For backup and pre-functionality purposes, I need to simulate a VirtualHost in my Fedora (14) machine. I found some interesting links to carry out that process but with an IP fix.So, how can I simulate a VH through a localhost with a dynamic IP?
View 2 RepliesTomcat6 is built in server with it but i dont know how to use it .I am doing a dynamic web project based on servlet and eclipse galileo is being used as IDE for it.
View 1 Replies View RelatedThe problem is that I have set up a test installation with DHCP server and DNS server on Fedora 14 and want to set up dynamic updates from the DHCPD to the NAMED. The problem is that any attempts to make updates of the DNS server fails with a "SERVFAIL" error. I can not even update it through the NSUPDATE tool. This is NAMED.CONF:
Code:
options {
directory "/var/named";
[code]....
how do i change the http://localhost/ to my owe name
View 1 Replies View RelatedI'm trying to connect to url, but the browser is unable to connect to the localhost; my OS is F11, if someone have encounter this problem? i was able to connect to the localhost when i had F6 OS.?
View 3 Replies View RelatedI have an installation of Fedora 10 that has been running wonderfully for months, ever since I bombed my 9 installation trying to install Apache Tomcat (I really just wanted Apache, live and learn). I finally decided to brave the attempt to install Apache 2.2 again because I have a little more instruction to go by. Apparently not enough to deal with this snag though, at least not the way I want.
Install went fine, but I couldn't start the service. Following the error trail I found that it was binding IPv6 to port 80 and wouldn't allow any other ip or localhost to use it. I disabled IPv6, don't need it, I'll learn about it later.
I am trying to get my own email server set up, and so far its been going pretty smooth, The only thing that is not working right now is receiving emails. I can send email just fine, and when they are sent they are even sent from the proper addresses, but when I try to send an email to my domain, it does not go through.
I have the port forwards set up on my router to send all traffic on port 25 over to my mail server, I can telnet to the smtp server from the localhost just fine, but when I try to telnet from another computer on my network it gives me this message
Quote:
So I ran a netstat -an on my mail server to see what ip address smtp is listening on and I get this result
Quote:
Now most guides I find for this problem just say to un comment the line in the master.cf that says "smtp inet n - - - - smtpd", the problem is that line is already uncommented and I am still not able to telnet to port 25 from any machine on my network.
Here is my main.cf, tell me if there is anything that I can do.
Quote:
I'm running Fedora 12 on x86_64. I've installed squirrelmail, along with dovecot on my office server, and cannot access it through http://localhost/webmail. I have followed all the configuration steps I could find (including http://www.server-world.info/en/note...12&p=httpd&f=7).
I know that everything else is working (I can send and receive mail, access IMAP mailboxes, webserver is working), browsing to
http://localhost/webmail
just gives me
"Problem loading page"
in Firefox. Sometimes, however the message is "Unable to connect."
I will add that I already tried installing Squirrelmail on another (i686) machine and had exactly the same problem.
/var/log/httpd/error_log says:
File does not exist: /var/www/html/squirrelmail
This makes it seem like aliasing is not working somehow.
Last time I rebooted, sendmail & dovecot started from init and everything worked. I needed to reboot this weekend [new videocard] & yum had given me a new kernel etc.Now.2.6.34.7-56.fc13.i686 running Thunderbird - with 2 accounts chuck@otherserver.com and chuck@localhost.
The "otherserver" account works fine. Localhost won't pull in the mail.
/var/log/maillog says
dovecot: pop3-login: Login: user=<chuck>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured
dovecot: POP3(chuck): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0
[code]....
i have fedora 11 installed in my laptop and apache server by default. after starting httpd and mysqld services i was able to access localhost through browser.(e.g. [URL]). before installing phpMyAdmin everything goes right. after installing phpMyAdmin it created problem in localhost. now typing [URL] it opens joomla site but without images and without intending of content. when i type [URL] in browser it ask for user name and password. i already provide user name(root) and password(my_root_password) in /etc/phpMyAdmin/config.inc.php. but it doesnt open.
View 1 Replies View Relatedi have installed apache and php in my fedora 11 system and httpd works fine except that it doesnt have internet connection for example rapileech doesnt work it says "cannot connect via port 80" and if i put an rss feed collector in a website it doesnt work but everything else works fine , also when i put the same file in a shared web host it works fine
View 3 Replies View RelatedUsing a fresh copy of server 10.04 im trying to simulate a failed raid array on a pair of 2tb disks. Here is the procedure i have been following so far:
- Remove the dead disk partitions from each of the raid 1 arrays (substitute the correct md devices and partitions)
- mdadm /dev/md0 -r /dev/sdb2
- mdadm /dev/md1 -r /dev/sdb3
[code]....
