related

Fedora :: How To Simulate A Webcam

Mar 27, 2010

I do not have a webcam yet, but would like to set certain video files I have to be played as my 'streaming video content' from a 'virtual' webcam.

View 6 Replies View Related

Fedora :: New Update - Could Not Do Simulate

Jun 26, 2010

Could not do simulate: nautilus-sendto-2.28.4-1.fc13.i686 requires libedataserver-1.2.so.11
gnome-panel-2.30.0-1.fc13.i686 requires libedataserver-1.2.so.11
empathy-2.30.1.1-1.fc13.i686 requires libedataserver-1.2.so.11 : Success - empty transaction

View 14 Replies View Related

Fedora :: Add / Remove Software - Could Not Do Simulate

Sep 2, 2010

How to get rid of the following error I've been receiving from Yum. I'm fairly new to Fedora. The following message appears when Add/Remove Software is launched. It also pops up periodically in the notification window.

could not do simulate: Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 3270, in __init__
self.repos.confirm_func = self._repo_gpg_confirm
File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 823, in <lambda>
repos = property(fget=lambda self: self._getRepos(),
File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 551, in _getRepos
prerepoconf = self.prerepoconf
AttributeError: 'PackageKitYumBase' object has no attribute 'prerepoconf'

View 1 Replies View Related

Networking :: Simulate Mobile Agents With NS2?

Jan 7, 2011

how to simulate mobile agents with NS2 (docs , code ......)

View 2 Replies View Related

Software :: Simulate Serial Device With Pty's ?

Sep 21, 2009

I wrote software which access and reads a serial device. I would like to test this software on my computer without loop-wiring or without a second computer.

How could I use pty's to simulate a serial device?

Actually I would like to temporary replace the /dev/ttyS1 file by one end of the pty. How could I do this? Is there a command to create a pty pair?

View 4 Replies View Related

Programming :: Simulate Unix Kernel In C++ ?

Jun 2, 2010

How simulate unix kernel in c++..or give me a link....

View 2 Replies View Related

Ubuntu :: Simulate A Floppy Drive With User Read Write

Sep 17, 2010

I have a computer with no floppy drive (x64 ubuntu lucid installed) I have a program (wine windows xp) that will only save data and export data from/to a floppy drive. I found information on setting up an emulated floppy drive. i.e.

sudo dd bs=512 count=2880 if=/dev/zero of=imagefile.img
sudo mkfs.msdos imagefile.img
sudo mount imagefile.img /media/floppy -o loop

I modified the winecfg to include under the drive section A: /media/floppy. Problem is I cannot write to the drive as a normal user. I have tried everything I know but only root can read write to the drive. Is there someway to set up this emulated floppy to allow me as a user to write and read contents.

View 1 Replies View Related

Debian Multimedia :: How To Simulate The Enter Key In X Windows

Dec 16, 2014

When I drink tea, the water splashed on my keyboard. It didn't cause any problems until a few mins ago. Now my Enter and right hand side shift key don't function any more (The new line in this text is copied from other thread).

So I would like to know how can I simulate an enter key press so that e.g. a command can be executed in terminal. Because I have some source code uncommitted, I want them at least get committed first.

View 2 Replies View Related

Debian Programming :: How To Simulate Script Execution

Aug 7, 2015

I'm trying to save the output of the script I wanna run but for some reason I cant manage to do it with "script.sh > Output_4.txt"

The thing is that the script was already run and it extracted some directories so when I try to run it again (to save the log to a Output_4.txt) bash says (see screen-capture) and of course the log's empty!!!!

View 2 Replies View Related

Fedora Servers :: Simulate A VH Through A Localhost With A Dynamic IP?

Nov 16, 2010

For backup and pre-functionality purposes, I need to simulate a VirtualHost in my Fedora (14) machine. I found some interesting links to carry out that process but with an IP fix.So, how can I simulate a VH through a localhost with a dynamic IP?

View 2 Replies View Related

General :: Simulate Ack By Using Grep With The Right Combination Of Options?

Aug 25, 2011

I have ack-grep installed on my local machine, and find it indispensable for quickly 'acking' through a codebase when debugging. However, on my cheap shared hosting, there is no ack-grep. One of the testimonials on betterthangrep.com mentions a

Rube Goldberg mess of find/grep/xargs which sounds like what I need, but coming from the opposite direction.

View 2 Replies View Related

Hardware :: Simulate Unplug And Replug Of USB Devices?

