Software :: Simulate A Wireless Network Where All Nodes Broadcast Packets?
Apr 7, 2011I want to simulate a wireless network where all nodes broadcast packets
View 3 Replies
ADVERTISEMENT
OpenSUSE Wireless :: LiveUSB Cannot Connect To Non-broadcast SSID Wireless Network
Sep 30, 2010I've got openSUSE 11.3 running via liveUSB on a netbook and no matter how many times I try, I cannot get wireless to connect to my network.
My network is:
- non-broadcast
- WPA2 Personal
- G
The netbook is fairly recent from Asus and wireless works perfectly with Fedora 11 and Windows XP.
Networking :: Broadcast Packets Failed To Receive - Socket Beginner
Feb 24, 2011I am working on uClinux/almost same as Linux. I am new to socket programming. I have two micro controllers running on same code. Simple run with arguments mean send merged string.
run 1st micro controller (Send): ./Name "anystring"
run 2st micro controller (Recive):/Name
My code is:
int receive() {
// Create socket
int sock_fd;
struct sockaddr_in addr;
char buffer[kBufferSize];
int bytes_received=0;
int addr_len = sizeof(addr);
printf("receive start ");
sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
if ( sock_fd == -1 ) {
printf("receive Create ");
// Error occurred return 0; }
printf("Res Create sucee ");
// Create address from which we want to receive, and bind it
memset(&addr, 0, sizeof(addr));
addr.sin_family = AF_INET;
addr.sin_addr.s_addr = INADDR_ANY;
addr.sin_port = htons(kPortNumber);
if ( bind(sock_fd, (struct sockaddr*)&addr, sizeof(addr)) < 0 ) {
printf("receive bind "); // Error occurred return 0; }
printf("Bind Succeful sucee ");
while ( 1 ) {
// Receive a message, waiting if there's nothing there yet
bytes_received = recvfrom(sock_fd, buffer, kBufferSize-0, 0,
(struct sockaddr*)&addr, &addr_len);
if ( bytes_received < 0 ) { // Error occurred
printf("receive bytes "); return 0; }
printf(" bytes_received succeful ");
printf("Ressocketstring : %s ",buffer);
memset(Ressocketstring,0x00 , sizeof(Ressocketstring));
strcpy(buffer,Ressocketstring); printf("Ressocketstring : %s
",Ressocketstring); printf(" ");
printf("Hello Receive finished");
// Now we have bytes_received bytes of data in buffer. Print it!
fwrite(buffer, sizeof(char), bytes_received, stdout); } }
int transmit(char * data, int length) {
int sock_fds[kMaxSockets];
// Obtain list of all network interfaces
/* struct ifaddrs *addrs;
if ( getifaddrs(&addrs) < 0 ) {
// Error occurred return 0; } */
// Loop through interfaces, selecting those AF_INET devices that support broadcast, but aren't loopback or point-to-point
struct sockaddr_in addr; int number_sockets = 0; struct hostent *he;
/* const struct ifaddrs *cursor = addrs;
while ( cursor != NULL && number_sockets < kMaxSockets ) {
if ( cursor->ifa_addr->sa_family == AF_INET
&& !(cursor->ifa_flags & IFF_LOOPBACK)
&& !(cursor->ifa_flags & IFF_POINTOPOINT)
&& (cursor->ifa_flags & IFF_BROADCAST) ) {
// Create socket*/
sock_fds[number_sockets] = socket(AF_INET, SOCK_DGRAM, 0);
if ( sock_fds[number_sockets] == -1 ) // Error occurred {
printf("Error Create "); return 0; }
he = gethostbyname((char *)BCASTADDRESS) ;
if (he==NULL ) {printf("Error gethostbyname ");
herror("gethostbyname"); printf("Error host "); exit(1);
} printf("Res He ");
// Create address from which we want to send, and bind it
memset(&addr, 0, sizeof(addr)); addr.sin_family = AF_INET;
addr.sin_addr = *((struct in_addr *)he->h_addr);//((struct sockaddr_in *)cursor->ifa_addr)->sin_addr; addr.sin_port = htons(kPortNumber);
if ( bind(sock_fds[number_sockets], (struct sockaddr*)&addr, sizeof(addr)) < 0 )
{ // Error occurred printf("Error bind "); return 0; }
// Enable broadcast int flag = 1;
if ( setsockopt(sock_fds[number_sockets], SOL_SOCKET, SO_BROADCAST, &flag, sizeof(flag)) != 0 ) // Err occur { printf("Error Enable "); return 0; }
number_sockets =1; printf("Succes 1 "); printf("transmit Create ");
// Initialise broadcast address memset(&addr, 0, sizeof(addr));
addr.sin_family = AF_INET; addr.sin_addr.s_addr = INADDR_BROADCAST;
addr.sin_port = htons(kPortNumber);
// Send through each interface int i;
for ( i=0; i<number_sockets; i++ ) {
if ( sendto(sock_fds[i], data, length, 0, (struct sockaddr*)&addr, sizeof(addr)) < 0 )
{ printf("Error Send "); // Error occurred return 0;
} printf("Succes 2 "); } return 1; } void MergeMessage( ) {
memset(socketstring,0x00,sizeof(socketstring));
sprintf(socketstring,"%s@%s@%s@%s@%s@%s@%s@%s@%s@%s@%s
",Tmeg.s1,Tmeg.s2,Tmeg.s3,Tmeg.s4,Tmeg.s5,Tm eg.s6,Tmeg.s7,Tmeg.s8,Tmeg.s9,Tmeg.s10,Tmeg.s11);
printf(" MergeSocketMessage : %s ",socketstring); }
int main (int argc, char** argv) {
int fd=0,bdc=0; struct ifreq ifr; printf("Tsarting man ");
fd = socket(AF_INET, SOCK_DGRAM, 0);
strncpy(ifr.ifr_name, "eth0", IFNAMSIZ-1);
ioctl(fd, SIOCGIFADDR, &ifr); close(fd);
memset(MYIP,'-',sizeof(MYIP));
memset(BCASTADDRESS,'-',sizeof(BCASTADDRESS));
strcpy(MYIP, inet_ntoa(((struct sockaddr_in *)&ifr.ifr_addr)->sin_addr));
printf("Etho: %s ,len:%d ", MYIP,strlen(MYIP));
for(bdc=strlen(MYIP);MYIP[bdc-1]!='.';bdc--) {}
strncpy(BCASTADDRESS,MYIP,bdc-1); strcat(BCASTADDRESS,".255");
printf("BCASTADDRESS: %s ,len:%d
", BCASTADDRESS,strlen(BCASTADDRESS));
printf("Initial Broad Cast message "); {
/*s0"0" (id=76)
s1"500" (id=77)s2"100" (id=78)s3"100" (id=78)s4"startVD" (id=79)
s5"lighting" (id=80)s6"reading" (id=81)s7"Anna" (id=82)s8"0" (id=76)
s9"";s10"" (id=64)s11"" (id=64)*/
strcpy(Tmeg.s0,"0"); strcpy(Tmeg.s1,"500");strcpy(Tmeg.s2,"100");strcpy(Tmeg.s3,"100");
strcpy(Tmeg.s4,"startvd");strcpy(Tmeg.s5,"lighting");strcpy(Tmeg.s6,"reading");
strcpy(Tmeg.s7,"anna");strcpy(Tmeg.s8,"0"); }
MergeMessage (Tmeg); if( strlen(argv[1]) ) {
//strcpy(socketstring,Tmeg,sizeof(Tmeg));
if(transmit(socketstring, strlen(socketstring) ) ) {
printf(""%s" transmitted. ", socketstring); } else {
printf("Error occurred: %s ", strerror(errno)); return 1; } }
else { for( ; ; ) {
if ( argc < 2 ) // No argument: Just listen {
printf("Listening... "); if ( !receive() ) {
printf("Error occurred: %s ", strerror(errno)); return 1;
} return 0; } } } printf("Finished "); return 0;
} //////////////// .h file is /////////////
//#define WIN32_LEAN_AND_MEAN// Exclude rarely-used stuff from Windows headers
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <net/if.h>
#include <fcntl.h>
#include <netdb.h>
#include <signal.h>
#include <sys/wait.h>
#include <sys/ioctl.h>
#define SubLen50
//#include <ifaddrs.h>
#include <errno.h>
char MYIP[20];
char BCASTADDRESS[20];
typedef struct {
char s0[SubLen];
char s1[SubLen];
char s2[SubLen];
char s3[SubLen];
char s4[SubLen];
char s5[SubLen];
char s6[SubLen];
char s7[SubLen];
char s8[SubLen];
char s9[SubLen];
char s10[SubLen];
char s11[SubLen];
}msg_struct;
msg_struct Sendmsg;
msg_struct Tmeg; //Recivemsg;
Boolean pri[6];
char socketstring[SubLen*12];
char Ressocketstring[SubLen*12];
int kBufferSize = (SubLen*12);
Fedora Networking :: SSID Broadcast Disabled - Cannot Connect To Wireless Network
May 6, 2010I have just installed FC12 on my machine - and gone Windows free for the first time ever. Now I do use various flavours of Linux on a daily basis but not from an installation/sys admin point of view so my questions here may seem a little basic but pleas eindulge me if you will!
Now, my network connection works perfectly well under the following scenarios.
1) FC12, wired to router
2) FC12, wireless, SSID broadcast enabled
3) Ubuntu (laptop), wireless, SSID broadcast DISABLED
The only scenario that does not work is FC12, wireless with SSID broadcast disabled.
I can only assume that it is an issue with my USB modem (a linksys WUSB54GS) since the same set-up works fine from my laptop running Ubuntu with an internal wireless card.
Now, I know from reading the forums that it's pretty easy to get around a disabled SSID broadcast but this is an itch I just have to scratch....what the hell is causing this problem?
nm-tool ouput is as follows:
I have tried using wpa_supplicant but I am not sure which driver I am using here - is it ndiswrapper per chance?
(Driver: rndis_wlan)
How I can connect once again to my wireless router with SSID broadcast turned off.
OpenSUSE Network :: Setup Xen Virtual Nodes We Encountered One With The Network?
Jan 26, 2010while trying to set up Xen Virtual Nodes we encountered one issue with the network (which is why it is posted here On the DomU the interface is provided by a bonding -bond0- of three NICS. Now the Xen network script a) does not take this bonding b) destroyes even this bonding From a number of posts I assume I have to configure this by hand, correct? Is there an instruction how to do this? Simply create a bridge on top of bond0??
View 1 Replies View RelatedProgramming :: Write A Program In C That Can Sniff Packets From Ethernet And Distinguish RTP Packets From Non-RTP Packets?
Aug 30, 2010i need to write a program in c that can sniff packets from Ethernet and distinguish RTP packets from Non-RTP packets, i have no idea what should i do
View 9 Replies View RelatedOpenSUSE Network :: Hostname Not Saved In Router Table / Broadcast It To Entire Network?
Jun 13, 2010I setup the hostname for my linux machine to Linux. If I try ping Linux from the same computer it works. If I try from another computer inside my network the host can not be resolved. If I ping the IP from another computer it works.
I take a look in my router at DHCP client list and my linux machine doesn't have the Hostname set up.
How to broadcast the hostname to the entire network?
Networking :: Discover All Network Nodes And Their Ips?
Feb 7, 2011i need to discover all network nodes and their ips is their a way to do it, then if i need to discover certain nodes which runs certain program. I'm using Fedora14 and FreeBSD
View 2 Replies View RelatedServer :: Begin Online TV Broadcast - Can't Directly Broadcast From Country
Apr 1, 2010Friends i have an idea to broadcast few local TV channels to the world via internet.But friends i can't directly broadcast from my country because of bandwidth.friends is there a way to do this through a remote server server? i just need to input my stream to a remote server and then broadcast it from the server.I can stream channels to the server from my country through a 10mbbs connection.
View 2 Replies View RelatedProgramming :: Simulate Dijsktra's Algorithm Using Network Animator Of Ns2?
May 3, 2011I need to simulate dijsktra's algorithm using network animator of ns2. how to write a tcl script for my code. This tcl script runs the dijsktra code and simulates its running on network animator.
View 1 Replies View RelatedUbuntu Networking :: Broadcom Wireless Don't Broadcast In 11.04?
May 2, 2011I have a Dell Vostro 1400 with a BCM4311 Broadcom wireless card that I just reinstalled with 11.04 from 10.04. I have the drives installed and it seams to be working when i run the 'Additional Drives', but I can't get the wireless adapter broadcasting. I followed the instructions given in the knowledge base on installing Broadcom Wireless, to see if I could get it running and that is where I saw the difference between the example and my computer when writing the 'sudo lshw -C network' command. In the example it said it was broadcasting under configuration (just like my wired networks below) and in mine it does not (see below for copy past).
I can't find a tickbox in the systemtray to enable the wirless networking that I had before the update to 11.04 (the 'Enable Networking' tickbox is still there and the wired network works fine - that is how I got online to do this post). I have the hardware switch turned on and I have been in the BIOS and made sure that the Wireless is enabled.Anyone who knows what could be wrong? Where could I go from here?Quote:
morgan@morgan-Vostro-1400:~$ sudo lshw -C network
[sudo] password for morgan:
*-network UNCLAIMED
[code]....
Ubuntu Networking :: Calculate Broadcast & Network?
Jul 13, 2010i m setting up a linux server and i have to setup ip , in static mode. so i know everything except those two things. how do i calculate them?
example ip:200.49.142.91
submask 255.255.255.248
gateway 200.49.142.89
Networking :: Subnet - Network IP - Broadcast IP Calculation
Feb 14, 2010I am basically from system side and often confused about the calculation of the IP addresses.Just i want to know that what how can i calculate the following of a IP Address:
(1) Available IP in a Network
(2) Broadcast IP
(3) Network Prefix or Net Mask
General :: Find Network / Broadcast Pairs?
Dec 5, 2009Given a subnet mask of 255.255.255.192 and the first network address of 64.5.96.0, what are all of the network/broadcast pairs?
View 1 Replies View RelatedNetworking :: Subnetwork , Network And Broadcast Address / Difference Between Them?
Mar 31, 2009I dont know the difference between these topics.
View 1 Replies View RelatedNetworking :: Firewall - Allow Packets Coming From Internet After Authenticating And To By Pass Packets Generated From Internal LAN?
Feb 8, 2010i have a linux server runnig oracle applications. i need to access this server from putty using ssh through internet. i did by registering my static ip with the dnydns.org and i am able to connect to the server. but now there is no security to authenticate any user as any one knowing the password can login to it.
i thought of configuring the firewall of linux server but the client ip`s are not static and they change continiously. so thought of keeping one more pc between the server and the router which will do the work of authenticating. but i am confuse as how to configure it to allow the packets coming from the internet after authenticating and to by pass the packets generated from internal LAN?
Slackware :: Network. No Rc.netdevice. No RX Or TX Packets?
Aug 8, 2010I created a similar thread last week in the networking section but only got one response. I was hoping to get a little more help here as this forum helped me tremendously to partition my hard drive safely. That was over a week ago, and ever since then I have been struggling with setting up my network. Here is what I have done.Basic set up with netconfig. I selected DHCP and followed the directions on the screen.ifconfig -a shows eth0 with no RX or TX packets at all, but at least it showed me information. If it was not detecting my card (which is compatible with linux), it would have said no device found. correct?
dhclient eth0 just hangs there for half a minute until I can add a command again.dhcpcd eth0 times out.I read (in slackbook chaper 5.2.1) that the correct kernel module may not be loaded. So I opened rc.modules with pico and went to the netdevice section. In slackbook it said to find my device and uncomment it.... but I cant find it! (I have an atheros ar9285 in my stock compaq CQ61 laptop) I also opened rc.netdevice and it was empty..It seems like the more I learn about the network, the more lost I get. I keep hearing that configuring a network on slackware is easy, am I just missing some simple step?Also, whenever I startx, akonadi gives me an error. I also get another error saying that it could not parse XMS file. Is that just due to my lack of an internet connection at the moment?
Ubuntu Servers :: Network Between Cloud Controller And Nodes Is Required For A Proper Cloud Installation?
Jan 12, 2010what kind of network between cloud controller and nodes, is required for a proper cloud installation? I mean, Does all machines needs to be in same network, in same lan, or may be in MAN or WAN ? how much should be network throughput? 1Mbit/sec , 10Mbit per sec, or 1Gbit/sec? I ask because I need to know the possibility of running nodes on different locations.
View 1 Replies View RelatedNetworking :: Sending/replaying Network Packets?
Dec 10, 2008I am not a networking expert by any means (in fact I have never taken a networking course), but I have taken several security courses, and generally we wind up discussing replay attacks. For example, the Needham-Schroeder protocol (using symmetric-key cryptography anyway) is flawed because it allows for replay attacks, and I understand why.
I guess my question is actually how someone would perform a replay attack. I know I can sniff network traffic by downloading wireshark. I also have downloaded winpcap and npg on my WinXP virtual machine. I'm trying to use this guide to help me, but I'm quite lost:[URL]What I did was to post a "link" to my facebook profile and I sniffed the traffic using wireshark. What I would ultimately like to accomplish is to copy that packet out of the wireshark output, and then use a tool like npg to transfer the raw packet back to facebook, which should result in a second, redundant post. I just can't figure out how to do that.
I'm pretty sure this should be possible. Facebook only uses an SSL session for authentication during login. After that, the information is just sent in the clear, so I'm pretty sure this should be possible.Can anyone explain how to do such a thing? It would really help my research paper that I'm working on this semester if you can. As of right now the attack we are trying to demonstrate/defend against is using a Windows VM, which is why I'm using winpcap/npg. The attack is actually possible using just about any OS (depending on the exploit used), but our POC is Windows only at the moment
Networking :: Can Sniffed Packets Be Forwarded To A Different Network
Feb 15, 2011I'm using madwifi linux driver (ath1) in monitor mode to capture some wireless traffic. I can see that all wireless traffic is coming well through the wireless interface (checked using TCPDUMP). What I want to know is how I can forward the captured wireless packets to a different Ethernet interface (e.g. eth2) in the same machine to send those captured packet out to a different computer.
I set 1 for /proc/sys/net/ipv4/ip_forward
for iptables, I tried this rule: iptables -A FORWARD -i ath1 -o eth2 -j ACCEPT
However, I coudn't read any packet from eth2 via TCPDUMP.
Networking :: Iptables Routing Packets On Same Sub-network
Feb 17, 2010I am running into trouble while trying to set-up a iptables routing policy. I have two machines on the same sub-network (xxx.xxx.153.0). One of the machines is used as a default gw for the other (xxx.xxx.153.250 is a gateway for xxx.xxx.153.142 and xxx.xxx.153.254 is a gw for xxx.xxx.153.250). There is no explanation for why the xxx.xxx.153.250 is in the middle -- xxx.xxx.153.142 can go straight to xxx.xxx.153.254, but is is like that for now.I am trying to find an iptable rule to be executed on the xxx.xxx.153.250 machine to route the packets.
View 3 Replies View RelatedUbuntu Networking :: Internet Dataflow Over Wireless - Get 1 Or 2 Ping Packets
Jun 4, 2011I'm running Lucid (10.04), dualboot vista, but I'm having some issues with my wireless USB dongle. Previously (in a different) location, the network wasn't showing in my wireless network tab, and that was never resolved. But now I'm in a new place, and what I'm finding is that my network is showing up in the networks tab, and I can select it, enter the PSK, and it starts to interrogate, but never seems to manage all the way through to getting internet.
Im not sure whether the machine is able to connect to the network, but not the wider internet, or what. The only indication I'm getting is that its connecting for a length of time, then gives up. I have managed to get the update tool pop up - so I'm not sure if thats an indicator of some internet connection or not (presumably it only generates the list of packages to update when it can connect to the net and see what updates are required...) I believe its also managed to get 1 or 2 ping packets through to the internet. I'm driving a belkin N-wireless USB adapter, N10117.
General :: Wireless Card Stopped Receiving Packets - Slackware?
Mar 6, 2010I just installed Slackware 13 with xfce and everything went well (eventually). At first, my wireless didn't work, but then I found /etc/rc.d/rc.wireless.conf. Everything was working, and I was happily surfing and downloading packages.But then one day... It just stopped! I tried to ping google, and it could send packets but not receive them.I'm connecting through an unlocked network in my building, so I guess it's DHCP (thats what i set it up with the first time 'round
View 1 Replies View RelatedUbuntu :: Network Bridge - Moving Packets Between Interfaces
Mar 27, 2010I am using vnuml to test a network project. I have one Ethernet card on my ubuntu 9.10( eth0) with network 10.1.0.0/16, and creating a tap0 with subnet 10.4.0.0/16. Now the problem is how to work them together, such that packets from one interface goes to other one?
View 2 Replies View RelatedGeneral :: Compile A C Program Which Niffs The Network For Arp Packets?
Feb 8, 2011how to fix this error: I wanna compile a C program which niffs the network for arp packets and prints them out ,I keep getting this error:
undefined reference to `pcap_parse' I have installed every thing new version of pcap ,..
General :: Redirection Of Private Network Packets In The Gateway
Jul 25, 2011I have users using Windows XP, Windows 7, Linux (Fedora) and Mac. They all are in a single private network and all access internet through a Linux (RHEL5) system in which Squid acts as gateway. The same is true with my branch offices too except that private network is different and gateway system uses Fedora 9 instead of RHEL5. All the branch offices are connected through point to point leased lines with the head office for file transfer.
My requirement is this: I have a web server located at head office. Presently I am able to access this server from my branch offices through internet. I would like to access this server from branch offices through leased lines. This too I am able to access if I do routing in users system. The file transfer is taking place through one to one system at two ends by creating static routing in those systems.
Networking :: Can Forward Packets Sniffed By Monitor Mode Wireless Interface?
Feb 9, 2011I'm a student who is working on a wireless research project. I have a madwifi driver for Atheros chipset on Debian Linux. With having the wireless interface get into monitor mode, I want to forward the captured packets from the wireless interface to the other Ethernet interface so that a different computer which is connected to this machine via Ethernet receives those packets. I checked that alll packets are received in the wireless interface using TCPDUMP. I tried to forward those packets with IPTABLES like 'iptables -p FORWARD -i ath0 -o eth2 -j ACCEPT' However, I couldn't see any packets forwarded to eth2 using TCPDUMP.
View 5 Replies View RelatedGeneral :: Netem For Mac OS X To Emulate Network Latency And Dropped Packets?
Aug 9, 2010I'm looking for an open source/free network emulator tool that I could use on Mac OS X, to simulate a slow network connection, limited bandwidth and other network characteristics such as dropped packets etc for both UDP/TCP connections (or even on the physical layer).
I'm looking for the simplest solution that would allow me to run TCP/UDP servers and have a few clients connect to them on localhost emulating various network connections. I'm mainly wondering if I can use something like Linux's netem on Mac OS X (or even better cross-platform Windows/Linux/Mac). Perhaps I can run VirtualBox and a Linux kernel running netem, has anyone had luck with that?[URL]...
Ubuntu Security :: Something Is Trnsmitting Packets And Grinding Network To A Halt?
Feb 10, 2010I have a small network with 4 users, a Win2003 server for LAN/security functions, and a Dell Blade server running Ubuntu 8.04.1 which runs as our web server on port 80. I manage the Ubuntu server with Webmin v1.42Yesterday, my users weren't able to access the internet nor were they able to receive mail, etc. and no one could access any of the website hosted on the webserver. However, the internal users could access each other's PCs and internal printers and devices - just nothing outside.
I began to troubleshoot: I could see a lot of activity on the Router/Firewall on the port connected to the Ubuntu server. When I unplugged the server, everyone could immedately connect to the internet. So, the problem was originating with that server.When I logged in to the Ubuntu server using Webmin, I checked System>Running Processes and right at the top of the list was the process:ID Owner CPU Command23184 www-data 98.1% ./s 174.120.164.186 7777When I drilled down on this process it said that the parent process was:/bin/sh -c ./s 174.120.164.186 7777I pressed the Trace Process button and it appears to be sending the following repeatedly:Time System Call Parameters Returnxxxx send 125,0123456789ABCDE,15,0 15So, I manually Killed the process and added a rule to my firewall/router to block an IP range that includes 174:120:164:186
A few hours later the same process stars again in Ubuntu,, effectively plugging up my pipeline to the internet and preventing access to the websites being hosted.It suspect that there is some kind of virus on my Ubuntu machine but have no idea how to locate and destroy it. I am relatively new to the Ubuntu world and would appreciate anyone's help immensely! I just don't know what to do!
Networking :: Write Network Packets To Memory In Byte Format?
Feb 7, 2011I'm sniffing network packets in ubuntu, I need to write these packets as raw bytes to memory but libpcap give packets in its special format. how can i save and recover packets in byte format?
View 2 Replies View Related