I get an error here that sfdisk does not support gpt (guid partition table). I thought sfdisk did support gpt? It says to use parted, but i cant find a command that copies a partition table over from another disk in parted documentation. Any suggestions? I suppose i could make the partitions manually, but im writing a procedure for people who arent that technical and i need it to be simple enough to be run in my absence. manually building the partitions would be too hard for them.
I can not use nfs from F10 client to F12 server. nfs mount on F10 to F12 times out anf nfs4 mount gives "mount.nfs4: mounting localhost:/home failed, reason given by server: No such file or directory" I have tried to close firewall and set selinux to permissive mode on both client and server with same result. Samba works fine. On server [root@flokipal ~]# mount -t nfs4 localhost:/home /media/tonlist mount.nfs4: mounting localhost:/home failed, reason given by server: No such file or directory
but
[root@flokipal ~]# mount -t nfs localhost:/home /media/tonlist
[root@flokipal ~]#
works
I do not have a webcam yet, but would like to set certain video files I have to be played as my 'streaming video content' from a 'virtual' webcam.
View 6 Replies View RelatedCould not do simulate: nautilus-sendto-2.28.4-1.fc13.i686 requires libedataserver-1.2.so.11
gnome-panel-2.30.0-1.fc13.i686 requires libedataserver-1.2.so.11
empathy-2.30.1.1-1.fc13.i686 requires libedataserver-1.2.so.11 : Success - empty transaction
I was told that it was possible to setup a dynamic dns server on linux. How would you do it?
View 9 Replies View RelatedI want to restrict the Visitors to my Webserver whom i want to give access But the persons whom i want to give access. have Dynamic IP. I want to use DynDNS and update IP address of person. Based on the Hostname Pointing to Dynamic address of person.
View 5 Replies View RelatedHow to get rid of the following error I've been receiving from Yum. I'm fairly new to Fedora. The following message appears when Add/Remove Software is launched. It also pops up periodically in the notification window.
could not do simulate: Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 3270, in __init__
self.repos.confirm_func = self._repo_gpg_confirm
File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 823, in <lambda>
repos = property(fget=lambda self: self._getRepos(),
File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 551, in _getRepos
prerepoconf = self.prerepoconf
AttributeError: 'PackageKitYumBase' object has no attribute 'prerepoconf'
I need to obtain daily dynamic IP address from my router for remote user. In order to get into the router page, I need to login to it with ID and password.
Can I tell the server to do this every time it started up to login to router and extract the ip address and send out via email?
The router can only access through web interface and below is what I copied from browser.
i want to set up an email server both to receive and send emails. I also am on a dynamic ip scheme with my ISP. I do have a dynamic dns account with no-ip.org the Questions are:
-will somebody be able to send emails to me at the <user>@<dyndns_name>.no-ip.org email address?
-will I be able to send emails from the <user>@<dyndns_name>.no-ip.org email address?
I know i'll be able to login to accounts like gmail and yahoo and download emails from there.. but even that i don't know - even macroscopically how its done:
-is it the sendmail deamon that accepts the mail from <me>@gmail.com, <me>@yahoo.com, <me>@<dyndns_name>.no-ip.org?
-is it the sendmail deamon that does the sending of email (as well)?
-can it push emails that I want to send as <me>@gmail.com to the gmail smtp servers (and they in turn will push my email even further)?
-can it push emails from <me>@<dyndns_name>.no-ip.org to receipients?
and finally,
-WILL receiving pop/imap servers allow incoming email from my server? or due to the dynamic ip they'll assume I'm a spam server?
As far as I can tell, the server guides only explain a bit about what dynamic routing is, but not how to implement it.
My situation is this:
We require a server with 3 interfaces. One local, one to a vsat link and the other to a fibre link. The fibre will be the default route for Internet traffic but we want dynamic routing to automatically switch to the vsat link when the fibre link goes down (which happens fairly often in Zimbabwe!) and then switch back to the fibre link when it comes back up again.
The first option would be to handle dynamic routing on a Cisco router, but at the prices of Cisco devices here, it's not the most affordable option.
I have this strange problem which I am unable to web search on and not sure what to do next. My Linux knowledge is between basic to intermediate but I know how to troubleshoot general hardware problems.
My problem is that Ubuntu 9.04 Jaunty 64-bit hangs while SFTP is active and dynamic IP changes. For example, I SFTP into my home server and transfer file then suddenly my ISP decides to renew my IP and give me a new IP while my SFTP client is still uploading files to my home server. This causes my SFTP client to stop working. Upon checking, my router is still running with a new IP lease from my ISP. My Linux box still powers on but typing anything from the keyboard does not make it "wake up" and put things on the monitor. Nothing seems to make it respond and the only way is to get about it is to power off and on. During that time, you cannot SSH into the server as there is no respond. SFTP into the server is not possible too because connection fails.
The server has all new hardware, latest BIOS, etc. Memtest86 shows no errors after running for more then 5 hours. I am unable to find anything out of the norm in /var/log/kern.log or in dmesg. All hardware seems to be working.
When I think about it, I tend to think OpenSSH (probably that is the default package in Jaunty) is causing this system hang whenever there is an interrupted connection from the outside world. However, I fail to agree with this is because I am sure the daemon and Linux can tolerate this situation without resorting to system hang. FYI, I have installed vsftp as well but this should not be a problem.
I have 4 servers that I got at auction and they now have ubuntu running with gnome interface.I installed apache2 and tried to edit the conf file but i am not sure if it is a router issue a dns or the config.I am trying to figure out how to set the server to hold the domain from a dynamic ip address and also how to create some test page to see if i can acess from the internet.
I have purchased some books on the command lines and how ubuntu works, I am understanding it so far, but dont know how to have a directory for the dns request to point to for the sitewhat i want to do with the servers...voipeb server for about 4 websites - one is for a volunteer rescue organization, another for a test auction site and 2 portfolio sitesremote file access- if possiblealso on a side note, is it possible to have a message relay from one cell phone or transmit to the server and have it send sms message to cell phones? - this will be used for the rescue group as well.
Basically im trying to setup a dynamic vlan setup with my Cisco 2950 switch. I understand that freeradius has support for vmps and i'm wanting to use this. (as i'd also use the radius server for authentication for my squid proxy server)
But i have no idea where to start to get this configured. Right now i've got the freeradius package installed and i've done a bit of google'ing and i cant seem to find much about vmps and freeradius.
I am trying to set up postfix on my ubuntu server.When I try to login to the pop accounts through telnet
Code:
user@ubuntu1:/$ telnet localhost 110
Trying ::1...
[code]....
For some rather odd reason, my IRC bot wont connect to the local irc server, but it will connect to IRC.FREENODE.NET, I have no idea why...
PHP Code:
<?php/** PHPIRC Class Simple IRC Bot * * @author Ferdinand E. Silva
[code]...
Have basic LAMP setup on 9.10 box. I want to have a publicly accessible website AND I want to have phpmyadmin available. The only thing is I would rather not have the phpmyadmin interface available on the internet. I usually open a ssh port forwarded tunnel when I need to use phpmyadmin on this server. I want to add a directive to make phpmyadmin bind only on localhost. I have found the phpmyadmin config file in /etc/apache2/conf.d
phpmyadmin.conf -> ../../phpmyadmin/apache.conf
I have tried adding some LISTEN directives, but apache does not like my directives-- I am obviously not doing it right. I have looked for a bit on the internet and can't find out how to disable external access to a configured site in Apache.
Instead of XAMPP or LAMP, I installed a local web server to my Ubuntu 10.04. Apache and phpmyadmin works well.
I copied the files of my Joomla website to /var/www folder. When I go to administrator panel, it works. But when I type in the browser "http://localhost/[folder_name], a blank page appears and nothing else.
OK here's what I'm doing:
On terminal 1, I enter:
$ nc6 -vlp 5000
nc6: listening on 0.0.0.0 5000 ...
On terminal 2, I enter:
$ nc6 -v localhost 5000
nc6: ygt-asfandq (127.0.0.1) 5000 [5000] open
Now, as SOON as I make the connection on terminal 2, both netcats immediately quit back to the command prompt. The return code for both is 0.
I do not have ANYTHING in my firewall (I checked with sudo iptables -v -L)
I have attached a wireshark trace of the conversation..
Howcome mysql by default is only allowing connections from localhost? I want to access it remotely from another account (not root).
View 1 Replies View Related