Jul 1, 2010

After some tests I found that some USB Bluetooth Dongles errors, only are recoverable if the USB is unplugged an then plugged again. Is there some way to simulate that a USB device is unplugged and re-plugged?

View 5 Replies View Related

Networking :: Simulate A 500Mbps Link On A 1000Mbps?

Mar 31, 2010

I need to simulate a 500Mbps link with a 100ms delay and a loss probability of 0.0001% on an ethernet link between two gigabit ethernet cards...I tryed to use these commands:

# tc qdisc add dev lo root handle 1:0 netem delay 100ms loss 0.0001
# tc qdisc add dev lo parent 1:1 handle 10: tbf rate 500Mbit buffer XXXX limit YYYYY

But during some simulation throughputs are very low ( 190Kbps....210Kbps....) for different values of XXXX and YYYY.... (I don't want that the loss probability is caused by the buffer and the limit value but only by the loss probability setted on netem...)

View 2 Replies View Related

Software :: Simulate Cron With Screen Manager?

Nov 10, 2010

I can't use cron on server. But on the same server i can use screen. Is there any way (any program) to run something like cron in the screen session? Or any solution for that problem.

View 3 Replies View Related

Ubuntu Servers :: Simulate A Failed Raid Array On A Pair Of 2tb Disks?

Feb 26, 2011

Using a fresh copy of server 10.04 im trying to simulate a failed raid array on a pair of 2tb disks. Here is the procedure i have been following so far:

- Remove the dead disk partitions from each of the raid 1 arrays (substitute the correct md devices and partitions)
- mdadm /dev/md0 -r /dev/sdb2
- mdadm /dev/md1 -r /dev/sdb3

[code]....

I get an error here that sfdisk does not support gpt (guid partition table). I thought sfdisk did support gpt? It says to use parted, but i cant find a command that copies a partition table over from another disk in parted documentation. Any suggestions? I suppose i could make the partitions manually, but im writing a procedure for people who arent that technical and i need it to be simple enough to be run in my absence. manually building the partitions would be too hard for them.

View 2 Replies View Related

Programming :: Simulate Key Strokes Events In Other Processes In System?

Feb 3, 2011

I have a program that receive user input.
I want to run this program automatically without user interaction, and in order to do that I need to simulate key events.
How can I do such a thing?

The program I am running is partly java and partly shell.

The shell part is easily done by using:
./prog.sh <parameters (Parameters being a file containing parameters)
But the java doesn't work similarly.

View 7 Replies View Related

Programming :: Simulate Dijsktra's Algorithm Using Network Animator Of Ns2?

May 3, 2011

I need to simulate dijsktra's algorithm using network animator of ns2. how to write a tcl script for my code. This tcl script runs the dijsktra code and simulates its running on network animator.

View 1 Replies View Related

Ubuntu Security :: Pen Test IIS - Methods To Simulate Attacks To Check HIPS Detects?

Jan 27, 2011

I need to do a pentest on a Microsoft IIS webserver to test the efficiency of the HIPS i have installed on. methods to simulate attacks so that i can check if the HIPS will detect them?

View 4 Replies View Related

General :: Write A Shell Script To Simulate The Built-in Commands?

Nov 7, 2010

i was trying to figure out a way to write my own linux commands.. in fact i wanted to write a shell script to simulate an already existed linux commands like 'cd','ls' and'adduser'i just dont know the language of scriptting and even doesnt know the steps to make a script

View 3 Replies View Related

Server :: Generate Very Large Files And Simulate A Consistent Throughput To The LUN

Jul 6, 2010

I have a test RHEL5 box, sitting in a brand new Dell blade rack on a PowerEdge M610, with a lovely Emulex OCm10102-F-M FCoE card connected to a Cisco Nexus 5000 switch. The whole setup is extremely new (the cards only recently became available for purchase.) We've finally worked with Emulex to get the cards functional, and we are ready to some stress testing to the SAN. My question now is, is there a good tool I can use to generate a large amount of traffic to a LUN? The Wintel team used a windows-only tool that showed an average of 6gigs/second throughput, so I need something that can generate very large files and simulate a consistent throughput to the LUN. I found iozone, but I'm having a devil of a time with it.

View 2 Replies View Related

Software :: Simulate A Wireless Network Where All Nodes Broadcast Packets?

Apr 7, 2011

I want to simulate a wireless network where all nodes broadcast packets

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved